FORMULIERUNGEN

MODERNE KOSMETIK FÜR ANSPRUCHSVOLLE ENTWICKLER

Wir verstehen die Anforderungen und Fragestellungen von Kosmetik-Entwicklern. Darum verbringen wir viel Zeit mit Anwendungstechnik in unserem In-House Labor. Hier untersuchen wir die Einarbeitung und Wirkung von Rohstoffen, um unseren Kunden den bestmöglichen Support und passende Empfehlungen bieten zu können.

Ein ausgewähltes Set an Formulierungen haben wir hier zum Download bereitgestellt – viel Spaß damit!

FaceCare

SLOW AGEING DAY CREAM ALL NATURAL INGREDIENTS

100.135.1.1

HYDRATING. ANTIOXIDANT. REGENERATING.

Alternative preservation: Cosphaderm® LAAS, Cosphaderm® GMCY

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	72.80
A	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	3.00
A	Cosphaderm® X soft	Xanthan Gum	Cosphatec GmbH	0.30
A	Cosphaderm® Sodium Hyaluronate low	Sodium Hyaluronate	Cosphatec GmbH	0.20
A	Cosphaderm® PA-12	Sodium Phytate	Cosphatec GmbH	0.10
B	Cosphaderm® SB-75H NON GMO	Hydrogenated Lecithin	Cosphatec GmbH	0.50
C	Cosphaderm® GS Connect	Glyceryl Stearate Citrate	Cosphatec GmbH	2.00
C	Lanette® O	Cetearyl Alcohol	BASF SE	3.00
C	Shea Butter refined	Butyrospermum Parkii Butter	Cosphatec GmbH	3.00
C	Cosphaderm® GMCY	Glyceryl Caprylate	Cosphatec GmbH	0.30
C	MCT Oil Typ V Ph. Eur.	Caprylic/Capric Triglyceride	Gustav Heess GmbH	5.00
C	Cetiol® OE	Dicaprylyl Ether	BASF SE	4.00
C	Grape Seed Oil	Vitis Vinifera Seed Oil	Gustav Heess GmbH	2.00
D	Cosphaderm® Tocopharin	Carnosic AcidTocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.30
D	Cosphaderm® LAAS	GlycerinAquaSodium LevulinateSodium Anisate	Cosphatec GmbH	3.50

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Adjust pH to 5 – 6 and add phase B. Heat to 75°C.
Phase C: Combine all ingredients of phase C and heat to 75°C.
Add phase C to phase A/B while stirring.
Phase D: Add phase D under 40 °C and homogenise.
Adjust the pH to 5.5 ± 0.05.

SPECIFICATION
Appearance: White high viscous cream
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

ANTI-POLLUTION SERUM ALL NATURAL INGREDIENTS

100.92.1.1

ANTI-AGEING. ANTIOXIDANT. MOISTURISING.

Alternative preservation: Cosphaderm® Dicapo natural, Cosphaderm® Magnolia Extract 98, Cosphaderm® Propanediol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	77.30
A	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	3.00
A	Cosphaderm® X soft	Xanthan Gum	Cosphatec GmbH	0.80
A	Cosphaderm® Sodium Hyaluronate high	Sodium Hyaluronate	Cosphatec GmbH	0.10
A	Cosphaderm® Sodium Hyaluronate low	Sodium Hyaluronate	Cosphatec GmbH	0.10
A	Sodium PCA	Sodium PCA	-	0.50
A	Sodium Citrate	Sodium Citrate	-	0.50
A	Cosphaderm® SF-75H	Hydrogenated Lecithin	Cosphatec GmbH	1.50
B	Cosphaderm® GS Connect	Glyceryl Stearate Citrate	Cosphatec GmbH	2.00
B	Shea Butter refined	Butyrospermum Parkii Butter	Gustav Heess GmbH	2.00
B	Jojoba Oil	Simmondsia Chinensis Seed Oil	Gustav Heess GmbH	4.00
B	MCT Oil Typ V Ph. Eur.	Caprylic/Capric Triglyceride	Gustav Heess GmbH	5.00
B	Camellia Seed Oil	Camellia Oleifera Seed Oil	-	2.00
C	Cosphaderm® Dicapo natural	Caprylyl GlycolPropanediolGlyceryl Caprylate	Cosphatec GmbH	0.70
C	Cosphaderm® Magnolia Extract 98	Magnolia Officinalis Bark Extract	Cosphatec GmbH	0.20
D	Cosphaderm® Tocopharin	TocopherolHelianthus Annuus Seed OilCarnosic Acid	Cosphatec GmbH	0.30

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Combine all ingredients of phase B.
Heat both phases separately to 70-75 °C and add phase B to A while stirring. Then homogenise the formulation.
Phase C: Dissolve Cosphaderm® Magnolia Extract 98 in Cosphaderm® Dicapo natural.
Add phase C and phase D to phase A+B after cooling to 40 °C while stirring. Adjust the pH to 5.5 ± 0.05.

SPECIFICATION
Appearance: Light beige, shiny, fluid emulsion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

ANTI-WRINKLE EYE CREAM ALL NATURAL INGREDIENTS

100.49.1.1

MOISTURISING. NURTURING. ANTI-AGEING.

Preservation: Cosphagard® Pol

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	72.70
A	Cosphaderm® Sodium Hyaluronate low	Sodium Hyaluronate	Cosphatec GmbH	0.20
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.50
A	Cosphagard® Pol	AquaSodium LevulinatePotassium Sorbate	Cosphatec GmbH	2.00
B	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	3.00
B	Sesame Oil	Sesamum Indicum Seed Oil	Gustav Heess GmbH	4.00
B	Evening Primrose Oil	Oenothera Biennis Oil	Gustav Heess GmbH	3.00
B	Jojoba Oil	Simmondsia Chinensis Seed Oil	Gustav Heess GmbH	3.00
B	Shea Butter refined	Butyrospermum Parkii Butter	Gustav Heess GmbH	3.00
B	Wheat Germ Oil	Triticum Vulgare Oil	Gustav Heess GmbH	2.00
B	Almond Oil	Prunus Amygdalus Dulcis Oil	Gustav Heess GmbH	2.00
B	Imwitor 960 K	Glyceryl Stearate SE	IOI Oleo GmbH	3.00
B	Cosphaderm® T-70 NON GMO ECO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.10
B	Lanette® O	Cetearyl Alcohol	BASF SE	0.50
B	Cosphaderm® GS Connect	Glyceryl Stearate Citrate	Cosphatec GmbH	1.00

Manufacturing Process
Phase A: Combine all ingredients of phase A under stirring until Cosphaderm® X 34 is completely dissolved.
Phase B: Combine all ingredients of phase B.
Heat both phases separately to 70 °C and add phase B to phase A under stirring.
After stirring homogenise the formulation and adjust the pH to 5.5 ± 0.05.

Specification
Appearance: White, shiny, low viscous emulsion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

DAILY FACIAL CREAM ALL NATURAL INGREDIENTS

100.59.1.1

MOISTURISING. CARING. HYDRATING.

Preservation: Cosphagard® Pol

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	74.50
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	3.00
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.50
A	Cosphagard® Pol	AquaSodium LevulinatePotassium Sorbate	Cosphatec GmbH	1.50
B	Cosphaderm® Feel	Triheptanoin	Cosphatec GmbH	5.00
B	Cosphaderm® GS Connect	Glyceryl Stearate Citrate	Cosphatec GmbH	2.50
B	Witarix® 60/40	Caprylic/Capric Triglyceride	IOI Oleo GmbH	5.00
B	Softisan® 154	Hydrogenated Palm Oil	IOI Oleo GmbH	1.00
B	Shea Butter refined	Butyrospermum Parkii Butter	Gustav Heess GmbH	5.00
B	Ecorol® 16/98 P	Cetyl Alcohol	Ecogreen Oleochemicals	2.00

Manufacturing Process
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Combine all ingredients of phase B.
Heat both phases separately to 70 °C and add phase B to A while stirring very fast. Homogenise.
Adjust the pH to 5.5 ± 0.05.

Specification
Appearance: White, high viscous cream
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

HAPPY BARRIER CREAM ALL NATURAL INGREDIENTS

100.90.1.1

HYDRATING. NOURISHING. SKIN BARRIER ENHANCING.

