We understand the requirements and issues of cosmetics formulators. That's why we spend a lot of time on application technology in our in-house laboratory. Here we analyse the incorporation and effect of raw materials in order to offer our customers the best possible support and suitable recommendations.
We have provided a selected set of formulations for download here - enjoy!
QUICKLY ABSORBING. RICH SKIN FEEL. HYDRATING.
Alternative preservation: Cosphaderm® LA-T, Cosphaderm® pAS natural
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 82.20 | |
| A | Cosphaderm® pAS natural | p-Anisic Acid | Cosphatec GmbH | 0.40 | |
| A | Cosphaderm® LA-T | Levulinic Acid Glycerin Sodium Levulinate Aqua | Cosphatec GmbH | 1.20 | |
| B | Glycerin | Glycerin | - | 4.00 | |
| B | Cosphaderm® X soft | Xanthan Gum | Cosphatec GmbH | 1.00 | |
| B | Cosphaderm® Sodium Hyaluronate low | Sodium Hyaluronate | Cosphatec GmbH | 0.20 | |
| C | Cosphaderm® SF-75H | Hydrogenated Lecithin | Cosphatec GmbH | 3.50 | |
| C | Sunflower Oil | Helianthus Annuus Seed Oil | Gustav Heess GmbH | 5.00 | |
| C | Jojoba Oil | Simmondsia Chinensis Seed Oil | Gustav Heess GmbH | 2.50 |
Manufacturing Process
Phase A: Prepare phase A. Raise the pH to 10 to dissolve Cosphaderm® pAS natural and stir until everything is completely dissolved. Afterwards, adjust the pH to 5.5 ± 0.05 by adding Citric Acid.
Phase B: Prepare phase B and add it to phase A while stirring. Stir until everything is completely dissolved.
Phase C: Prepare phase C and add it to phase A/B. Homogenise.
Adjust pH value to 5.5 ± 0.05.
Specification
Appearance: Beige, shiny, low viscous emulsion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
REGENERATING. PROTECTING. SOFT TEXTURE.
Alternative preservation: Cosphaderm® LA-T, Cosphaderm® pAS natural, Cosphaderm® Pentiol natural
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 70.60 | |
| A | Cosphaderm® pAS natural | p-Anisic Acid | Cosphatec GmbH | 0.20 | |
| A | Cosphaderm® LA-T | Levulinic Acid Glycerin Sodium Levulinate Aqua | Cosphatec GmbH | 1.40 | |
| B | Cosphaderm® Pentiol natural | Pentylene Glycol | Cosphatec GmbH | 1.50 | |
| B | Glycerin | Glycerin | - | 3.00 | |
| B | Magnesium Sulfate | Magnesium Sulfate | - | 0.70 | |
| C | Imwitor® 600 | Polyglyceryl-3 Polyricinoleate | IOI Oleo GmbH | 3.00 | |
| C | Candellila Wax | Euphorbia Cerifera (Candelilla) Wax | - | 0.60 | |
| C | Lanette® O | Cetearyl Alcohol | BASF SE | 1.00 | |
| C | MCT Oil Typ V Ph. Eur. | Caprylic/Capric Triglyceride | Gustav Heess GmbH | 7.00 | |
| C | Almond Oil | Prunus Amygdalus Dulcis Oil | Gustav Heess GmbH | 5.00 | |
| C | Jojoba Oil | Simmondsia Chinensis Seed Oil | Gustav Heess GmbH | 2.00 | |
| C | Miglyol® Coco 810 | Coco-Caprylate / Caprate | IOI Oleo GmbH | 3.50 | |
| D | Cosphaderm® Tapmix | Lecithin Helianthus Annuus Seed Oil Tocopherol Ascorbyl Palmitate | Cosphatec GmbH | 0.50 |
Manufacturing Process
Phase A: Combine all ingredients of phase A and raise the pH to 10 to dissolve Cosphaderm® pAS natural. Stir until everything is completely dissolved. Afterwards, adjust the pH to 6.0 ±0.2 by adding Citric Acid.
Phase B: Add all ingredients of phase B to phase A and adjust the pH to 5.5 ± 0.05.
Phase C: Combine all ingredients and heat to 80 °C. Then add phase A/B to phase C while homogenising.
Add phase D to the finished formulation and homogenise.
