Wir verstehen die Anforderungen und Fragestellungen von Kosmetik-Entwicklern. Darum verbringen wir viel Zeit mit Anwendungstechnik in unserem In-House Labor. Hier untersuchen wir die Einarbeitung und Wirkung von Rohstoffen, um unseren Kunden den bestmöglichen Support und passende Empfehlungen bieten zu können.
Ein ausgewähltes Set an Formulierungen haben wir hier zum Download bereitgestellt – viel Spaß damit!
HYDRATING. ANTIOXIDANT. REGENERATING.
Alternative preservation: Cosphaderm® LAAS, Cosphaderm® GMCY
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 72.80 | |
| A | Cosphaderm® Propanediol natural | Propanediol | Cosphatec GmbH | 3.00 | |
| A | Cosphaderm® X soft | Xanthan Gum | Cosphatec GmbH | 0.30 | |
| A | Cosphaderm® Sodium Hyaluronate low | Sodium Hyaluronate | Cosphatec GmbH | 0.20 | |
| A | Cosphaderm® PA-12 | Sodium Phytate | Cosphatec GmbH | 0.10 | |
| B | Cosphaderm® SB-75H NON GMO | Hydrogenated Lecithin | Cosphatec GmbH | 0.50 | |
| C | Cosphaderm® GS Connect | Glyceryl Stearate Citrate | Cosphatec GmbH | 2.00 | |
| C | Lanette® O | Cetearyl Alcohol | BASF SE | 3.00 | |
| C | Shea Butter refined | Butyrospermum Parkii Butter | Gustav Heess GmbH | 3.00 | |
| C | Cosphaderm® GMCY | Glyceryl Caprylate | Cosphatec GmbH | 0.30 | |
| C | MCT Oil Typ V Ph. Eur. | Caprylic/Capric Triglyceride | Gustav Heess GmbH | 5.00 | |
| C | Cetiol® OE | Dicaprylyl Ether | BASF SE | 4.00 | |
| C | Grape Seed Oil | Vitis Vinifera Seed Oil | Gustav Heess GmbH | 2.00 | |
| D | Cosphaderm® Tocopharin | Carnosic Acid Tocopherol Helianthus Annuus Seed Oil | Cosphatec GmbH | 0.30 | |
| D | Cosphaderm® LAAS | Glycerin Aqua Sodium Levulinate Sodium Anisate | Cosphatec GmbH | 3.50 |
Manufacturing Process
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Adjust pH to 5 – 6 and add phase B. Heat to 75°C.
Phase C: Combine all ingredients of phase C and heat to 75°C.
Add phase C to phase A/B while stirring.
Phase D: Add phase D under 40 °C and homogenise.
Adjust the pH to 5.5 ± 0.05.
Specification
Appearance: White high viscous cream
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
ANTI-PUFFINESS. ANTI-AGEING. LIGHT TEXTURE.
Alternative preservation: Cosphaderm® LAAS, Cosphaderm® Hexiol natural
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 86.00 | |
| A | Glycerin | Glycerin | - | 2.00 | |
| A | Cosphaderm® X 34 | Xanthan Gum | Cosphatec GmbH | 1.00 | |
| A | Cosphaderm® Hexiol natural | 1,2-Hexanediol | Cosphatec GmbH | 1.50 | |
| B | Cosphaderm® Propanediol natural | Propanediol | Cosphatec GmbH | 4.00 | |
| B | Cosphaderm® Sodium Hyaluronate high | Sodium Hyaluronate | Cosphatec GmbH | 0.20 | |
| B | Cosphaderm® Sodium Hyaluronate low | Sodium Hyaluronate | Cosphatec GmbH | 0.10 | |
| C | Cosphaderm® LAAS | Aqua Glycerin Sodium Levulinate Sodium Anisate | Cosphatec GmbH | 3.00 | |
| C | Sorbitol | Sorbitol | - | 2.00 | |
| C | Caffeine Powder | Caffeine | - | 0.20 |
Manufacturing Process
Phase A: Combine all ingredients of phase A and stir until everything is dissolved.
Phase B: Combine all ingredients of phase B and add to phase A under stirring. Stir until everything is dissolved.
Phase C: Add phase C.
Adjust the pH to 5.5 ± 0.05.
Specification
Appearance: Transparent, viscous gel
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
ANTI-AGING. FAST ABSORBING. HYDRATING.
Alternative preservation: Cosphaderm® HAP
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | Cosphatec GmbH | 93.90 | |
| A | Cosphaderm® HAP | Hydroxyacetophenone | Cosphatec GmbH | 0.60 | |
| B | Glycerin | Glycerin | - | 5.00 | |
| B | Cosphaderm® Sodium Hyaluronate high | Sodium Hyaluronate | Cosphatec GmbH | 0.30 | |
| B | Cosphaderm® Sodium Hyaluronate low | Sodium Hyaluronate | Cosphatec GmbH | 0.20 |
Manufacturing Process
Phase A: Dissolve Phase A at 40°C.
Phase B: Combine all ingredients of phase B separately and add to phase A under stirring.
Adjust pH to 5.5 ± 0.05 if necessary.
Specification
Appearance: Transparent, low viscous serum
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
PORE REFINING. MOISTURISING. SMOOTHING.
Alternative preservation: Cosphaderm® Pentiol natural, Cosphaderm® Zinc Lactate natural
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 88.50 | |
| A | Cosphaderm® Pentiol natural | Pentylene Glycol | Cosphatec GmbH | 2.00 | |
| A | Panthenol | Panthenol Aqua | - | 0.50 | |
| B | Glycerin | Glycerin | - | 3.00 | |
| B | Cosphaderm® Sodium Hyaluronate high | Sodium Hyaluronate | Cosphatec GmbH | 0.30 | |
| B | Cosphaderm® Sodium Hyaluronate low | Sodium Hyaluronate | Cosphatec GmbH | 0.20 | |
| C | Cosphaderm® Zinc Lactate natural | Zinc Lactate | Cosphatec GmbH | 0.50 | |
| C | RonaCare® Niacinamide | Niacinamide | SUSONITY | 5.00 |
Manufacturing Process
Phase A: Combine all ingredients of phase A.
Phase B: Combine all ingredients of phase B separately and add to phase A under stirring.
Phase C: Add phase C to A/B and stir until everything is completely dissolved.
Adjust pH to 5.5 ± 0.05.
Specification
Appearance: Transparent, low viscous serum
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
HYDRATING. REFRESHING. SKIN REFINING.
Alternative preservation: Cosphaderm® Pentiol GL, Cosphaderm® Hexiol
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 84.00 | |
| A | Glycerin | Glycerin | - | 5.00 | |
| A | Cosphaderm® Pentiol GL | Pentylene Glycol | Cosphatec GmbH | 3.00 | |
| A | Cosphaderm® Hexiol | 1,2-Hexanediol | Cosphatec GmbH | 1.50 | |
| A | RonaCare® Nicotinamide | Niacinamide | SUSONITY | 4.00 | |
| A | Panthenol | Panthenol Aqua | - | 2.00 | |
| A | Cosphaderm® Sodium Hyaluronate low | Sodium Hyaluronate | Cosphatec GmbH | 0.10 | |
| B | Carbopol® Ultrez-21 | Acrylates/C10-30 Alkyl Acrylate Crosspolymer | Lubrizol | 0.40 |
Manufacturing Process
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Add phase B to phase A under stirring.
Adjust the pH to 6.0 ± 0.05 to thicken the formulation.
Specification
Appearance: Transparent, clear, viscous gel
pH: 6.0 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
ANTI-AGING. PORE-REFINING. HYDRATING.
Alternative preservation: Cosphaderm® Heptiol natural
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 87.65 | |
| A | Cosphaderm® Heptiol natural | 1,2-Heptanediol | Cosphatec GmbH | 1.00 | |
| A | Glycerin | Glycerin | - | 2.00 | |
| A | Inulin | Inulin | - | 1.00 | |
| A | Sodium PCA | Sodium PCA | - | 0.50 | |
| A | RonaCare® Nicotinamide | Niacinamide | SUSONITY | 5.00 | |
| B | Sodium Ascorbyl Phosphate | Sodium Ascorbyl Phosphate | - | 2.00 | |
| B | Sodium Gluconate | Sodium Gluconate | - | 0.15 | |
| C | Cosphaderm® Sodium Hyaluronate low | Sodium Hyaluronate | Cosphatec GmbH | 0.20 | |
| C | Cosphaderm® Sodium Hyaluronate high | Sodium Hyaluronate | Cosphatec GmbH | 0.30 | |
| C | Cosphaderm® X soft | Xanthan Gum | Cosphatec GmbH | 0.20 |
Manufacturing Process
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Add phase B to phase A.
Phase C: Add phase C and stir until everything is completely dissolved.
Adjust pH to 6.5 ± 0.05 if necessary.
Specification
Appearance: Transparent, low viscous serum
pH: 6.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
ANTI-AGEING. ANTIOXIDANT. MOISTURISING.