Alternative preservation: Cosphaderm® Absolute, Cosphaderm® GMCY, Cosphaderm® Magnolia Extract 98

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	53.70
A	Cosphaderm® X soft	Xanthan Gum	Cosphatec GmbH	0.60
B	Cosphaderm® Absolute	PropanediolSodium LactateBetaineAqua	Cosphatec GmbH	20.00
C	Cosphaderm® SF-75H	Hydrogenated Lecithin	Cosphatec GmbH	1.00
D	Cosphaderm® GS Connect	Glyceryl Stearate Citrate	Cosphatec GmbH	2.00
D	Lanette® O	Cetearyl Alcohol	BASF SE	2.00
D	Behenyl Alcohol	Behenyl Alcohol	-	2.50
D	Shea Butter refined	Butyrospermum Parkii Butter	Gustav Heess GmbH	5.00
D	Cosphaderm® GMCY	Glyceryl Caprylate	Cosphatec GmbH	0.30
D	Jojoba Oil	Simmondsia Chinensis Seed Oil	Gustav Heess GmbH	3.50
D	MCT Oil Typ V Ph. Eur.	Caprylic/Capric Triglyceride	Gustav Heess GmbH	5.00
D	Squalane	Squalane	-	4.00
D	Cosphaderm® T-70 NON GMO ECO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.20
E	Cosphaderm® Magnolia Extract 98	Magnolia Officinalis Bark Extract	Cosphatec GmbH	0.20

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Add phase B to A while stirring.
Phase C: Add phase C to the water phase while stirring. Then heat the water phase to 70-75 °C.
Phase D: Combine all ingredients of phase D and heat to 75°C. Phase E is added to the oil phase just before emulsion is formed.
Add phase D+E to the water phase while stirring. Homogenise at 40°C.
Adjust the pH to 5.5 ± 0.05.

SPECIFICATION
Appearance: Light beige, high viscous cream
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

INTENSE MOISTURISING CREAM ALL NATURAL INGREDIENTS

100.109.2.1

ANTI-AGING. HYDRATING. SMOOTHING.

Alternative preservation: Cosphaderm® Dicapo natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	69.60
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	4.00
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.50
A	Cosphaderm® Sodium Hyaluronate	Sodium Hyaluronate	Cosphatec GmbH	0.20
B	Cosphaderm® GS Connect	Glyceryl Stearate Citrate	Cosphatec GmbH	2.50
B	Lanette® O	Cetearyl Alcohol	BASF SE	3.00
B	Cutina® GMS V	Glyceryl Stearate	BASF SE	2.00
B	Shea Butter	Butyrospermum Parkii Butter	Gustav Heess GmbH	5.00
B	MCT Oil Typ V Ph. Eur.	Caprylic/Capric Triglyceride	Gustav Heess GmbH	7.00
B	Grape Seed Oil	Vitis Vinifera Seed Oil	Gustav Heess GmbH	3.00
B	Cetiol® OE	Dicaprylyl Ether	BASF SE	2.00
B	Cosphaderm® T-70 NON GMO ECO CC	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.20
C	Cosphaderm® Dicapo natural	Caprylyl GlycolPropanediolGlyceryl Caprylate	Cosphatec GmbH	1.00

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Heat to 75 °C.
Phase B: Combine all ingredients and heat to 75 °C. Add then phase B to phase A under strong stirring and homogenise.
Phase C: Add phase C to the formulation and stir.
Adjust the pH to 5.5 ± 0.05.

SPECIFICATION
Appearance: White, high viscous emulsion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

MINIMALIST FACE MOISTURISER ALL NATURAL INGREDIENTS

100.99.2.1

CLEAN BEAUTY. MINIMALIST FORMULATION. HYDRATING.

Alternative preservation: Cosphaderm® Zinc Lactate natural, Cosphaderm® GMUD, Cosphaderm® Magnolia Extract 98

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	71.50
A	Cosphaderm® Zinc Lactate natural	Zinc Lactate	Cosphatec GmbH	0.50
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.50
B	Cosphaderm® GS Connect	Glyceryl Stearate Citrate	Cosphatec GmbH	3.50
B	Lanette® 16	Cetyl Alcohol	BASF SE	3.00
B	Cosphaderm® GMUD	Glyceryl Undecylenate	Cosphatec GmbH	0.60
B	Shea Butter refined	Butyrospermum Parkii Butter	Gustav Heess GmbH	8.00
B	Sunflower Oil	Helianthus Annuus Seed Oil	Gustav Heess GmbH	12.00
B	Cosphaderm® T-70 NON GMO ECO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.20
C	Cosphaderm® Magnolia Extract 98	Magnolia Officinalis Bark Extract	Cosphatec GmbH	0.20

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Heat the water phase to 70-75 °C.
Phase B: Combine all ingredients of phase B and heat to 75°C. Phase C is added to the oil phase just before emulsion is formed.
Add phase B+C to the water phase while stirring. Homogenise at 40°C.
Adjust the pH to 5.5 ± 0.05.

