We understand the requirements and issues of cosmetics formulators. That's why we spend a lot of time on application technology in our in-house laboratory. Here we analyse the incorporation and effect of raw materials in order to offer our customers the best possible support and suitable recommendations.
We have provided a selected set of formulations for download here - enjoy!
HYDRATING. ANTIOXIDANT. REGENERATING.
Alternative preservation: Cosphaderm® LAAS, Cosphaderm® GMCY
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 72.80 | |
| A | Cosphaderm® Propanediol natural | Propanediol | Cosphatec GmbH | 3.00 | |
| A | Cosphaderm® X soft | Xanthan Gum | Cosphatec GmbH | 0.30 | |
| A | Cosphaderm® Sodium Hyaluronate low | Sodium Hyaluronate | Cosphatec GmbH | 0.20 | |
| A | Cosphaderm® PA-12 | Sodium Phytate | Cosphatec GmbH | 0.10 | |
| B | Cosphaderm® SB-75H NON GMO | Hydrogenated Lecithin | Cosphatec GmbH | 0.50 | |
| C | Cosphaderm® GS Connect | Glyceryl Stearate Citrate | Cosphatec GmbH | 2.00 | |
| C | Lanette® O | Cetearyl Alcohol | BASF SE | 3.00 | |
| C | Shea Butter refined | Butyrospermum Parkii Butter | Gustav Heess GmbH | 3.00 | |
| C | Cosphaderm® GMCY | Glyceryl Caprylate | Cosphatec GmbH | 0.30 | |
| C | MCT Oil Typ V Ph. Eur. | Caprylic/Capric Triglyceride | Gustav Heess GmbH | 5.00 | |
| C | Cetiol® OE | Dicaprylyl Ether | BASF SE | 4.00 | |
| C | Grape Seed Oil | Vitis Vinifera Seed Oil | Gustav Heess GmbH | 2.00 | |
| D | Cosphaderm® Tocopharin | Carnosic Acid Tocopherol Helianthus Annuus Seed Oil | Cosphatec GmbH | 0.30 | |
| D | Cosphaderm® LAAS | Glycerin Aqua Sodium Levulinate Sodium Anisate | Cosphatec GmbH | 3.50 |
Manufacturing Process
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Adjust pH to 5 – 6 and add phase B. Heat to 75°C.
Phase C: Combine all ingredients of phase C and heat to 75°C.
Add phase C to phase A/B while stirring.
Phase D: Add phase D under 40 °C and homogenise.
Adjust the pH to 5.5 ± 0.05.
Specification
Appearance: White high viscous cream
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
ANTI-PUFFINESS. ANTI-AGEING. LIGHT TEXTURE.
Alternative preservation: Cosphaderm® LAAS, Cosphaderm® Hexiol natural
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 86.00 | |
| A | Glycerin | Glycerin | - | 2.00 | |
| A | Cosphaderm® X 34 | Xanthan Gum | Cosphatec GmbH | 1.00 | |
| A | Cosphaderm® Hexiol natural | 1,2-Hexanediol | Cosphatec GmbH | 1.50 | |
| B | Cosphaderm® Propanediol natural | Propanediol | Cosphatec GmbH | 4.00 | |
| B | Cosphaderm® Sodium Hyaluronate high | Sodium Hyaluronate | Cosphatec GmbH | 0.20 | |
| B | Cosphaderm® Sodium Hyaluronate low | Sodium Hyaluronate | Cosphatec GmbH | 0.10 | |
| C | Cosphaderm® LAAS | Aqua Glycerin Sodium Levulinate Sodium Anisate | Cosphatec GmbH | 3.00 | |
| C | Sorbitol | Sorbitol | - | 2.00 | |
| C | Caffeine Powder | Caffeine | - | 0.20 |
Manufacturing Process
Phase A: Combine all ingredients of phase A and stir until everything is dissolved.
Phase B: Combine all ingredients of phase B and add to phase A under stirring. Stir until everything is dissolved.
Phase C: Add phase C.
Adjust the pH to 5.5 ± 0.05.
Specification
Appearance: Transparent, viscous gel
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
ANTI-AGING. FAST ABSORBING. HYDRATING.
Alternative preservation: Cosphaderm® HAP
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | Cosphatec GmbH | 93.90 | |
| A | Cosphaderm® HAP | Hydroxyacetophenone | Cosphatec GmbH | 0.60 | |
| B | Glycerin | Glycerin | - | 5.00 | |
| B | Cosphaderm® Sodium Hyaluronate high | Sodium Hyaluronate | Cosphatec GmbH | 0.30 | |
| B | Cosphaderm® Sodium Hyaluronate low | Sodium Hyaluronate | Cosphatec GmbH | 0.20 |
Manufacturing Process
Phase A: Dissolve Phase A at 40°C.
Phase B: Combine all ingredients of phase B separately and add to phase A under stirring.
Adjust pH to 5.5 ± 0.05 if necessary.
Specification
Appearance: Transparent, low viscous serum
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
PORE REFINING. MOISTURISING. SMOOTHING.
Alternative preservation: Cosphaderm® Pentiol natural, Cosphaderm® Zinc Lactate natural
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 88.50 | |
| A | Cosphaderm® Pentiol natural | Pentylene Glycol | Cosphatec GmbH | 2.00 | |
| A | Panthenol | Panthenol Aqua | - | 0.50 | |
| B | Glycerin | Glycerin | - | 3.00 | |
| B | Cosphaderm® Sodium Hyaluronate high | Sodium Hyaluronate | Cosphatec GmbH | 0.30 | |
| B | Cosphaderm® Sodium Hyaluronate low | Sodium Hyaluronate | Cosphatec GmbH | 0.20 | |
| C | Cosphaderm® Zinc Lactate natural | Zinc Lactate | Cosphatec GmbH | 0.50 | |
| C | RonaCare® Niacinamide | Niacinamide | SUSONITY | 5.00 |
Manufacturing Process
Phase A: Combine all ingredients of phase A.
Phase B: Combine all ingredients of phase B separately and add to phase A under stirring.
Phase C: Add phase C to A/B and stir until everything is completely dissolved.
Adjust pH to 5.5 ± 0.05.
Specification
Appearance: Transparent, low viscous serum
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
HYDRATING. REFRESHING. SKIN REFINING.
Alternative preservation: Cosphaderm® Pentiol GL, Cosphaderm® Hexiol
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 84.00 | |
| A | Glycerin | Glycerin | - | 5.00 | |
| A | Cosphaderm® Pentiol GL | Pentylene Glycol | Cosphatec GmbH | 3.00 | |
| A | Cosphaderm® Hexiol | 1,2-Hexanediol | Cosphatec GmbH | 1.50 | |
| A | RonaCare® Nicotinamide | Niacinamide | SUSONITY | 4.00 | |
| A | Panthenol | Panthenol Aqua | - | 2.00 | |
| A | Cosphaderm® Sodium Hyaluronate low | Sodium Hyaluronate | Cosphatec GmbH | 0.10 | |
| B | Carbopol® Ultrez-21 | Acrylates/C10-30 Alkyl Acrylate Crosspolymer | Lubrizol | 0.40 |
Manufacturing Process
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Add phase B to phase A under stirring.
Adjust the pH to 6.0 ± 0.05 to thicken the formulation.
Specification
Appearance: Transparent, clear, viscous gel
pH: 6.0 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
ANTI-AGING. PORE-REFINING. HYDRATING.
Alternative preservation: Cosphaderm® Heptiol natural
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 87.65 | |
| A | Cosphaderm® Heptiol natural | 1,2-Heptanediol | Cosphatec GmbH | 1.00 | |
| A | Glycerin | Glycerin | - | 2.00 | |
| A | Inulin | Inulin | - | 1.00 | |
| A | Sodium PCA | Sodium PCA | - | 0.50 | |
| A | RonaCare® Nicotinamide | Niacinamide | SUSONITY | 5.00 | |
| B | Sodium Ascorbyl Phosphate | Sodium Ascorbyl Phosphate | - | 2.00 | |
| B | Sodium Gluconate | Sodium Gluconate | - | 0.15 | |
| C | Cosphaderm® Sodium Hyaluronate low | Sodium Hyaluronate | Cosphatec GmbH | 0.20 | |
| C | Cosphaderm® Sodium Hyaluronate high | Sodium Hyaluronate | Cosphatec GmbH | 0.30 | |
| C | Cosphaderm® X soft | Xanthan Gum | Cosphatec GmbH | 0.20 |
Manufacturing Process
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Add phase B to phase A.
Phase C: Add phase C and stir until everything is completely dissolved.
Adjust pH to 6.5 ± 0.05 if necessary.
Specification
Appearance: Transparent, low viscous serum
pH: 6.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
ANTI-AGEING. ANTIOXIDANT. MOISTURISING.