Alternative preservation: Cosphaderm® Dicapo natural, Cosphaderm® Magnolia Extract 98, Cosphaderm® Propanediol natural
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 77.30 | |
| A | Cosphaderm® Propanediol natural | Propanediol | Cosphatec GmbH | 3.00 | |
| A | Cosphaderm® X soft | Xanthan Gum | Cosphatec GmbH | 0.80 | |
| A | Cosphaderm® Sodium Hyaluronate high | Sodium Hyaluronate | Cosphatec GmbH | 0.10 | |
| A | Cosphaderm® Sodium Hyaluronate low | Sodium Hyaluronate | Cosphatec GmbH | 0.10 | |
| A | Sodium PCA | Sodium PCA | - | 0.50 | |
| A | Sodium Citrate | Sodium Citrate | - | 0.50 | |
| A | Cosphaderm® SF-75H | Hydrogenated Lecithin | Cosphatec GmbH | 1.50 | |
| B | Cosphaderm® GS Connect | Glyceryl Stearate Citrate | Cosphatec GmbH | 2.00 | |
| B | Shea Butter refined | Butyrospermum Parkii Butter | Gustav Heess GmbH | 2.00 | |
| B | Jojoba Oil | Simmondsia Chinensis Seed Oil | Gustav Heess GmbH | 4.00 | |
| B | MCT Oil Typ V Ph. Eur. | Caprylic/Capric Triglyceride | Gustav Heess GmbH | 5.00 | |
| B | Camellia Seed Oil | Camellia Oleifera Seed Oil | - | 2.00 | |
| C | Cosphaderm® Dicapo natural | Caprylyl Glycol Propanediol Glyceryl Caprylate | Cosphatec GmbH | 0.70 | |
| C | Cosphaderm® Magnolia Extract 98 | Magnolia Officinalis Bark Extract | Cosphatec GmbH | 0.20 | |
| D | Cosphaderm® Tocopharin | Tocopherol Helianthus Annuus Seed Oil Carnosic Acid | Cosphatec GmbH | 0.30 |
Manufacturing Process
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Combine all ingredients of phase B.
Heat both phases separately to 70-75 °C and add phase B to A while stirring. Then homogenise the formulation.
Phase C: Dissolve Cosphaderm® Magnolia Extract 98 in Cosphaderm® Dicapo natural.
Add phase C and phase D to phase A+B after cooling to 40 °C while stirring. Adjust the pH to 5.5 ± 0.05.
Specification
Appearance: Light beige, shiny, fluid emulsion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
ANTI-AGING. REGENERATING. SMOOTHING.
Alternative preservation: Cosphaderm® MultiMEG
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 83.10 | |
| A | Glycerin | Glycerin | - | 5.00 | |
| A | Cosphaderm® PA-12 | Sodium Phytate | Cosphatec GmbH | 0.10 | |
| A | Cosphaderm® X soft | Xanthan Gum | Cosphatec GmbH | 0.40 | |
| A | Cosphaderm® Sodium Hyaluronate high | Sodium Hyaluronate | Cosphatec GmbH | 0.20 | |
| A | Cosphaderm® Sodium Hyaluronate low | Sodium Hyaluronate | Cosphatec GmbH | 0.10 | |
| B | Olivem® 1000 | Cetearyl Olivate Sorbitan Olivate | Hallstar | 2.50 | |
| B | MCT Oil Typ V Ph. Eur. | Caprylic/Capric Triglyceride | Gustav Heess GmbH | 5.00 | |
| B | Grape Seed Oil | Vitis Vinifera Seed Oil | Gustav Heess GmbH | 2.00 | |
| B | Cosphaderm® T-70 NON GMO ECO | Tocopherol Helianthus Annuus Seed Oil | Cosphatec GmbH | 0.20 | |
| C | Cosphaderm® MultiMEG | Glyceryl Caprylate Pentylene Glycol Magnolia Officinalis Bark Extract | Cosphatec GmbH | 1.40 |
Manufacturing Process
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Heat to 75 °C.
Phase B: Combine all ingredients and heat to 75 °C. Add then phase B to phase A under strong stirring and homogenise.
Phase C: Add phase C to the formulation and stir.
Adjust the pH to 5.5 ± 0.05.
Specification
Appearance: White, fluid emulsion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
MOISTURISING. NURTURING. ANTI-AGEING.