SPECIFICATION
Appearance: White, high viscous cream
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

MOISTURE MAGNET CREAM ALL NATURAL INGREDIENTS

100.114.1.1

HYDRATING. RADIANT. SKIN PROTECTING.

Alternative preservation: Cosphaderm® Sodium LAAS, Cosphaderm® GMCY, Cosphaderm® Magnolia Extract 98

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	70.95
A	Cosphaderm® Sodium LAAS	Sodium LevulinateSodium Anisate	Cosphatec GmbH	1.00
A	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	4.00
A	Cosphaderm® X soft	Xanthan Gum	Cosphatec GmbH	0.60
B	Cosphaderm® SF-75H	Hydrogenated Lecithin	Cosphatec GmbH	0.75
C	Cosphaderm® GS Connect	Glyceryl Stearate Citrate	Cosphatec GmbH	2.00
C	Lanette® O	Cetearyl Alcohol	BASF SE	1.50
C	Behenyl Alcohol	Behenyl Alcohol	-	1.00
C	Shea Butter refined	Butyrospermum Parkii Butter	Gustav Heess GmbH	5.00
C	Cosphaderm® GMCY	Glyceryl Caprylate	Cosphatec GmbH	0.30
C	Jojoba Oil	Simmondsia Chinensis Seed Oil	Gustav Heess GmbH	3.50
C	MCT Oil Typ V Ph. Eur.	Caprylic/Capric Triglyceride	Gustav Heess GmbH	5.00
C	Squalane	Squalane	-	4.00
D	Cosphaderm® Magnolia Extract 98	Magnolia Officinalis Bark Extract	Cosphatec GmbH	0.10
E	Cosphaderm® Tocopharin	Carnosic AcidTocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.30

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Add phase B to A while stirring. Then heat the water phase to 70-75 °C.
Phase C: Combine all ingredients of phase C and heat to 75°C. Phase D is added to the oil phase just before emulsion is formed.
Add phase C+D to the water phase while stirring. Homogenise at 40°C.
Add phase E to the emulsion.
Adjust the pH to 5.5 ± 0.05.

SPECIFICATION
Appearance: Light beige, white cream
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

HairCare

LEAVE-IN HAIR CREAM ALL NATURAL INGREDIENTS

400.91.1.1

CONDITIONING. HYDRATING. ANTI-FRIZZ.

Alternative preservation: Cosphaderm® Absolute, Cosphaderm® Octiol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	52.00
A	Inulin	Inulin	-	1.00
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.25
A	Sclerotium Gum	Sclerotium Gum	-	0.25
B	Cosphaderm® Absolute	PropanediolSodium LactateBetaineAqua	Cosphatec GmbH	20.00
C	Cosphaderm® GS Connect	Glyceryl Stearate Citrate	Cosphatec GmbH	2.50
C	Lanette® O	Cetearyl Alcohol	BASF SE	4.00
C	Stearic Acid	Stearic Acid	-	2.00
C	Shea Butter refined	Butyrospermum Parkii Butter	Gustav Heess GmbH	7.00
C	Cosphaderm® Octiol natural	Caprylyl Glycol	Cosphatec GmbH	0.30
C	Argan Oil	Argania Spinosa Kernel Oil	Gustav Heess GmbH	3.00
C	Cosphaderm® Feel	Triheptanoin	Cosphatec GmbH	3.00
C	MCT Oil Typ V Ph. Eur.	Caprylic/Capric Triglyceride	Gustav Heess GmbH	4.00
C	SOFTISAN® conditionHAIR	PCA Glyceryl Oleate	IOI Oleo GmbH	0.50
C	Cosphaderm® T-70 NON GMO ECO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.20

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Add phase B to A while stirring. Then heat phase A+B to 75 °C.
Phase C: Combine all ingredients of phase C and heat to 75 °C. Then add phase C to phase A+B under
strong stirring and homogenise the formulation.
Adjust the pH to 4.5 ± 0.05.

SPECIFICATION
Appearance: White, high viscous cream
pH: 4.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

Bodycare

AFTER SUN LOTION ALL NATURAL INGREDIENTS

200.78.2.1

SOOTHING. HYDRATING. REGENERATING.

