We understand the requirements and issues of cosmetics formulators. That's why we spend a lot of time on application technology in our in-house laboratory. Here we analyse the incorporation and effect of raw materials in order to offer our customers the best possible support and suitable recommendations.
We have provided a selected set of formulations for download here - enjoy!
ANTI INFLAMMATORY. CLARIFYING. PORE SIZE REDUCING.
Alternative preservation: Cosphaderm® Zinc Lactate natural, Cosphaderm® Propanediol natural
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 88.20 | |
| A | Cosphaderm® Propanediol natural | Propanediol | Cosphatec GmbH | 5.00 | |
| A | Cosphagard® SA natural | Salicylic Acid | Cosphatec GmbH | 2.00 | |
| B | Glycerin | Glycerin | - | 2.50 | |
| B | Cosphaderm® X soft | Xanthan Gum | Cosphatec GmbH | 0.70 | |
| B | Cosphaderm® Sodium Hyaluronate high | Sodium Hyaluronate | Cosphatec GmbH | 0.10 | |
| C | Cosphaderm® Zinc Lactate natural | Zinc Lactate | Cosphatec GmbH | 1.00 | |
| C | Hamamelis Virginiana Leaf Water | Hamamelis Virginiana Leaf Water | - | 0.50 |
Manufacturing Process
Phase A: Combine all ingredients of phase A. Raise the pH to 11 to dissolve Cosphagard® SA natural. When everything is dissolved, lower the pH back to 4-5 again.
Phase B: Combine Glycerin, Cosphaderm® X 34 and Cosphaderm® Sodium Hyaluronate high and stir until the powder is wetted. Then add it to phase A.
Phase C: Add phase C under stirring.
Adjust the pH to 4.0 ± 0.05.
Specification
Appearance: Transparent, semi-viscous gel
pH: 4.0 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
EXFOLIATING. PORE SIZE REDUCING. SOOTHING.
Alternative preservation: Cosphaderm® Pentiol natural, Cosphaderm® Propanediol natural
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 90.90 | |
| A | Cosphaderm® Propanediol natural | Propanediol | Cosphatec GmbH | 4.00 | |
| A | Cosphaderm® Pentiol natural | Pentylene Glycol | Cosphatec GmbH | 3.00 | |
| A | Cosphagard® SA natural | Salicylic Acid | Cosphatec GmbH | 2.00 | |
| B | Cosphaderm® PA ECONAT | Phytic Acid Aqua | Cosphatec GmbH | 0.10 |
Manufacturing Process
Phase A: Combine all ingredients of phase A. Raise the pH to 11 to dissolve Cosphagard® SA natural completely.
Phase B: Add phase B and lower the pH to 4.0 ± 0.05.
Specification
Appearance: Clear, liquid solution
pH: 4.0 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
EXFOLIATING. HYDRATING. SOOTHING.
Alternative preservation: Cosphaderm® Pentiol natural, Cosphaderm® Zinc Lactate natural
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 85.70 | |
| A | Cosphagard® SA natural | Salicylic Acid | Cosphatec GmbH | 2.00 | |
| B | Glycerin | Glycerin | - | 3.00 | |
| B | Panthenol | Panthenol Aqua | - | 0.50 | |
| B | Cosphaderm® Sodium Hyaluronate | Sodium Hyaluronate | Cosphatec GmbH | 0.20 | |
| B | Cosphaderm® X 34 | Xanthan Gum | Cosphatec GmbH | 0.20 | |
| B | Caffeine Powder | Caffeine | - | 1.00 | |
| B | Betaine | Betaine | - | 2.00 | |
| B | Cosphaderm® Pentiol natural | Pentylene Glycol | Cosphatec GmbH | 5.00 | |
| B | Cosphaderm® Zinc Lactate natural | Zinc Lactate | Cosphatec GmbH | 0.40 |
Manufacturing Process
Phase A: Combine the ingredients of phase A. Raise the pH to 11 to dissolve Cosphagard® SA natural. When everything is dissolved, lower the pH back to 4-5 again.
Phase B: Add all ingredients from phase B one after another.
Adjust the pH to 4.0 ± 0.05.
Specification
Appearance: Transparent, low viscous solution
pH: 4.0 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
CLEANSING. FOAMING. NATURALLY ACTIVE AGAINST DANDRUFF.