Preservation: Cosphagard® Pol
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 72.70 | |
| A | Cosphaderm® Sodium Hyaluronate low | Sodium Hyaluronate | Cosphatec GmbH | 0.20 | |
| A | Cosphaderm® X 34 | Xanthan Gum | Cosphatec GmbH | 0.50 | |
| A | Cosphagard® Pol | Aqua Sodium Levulinate Potassium Sorbate | Cosphatec GmbH | 2.00 | |
| B | Cosphaderm® Propanediol natural | Propanediol | Cosphatec GmbH | 3.00 | |
| B | Sesame Oil | Sesamum Indicum Seed Oil | Gustav Heess GmbH | 4.00 | |
| B | Evening Primrose Oil | Oenothera Biennis Oil | Gustav Heess GmbH | 3.00 | |
| B | Jojoba Oil | Simmondsia Chinensis Seed Oil | Gustav Heess GmbH | 3.00 | |
| B | Shea Butter refined | Butyrospermum Parkii Butter | Gustav Heess GmbH | 3.00 | |
| B | Wheat Germ Oil | Triticum Vulgare Oil | Gustav Heess GmbH | 2.00 | |
| B | Almond Oil | Prunus Amygdalus Dulcis Oil | Gustav Heess GmbH | 2.00 | |
| B | Imwitor 960 K | Glyceryl Stearate SE | IOI Oleo GmbH | 3.00 | |
| B | Cosphaderm® T-70 NON GMO ECO | Tocopherol Helianthus Annuus Seed Oil | Cosphatec GmbH | 0.10 | |
| B | Lanette® O | Cetearyl Alcohol | BASF SE | 0.50 | |
| B | Cosphaderm® GS Connect | Glyceryl Stearate Citrate | Cosphatec GmbH | 1.00 |
Manufacturing Process
Phase A: Combine all ingredients of phase A under stirring until Cosphaderm® X 34 is completely dissolved.
Phase B: Combine all ingredients of phase B.
Heat both phases separately to 70 °C and add phase B to phase A under stirring.
After stirring homogenise the formulation and adjust the pH to 5.5 ± 0.05.
Specification
Appearance: White, shiny, low viscous emulsion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
ANTI-POLLUTION. HIGH SPREADABILITY. ANTI-AGEING.
Alternative preservation: Cosphaderm® Leo, Cosphaderm® Propanediol natural
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 64.30 | |
| A | Cosphaderm® Sodium Hyaluronate | Sodium Hyaluronate | Cosphatec GmbH | 0.10 | |
| A | Cosphaderm® Sodium Hyaluronate low | Sodium Hyaluronate | Cosphatec GmbH | 0.10 | |
| A | Cosphaderm® Propanediol natural | Propanediol | Cosphatec GmbH | 10.00 | |
| A | Cosphaderm® X soft | Xanthan Gum | Cosphatec GmbH | 0.50 | |
| A | Cosphaderm® Leo | Dipropylene Glycol Ethylhexylglycerin Caprylhydroxamic Acid | Cosphatec GmbH | 2.70 | |
| B | Cosphaderm® SF-75H | Hydrogenated Lecithin | Cosphatec GmbH | 3.00 | |
| B | Lanette® 16 | Cetyl Alcohol | BASF SE | 1.00 | |
| B | Cosphaderm® Feel | Triheptanoin | Cosphatec GmbH | 4.00 | |
| B | Babassu Oil | Orbignya Oleifera Seed Oil | Gustav Heess GmbH | 4.00 | |
| B | Apricot Kernel Oil | Prunus Armeniaca Kernel Oil | Gustav Heess GmbH | 4.00 | |
| B | Sesame Oil | Sesamum Indicum Seed Oil | Gustav Heess GmbH | 3.00 | |
| B | Evening Primrose Oil | Oenothera Biennis Oil | Gustav Heess GmbH | 1.00 | |
| B | Rosehip Seed Oil | Rosa Canina Fruit Oil | Gustav Heess GmbH | 1.00 | |
| B | Grape Seed Oil | Vitis Vinifera Seed Oil | Gustav Heess GmbH | 1.00 | |
| B | Cosphaderm® T-70 NON GMO | Tocopherol Helianthus Annuus Seed Oil | Cosphatec GmbH | 0.20 | |
| B | Cosphaderm® E-1000 NON GMO | Tocopherol Helianthus Annuus Seed Oil | Cosphatec GmbH | 0.10 |
Manufacturing Process
Phase A: Prepare phase A and stir until complete dissolution.
Phase B: Prepare phase B and heat to 50 °C until everything is melted. Let the mixture cool down to room temperature.
Add phase B to phase A and homogenise.
Adjust the pH to 5.5 ± 0.05.
Specification
Appearance: White, viscous emulsion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
QUICKLY ABSORBING. RICH SKIN FEEL. HYDRATING.
Alternative preservation: Cosphaderm® LA-T, Cosphaderm® Sodium pAS natural
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 82.20 | |
| A | Glycerin | Glycerin | - | 4.00 | |
| A | Cosphaderm® X soft | Xanthan Gum | Cosphatec GmbH | 1.00 | |
| A | Cosphaderm® Sodium Hyaluronate low | Sodium Hyaluronate | Cosphatec GmbH | 0.20 | |
| A | Cosphaderm® LA-T | Levulinic Acid Glycerin Sodium Levulinate Aqua | Cosphatec GmbH | 1.20 | |
| B | Cosphaderm® Sodium pAS natural | Sodium Anisate | Cosphatec GmbH | 0.40 | |
| C | Cosphaderm® SF-75H | Hydrogenated Lecithin | Cosphatec GmbH | 3.50 | |
| C | Sunflower Oil | Helianthus Annuus Seed Oil | Gustav Heess GmbH | 5.00 | |
| C | Jojoba Oil | Simmondsia Chinensis Seed Oil | Gustav Heess GmbH | 2.50 |
Manufacturing Process
Phase A: Prepare phase A and stir until everything is completely dissolved. Adjust pH value to 5.5.