Alternative preservation: Cosphaderm® Sodium pAS natural, Cosphaderm® Zinc Lactate, Cosphaderm® Pentiol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	71.90
A	Cosphaderm® Pentiol natural	Pentylene Glycol	Cosphatec GmbH	4.00
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	3.00
A	Cosphaderm® Sodium pAS natural	Sodium Anisate	Cosphatec GmbH	0.30
A	Cosphaderm® Zinc Lactate natural	Zinc Lactate	Cosphatec GmbH	0.50
A	Aloe Vera Powder	Aloe Barbadensis Leaf Juice Powder	-	0.10
A	RonaCare® Ectoin	Ectoin	Merck KGaA	1.00
B	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.50
C	Cosphaderm® GS Connect	Glyceryl Stearate Citrate	Cosphatec GmbH	2.50
C	Lanette® O	Cetearyl Alcohol	BASF SE	1.50
C	MCT Oil Typ V Ph. Eur.	Caprylic/Capric Triglyceride	Gustav Heess GmbH	4.00
C	Cosphaderm® Feel	Triheptanoin	Cosphatec GmbH	2.00
C	Almond Oil	Prunus Amygdalus Dulcis Oil	Gustav Heess GmbH	3.00
C	Sunflower Oil	Helianthus Annuus Seed Oil	Gustav Heess GmbH	3.00
C	Shea Butter refined	Butyrospermum Parkii Butter	Gustav Heess GmbH	2.50
C	Cosphaderm® T-70 NON GMO ECO CC	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.20

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Add Cosphaderm® X 34 while stirring and stir until everything is homogeneous.
Phase C: Combine all ingredients of phase C.
Heat both phases separately to 75 °C and add phase C to A/B while stirring. Homogenise.
Adjust the pH to 5.5 ± 0.05.

SPECIFICATION
Appearance: White, viscous lotion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

IN-SHOWER BODY LOTION ALL NATURAL INGREDIENTS

200.51.2.1

LIGHT SKIN FEEL. HIGH SPREADABILITY. MOISTURISING.

Preservation: Cosphagard® Pol, Cosphaderm® Pentiol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	74.40
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	2.00
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.60
A	Cosphagard® Pol	AquaSodium LevulinatePotassium Sorbate	Cosphatec GmbH	2.00
A	Cosphaderm® Pentiol natural	Pentylene Glycol	Cosphatec GmbH	2.00
B	Sunflower Oil	Helianthus Annuus Seed Oil	Gustav Heess GmbH	4.00
B	Shea Butter refined	Butyrospermum Parkii Butter	Gustav Heess GmbH	4.00
B	MCT Oil Typ V Ph. Eur.	Caprylic/Capric Triglyceride	Gustav Heess GmbH	3.00
B	SOFTISAN® conditionHAIR	PCA Glyceryl Oleate	IOI Oleo GmbH	1.00
B	Macadamia Nut Oil	Macadamia Ternifolia Seed Oil	Gustav Heess GmbH	2.00
B	Softisan® 100	Hydrogenated Coco Glycerides	IOI Oleo GmbH	2.00
B	Ecorol® 16/98 P	Cetyl Alcohol	Ecogreen Oleochemicals	1.00
B	Cosphaderm® GS Connect	Glyceryl Stearate Citrate	Cosphatec GmbH	2.00

Manufacturing Process
Phase A: Combine all ingredients of phase A under stirring and stir until Cosphaderm® X 34 is completely dissolved.
Phase B: Combine all ingredients of phase B.
Heat both phases separately to 70 °C and add phase B to phase A under stirring.
Homogenise the formulation and adjust the pH to 5.5 ± 0.05.

Specification
Appearance: White, shiny lotion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

ORGANIC BODY BUTTER ALL NATURAL INGREDIENTS

200.112.1.1

RICH TEXTURE. NATURAL. SOFT.

Alternative preservation: Cosphaderm® Sodium LAAS, Cosphaderm® GMCY

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	62.50
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	4.00
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.40
A	Cosphaderm® Sodium LAAS	Sodium LevulinateSodium Anisate	Cosphatec GmbH	1.00
A	Cosphaderm® PA-12	Sodium Phytate	Cosphatec GmbH	0.10
B	Cosphaderm® GS Connect	Glyceryl Stearate Citrate	Cosphatec GmbH	3.50
B	Cutina® GMS V	Glyceryl Stearate	BASF SE	3.00
B	Lanette® O	Cetearyl Alcohol	BASF SE	4.00
B	Beeswax white	Cera alba	Gustav Heess GmbH	1.00
B	Shea Butter refined	Butyrospermum Parkii Butter	Gustav Heess GmbH	5.00
B	Babassu Oil	Orbignya Oleifera Seed Oil	Gustav Heess GmbH	5.00
B	Sunflower Oil	Helianthus Annuus Seed Oil	Gustav Heess GmbH	3.00
B	Cosphaderm® Feel	Triheptanoin	Cosphatec GmbH	2.00
B	MCT Oil Typ V Ph. Eur.	Caprylic/Capric Triglyceride	Gustav Heess GmbH	5.00
B	Cosphaderm® GMCY	Glyceryl Caprylate	Cosphatec GmbH	0.30
B	Cosphaderm® T-70 NON GMO ECO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.20

SPECIFICATION
Appearance: White high viscous emulsion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

SOOTHING BODY LOTION ALL NATURAL INGREDIENTS

200.126.1.1

VELVET. REGENERATING. FAST-ABSORBING.