Specification
Appearance: White, slightly beige, high viscous cream
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
CLEANSING. FOAMING. NATURALLY ACTIVE AGAINST DANDRUFF.
Alternative preservation: Cosphaderm® LA-T, Cosphaderm® pAS natural
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 77.45 | |
| A | Sodium Coco-Sulfate | Sodium Coco Sulfate | - | 10.00 | |
| A | Plantacare® 1200 UP | Lauryl Glucoside | BASF SE | 4.00 | |
| A | Dehyton® K | Cocamidopropyl Betaine | BASF SE | 2.00 | |
| A | SOFTISAN® conditionHAIR | PCA Glyceryl Oleate | IOI Oleo GmbH | 1.00 | |
| A | Cosphagard® SA natural | Salicylic Acid | Cosphatec GmbH | 3.00 | |
| A | Cosphaderm® pAS natural | p-Anisic Acid | Cosphatec GmbH | 0.20 | |
| B | Cosphaderm® X 34 | Xanthan Gum | Cosphatec GmbH | 0.50 | |
| C | Cosphaderm® PA ECONAT | Phytic Acid Aqua | Cosphatec GmbH | 0.10 | |
| C | Cosphaderm® LA-T | Levulinic Acid Glycerin Sodium Levulinate Aqua | Cosphatec GmbH | 1.00 | |
| D | Sodium Chloride | Sodium Chloride | - | 0.75 |
Manufacturing Process
Phase A: Combine all ingredients of phase A. Heat phase A to 40 °C.Raise the pH to 11 to dissolve Cosphagard® SA natural and Cosphaderm® pAS natural.
Phase B: Add phase B to A and stir until Cosphaderm® X 34 is completely dissolved.
Phase C: Add phase C under stirring.
Phase D: Add phase D to thicken the formulation.
Adjust the pH to 4.5 ± 0.05.
Specification
Appearance: translucent, yellowish gel
pH: 4.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
COOLING. HYDRATING. REFRESHING.
Alternative preservation: Cosphaderm® pAS natural, Cosphaderm® Octiol natural, Cosphaderm® Propanediol natural
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 78.50 | |
| A | Cosphaderm® pAS natural | p-Anisic Acid | Cosphatec GmbH | 0.20 | |
| B | Glycerin | Glycerin | - | 3.00 | |
| B | Cosphaderm® Propanediol natural | Propanediol | Cosphatec GmbH | 2.50 | |
| B | Cosphaderm® Octiol natural | Caprylyl Glycol | Cosphatec GmbH | 0.50 | |
| B | Cosphaderm® X 34 | Xanthan Gum | Cosphatec GmbH | 0.40 | |
| C | PolyAquol®-2W | Polyglyceryl-2 Stearate Glyceryl Stearate Stearyl Alcohol | Innovacos | 3.50 | |
| C | Lanette® O | Cetearyl Alcohol | BASF SE | 1.50 | |
| C | Babassu Oil | Orbignya Oleifera Seed Oil | Gustav Heess GmbH | 5.00 | |
| C | Cosphaderm® Feel | Triheptanoin | Cosphatec GmbH | 3.00 | |
| C | Shea Butter refined | Butyrospermum Parkii Butter | Gustav Heess GmbH | 1.00 | |
| C | Cosphaderm® T-70 NON GMO ECO | Tocopherol Helianthus Annuus Seed Oil | Cosphatec GmbH | 0.20 | |
| D | Ethanol | Alcohol | Cosphatec GmbH | 0.50 | |
| D | Menthol | Menthol | - | 0.20 |
Manufacturing Process
Phase A: Prepare phase A. Raise the pH to 10 to dissolve Cosphaderm® pAS natural and stir until everything is completely dissolved. Afterwards, adjust the pH to 5.5 ± 0.05 by adding Citric Acid.
Phase B: Add all ingredients of phase B to phase A. Then heat phase A+B to 75 °C.
Phase C: Combine all ingredients and heat to 75 °C. Add then phase C to phase A+B under strong stirring and homogenise.
Phase D: Dissolve menthol in ethanol and add phase D below 40°C.
Adjust the pH to 5.5 ± 0.05.
Specification
Appearance: White viscous emulsion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
Newsletter
Register now for our e-mail newsletter and receive the latest information on our products.
Product-relevant information needs to be added here.
