Wir verstehen die Anforderungen und Fragestellungen von Kosmetik-Entwicklern. Darum verbringen wir viel Zeit mit Anwendungstechnik in unserem In-House Labor. Hier untersuchen wir die Einarbeitung und Wirkung von Rohstoffen, um unseren Kunden den bestmöglichen Support und passende Empfehlungen bieten zu können.
Ein ausgewähltes Set an Formulierungen haben wir hier zum Download bereitgestellt – viel Spaß damit!
QUICKLY ABSORBING. RICH SKIN FEEL. HYDRATING.
Alternative preservation: Cosphaderm® LA-T, Cosphaderm® pAS natural
| PHASE | Ingredient | Cosmos | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Glycerin |
Glycerin
|
CREMER OLEO GmbH & Co. KG
|
4.00 | |
| A | Cosphaderm® X soft |
Xanthan Gum
|
Cosphatec GmbH
|
1.00 | |
| A | Cosphaderm® Sodium Hyaluronate low |
Sodium Hyaluronate
|
Cosphatec GmbH
|
0.20 | |
| A | Demin. Water |
Aqua
|
-
|
59.70 | |
| A | Cosphaderm® pAS natural |
p-Anisic Acid
|
Cosphatec GmbH
|
0.40 | |
| A | Cosphaderm® LA-T |
Levulinic AcidGlycerinSodium LevulinateAqua
|
Cosphatec GmbH
|
1.20 | |
| B | Demin. Water |
Aqua
|
-
|
22.50 | |
| B | Cosphaderm® SF-75H |
Hydrogenated Lecithin
|
Cosphatec GmbH
|
3.50 | |
| B | Sunflower Oil |
Helianthus Annuus Seed Oil
|
Gustav Heess GmbH
|
5.00 | |
| B | Jojoba Oil |
Simmondsia Chinensis Seed Oil
|
Gustav Heess GmbH
|
2.50 |
Manufacturing Process
Phase A: Prepare phase A. Raise the pH to 10 to dissolve Cosphaderm® pAS natural and stir until everything is completely dissolved.
Afterwards, adjust the pH to 5.5 ± 0.05 by adding Citric Acid.
Phase B: Prepare phase C and homogenise for 5 minutes with high performance disperser (stator/rotor) at max. speed.
Add phase B to phase A in small steps under stirring.
Adjust pH value to 5.5 ± 0.05.
Specification
Appearance: Shiny emulsion
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)
REGENERATING. PROTECTING. SOFT TEXTURE.
Alternative preservation: Cosphaderm® LA-T, Cosphaderm® pAS natural, Cosphaderm® Pentiol natural
| PHASE | Ingredient | Cosmos | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water |
Aqua
|
-
|
70.60 | |
| A | Cosphaderm® pAS natural |
p-Anisic Acid
|
Cosphatec GmbH
|
0.20 | |
| A | Cosphaderm® LA-T |
Levulinic AcidGlycerinSodium LevulinateAqua
|
Cosphatec GmbH
|
1.40 | |
| B | Cosphaderm® Pentiol natural |
Pentylene Glycol
|
Cosphatec GmbH
|
1.50 | |
| B | Glycerin |
Glycerin
|
CREMER OLEO GmbH & Co. KG
|
3.00 | |
| B | Magnesium Sulfate |
Magnesium Sulfate
|
-
|
0.70 | |
| C | Imwitor® 600 |
Polyglyceryl-3 Polyricinoleate
|
IOI Oleo GmbH
|
3.00 | |
| C | Candellila Wax |
Euphorbia Cerifera (Candelilla) Wax
|
-
|
0.60 | |
| C | Lanette® O |
Cetearyl Alcohol
|
BASF SE
|
1.00 | |
| C | MCT Oil Typ V Ph. Eur. |
Caprylic/Capric Triglyceride
|
Gustav Heess GmbH
|
7.00 | |
| C | Almond Oil |
Prunus Amygdalus Dulcis Oil
|
Gustav Heess GmbH
|
5.00 | |
| C | Jojoba Oil |
Simmondsia Chinensis Seed Oil
|
Gustav Heess GmbH
|
2.00 | |
| C | Miglyol® Coco 810 |
Coco-Caprylate / Caprate
|
IOI Oleo GmbH
|
3.50 | |
| D | Cosphaderm® Tapmix |
LecithinHelianthus Annuus Seed OilTocopherolAscorbyl Palmitate
|
Cosphatec GmbH
|
0.50 |
MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and raise the pH to 10 to dissolve Cosphaderm® pAS natural. Stir until everything is completely dissolved. Afterwards, adjust the pH to 5.5 ± 0.05 by adding Citric Acid.
Phase B: Add all ingredients of phase B to phase A.
Phase C: Combine all ingredients and heat to 80 °C. Then add phase A/B to phase C while homogenising.
Add phase D to the finished formulation and homogenise.
SPECIFICATION
Appearance: White, slightly beige cream
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)
CLEANSING. FOAMING. NATURALLY ACTIVE AGAINST DANDRUFF.
Alternative preservation: Cosphaderm® LA-T, Cosphaderm® pAS natural
| PHASE | Ingredient | Cosmos | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water |
Aqua
|
-
|
77.45 | |
| A | Sodium Coco-Sulfate |
Sodium Coco Sulfate
|
-
|
10.00 | |
| A | Plantacare® 1200 UP |
Lauryl Glucoside
|
BASF SE
|
4.00 | |
| A | Dehyton® K |
Cocamidopropyl Betaine
|
BASF SE
|
2.00 | |
| A | SOFTISAN® conditionHAIR |
PCA Glyceryl Oleate
|
IOI Oleo GmbH
|
1.00 | |
| A | Cosphagard® SA natural |
Salicylic Acid
|
Cosphatec GmbH
|
3.00 | |
| A | Cosphaderm® pAS natural |
p-Anisic Acid
|
Cosphatec GmbH
|
0.20 | |
| B | Cosphaderm® X 34 |
Xanthan Gum
|
Cosphatec GmbH
|
0.50 | |
| C | Cosphaderm® PA ECONAT |
Phytic AcidAqua
|
Cosphatec GmbH
|
0.10 | |
| C | Cosphaderm® LA-T |
Levulinic AcidGlycerinSodium LevulinateAqua
|
Cosphatec GmbH
|
1.00 | |
| D | Sodium Chloride |
Sodium Chloride
|
-
|
0.75 |
MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A. Heat phase A to 40 °C.Raise the pH to 11 to dissolve Cosphagard® SA natural and Cosphaderm® pAS natural.
Phase B: Add phase B to A and stir until Cosphaderm® X 34 is completely dissolved.
Phase C: Add phase C under stirring.
Phase D: Add phase D to thicken the formulation.
Adjust the pH to 4.5 ± 0.05.
SPECIFICATION
Appearance: translucent to yellowish liquid
pH: 4.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)
COOLING. HYDRATING. REFRESHING.
Alternative preservation: Cosphaderm® pAS natural, Cosphaderm® Capo, Cosphaderm® Propanediol natural
| PHASE | Ingredient | Cosmos | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water |
Aqua
|
-
|
78.50 | |
| A | Cosphaderm® pAS natural |
p-Anisic Acid
|
Cosphatec GmbH
|
0.20 | |
| B | Glycerin |
Glycerin
|
CREMER OLEO GmbH & Co. KG
|
3.00 | |
| B | Cosphaderm® Propanediol natural |
Propanediol
|
Cosphatec GmbH
|
2.00 | |
| B | Cosphaderm® X 34 |
Xanthan Gum
|
Cosphatec GmbH
|
0.40 | |
| C | PolyAquol®-2W |
Polyglyceryl-2 StearateGlyceryl StearateStearyl Alcohol
|
Innovacos
|
3.50 | |
| C | Lanette® O |
Cetearyl Alcohol
|
BASF SE
|
1.50 | |
| C | Babassu Oil |
Orbignya Oleifera Seed Oil
|
Gustav Heess GmbH
|
5.00 | |
| C | Cosphaderm® Feel |
Triheptanoin
|
Cosphatec GmbH
|
3.00 | |
| C | Shea Butter refined |
Butyrospermum Parkii Butter
|
Gustav Heess GmbH
|
1.00 | |
| C | Cosphaderm® T-70 NON GMO ECO |
TocopherolHelianthus Annuus Seed Oil
|
Cosphatec GmbH
|
0.20 | |
| D | Cosphaderm® Capo |
Caprylyl GlycolPropanediol
|
Cosphatec GmbH
|
1.00 | |
| D | Ethanol |
Alcohol
|
-
|
0.50 | |
| D | Menthol |
Menthol
|
-
|
0.20 |
MANUFACTURING PROCESS
Phase A: Prepare phase A. Raise the pH to 10 to dissolve Cosphaderm® pAS natural and stir until everything is completely dissolved. Afterwards, adjust the pH to 5.5 ± 0.05 by adding Citric Acid.
Phase B: Add all ingredients of phase B to phase A. Then heat phase A+B to 75 °C.
Phase C: Combine all ingredients and heat to 75 °C. Add then phase C to phase A+B under strong stirring and homogenise.
Phase D: Dissolve the menthol in Cosphaderm® Capo and ethanol and add below 40°C.
Adjust the pH to 5.5 ± 0.05.
SPECIFICATION
Appearance: White emulsion
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)