Wir verstehen die Anforderungen und Fragestellungen von Kosmetik-Entwicklern. Darum verbringen wir viel Zeit mit Anwendungstechnik in unserem In-House Labor. Hier untersuchen wir die Einarbeitung und Wirkung von Rohstoffen, um unseren Kunden den bestmöglichen Support und passende Empfehlungen bieten zu können.
Ein ausgewähltes Set an Formulierungen haben wir hier zum Download bereitgestellt – viel Spaß damit!
QUICKLY ABSORBING. RICH SKIN FEEL. HYDRATING.
Alternative preservation: Cosphaderm® LA-T, Cosphaderm® pAS natural
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 82.20 | |
| A | Cosphaderm® pAS natural | p-Anisic Acid | Cosphatec GmbH | 0.40 | |
| A | Cosphaderm® LA-T | Levulinic Acid Glycerin Sodium Levulinate Aqua | Cosphatec GmbH | 1.20 | |
| B | Glycerin | Glycerin | - | 4.00 | |
| B | Cosphaderm® X soft | Xanthan Gum | Cosphatec GmbH | 1.00 | |
| B | Cosphaderm® Sodium Hyaluronate low | Sodium Hyaluronate | Cosphatec GmbH | 0.20 | |
| C | Cosphaderm® SF-75H | Hydrogenated Lecithin | Cosphatec GmbH | 3.50 | |
| C | Sunflower Oil | Helianthus Annuus Seed Oil | Gustav Heess GmbH | 5.00 | |
| C | Jojoba Oil | Simmondsia Chinensis Seed Oil | Gustav Heess GmbH | 2.50 |
Manufacturing Process
Phase A: Prepare phase A. Raise the pH to 10 to dissolve Cosphaderm® pAS natural and stir until everything is completely dissolved. Afterwards, adjust the pH to 5.5 ± 0.05 by adding Citric Acid.
Phase B: Prepare phase B and add it to phase A while stirring. Stir until everything is completely dissolved.
Phase C: Prepare phase C and add it to phase A/B. Homogenise.
Adjust pH value to 5.5 ± 0.05.
Specification
Appearance: Beige, shiny, low viscous emulsion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
REGENERATING. PROTECTING. SOFT TEXTURE.
Alternative preservation: Cosphaderm® LA-T, Cosphaderm® pAS natural, Cosphaderm® Pentiol natural
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 70.60 | |
| A | Cosphaderm® pAS natural | p-Anisic Acid | Cosphatec GmbH | 0.20 | |
| A | Cosphaderm® LA-T | Levulinic Acid Glycerin Sodium Levulinate Aqua | Cosphatec GmbH | 1.40 | |
| B | Cosphaderm® Pentiol natural | Pentylene Glycol | Cosphatec GmbH | 1.50 | |
| B | Glycerin | Glycerin | - | 3.00 | |
| B | Magnesium Sulfate | Magnesium Sulfate | - | 0.70 | |
| C | Imwitor® 600 | Polyglyceryl-3 Polyricinoleate | IOI Oleo GmbH | 3.00 | |
| C | Candellila Wax | Euphorbia Cerifera (Candelilla) Wax | - | 0.60 | |
| C | Lanette® O | Cetearyl Alcohol | BASF SE | 1.00 | |
| C | MCT Oil Typ V Ph. Eur. | Caprylic/Capric Triglyceride | Gustav Heess GmbH | 7.00 | |
| C | Almond Oil | Prunus Amygdalus Dulcis Oil | Gustav Heess GmbH | 5.00 | |
| C | Jojoba Oil | Simmondsia Chinensis Seed Oil | Gustav Heess GmbH | 2.00 | |
| C | Miglyol® Coco 810 | Coco-Caprylate / Caprate | IOI Oleo GmbH | 3.50 | |
| D | Cosphaderm® Tapmix | Lecithin Helianthus Annuus Seed Oil Tocopherol Ascorbyl Palmitate | Cosphatec GmbH | 0.50 |
Manufacturing Process
Phase A: Combine all ingredients of phase A and raise the pH to 10 to dissolve Cosphaderm® pAS natural. Stir until everything is completely dissolved. Afterwards, adjust the pH to 6.0 ±0.2 by adding Citric Acid.
Phase B: Add all ingredients of phase B to phase A and adjust the pH to 5.5 ± 0.05.
Phase C: Combine all ingredients and heat to 80 °C. Then add phase A/B to phase C while homogenising.
Add phase D to the finished formulation and homogenise.
Specification
Appearance: White, slightly beige, high viscous cream
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
CLEANSING. FOAMING. NATURALLY ACTIVE AGAINST DANDRUFF.
Alternative preservation: Cosphaderm® LA-T, Cosphaderm® pAS natural
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 77.45 | |
| A | Sodium Coco-Sulfate | Sodium Coco Sulfate | - | 10.00 | |
| A | Plantacare® 1200 UP | Lauryl Glucoside | BASF SE | 4.00 | |
| A | Dehyton® K | Cocamidopropyl Betaine | BASF SE | 2.00 | |
| A | SOFTISAN® conditionHAIR | PCA Glyceryl Oleate | IOI Oleo GmbH | 1.00 | |
| A | Cosphagard® SA natural | Salicylic Acid | Cosphatec GmbH | 3.00 | |
| A | Cosphaderm® pAS natural | p-Anisic Acid | Cosphatec GmbH | 0.20 | |
| B | Cosphaderm® X 34 | Xanthan Gum | Cosphatec GmbH | 0.50 | |
| C | Cosphaderm® PA ECONAT | Phytic Acid Aqua | Cosphatec GmbH | 0.10 | |
| C | Cosphaderm® LA-T | Levulinic Acid Glycerin Sodium Levulinate Aqua | Cosphatec GmbH | 1.00 | |
| D | Sodium Chloride | Sodium Chloride | - | 0.75 |
Manufacturing Process
Phase A: Combine all ingredients of phase A. Heat phase A to 40 °C.Raise the pH to 11 to dissolve Cosphagard® SA natural and Cosphaderm® pAS natural.
Phase B: Add phase B to A and stir until Cosphaderm® X 34 is completely dissolved.
Phase C: Add phase C under stirring.
Phase D: Add phase D to thicken the formulation.
Adjust the pH to 4.5 ± 0.05.
Specification
Appearance: translucent, yellowish gel
pH: 4.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
COOLING. HYDRATING. REFRESHING.
Alternative preservation: Cosphaderm® pAS natural, Cosphaderm® Octiol natural, Cosphaderm® Propanediol natural
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 78.50 | |
| A | Cosphaderm® pAS natural | p-Anisic Acid | Cosphatec GmbH | 0.20 | |
| B | Glycerin | Glycerin | - | 3.00 | |
| B | Cosphaderm® Propanediol natural | Propanediol | Cosphatec GmbH | 2.50 | |
| B | Cosphaderm® Octiol natural | Caprylyl Glycol | Cosphatec GmbH | 0.50 | |
| B | Cosphaderm® X 34 | Xanthan Gum | Cosphatec GmbH | 0.40 | |
| C | PolyAquol®-2W | Polyglyceryl-2 Stearate Glyceryl Stearate Stearyl Alcohol | Innovacos | 3.50 | |
| C | Lanette® O | Cetearyl Alcohol | BASF SE | 1.50 | |
| C | Babassu Oil | Orbignya Oleifera Seed Oil | Gustav Heess GmbH | 5.00 | |
| C | Cosphaderm® Feel | Triheptanoin | Cosphatec GmbH | 3.00 | |
| C | Shea Butter refined | Butyrospermum Parkii Butter | Gustav Heess GmbH | 1.00 | |
| C | Cosphaderm® T-70 NON GMO ECO | Tocopherol Helianthus Annuus Seed Oil | Cosphatec GmbH | 0.20 | |
| D | Ethanol | Alcohol | Cosphatec GmbH | 0.50 | |
| D | Menthol | Menthol | - | 0.20 |
Manufacturing Process
Phase A: Prepare phase A. Raise the pH to 10 to dissolve Cosphaderm® pAS natural and stir until everything is completely dissolved. Afterwards, adjust the pH to 5.5 ± 0.05 by adding Citric Acid.
Phase B: Add all ingredients of phase B to phase A. Then heat phase A+B to 75 °C.
Phase C: Combine all ingredients and heat to 75 °C. Add then phase C to phase A+B under strong stirring and homogenise.
Phase D: Dissolve menthol in ethanol and add phase D below 40°C.
Adjust the pH to 5.5 ± 0.05.
Specification
Appearance: White viscous emulsion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
Newsletter
Jetzt für unseren E-Mail-Newsletter anmelden und aktuelle Informationen zu unseren Produkten erhalten.
Bitte alle *Pflichtfelder ausfüllen
