Wir verstehen die Anforderungen und Fragestellungen von Kosmetik-Entwicklern. Darum verbringen wir viel Zeit mit Anwendungstechnik in unserem In-House Labor. Hier untersuchen wir die Einarbeitung und Wirkung von Rohstoffen, um unseren Kunden den bestmöglichen Support und passende Empfehlungen bieten zu können.
Ein ausgewähltes Set an Formulierungen haben wir hier zum Download bereitgestellt – viel Spaß damit!
QUICKLY ABSORBING. RICH SKIN FEEL. HYDRATING.
Alternative preservation: Cosphaderm® LA-T, Cosphaderm® AS
| PHASE | Ingredient | Cosmos | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Glycerin |
Glycerin
|
CREMER OLEO GmbH & Co. KG
|
4.00 | |
| A | Cosphaderm® X soft |
Xanthan Gum
|
Cosphatec GmbH
|
1.00 | |
| A | Cosphaderm® Sodium Hyaluronate low |
Sodium Hyaluronate
|
Cosphatec GmbH
|
0.20 | |
| A | Demin. Water |
Aqua
|
-
|
59.70 | |
| A | Cosphaderm® AS |
p-Anisic Acid
|
Cosphatec GmbH
|
0.40 | |
| A | Cosphaderm® LA-T |
Levulinic AcidGlycerinSodium LevulinateAqua
|
Cosphatec GmbH
|
1.20 | |
| B | Demin. Water |
Aqua
|
-
|
22.50 | |
| B | Cosphaderm® SF-75H |
Hydrogenated Lecithin
|
Cosphatec GmbH
|
3.50 | |
| B | Sunflower Oil |
Helianthus Annuus Seed Oil
|
Gustav Heess GmbH
|
5.00 | |
| B | Jojoba Oil |
Simmondsia Chinensis Seed Oil
|
Gustav Heess GmbH
|
2.50 |
Manufacturing Process
Phase A: Prepare phase A. Raise the pH to 10 to dissolve Cosphaderm® AS and stir until everything is completely dissolved.
Afterwards, adjust the pH to 5.5 ± 0.05 by adding Citric Acid.
Phase B: Prepare phase B and homogenise for 5 minutes with high performance disperser (stator/rotor) at max. speed.
Add phase B to phase A in small steps under stirring.
Adjust pH value to 5.5 ± 0.05.
Specification
Appearance: Shiny emulsion
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)
CLEANSING. FOAMING. NATURALLY ACTIVE AGAINST DANDRUFF.
Alternative preservation: Cosphaderm® LA-T, Cosphaderm® AS
| PHASE | Ingredient | Cosmos | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water |
Aqua
|
-
|
77.45 | |
| A | Sodium Coco-Sulfate |
Sodium Coco Sulfate
|
-
|
10.00 | |
| A | Plantacare® 1200 UP |
Lauryl Glucoside
|
BASF SE
|
4.00 | |
| A | Dehyton® K |
Cocamidopropyl Betaine
|
BASF SE
|
2.00 | |
| A | SOFTISAN® conditionHAIR |
PCA Glyceryl Oleate
|
IOI Oleo GmbH
|
1.00 | |
| A | Cosphagard® SA natural |
Salicylic Acid
|
Cosphatec GmbH
|
3.00 | |
| A | Cosphaderm® AS |
p-Anisic Acid
|
Cosphatec GmbH
|
0.20 | |
| B | Cosphaderm® X 34 |
Xanthan Gum
|
Cosphatec GmbH
|
0.50 | |
| C | Cosphaderm® PA ECONAT |
Phytic AcidAqua
|
Cosphatec GmbH
|
0.10 | |
| C | Cosphaderm® LA-T |
Levulinic AcidGlycerinSodium LevulinateAqua
|
Cosphatec GmbH
|
1.00 | |
| D | Sodium Chloride |
Sodium Chloride
|
-
|
0.75 |
MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A. Heat phase A to 40 °C.Raise the pH to 11 to dissolve Cosphagard® SA natural and Cosphaderm® AS.
Phase B: Add phase B to A and stir until Cosphaderm® X 34 is completely dissolved.
Phase C: Add phase C under stirring.
Phase D: Add phase D to thicken the formulation.
Adjust the pH to 4.5 ± 0.05.
SPECIFICATION
Appearance: translucent to yellowish liquid
pH: 4.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)