Alternative preservation: Cosphaderm® Dicapo natural, Cosphaderm® Magnolia Extract 98, Cosphaderm® Propanediol natural
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 77.30 | |
| A | Cosphaderm® Propanediol natural | Propanediol | Cosphatec GmbH | 3.00 | |
| A | Cosphaderm® X soft | Xanthan Gum | Cosphatec GmbH | 0.80 | |
| A | Cosphaderm® Sodium Hyaluronate high | Sodium Hyaluronate | Cosphatec GmbH | 0.10 | |
| A | Cosphaderm® Sodium Hyaluronate low | Sodium Hyaluronate | Cosphatec GmbH | 0.10 | |
| A | Sodium PCA | Sodium PCA | - | 0.50 | |
| A | Sodium Citrate | Sodium Citrate | - | 0.50 | |
| A | Cosphaderm® SF-75H | Hydrogenated Lecithin | Cosphatec GmbH | 1.50 | |
| B | Cosphaderm® GS Connect | Glyceryl Stearate Citrate | Cosphatec GmbH | 2.00 | |
| B | Shea Butter refined | Butyrospermum Parkii Butter | Gustav Heess GmbH | 2.00 | |
| B | Jojoba Oil | Simmondsia Chinensis Seed Oil | Gustav Heess GmbH | 4.00 | |
| B | MCT Oil Typ V Ph. Eur. | Caprylic/Capric Triglyceride | Gustav Heess GmbH | 5.00 | |
| B | Camellia Seed Oil | Camellia Oleifera Seed Oil | - | 2.00 | |
| C | Cosphaderm® Dicapo natural | Caprylyl Glycol Propanediol Glyceryl Caprylate | Cosphatec GmbH | 0.70 | |
| C | Cosphaderm® Magnolia Extract 98 | Magnolia Officinalis Bark Extract | Cosphatec GmbH | 0.20 | |
| D | Cosphaderm® Tocopharin | Tocopherol Helianthus Annuus Seed Oil Carnosic Acid | Cosphatec GmbH | 0.30 |
Manufacturing Process
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Combine all ingredients of phase B.
Heat both phases separately to 70-75 °C and add phase B to A while stirring. Then homogenise the formulation.
Phase C: Dissolve Cosphaderm® Magnolia Extract 98 in Cosphaderm® Dicapo natural.
Add phase C and phase D to phase A+B after cooling to 40 °C while stirring. Adjust the pH to 5.5 ± 0.05.
Specification
Appearance: Light beige, shiny, fluid emulsion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
ANTI-AGING. REGENERATING. SMOOTHING.
Alternative preservation: Cosphaderm® MultiMEG
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 83.10 | |
| A | Glycerin | Glycerin | - | 5.00 | |
| A | Cosphaderm® PA-12 | Sodium Phytate | Cosphatec GmbH | 0.10 | |
| A | Cosphaderm® X soft | Xanthan Gum | Cosphatec GmbH | 0.40 | |
| A | Cosphaderm® Sodium Hyaluronate high | Sodium Hyaluronate | Cosphatec GmbH | 0.20 | |
| A | Cosphaderm® Sodium Hyaluronate low | Sodium Hyaluronate | Cosphatec GmbH | 0.10 | |
| B | Olivem® 1000 | Cetearyl Olivate Sorbitan Olivate | Hallstar | 2.50 | |
| B | MCT Oil Typ V Ph. Eur. | Caprylic/Capric Triglyceride | Gustav Heess GmbH | 5.00 | |
| B | Grape Seed Oil | Vitis Vinifera Seed Oil | Gustav Heess GmbH | 2.00 | |
| B | Cosphaderm® T-70 NON GMO ECO | Tocopherol Helianthus Annuus Seed Oil | Cosphatec GmbH | 0.20 | |
| C | Cosphaderm® MultiMEG | Glyceryl Caprylate Pentylene Glycol Magnolia Officinalis Bark Extract | Cosphatec GmbH | 1.40 |
Manufacturing Process
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Heat to 75 °C.
Phase B: Combine all ingredients and heat to 75 °C. Add then phase B to phase A under strong stirring and homogenise.
Phase C: Add phase C to the formulation and stir.
Adjust the pH to 5.5 ± 0.05.
Specification
Appearance: White, fluid emulsion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
MOISTURISING. NURTURING. ANTI-AGEING.
Preservation: Cosphagard® Pol
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 72.70 | |
| A | Cosphaderm® Sodium Hyaluronate low | Sodium Hyaluronate | Cosphatec GmbH | 0.20 | |
| A | Cosphaderm® X 34 | Xanthan Gum | Cosphatec GmbH | 0.50 | |
| A | Cosphagard® Pol | Aqua Sodium Levulinate Potassium Sorbate | Cosphatec GmbH | 2.00 | |
| B | Cosphaderm® Propanediol natural | Propanediol | Cosphatec GmbH | 3.00 | |
| B | Sesame Oil | Sesamum Indicum Seed Oil | Gustav Heess GmbH | 4.00 | |
| B | Evening Primrose Oil | Oenothera Biennis Oil | Gustav Heess GmbH | 3.00 | |
| B | Jojoba Oil | Simmondsia Chinensis Seed Oil | Gustav Heess GmbH | 3.00 | |
| B | Shea Butter refined | Butyrospermum Parkii Butter | Gustav Heess GmbH | 3.00 | |
| B | Wheat Germ Oil | Triticum Vulgare Oil | Gustav Heess GmbH | 2.00 | |
| B | Almond Oil | Prunus Amygdalus Dulcis Oil | Gustav Heess GmbH | 2.00 | |
| B | Imwitor 960 K | Glyceryl Stearate SE | IOI Oleo GmbH | 3.00 | |
| B | Cosphaderm® T-70 NON GMO ECO | Tocopherol Helianthus Annuus Seed Oil | Cosphatec GmbH | 0.10 | |
| B | Lanette® O | Cetearyl Alcohol | BASF SE | 0.50 | |
| B | Cosphaderm® GS Connect | Glyceryl Stearate Citrate | Cosphatec GmbH | 1.00 |
Manufacturing Process
Phase A: Combine all ingredients of phase A under stirring until Cosphaderm® X 34 is completely dissolved.
Phase B: Combine all ingredients of phase B.
Heat both phases separately to 70 °C and add phase B to phase A under stirring.
After stirring homogenise the formulation and adjust the pH to 5.5 ± 0.05.
Specification
Appearance: White, shiny, low viscous emulsion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
ANTI-POLLUTION. HIGH SPREADABILITY. ANTI-AGEING.
Alternative preservation: Cosphaderm® Leo, Cosphaderm® Propanediol natural
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 64.30 | |
| A | Cosphaderm® Sodium Hyaluronate | Sodium Hyaluronate | Cosphatec GmbH | 0.10 | |
| A | Cosphaderm® Sodium Hyaluronate low | Sodium Hyaluronate | Cosphatec GmbH | 0.10 | |
| A | Cosphaderm® Propanediol natural | Propanediol | Cosphatec GmbH | 10.00 | |
| A | Cosphaderm® X soft | Xanthan Gum | Cosphatec GmbH | 0.50 | |
| A | Cosphaderm® Leo | Dipropylene Glycol Ethylhexylglycerin Caprylhydroxamic Acid | Cosphatec GmbH | 2.70 | |
| B | Cosphaderm® SF-75H | Hydrogenated Lecithin | Cosphatec GmbH | 3.00 | |
| B | Lanette® 16 | Cetyl Alcohol | BASF SE | 1.00 | |
| B | Cosphaderm® Feel | Triheptanoin | Cosphatec GmbH | 4.00 | |
| B | Babassu Oil | Orbignya Oleifera Seed Oil | Gustav Heess GmbH | 4.00 | |
| B | Apricot Kernel Oil | Prunus Armeniaca Kernel Oil | Gustav Heess GmbH | 4.00 | |
| B | Sesame Oil | Sesamum Indicum Seed Oil | Gustav Heess GmbH | 3.00 | |
| B | Evening Primrose Oil | Oenothera Biennis Oil | Gustav Heess GmbH | 1.00 | |
| B | Rosehip Seed Oil | Rosa Canina Fruit Oil | Gustav Heess GmbH | 1.00 | |
| B | Grape Seed Oil | Vitis Vinifera Seed Oil | Gustav Heess GmbH | 1.00 | |
| B | Cosphaderm® T-70 NON GMO | Tocopherol Helianthus Annuus Seed Oil | Cosphatec GmbH | 0.20 | |
| B | Cosphaderm® E-1000 NON GMO | Tocopherol Helianthus Annuus Seed Oil | Cosphatec GmbH | 0.10 |
Manufacturing Process
Phase A: Prepare phase A and stir until complete dissolution.
Phase B: Prepare phase B and heat to 50 °C until everything is melted. Let the mixture cool down to room temperature.
Add phase B to phase A and homogenise.
Adjust the pH to 5.5 ± 0.05.
Specification
Appearance: White, viscous emulsion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
QUICKLY ABSORBING. RICH SKIN FEEL. HYDRATING.
Alternative preservation: Cosphaderm® LA-T, Cosphaderm® Sodium pAS natural
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 82.20 | |
| A | Glycerin | Glycerin | - | 4.00 | |
| A | Cosphaderm® X soft | Xanthan Gum | Cosphatec GmbH | 1.00 | |
| A | Cosphaderm® Sodium Hyaluronate low | Sodium Hyaluronate | Cosphatec GmbH | 0.20 | |
| A | Cosphaderm® LA-T | Levulinic Acid Glycerin Sodium Levulinate Aqua | Cosphatec GmbH | 1.20 | |
| B | Cosphaderm® Sodium pAS natural | Sodium Anisate | Cosphatec GmbH | 0.40 | |
| C | Cosphaderm® SF-75H | Hydrogenated Lecithin | Cosphatec GmbH | 3.50 | |
| C | Sunflower Oil | Helianthus Annuus Seed Oil | Gustav Heess GmbH | 5.00 | |
| C | Jojoba Oil | Simmondsia Chinensis Seed Oil | Gustav Heess GmbH | 2.50 |
Manufacturing Process
Phase A: Prepare phase A and stir until everything is completely dissolved. Adjust pH value to 5.5.
Phase B: Add Cosphaderm® Sodium pAS natural to phase A under stirring.
Phase C: Prepare phase C and add it to phase A/B. Homogenise.
Adjust pH value to 5.5 ± 0.05.
Specification
Appearance: Beige, shiny, low viscous emulsion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
QUICKLY ABSORBING. RICH SKIN FEEL. HYDRATING.
Alternative preservation: Cosphaderm® LA-T, Cosphaderm® pAS natural
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 82.20 | |
| A | Cosphaderm® pAS natural | p-Anisic Acid | Cosphatec GmbH | 0.40 | |
| A | Cosphaderm® LA-T | Levulinic Acid Glycerin Sodium Levulinate Aqua | Cosphatec GmbH | 1.20 | |
| B | Glycerin | Glycerin | - | 4.00 | |
| B | Cosphaderm® X soft | Xanthan Gum | Cosphatec GmbH | 1.00 | |
| B | Cosphaderm® Sodium Hyaluronate low | Sodium Hyaluronate | Cosphatec GmbH | 0.20 | |
| C | Cosphaderm® SF-75H | Hydrogenated Lecithin | Cosphatec GmbH | 3.50 | |
| C | Sunflower Oil | Helianthus Annuus Seed Oil | Gustav Heess GmbH | 5.00 | |
| C | Jojoba Oil | Simmondsia Chinensis Seed Oil | Gustav Heess GmbH | 2.50 |
Manufacturing Process
Phase A: Prepare phase A. Raise the pH to 10 to dissolve Cosphaderm® pAS natural and stir until everything is completely dissolved. Afterwards, adjust the pH to 5.5 ± 0.05 by adding Citric Acid.
Phase B: Prepare phase B and add it to phase A while stirring. Stir until everything is completely dissolved.
Phase C: Prepare phase C and add it to phase A/B. Homogenise.
Adjust pH value to 5.5 ± 0.05.
Specification
Appearance: Beige, shiny, low viscous emulsion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
QUICKLY ABSORBING. RICH SKIN FEEL. HYDRATING.
Alternative preservation: Cosphaderm® LA-T, Cosphaderm® AS
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 82.20 | |
| A | Cosphaderm® AS | p-Anisic Acid | Cosphatec GmbH | 0.40 | |
| A | Cosphaderm® LA-T | Levulinic Acid Glycerin Sodium Levulinate Aqua | Cosphatec GmbH | 1.20 | |
| B | Glycerin | Glycerin | - | 4.00 | |
| B | Cosphaderm® X soft | Xanthan Gum | Cosphatec GmbH | 1.00 | |
| B | Cosphaderm® Sodium Hyaluronate low | Sodium Hyaluronate | Cosphatec GmbH | 0.20 | |
| C | Cosphaderm® SF-75H | Hydrogenated Lecithin | Cosphatec GmbH | 3.50 | |
| C | Sunflower Oil | Helianthus Annuus Seed Oil | Gustav Heess GmbH | 5.00 | |
| C | Jojoba Oil | Simmondsia Chinensis Seed Oil | Gustav Heess GmbH | 2.50 |
Manufacturing Process
Phase A: Prepare phase A. Raise the pH to 10 to dissolve Cosphaderm® AS natural and stir until everything is completely dissolved. Afterwards, adjust the pH to 5.5 ± 0.05 by adding Citric Acid.
Phase B: Prepare phase B and add it to phase A while stirring. Stir until everything is completely dissolved.
Phase C: Prepare phase C and add it to phase A/B. Homogenise.
Adjust pH value to 5.5 ± 0.05.
Specification
Appearance: Beige, shiny, low viscous emulsion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
SOOTHING. MOISTURISING. ANTI-BLEMISH.
Alternative preservation: Cosphaderm® Hexiol, Cosphaderm® Zinc Lactate natural, Cosphaderm® Magnolia Extract 98
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 74.65 | |
| A | Cosphaderm® Zinc Lactate natural | Zinc Lactate | Cosphatec GmbH | 0.50 | |
| A | Glycerin | Glycerin | - | 3.00 | |
| A | Cosphaderm® Hexiol natural | 1,2-Hexanediol | Cosphatec GmbH | 2.00 | |
| A | Cosphaderm® Sodium Hyaluronate high | Sodium Hyaluronate | Cosphatec GmbH | 0.10 | |
| A | Cosphaderm® Sodium Hyaluronate low | Sodium Hyaluronate | Cosphatec GmbH | 0.10 | |
| A | Cosphaderm® X 34 | Xanthan Gum | Cosphatec GmbH | 0.40 | |
| B | Olivem® 1000 | Cetearyl Olivate Sorbitan Olivate | Hallstar | 3.00 | |
| B | Lanette® 16 | Cetyl Alcohol | BASF SE | 2.00 | |
| B | Macadamia Oil | Macadamia Ternifolia Seed Oil | Gustav Heess GmbH | 4.00 | |
| B | MCT Oil Typ V Ph. Eur. | Caprylic/Capric Triglyceride | Gustav Heess GmbH | 4.00 | |
| B | Shea Butter refined | Butyrospermum Parkii Butter | Gustav Heess GmbH | 5.00 | |
| B | Evening Primrose Oil | Oenothera Biennis Oil | Gustav Heess GmbH | 1.00 | |
| B | Cosphaderm® T-70 NON GMO ECO | Tocopherol Helianthus Annuus Seed Oil | Cosphatec GmbH | 0.20 | |
| C | Cosphaderm® Magnolia Extract 98 | Magnolia Officinalis Bark Extract | Cosphatec GmbH | 0.05 |
Manufacturing Process
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Heat to 70-75 °C.
Phase B: Combine all ingredients of phase B and heat to 75°C. Phase C is added to the oil phase just before emulsion is formed.
Add phase B+C to the water phase while stirring. Homogenise at 40°C.
Adjust the pH to 5.5 ± 0.05.
Specification
Appearance: White, viscous cream
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
ANTI-AGEING. MOISTURISING. SOOTHING.
Alternative preservation: Cosphaderm® Hexiol natural, Cosphaderm® Sodium pAS natural
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 87.10 | |
| A | Cosphaderm® Propanediol natural | Propanediol | Cosphatec GmbH | 4.00 | |
| A | Cosphaderm® Hexiol natural | 1,2-Hexanediol | Cosphatec GmbH | 2.00 | |
| A | Panthenol | Panthenol Aqua | - | 0.50 | |
| A | Aloe Vera Powder | Aloe Barbadensis Leaf Juice Powder | Worlée-Chemie GmbH | 0.10 | |
| A | Ronacare® Allantoin | Allantoin | SUSONITY | 0.20 | |
| A | Cosphaderm® Sodium pAS natural | Sodium Anisate | Cosphatec GmbH | 0.30 | |
| B | Glycerin | Glycerin | - | 5.00 | |
| B | Cosphaderm® X 34 | Xanthan Gum | Cosphatec GmbH | 0.50 | |
| B | Cosphaderm® Sodium Hyaluronate high | Sodium Hyaluronate | Cosphatec GmbH | 0.20 | |
| B | Cosphaderm® Sodium Hyaluronate low | Sodium Hyaluronate | Cosphatec GmbH | 0.10 |
Manufacturing Process
Phase A: Combine all ingredients of phase A.
Phase B: Prepare phase B and slowly add to phase A under stirring. Continue stirring until everything is completely dissolved.
Adjust pH to 5.5 ± 0.05.
Specification
Appearance: Transparent, low viscous serum
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
HYDRATING. RELAXING. CALMING.
Alternative preservation: Cosphaderm® Hexiol, Cosphaderm® Pentiol GL, Cosphaderm® Propanediol natural
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 82.80 | |
| A | Cosphaderm® Hexiol | 1,2-Hexanediol | Cosphatec GmbH | 1.00 | |
| A | Cosphaderm® Pentiol GL | Pentylene Glycol | Cosphatec GmbH | 5.00 | |
| B | Glycerin | Glycerin | - | 5.00 | |
| B | Cosphaderm® Propanediol natural | Propanediol | Cosphatec GmbH | 5.00 | |
| B | Cosphaderm® X 34 | Xanthan Gum | Cosphatec GmbH | 0.50 | |
| B | Cosphaderm® KG | Amorphophallus Konjac Root Extract | Cosphatec GmbH | 0.50 | |
| B | Cosphaderm® Sodium Hyaluronate low | Sodium Hyaluronate | Cosphatec GmbH | 0.20 |
Manufacturing Process
Phase A: Prepare phase A.
Phase B: Pre-disperse phase B and add to the water phase while stirring. Stir until everything is completely dissolved.
Adjust the pH to 5.5 – 6.0 ± 0.05.
Heat the mixture to its boiling point and keep this temperature for 2 – 3 minutes.
Quickly pour the hot mixture into a casting mould and let it cool.
Specification
Appearance: Transparent or coloured, elastic jelly patch
pH: 5.5 – 6.0 ± 0.05
Stability: Stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
HYDRATING. REFRESHING. ANTI-AGEING.
Alternative preservation: Cosphaderm® Heptiol natural, Cosphaderm® Pentiol natural
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 87.60 | |
| A | Cosphaderm® Pentiol natural | Pentylene Glycol | Cosphatec GmbH | 4.00 | |
| A | Cosphaderm® Heptiol natural | 1,2-Heptanediol | Cosphatec GmbH | 1.00 | |
| B | Glycerin | Glycerin | - | 3.00 | |
| B | Cosphaderm® Sodium Hyaluronate high | Sodium Hyaluronate | Cosphatec GmbH | 0.20 | |
| B | Cosphaderm® Sodium Hyaluronate low | Sodium Hyaluronate | Cosphatec GmbH | 0.20 | |
| B | Cosphaderm® X 34 | Xanthan Gum | Cosphatec GmbH | 0.50 | |
| B | Cosphaderm® KG | Amorphophallus Konjac Root Extract | Cosphatec GmbH | 0.50 | |
| B | RonaCare® Nicotinamide | Niacinamide | SUSONITY | 3.00 |
Manufacturing Process
Phase A: Prepare phase A.
Phase B: Pre-disperse phase B and add to the water phase while stirring. Stir until everything is completely dissolved.
Adjust the pH to 5.5 – 6.0 ± 0.05.
Heat the mixture to 80-90°C and keep this temperature for 2 – 3 minutes.
Quickly pour the hot mixture into moulds and let it cool down.
Specification
Appearance: Transparent or coloured, elastic jelly patch
pH: 5.5 – 6.0 ± 0.05
Stability: Stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
REFRESHING. SKIN BOOSTING. TWO-PHASE SYSTEM.
Alternative preservation: Cosphaderm® Propanediol natural, Cosphaderm® Hexiol
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 76.05 | |
| A | Aloe Vera Powder | Aloe Barbadensis Leaf Juice Powder | - | 0.05 | |
| A | RonaCare® Nicotinamide | Niacinamide | SUSONITY | 3.50 | |
| A | Cosphaderm® Sodium Hyaluronate low | Sodium Hyaluronate | Cosphatec GmbH | 0.20 | |
| A | Panthenol | Panthenol Aqua | - | 1.00 | |
| A | Cosphaderm® Hexiol | 1,2-Hexanediol | Cosphatec GmbH | 1.50 | |
| A | Cosphaderm® Propanediol natural | Propanediol | Cosphatec GmbH | 5.00 | |
| A | Cosphaderm® PA ECONAT | Phytic Acid Aqua | Cosphatec GmbH | 0.10 | |
| B | Olive Oil | Olea Europaea Fruit Oil | Gustav Heess GmbH | 3.50 | |
| B | Argan Oil | Argania Spinosa Kernel Oil | Gustav Heess GmbH | 2.50 | |
| B | Avocado Oil | Persea Gratissima Oil | Gustav Heess GmbH | 2.00 | |
| B | Evening Primrose Oil | Oenothera Biennis Oil | Gustav Heess GmbH | 1.50 | |
| B | Rosehip Seed Oil | Rosa Canina Fruit Oil | Gustav Heess GmbH | 1.00 | |
| B | Jojoba Oil | Simmondsia Chinensis Seed Oil | Gustav Heess GmbH | 1.50 | |
| B | Macadamia Nut Oil | Macadamia Ternifolia Seed Oil | Gustav Heess GmbH | 0.50 | |
| B | Cosphaderm® T-70 NON GMO | Tocopherol Helianthus Annuus Seed Oil | Cosphatec GmbH | 0.10 |
Manufacturing Process
Phase A: Combine all ingredients of phase A and stir until complete dissolution.
Adjust the pH value to 5.5 ± 0.05.
Phase B: Prepare phase B in a separate beaker.
Add phase B to phase A without stirring and pour mixture into spray flask.
Specification
Appearance: Liquid two-phase system with oil phase on top of transparent water phase
pH: 5.5 ± 0.05
Stability: Stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
QUICKLY ABSORBING. RICH SKIN FEEL. HYDRATING.
Alternative preservation: Cosphaderm® LA-T, Cosphaderm® Sodium pAS natural
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 59.70 | |
| A | Glycerin | Glycerin | - | 4.00 | |
| A | Cosphaderm® X soft | Xanthan Gum | Cosphatec GmbH | 1.00 | |
| A | Cosphaderm® Sodium Hyaluronate low | Sodium Hyaluronate | Cosphatec GmbH | 0.20 | |
| A | Cosphaderm® LA-T | Levulinic Acid Glycerin Sodium Levulinate Aqua | Cosphatec GmbH | 1.20 | |
| B | Cosphaderm® Sodium pAS natural | Sodium Anisate | Cosphatec GmbH | 0.40 | |
| C | Demin. Water | Aqua | - | 22.50 | |
| C | Cosphaderm® SB-75H | Hydrogenated Lecithin | Cosphatec GmbH | 3.50 | |
| C | Sunflower Oil | Helianthus Annuus Seed Oil | Gustav Heess GmbH | 5.00 | |
| C | Jojoba Oil | Simmondsia Chinensis Seed Oil | Gustav Heess GmbH | 2.50 |
Manufacturing Process
Phase A: Prepare phase A and stir until everything is completely dissolved. Adjust pH value to 5.5.
Phase B: Add Cosphaderm® Sodium pAS natural to phase A under stirring.
Phase C: Prepare phase C and homogenise for 5 minutes with high performance disperser (stator/rotor) at max. speed.
Add phase C to phase A+B in small steps under stirring.
Adjust pH value to 5.5 ± 0.05.
Specification
Appearance: Shiny liquid emulsion
pH: 5.5 ± 0.05
Stability: no separation after centrifugation (4000 rpm, 30 min)
LONG-LASTING COLOUR. WEIGHTLESS FEEL.
MOISTURISING.
Alternative preservation: Cosphaderm® Hexiol natural,
Cosphaderm® Octiol natural
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 85.15 | |
| A | Cosphaderm® Hexiol natural | 1,2-Hexanediol | Cosphatec GmbH | 1.50 | |
| A | Cosphaderm® Octiol natural | Caprylyl Glycol | Cosphatec GmbH | 0.30 | |
| A | Sorbitol | Sorbitol | - | 2.00 | |
| B | Glycerin | Glycerin | - | 1.00 | |
| B | Cosphaderm® Propanediol natural palm free | Propanediol | Cosphatec GmbH | 3.00 | |
| B | Cosphaderm® Butiol natural | Butylene Glycol | Cosphatec GmbH | 5.00 | |
| B | Cosphaderm® X 34 | Xanthan Gum | Cosphatec GmbH | 0.40 | |
| B | Pullulan | Pullulan | - | 1.00 | |
| B | Cosphaderm® Sodium Hyaluronate high | Sodium Hyaluronate | Cosphatec GmbH | 0.10 | |
| B | Cosphaderm® Sodium Hyaluronate low | Sodium Hyaluronate | Cosphatec GmbH | 0.05 | |
| C | Unicert Red K7057_J | CI 17200 | SENSIENT BEAUTY | 0.10 | |
| C | FD&C Red 40 07700-C | CI 16035 | SENSIENT BEAUTY | 0.35 | |
| C | Unicert Red K7061-J | CI 45380 | SENSIENT BEAUTY | 0.05 |
Manufacturing Process
Phase A: Combine all ingredients of phase A.
Phase B: Prepare phase B and slowly add to phase A under stirring. Continue stirring until everything is
completely dissolved.
Phase C: Add phase C and stir until everything is homogeneous.
Adjust pH value to 5.50 ± 0.05.
Specification
Appearance: Clear, red, low viscous solution
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature
and 40 °C
Microbiological stability: proven
GENTLE. CLEANSING. REGENERATING.
Alternative preservation: Cosphaderm® Sodium LAAS, Cosphaderm® GMCY
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 68.40 | |
| A | Glycerin | Glycerin | - | 5.00 | |
| A | Sodium PCA | Sodium PCA | - | 0.50 | |
| A | Sodium Chloride | Sodium Chloride | - | 0.50 | |
| A | Cosphaderm® Sodium LAAS | Sodium Levulinate Sodium Anisate | Cosphatec GmbH | 1.00 | |
| A | Cosphaderm® Sodium Hyaluronate low | Sodium Hyaluronate | Cosphatec GmbH | 0.10 | |
| B | Jojoba Oil | Simmondsia Chinensis Seed Oil | Gustav Heess GmbH | 10.00 | |
| B | Almond Oil | Prunus Amygdalus Dulcis Oil | Gustav Heess GmbH | 7.00 | |
| B | Cetiol® CC | Dicaprylyl Carbonate | BASF SE | 4.00 | |
| B | Rosehip Seed Oil | Rosa Canina Fruit Oil | Gustav Heess GmbH | 3.00 | |
| B | Cosphaderm® GMCY | Glyceryl Caprylate | Cosphatec GmbH | 0.30 | |
| B | Cosphaderm® T-70 NON GMO ECO | Tocopherol Helianthus Annuus Seed Oil | Cosphatec GmbH | 0.20 |
Manufacturing Process
Phase A: Combine all ingredients of phase A and stir until complete dissolution.
Adjust the pH value to 5.5 ± 0.05.
Phase B: Prepare phase B in a separate beaker.
Add phase B to phase A without stirring.
Specification
Appearance: Two-phase system with yellowish oil phase on top of a clear water phase
pH: 5.5 ± 0.05
Stability: stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
Newsletter
Register now for our e-mail newsletter and receive the latest information on our products.
Product-relevant information needs to be added here.