Alternative preservation: Cosphaderm® LA-T, Cosphaderm® Sodium pAS natural
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 77.45 | |
| A | Sodium Coco-Sulfate | Sodium Coco Sulfate | - | 10.00 | |
| A | Plantacare® 1200 UP | Lauryl Glucoside | BASF SE | 4.00 | |
| A | Dehyton® K | Cocamidopropyl Betaine | BASF SE | 2.00 | |
| A | SOFTISAN® conditionHAIR | PCA Glyceryl Oleate | IOI Oleo GmbH | 1.00 | |
| A | Cosphagard® SA natural | Salicylic Acid | Cosphatec GmbH | 3.00 | |
| B | Cosphaderm® X 34 | Xanthan Gum | Cosphatec GmbH | 0.50 | |
| C | Cosphaderm® PA ECONAT | Phytic Acid Aqua | Cosphatec GmbH | 0.10 | |
| C | Cosphaderm® Sodium pAS natural | Sodium Anisate | Cosphatec GmbH | 0.20 | |
| C | Cosphaderm® LA-T | Levulinic Acid Glycerin Sodium Levulinate Aqua | Cosphatec GmbH | 1.00 | |
| D | Sodium Chloride | Sodium Chloride | - | 0.75 |
Manufacturing Process
Phase A: Combine all ingredients of phase A. Heat phase A to 40 °C.Raise the pH to 11 to dissolve Cosphagard® SA natural.
Phase B: Add phase B to A and stir until Cosphaderm® X 34 is completely dissolved.
Phase C: Add phase C under stirring.
Phase D: Add phase D to thicken the formulation.
Adjust the pH to 4.5 ± 0.05.
Specification
Appearance: translucent, yellowish gel
pH: 4.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
CLEANSING. FOAMING. NATURALLY ACTIVE AGAINST DANDRUFF.
Alternative preservation: Cosphaderm® LA-T, Cosphaderm® pAS natural
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 77.45 | |
| A | Sodium Coco-Sulfate | Sodium Coco Sulfate | - | 10.00 | |
| A | Plantacare® 1200 UP | Lauryl Glucoside | BASF SE | 4.00 | |
| A | Dehyton® K | Cocamidopropyl Betaine | BASF SE | 2.00 | |
| A | SOFTISAN® conditionHAIR | PCA Glyceryl Oleate | IOI Oleo GmbH | 1.00 | |
| A | Cosphagard® SA natural | Salicylic Acid | Cosphatec GmbH | 3.00 | |
| A | Cosphaderm® pAS natural | p-Anisic Acid | Cosphatec GmbH | 0.20 | |
| B | Cosphaderm® X 34 | Xanthan Gum | Cosphatec GmbH | 0.50 | |
| C | Cosphaderm® PA ECONAT | Phytic Acid Aqua | Cosphatec GmbH | 0.10 | |
| C | Cosphaderm® LA-T | Levulinic Acid Glycerin Sodium Levulinate Aqua | Cosphatec GmbH | 1.00 | |
| D | Sodium Chloride | Sodium Chloride | - | 0.75 |
Manufacturing Process
Phase A: Combine all ingredients of phase A. Heat phase A to 40 °C.Raise the pH to 11 to dissolve Cosphagard® SA natural and Cosphaderm® pAS natural.
Phase B: Add phase B to A and stir until Cosphaderm® X 34 is completely dissolved.
Phase C: Add phase C under stirring.
Phase D: Add phase D to thicken the formulation.
Adjust the pH to 4.5 ± 0.05.
Specification
Appearance: translucent, yellowish gel
pH: 4.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
CLEANSING. FOAMING. NATURALLY ACTIVE AGAINST DANDRUFF.
Alternative preservation: Cosphaderm® LA-T, Cosphaderm® AS
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 77.45 | |
| A | Sodium Coco-Sulfate | Sodium Coco Sulfate | - | 10.00 | |
| A | Plantacare® 1200 UP | Lauryl Glucoside | BASF SE | 4.00 | |
| A | Dehyton® K | Cocamidopropyl Betaine | BASF SE | 2.00 | |
| A | SOFTISAN® conditionHAIR | PCA Glyceryl Oleate | IOI Oleo GmbH | 1.00 | |
| A | Cosphagard® SA natural | Salicylic Acid | Cosphatec GmbH | 3.00 | |
| A | Cosphaderm® AS | p-Anisic Acid | Cosphatec GmbH | 0.20 | |
| B | Cosphaderm® X 34 | Xanthan Gum | Cosphatec GmbH | 0.50 | |
| C | Cosphaderm® PA ECONAT | Phytic Acid Aqua | Cosphatec GmbH | 0.10 | |
| C | Cosphaderm® LA-T | Levulinic Acid Glycerin Sodium Levulinate Aqua | Cosphatec GmbH | 1.00 | |
| D | Sodium Chloride | Sodium Chloride | - | 0.75 |
Manufacturing Process
Phase A: Combine all ingredients of phase A. Heat phase A to 40 °C.Raise the pH to 11 to dissolve Cosphagard® SA natural and Cosphaderm® AS.
Phase B: Add phase B to A and stir until Cosphaderm® X 34 is completely dissolved.
Phase C: Add phase C under stirring.
Phase D: Add phase D to thicken the formulation.
Adjust the pH to 4.5 ± 0.05.
Specification
Appearance: translucent, yellowish gel
pH: 4.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
NOURISHING. VEGAN. PURIFYING.
Alternative preservation: Cosphaderm® TOM, Cosphaderm® Propanediol natural
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 74.05 | |
| A | Cosphagard® SA natural | Salicylic Acid | Cosphatec GmbH | 1.00 | |
| B | Glycerin | Glycerin | - | 2.00 | |
| B | Aloe Vera Powder | Aloe Barbadensis Leaf Juice Powder | - | 0.25 | |
| B | Cosphaderm® Propanediol natural | Propanediol | Cosphatec GmbH | 5.00 | |
| B | Cosphaderm® X soft | Xanthan Gum | Cosphatec GmbH | 0.50 | |
| C | Coconut Oil | Coco Nucifera Oil | Gustav Heess GmbH | 4.50 | |
| C | Jojoba Oil | Simmondsia Chinensis Seed Oil | Gustav Heess GmbH | 1.00 | |
| C | Cosphaderm® Feel | Triheptanoin | Cosphatec GmbH | 4.00 | |
| C | Almond Oil | Prunus Amygdalus Dulcis Oil | Gustav Heess GmbH | 1.00 | |
| C | Cosphaderm® T-70 NON GMO ECO | Tocopherol Helianthus Annuus Seed Oil | Cosphatec GmbH | 0.10 | |
| C | Cosphaderm® SF-75H | Hydrogenated Lecithin | Cosphatec GmbH | 1.00 | |
| C | Imwitor 960 K | Glyceryl Stearate SE | IOI Oleo GmbH | 4.00 | |
| D | Cosphaderm® TOM | Pentylene Glycol Glyceryl Caprylate Glyceryl Undecylenate | Cosphatec GmbH | 1.60 |
Manufacturing Process
Phase A: Combine water and Cosphagard® SA natural and raise the pH value to 10 – 11. Stir until complete dissolution. Afterwards lower the pH to approximately 6.
Phase B: Add phase B to phase A and stir until everything is completely dissolved. Heat to 70 °C.
Phase C: Combine all ingredients of phase C and heat to 70 °C.
Add phase C to A+B while stirring. Homogenise at 40°C.
Phase D: Add Cosphaderm® TOM to the emulsion.
Adjust pH to 6.0 ± 0.05.
Specification
Appearance: Light beige lotion
pH: 6.0 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
MILD. NATURALLY ACTIVE AGAINST ACNE. CLEANSING.
Alternative preservation: Cosphaderm® LA-T, Cosphaderm® Sodium pAS natural, Cosphaderm® Pentiol natural
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 71.25 | |
| A | Glycerin | Glycerin | - | 4.00 | |
| A | Cosphaderm® PA ECONAT | Phytic Acid Aqua | Cosphatec GmbH | 0.10 | |
| A | Cosphaderm® Sodium pAS natural | Sodium Anisate | Cosphatec GmbH | 0.20 | |
| A | Cosphaderm® LA-T | Levulinic Acid Glycerin Sodium Levulinate Aqua | Cosphatec GmbH | 1.00 | |
| A | Cosphagard® SA natural | Salicylic Acid | Cosphatec GmbH | 1.00 | |
| A | Cosphaderm® Pentiol natural | Pentylene Glycol | Cosphatec GmbH | 3.00 | |
| B | Cosphaderm® X 34 | Xanthan Gum | Cosphatec GmbH | 1.00 | |
| C | Perlastan® SC | Disodium/Sodium Cocoyl Glutamate | Schill + Seilacher Struktol GmbH | 10.30 | |
| C | Cosphaderm® Magnolia Extract 98 | Magnolia Officinalis Bark Extract | Cosphatec GmbH | 0.05 | |
| C | Plantacare® 1200 UP | Lauryl Glucoside | BASF SE | 6.60 | |
| D | WorléeBeads | Hydrogenated Jojoba Oil | Worlée-Chemie GmbH | 1.50 |
Manufacturing Process
Phase A: Combine all ingredients of phase A. Raise the pH to 11 to dissolve Cosphagard® SA natural. When everything is dissolved, lower the pH back to 5-6 again.
Phase B: Add Cosphaderm® X 34 to phase A and stir until everything is completely dissolved.
Phase C: Combine all ingredients of phase C separately. Add then phase C to phase A+B.
Phase D: Add phase D to the finished formulation.
Adjust the pH to 5.5 ± 0.05.
Specification
Appearance: Translucent gel with small peeling beads
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
Newsletter
Register now for our e-mail newsletter and receive the latest information on our products.
Product-relevant information needs to be added here.