Alternative preservation: Cosphaderm® Sodium LAAS, Cosphaderm® Octiol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	77.70
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	2.00
A	Cosphaderm® Sodium LAAS	Sodium LevulinateSodium Anisate	Cosphatec GmbH	1.00
A	Cosphaderm® Octiol natural	Caprylyl Glycol	Cosphatec GmbH	0.30
A	Cosphaderm® X soft	Xanthan Gum	Cosphatec GmbH	0.50
B	Cosphaderm® SF-75H	Hydrogenated Lecithin	Cosphatec GmbH	0.50
C	Cosphaderm® GS Connect	Glyceryl Stearate Citrate	Cosphatec GmbH	2.50
C	Lanette® 16	Cetyl Alcohol	BASF SE	1.20
C	Shea Butter refined	Butyrospermum Parkii Butter	Gustav Heess GmbH	3.00
C	Jojoba Oil	Simmondsia Chinensis Seed Oil	Gustav Heess GmbH	3.00
C	Cetiol® CC	Dicaprylyl Carbonate	BASF SE	2.00
C	MCT Oil Typ V Ph. Eur.	Caprylic/Capric Triglyceride	Gustav Heess GmbH	4.00
C	Squalane	Squalane	-	2.00
D	Cosphaderm® Tocopharin	Carnosic AcidTocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.30

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Add phase B to the water phase while stirring. Then heat the water phase to 70-75 °C.
Phase C: Combine all ingredients of phase C and heat to 75°C.
Add phase C to the water phase while stirring. Add phase D to the emulsion and homogenise.
Adjust the pH to 5.5 ± 0.05.

SPECIFICATION
Appearance: white, slightly beige viscous lotion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

Sun & Color Care

NATURAL MASCARA ALL NATURAL INGREDIENTS

700.129.1.1

VEGAN. LENGTH. SEPARATION OF THE LASHES.

Alternative preservation: Cosphaderm® Octiol natural, Cosphaderm® Hexiol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	55.10
A	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	5.00
A	Hydrolyzed Jojoba Esters	Hydrolyzed Jojoba EstersJojoba EstersAqua	-	2.00
A	Gummi Arabicum	Acacia Senegal Gum	-	0.50
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.50
A	Cosphaderm® PA-12	Sodium Phytate	Cosphatec GmbH	0.10
A	Sorbitol	Sorbitol	-	1.00
A	Cosphaderm® Octiol natural	Caprylyl Glycol	Cosphatec GmbH	0.30
A	Cosphaderm® Hexiol natural	1,2-Hexanediol	Cosphatec GmbH	1.50
B	Cosphaderm® GS Connect	Glyceryl Stearate Citrate	Cosphatec GmbH	2.00
B	Cutina® GMS V	Glyceryl Stearate	BASF SE	2.00
B	Lanette® O	Cetearyl Alcohol	BASF SE	4.00
B	Kahlwax 6607L	Helianthus Annuus Seed Cera	Kahl GmbH & Co. KG	7.00
B	Carnauba Wax	Copernicia Cerifera Cera	Gustav Heess GmbH	3.00
B	Shea Butter refined	Butyrospermum Parkii Butter	Gustav Heess GmbH	1.00
B	Cosphaderm® Feel	Triheptanoin	Cosphatec GmbH	5.00
C	Unipure Black LC 989	CI 77499	SENSIENT BEAUTY	10.00

Manufacturing Process
Phase A: Allow the Cosphaderm® Diols + Hydrolyzed Jojoba Esters to pre-dissolve. Then add to the water and add the thickeners while stirring. Mix until everything is homogeneous and heat to 85-90°C.
Phase B: Combine all ingredients of phase B separately and heat to 90°C.
Add phase B to phase A while stirring. Homogenise while cooling.
Phase C: Add phase C and mix/homogenise.
Adjust pH value to 6.80 ± 0.05.

Specification
Appearance: Black, high viscous emulsion
pH: 6.8 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven