FORMULIERUNGEN

Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Heat to 70-75 °C.
Phase B: Combine all ingredients and heat to 75 °C. Add then phase B to phase A under strong stirring and homogenise.
Phase C: Add phase C below 40 °C.
Adjust the pH to 5.5 ± 0.05.

Appearance: White viscous fluid
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Add Cosphaderm® SF-75H to phase A and let it soak for 10-20 minutes. Then heat phase A+B to 70 °C.
Phase C: Combine all ingredients of phase C and heat to 70 °C. Add then phase C to phase A+B under
strong stirring and homogenise the formulation.
Adjust the pH to 5.0 ± 0.05.

Appearance: Light beige gel cream
pH: 5.0 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Combine all ingredients of phase B.
Heat both phases separately to 70-75 °C and add phase B to A while homogenising.
Phase C: Dissolve Cosphaderm® Magnolia Extract 98 in Cosphaderm® Diols. Add phase C to phase A/B under stirring.
Adjust the pH to 4.0 ± 0.05.

Appearance: Beige, viscous gel cream
pH: 4.0 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

Phase A: Prepare phase A and stir until dispersed.
Phase B: Slowly add the water to phase A under stirring and stir until complete dissolution.
If wanted, add heat-proof colour.
Phase C: Prepare phase C, adjust the pH to 5.5 ± 0.05 and set aside.
Heat phase A+B to its boiling point and keep this temperature for 2 – 3 min.
Add phase C to the hot phase A+B. Continue stirring until everything is combined.
Quickly pour the warm mixture into moulds and let it cool down.

Appearance: Clear, solid, elastic jelly
pH: 5.5 – 6.5
Stability: stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Add phase B to the water phase while stirring. Then heat the water phase to 70-75 °C.
Phase C: Combine all ingredients of phase C and heat to 75°C.
Add phase C to the water phase while stirring. Add phase D to the emulsion and homogenise.
Adjust the pH to 5.5 ± 0.05.

Appearance: white, slightly beige viscous lotion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Combine all ingredients of phase B.
Heat both phases separately to 75 °C and add phase B to A while stirring very fast. Homogenise.
Adjust the pH to 5.0 ± 0.05.

Appearance: White viscous lotion
pH: 5.0 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

Combine all ingredients of phase A and melt until everything is homogeneous.

Appearance: Cloudy, thickened oil
Stability: Stable for 3 months at room temperature and 40 °C
Microbiological stability: proven (Water activity value less than 0.75)

Phase A: Prepare phase A. Raise the pH to 10 to dissolve Cosphaderm® pAS natural and stir until everything is completely dissolved. Afterwards, adjust the pH to 5.5 ± 0.05 by adding Citric Acid.
Phase B: Add all ingredients of phase B to phase A. Then heat phase A+B to 75 °C.
Phase C: Combine all ingredients and heat to 75 °C. Add then phase C to phase A+B under strong stirring and homogenise.
Phase D: Dissolve menthol in ethanol and add phase D below 40°C.
Adjust the pH to 5.5 ± 0.05.

Appearance: White viscous emulsion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

Phase A: Combine all ingredients of phase A.
Phase B: Prepare phase B and slowly add to phase A under stirring. Continue stirring until everything is
completely dissolved.
Phase C: Add phase C and stir until everything is homogeneous.
Adjust pH value to 5.50 ± 0.05.

Appearance: Clear, red, low viscous solution
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature
and 40 °C
Microbiological stability: proven

Phase A: Mix all ingredients together and heat to 80-85 °C until everything is melted.
Phase B: Add all ingredients of phase B to phase A at 70°C.
Phase C: Premix the pigments in the oils until everything is homogeneous and add it to the hot phase A+B and fill into packaging.

Appearance: Solid stick
Stability: stable for 3 months at room temperature and 40 °C
Microbiological stability: proven (Water activity value less than 0.75)

Phase A: Allow the Cosphaderm® Diols + Hydrolyzed Jojoba Esters to pre-dissolve. Then add to the water and add the thickeners while stirring. Mix until everything is homogeneous and heat to 85-90°C.
Phase B: Combine all ingredients of phase B separately and heat to 90°C.
Add phase B to phase A while stirring. Homogenise while cooling.
Phase C: Add phase C and mix/homogenise.
Adjust pH value to 6.80 ± 0.05.

Appearance: Black, high viscous emulsion
pH: 6.8 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven