FORMULIERUNGEN

Manufacturing Process
Phase A: Combine all ingredients of phase A.
Phase B: Prepare phase B and slowly add to phase A under stirring. Continue stirring until everything is completely dissolved.
Adjust pH to 5.5 ± 0.05.

Specification
Appearance: Transparent, clear liquid
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

Manufacturing Process
Phase A: Combine all ingredients of phase A.
Phase B: Prepare phase B and slowly add to phase A under stirring. Continue stirring until everything is completely dissolved.
Adjust pH to 5.5 ± 0.05.

Specification
Appearance: Transparent, low viscous serum
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

Manufacturing Process
Phase A: Combine all ingredients of phase A.
Phase B: Disperse Cosphaderm® KG in glycerol and add phase B to phase A. Stir until everything is dissolved.
Phase C: Add phase B to phase A/B.
Adjust the pH to 4.8 – 5.0.

Specification
Appearance: Turbid, high viscous gel
pH: 4.8 – 5.0
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

Manufacturing Process
Phase A: Disperse Cosphaderm® X 34 in glycerol and add demin. water. Stir until everything is dissolved.
Phase B: Add phase B to phase A.
Adjust the pH to 4.8 – 5.0.

Specification
Appearance: Transparent, high viscous gel
pH: 4.8 – 5.0
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

Manufacturing Process
Combine all ingredients of phase A and heat to 75-80°C until everything has melted.
Then add phase B to phase A and stir until everything is homogeneous. Add phase C and fill into molds.

Specification
Appearance: Slightly yellowish balm
Stability: stable for 3 months at room temperature and 40 °C
Microbiological stability: proven (Water activity value less than 0.75)

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Adjust the pH to 5.5 ± 0.05.
Phase B: Combine all ingredients and melt at 40-50 °C. Then add phase A to phase B while homogenising.

SPECIFICATION
Appearance: White viscous lotion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

Manufacturing Process
Phase A: Allow the Cosphaderm® Diols + Hydrolyzed Jojoba Esters to pre-dissolve. Then add to the water and add the thickeners while stirring. Mix until everything is homogeneous and heat to 85-90°C.
Phase B: Combine all ingredients of phase B separately and heat to 90°C.
Add phase B to phase A while stirring. Homogenise while cooling.
Phase C: Add phase C and mix/homogenise.
Adjust pH value to 6.80 ± 0.05.

Specification
Appearance: Black, high viscous emulsion
pH: 6.8 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven