FORMULATIONS

Manufacturing Process
Phase A: Combine all ingredients of phase A. Raise the pH to 11 to dissolve Cosphagard® SA natural. When everything is dissolved, lower the pH back to 4-5 again.
Phase B: Combine Glycerin, Cosphaderm® X 34 and Cosphaderm® Sodium Hyaluronate high and stir until the powder is wetted. Then add it to phase A.
Phase C: Add phase C under stirring.
Adjust the pH to 4.0 ± 0.05.

Specification
Appearance: Transparent, clear gel
pH: 4.0 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Combine all ingredients of phase B.
Heat both phases separately to 75-80 °C.  Add phase B to A while stirring and then homogenise.
Adjust the pH to 5.5 ± 0.05.

SPECIFICATION
Appearance: white gel cream
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Heat the water phase to 70-75 °C.
Phase B: Combine all ingredients of phase B and heat to 75°C. Phase C is added to the oil phase just before emulsion is formed.
Add phase B+C to the water phase while stirring. Homogenise at 40°C.
Adjust the pH to 5.5 ± 0.05.

SPECIFICATION
Appearance: White cream
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Heat to 70-75 °C.
Phase B: Combine all ingredients of phase B and heat to 75°C. Phase C is added to the oil phase just before emulsion is formed.
Add phase B+C to the water phase while stirring. Homogenise at 40°C.
Adjust the pH to 5.5 ± 0.05.

SPECIFICATION
Appearance: White cream
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

MANUFACTURING PROCESS
Phase A: Combine the ingredients of phase A. Raise the pH to 11 to dissolve Cosphagard® SA natural. When everything is dissolved, lower the pH back to 4-5 again.
Phase B: Add all ingredients from phase B one after another.
Adjust the pH to 4.0 ± 0.05.

SPECIFICATION
Appearance: Clear solution
pH: 4.0 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

Manufacturing Process
Phase A: Combine all ingredients of phase A and stir until everything is homogeneous.
Phase B: Simply add lukewarm water to the bottle, then add in your powder shampoo. Shake for approximately 30 seconds and wait until everything has been dissolved.

Specification
Appearance: Pearlescent gel
pH: 5.5 ± 0.10
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

MANUFACTURING PROCESS
Phase A: Mix all ingredients together and stir until homogeneous.
Phase B: Combine all ingredients and add phase B to A while stirring.

SPECIFICATION
Appearance: White powder
Stability: Microbiological stability proven (Water activity value less than 0.75)

MANUFACTURING PROCESS
Phase A: Combine all ingredients and stir until everything is completely dissolved.
Phase B: Dissolve the menthol in Cosphaderm® Propanediol natural add phase B to phase A under soft stirring.
Phase C: Add all ingredients of phase C and stir until everything is completely dissolved.
Adjust the pH to 7.0 ± 0.05.

SPECIFICATION
Appearance: transparent liquid
pH: 7.0 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Combine all ingredients of phase B.
Heat both phases separately to 75 °C and add phase B to A while homogenising.
Adjust the pH to 5.5 ± 0.05.

SPECIFICATION
Appearance:  white emulsion
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

MANUFACTURING PROCESS
Combine all ingredients of phase A, heating to 75 °C. When everything has melted, add phase B. Take off heat and fill into packaging.

SPECIFICATION
Appearance: Solid, yellowish balm
Stability: Microbiological stability proven (Water activity value less than 0.75)