Phase B: Add Cosphaderm® Sodium pAS natural to phase A under stirring.
Phase C: Prepare phase C and add it to phase A/B. Homogenise.
Adjust pH value to 5.5 ± 0.05.
Specification
Appearance: Beige, shiny, low viscous emulsion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
QUICKLY ABSORBING. RICH SKIN FEEL. HYDRATING.
Alternative preservation: Cosphaderm® LA-T, Cosphaderm® pAS natural
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 82.20 | |
| A | Cosphaderm® pAS natural | p-Anisic Acid | Cosphatec GmbH | 0.40 | |
| A | Cosphaderm® LA-T | Levulinic Acid Glycerin Sodium Levulinate Aqua | Cosphatec GmbH | 1.20 | |
| B | Glycerin | Glycerin | - | 4.00 | |
| B | Cosphaderm® X soft | Xanthan Gum | Cosphatec GmbH | 1.00 | |
| B | Cosphaderm® Sodium Hyaluronate low | Sodium Hyaluronate | Cosphatec GmbH | 0.20 | |
| C | Cosphaderm® SF-75H | Hydrogenated Lecithin | Cosphatec GmbH | 3.50 | |
| C | Sunflower Oil | Helianthus Annuus Seed Oil | Gustav Heess GmbH | 5.00 | |
| C | Jojoba Oil | Simmondsia Chinensis Seed Oil | Gustav Heess GmbH | 2.50 |
Manufacturing Process
Phase A: Prepare phase A. Raise the pH to 10 to dissolve Cosphaderm® pAS natural and stir until everything is completely dissolved. Afterwards, adjust the pH to 5.5 ± 0.05 by adding Citric Acid.
Phase B: Prepare phase B and add it to phase A while stirring. Stir until everything is completely dissolved.
Phase C: Prepare phase C and add it to phase A/B. Homogenise.
Adjust pH value to 5.5 ± 0.05.
Specification
Appearance: Beige, shiny, low viscous emulsion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
QUICKLY ABSORBING. RICH SKIN FEEL. HYDRATING.
Alternative preservation: Cosphaderm® LA-T, Cosphaderm® AS
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 82.20 | |
| A | Cosphaderm® AS | p-Anisic Acid | Cosphatec GmbH | 0.40 | |
| A | Cosphaderm® LA-T | Levulinic Acid Glycerin Sodium Levulinate Aqua | Cosphatec GmbH | 1.20 | |
| B | Glycerin | Glycerin | - | 4.00 | |
| B | Cosphaderm® X soft | Xanthan Gum | Cosphatec GmbH | 1.00 | |
| B | Cosphaderm® Sodium Hyaluronate low | Sodium Hyaluronate | Cosphatec GmbH | 0.20 | |
| C | Cosphaderm® SF-75H | Hydrogenated Lecithin | Cosphatec GmbH | 3.50 | |
| C | Sunflower Oil | Helianthus Annuus Seed Oil | Gustav Heess GmbH | 5.00 | |
| C | Jojoba Oil | Simmondsia Chinensis Seed Oil | Gustav Heess GmbH | 2.50 |
Manufacturing Process
Phase A: Prepare phase A. Raise the pH to 10 to dissolve Cosphaderm® AS natural and stir until everything is completely dissolved. Afterwards, adjust the pH to 5.5 ± 0.05 by adding Citric Acid.
Phase B: Prepare phase B and add it to phase A while stirring. Stir until everything is completely dissolved.
Phase C: Prepare phase C and add it to phase A/B. Homogenise.
Adjust pH value to 5.5 ± 0.05.
Specification
Appearance: Beige, shiny, low viscous emulsion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
SOOTHING. MOISTURISING. ANTI-BLEMISH.
Alternative preservation: Cosphaderm® Hexiol, Cosphaderm® Zinc Lactate natural, Cosphaderm® Magnolia Extract 98
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 74.65 | |
| A | Cosphaderm® Zinc Lactate natural | Zinc Lactate | Cosphatec GmbH | 0.50 | |
| A | Glycerin | Glycerin | - | 3.00 | |
| A | Cosphaderm® Hexiol natural | 1,2-Hexanediol | Cosphatec GmbH | 2.00 | |
| A | Cosphaderm® Sodium Hyaluronate high | Sodium Hyaluronate | Cosphatec GmbH | 0.10 | |
| A | Cosphaderm® Sodium Hyaluronate low | Sodium Hyaluronate | Cosphatec GmbH | 0.10 | |
| A | Cosphaderm® X 34 | Xanthan Gum | Cosphatec GmbH | 0.40 | |
| B | Olivem® 1000 | Cetearyl Olivate Sorbitan Olivate | Hallstar | 3.00 | |
| B | Lanette® 16 | Cetyl Alcohol | BASF SE | 2.00 | |
| B | Macadamia Oil | Macadamia Ternifolia Seed Oil | Gustav Heess GmbH | 4.00 | |
| B | MCT Oil Typ V Ph. Eur. | Caprylic/Capric Triglyceride | Gustav Heess GmbH | 4.00 | |
| B | Shea Butter refined | Butyrospermum Parkii Butter | Gustav Heess GmbH | 5.00 | |
| B | Evening Primrose Oil | Oenothera Biennis Oil | Gustav Heess GmbH | 1.00 | |
| B | Cosphaderm® T-70 NON GMO ECO | Tocopherol Helianthus Annuus Seed Oil | Cosphatec GmbH | 0.20 | |
| C | Cosphaderm® Magnolia Extract 98 | Magnolia Officinalis Bark Extract | Cosphatec GmbH | 0.05 |
Manufacturing Process
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Heat to 70-75 °C.
Phase B: Combine all ingredients of phase B and heat to 75°C. Phase C is added to the oil phase just before emulsion is formed.
Add phase B+C to the water phase while stirring. Homogenise at 40°C.
Adjust the pH to 5.5 ± 0.05.
Specification
Appearance: White, viscous cream
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
ANTI-AGEING. MOISTURISING. SOOTHING.
Alternative preservation: Cosphaderm® Hexiol natural, Cosphaderm® Sodium pAS natural
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 87.10 | |
| A | Cosphaderm® Propanediol natural | Propanediol | Cosphatec GmbH | 4.00 | |
| A | Cosphaderm® Hexiol natural | 1,2-Hexanediol | Cosphatec GmbH | 2.00 | |
| A | Panthenol | Panthenol Aqua | - | 0.50 | |
| A | Aloe Vera Powder | Aloe Barbadensis Leaf Juice Powder | Worlée-Chemie GmbH | 0.10 | |
| A | Ronacare® Allantoin | Allantoin | SUSONITY | 0.20 | |
| A | Cosphaderm® Sodium pAS natural | Sodium Anisate | Cosphatec GmbH | 0.30 | |
| B | Glycerin | Glycerin | - | 5.00 | |
| B | Cosphaderm® X 34 | Xanthan Gum | Cosphatec GmbH | 0.50 | |
| B | Cosphaderm® Sodium Hyaluronate high | Sodium Hyaluronate | Cosphatec GmbH | 0.20 | |
| B | Cosphaderm® Sodium Hyaluronate low | Sodium Hyaluronate | Cosphatec GmbH | 0.10 |
Manufacturing Process
Phase A: Combine all ingredients of phase A.
Phase B: Prepare phase B and slowly add to phase A under stirring. Continue stirring until everything is completely dissolved.
Adjust pH to 5.5 ± 0.05.
Specification
Appearance: Transparent, low viscous serum
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
HYDRATING. RELAXING. CALMING.
Alternative preservation: Cosphaderm® Hexiol, Cosphaderm® Pentiol GL, Cosphaderm® Propanediol natural
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 82.80 | |
| A | Cosphaderm® Hexiol | 1,2-Hexanediol | Cosphatec GmbH | 1.00 | |
| A | Cosphaderm® Pentiol GL | Pentylene Glycol | Cosphatec GmbH | 5.00 | |
| B | Glycerin | Glycerin | - | 5.00 | |
| B | Cosphaderm® Propanediol natural | Propanediol | Cosphatec GmbH | 5.00 | |
| B | Cosphaderm® X 34 | Xanthan Gum | Cosphatec GmbH | 0.50 | |
| B | Cosphaderm® KG | Amorphophallus Konjac Root Extract | Cosphatec GmbH | 0.50 | |
| B | Cosphaderm® Sodium Hyaluronate low | Sodium Hyaluronate | Cosphatec GmbH | 0.20 |
Manufacturing Process
Phase A: Prepare phase A.
Phase B: Pre-disperse phase B and add to the water phase while stirring. Stir until everything is completely dissolved.
Adjust the pH to 5.5 – 6.0 ± 0.05.
Heat the mixture to its boiling point and keep this temperature for 2 – 3 minutes.
Quickly pour the hot mixture into a casting mould and let it cool.
Specification
Appearance: Transparent or coloured, elastic jelly patch
pH: 5.5 – 6.0 ± 0.05
Stability: Stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
HYDRATING. REFRESHING. ANTI-AGEING.
Alternative preservation: Cosphaderm® Heptiol natural, Cosphaderm® Pentiol natural
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 87.60 | |
| A | Cosphaderm® Pentiol natural | Pentylene Glycol | Cosphatec GmbH | 4.00 | |
| A | Cosphaderm® Heptiol natural | 1,2-Heptanediol | Cosphatec GmbH | 1.00 | |
| B | Glycerin | Glycerin | - | 3.00 | |
| B | Cosphaderm® Sodium Hyaluronate high | Sodium Hyaluronate | Cosphatec GmbH | 0.20 | |
| B | Cosphaderm® Sodium Hyaluronate low | Sodium Hyaluronate | Cosphatec GmbH | 0.20 | |
| B | Cosphaderm® X 34 | Xanthan Gum | Cosphatec GmbH | 0.50 | |
| B | Cosphaderm® KG | Amorphophallus Konjac Root Extract | Cosphatec GmbH | 0.50 | |
| B | RonaCare® Nicotinamide | Niacinamide | SUSONITY | 3.00 |
Manufacturing Process
Phase A: Prepare phase A.
Phase B: Pre-disperse phase B and add to the water phase while stirring. Stir until everything is completely dissolved.
Adjust the pH to 5.5 – 6.0 ± 0.05.
Heat the mixture to 80-90°C and keep this temperature for 2 – 3 minutes.
Quickly pour the hot mixture into moulds and let it cool down.
Specification
Appearance: Transparent or coloured, elastic jelly patch
pH: 5.5 – 6.0 ± 0.05
Stability: Stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
REFRESHING. SKIN BOOSTING. TWO-PHASE SYSTEM.
Alternative preservation: Cosphaderm® Propanediol natural, Cosphaderm® Hexiol
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 76.05 | |
| A | Aloe Vera Powder | Aloe Barbadensis Leaf Juice Powder | - | 0.05 | |
| A | RonaCare® Nicotinamide | Niacinamide | SUSONITY | 3.50 | |
| A | Cosphaderm® Sodium Hyaluronate low | Sodium Hyaluronate | Cosphatec GmbH | 0.20 | |
| A | Panthenol | Panthenol Aqua | - | 1.00 | |
| A | Cosphaderm® Hexiol | 1,2-Hexanediol | Cosphatec GmbH | 1.50 | |
| A | Cosphaderm® Propanediol natural | Propanediol | Cosphatec GmbH | 5.00 | |
| A | Cosphaderm® PA ECONAT | Phytic Acid Aqua | Cosphatec GmbH | 0.10 | |
| B | Olive Oil | Olea Europaea Fruit Oil | Gustav Heess GmbH | 3.50 | |
| B | Argan Oil | Argania Spinosa Kernel Oil | Gustav Heess GmbH | 2.50 | |
| B | Avocado Oil | Persea Gratissima Oil | Gustav Heess GmbH | 2.00 | |
| B | Evening Primrose Oil | Oenothera Biennis Oil | Gustav Heess GmbH | 1.50 | |
| B | Rosehip Seed Oil | Rosa Canina Fruit Oil | Gustav Heess GmbH | 1.00 | |
| B | Jojoba Oil | Simmondsia Chinensis Seed Oil | Gustav Heess GmbH | 1.50 | |
| B | Macadamia Nut Oil | Macadamia Ternifolia Seed Oil | Gustav Heess GmbH | 0.50 | |
| B | Cosphaderm® T-70 NON GMO | Tocopherol Helianthus Annuus Seed Oil | Cosphatec GmbH | 0.10 |
Manufacturing Process
Phase A: Combine all ingredients of phase A and stir until complete dissolution.
Adjust the pH value to 5.5 ± 0.05.
Phase B: Prepare phase B in a separate beaker.
Add phase B to phase A without stirring and pour mixture into spray flask.
Specification
Appearance: Liquid two-phase system with oil phase on top of transparent water phase
pH: 5.5 ± 0.05
Stability: Stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
QUICKLY ABSORBING. RICH SKIN FEEL. HYDRATING.
Alternative preservation: Cosphaderm® LA-T, Cosphaderm® Sodium pAS natural
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 59.70 | |
| A | Glycerin | Glycerin | - | 4.00 | |
| A | Cosphaderm® X soft | Xanthan Gum | Cosphatec GmbH | 1.00 | |
| A | Cosphaderm® Sodium Hyaluronate low | Sodium Hyaluronate | Cosphatec GmbH | 0.20 | |
| A | Cosphaderm® LA-T | Levulinic Acid Glycerin Sodium Levulinate Aqua | Cosphatec GmbH | 1.20 | |
| B | Cosphaderm® Sodium pAS natural | Sodium Anisate | Cosphatec GmbH | 0.40 | |
| C | Demin. Water | Aqua | - | 22.50 | |
| C | Cosphaderm® SB-75H | Hydrogenated Lecithin | Cosphatec GmbH | 3.50 | |
| C | Sunflower Oil | Helianthus Annuus Seed Oil | Gustav Heess GmbH | 5.00 | |
| C | Jojoba Oil | Simmondsia Chinensis Seed Oil | Gustav Heess GmbH | 2.50 |
Manufacturing Process
Phase A: Prepare phase A and stir until everything is completely dissolved. Adjust pH value to 5.5.
Phase B: Add Cosphaderm® Sodium pAS natural to phase A under stirring.
Phase C: Prepare phase C and homogenise for 5 minutes with high performance disperser (stator/rotor) at max. speed.
Add phase C to phase A+B in small steps under stirring.
Adjust pH value to 5.5 ± 0.05.
Specification
Appearance: Shiny liquid emulsion
pH: 5.5 ± 0.05
Stability: no separation after centrifugation (4000 rpm, 30 min)
LONG-LASTING COLOUR. WEIGHTLESS FEEL.
MOISTURISING.
Alternative preservation: Cosphaderm® Hexiol natural,
Cosphaderm® Octiol natural
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 85.15 | |
| A | Cosphaderm® Hexiol natural | 1,2-Hexanediol | Cosphatec GmbH | 1.50 | |
| A | Cosphaderm® Octiol natural | Caprylyl Glycol | Cosphatec GmbH | 0.30 | |
| A | Sorbitol | Sorbitol | - | 2.00 | |
| B | Glycerin | Glycerin | - | 1.00 | |
| B | Cosphaderm® Propanediol natural palm free | Propanediol | Cosphatec GmbH | 3.00 | |
| B | Cosphaderm® Butiol natural | Butylene Glycol | Cosphatec GmbH | 5.00 | |
| B | Cosphaderm® X 34 | Xanthan Gum | Cosphatec GmbH | 0.40 | |
| B | Pullulan | Pullulan | - | 1.00 | |
| B | Cosphaderm® Sodium Hyaluronate high | Sodium Hyaluronate | Cosphatec GmbH | 0.10 | |
| B | Cosphaderm® Sodium Hyaluronate low | Sodium Hyaluronate | Cosphatec GmbH | 0.05 | |
| C | Unicert Red K7057_J | CI 17200 | SENSIENT BEAUTY | 0.10 | |
| C | FD&C Red 40 07700-C | CI 16035 | SENSIENT BEAUTY | 0.35 | |
| C | Unicert Red K7061-J | CI 45380 | SENSIENT BEAUTY | 0.05 |
Manufacturing Process
Phase A: Combine all ingredients of phase A.
Phase B: Prepare phase B and slowly add to phase A under stirring. Continue stirring until everything is
completely dissolved.
Phase C: Add phase C and stir until everything is homogeneous.
Adjust pH value to 5.50 ± 0.05.
Specification
Appearance: Clear, red, low viscous solution
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature
and 40 °C
Microbiological stability: proven
GENTLE. CLEANSING. REGENERATING.
Alternative preservation: Cosphaderm® Sodium LAAS, Cosphaderm® GMCY
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 68.40 | |
| A | Glycerin | Glycerin | - | 5.00 | |
| A | Sodium PCA | Sodium PCA | - | 0.50 | |
| A | Sodium Chloride | Sodium Chloride | - | 0.50 | |
| A | Cosphaderm® Sodium LAAS | Sodium Levulinate Sodium Anisate | Cosphatec GmbH | 1.00 | |
| A | Cosphaderm® Sodium Hyaluronate low | Sodium Hyaluronate | Cosphatec GmbH | 0.10 | |
| B | Jojoba Oil | Simmondsia Chinensis Seed Oil | Gustav Heess GmbH | 10.00 | |
| B | Almond Oil | Prunus Amygdalus Dulcis Oil | Gustav Heess GmbH | 7.00 | |
| B | Cetiol® CC | Dicaprylyl Carbonate | BASF SE | 4.00 | |
| B | Rosehip Seed Oil | Rosa Canina Fruit Oil | Gustav Heess GmbH | 3.00 | |
| B | Cosphaderm® GMCY | Glyceryl Caprylate | Cosphatec GmbH | 0.30 | |
| B | Cosphaderm® T-70 NON GMO ECO | Tocopherol Helianthus Annuus Seed Oil | Cosphatec GmbH | 0.20 |
Manufacturing Process
Phase A: Combine all ingredients of phase A and stir until complete dissolution.
Adjust the pH value to 5.5 ± 0.05.
Phase B: Prepare phase B in a separate beaker.
Add phase B to phase A without stirring.
Specification
Appearance: Two-phase system with yellowish oil phase on top of a clear water phase
pH: 5.5 ± 0.05
Stability: stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
Newsletter
Jetzt für unseren E-Mail-Newsletter anmelden und aktuelle Informationen zu unseren Produkten erhalten.
Bitte alle *Pflichtfelder ausfüllen
