We understand the requirements and issues of cosmetics formulators. That's why we spend a lot of time on application technology in our in-house laboratory. Here we analyse the incorporation and effect of raw materials in order to offer our customers the best possible support and suitable recommendations.
We have provided a selected set of formulations for download here - enjoy!
HYDRATING. ANTIOXIDANT. REGENERATING.
Alternative preservation: Cosphaderm® LAAS, Cosphaderm® GMCY
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 72.80 | |
| A | Cosphaderm® Propanediol natural | Propanediol | Cosphatec GmbH | 3.00 | |
| A | Cosphaderm® X soft | Xanthan Gum | Cosphatec GmbH | 0.30 | |
| A | Cosphaderm® Sodium Hyaluronate low | Sodium Hyaluronate | Cosphatec GmbH | 0.20 | |
| A | Cosphaderm® PA-12 | Sodium Phytate | Cosphatec GmbH | 0.10 | |
| B | Cosphaderm® SB-75H NON GMO | Hydrogenated Lecithin | Cosphatec GmbH | 0.50 | |
| C | Cosphaderm® GS Connect | Glyceryl Stearate Citrate | Cosphatec GmbH | 2.00 | |
| C | Lanette® O | Cetearyl Alcohol | BASF SE | 3.00 | |
| C | Shea Butter refined | Butyrospermum Parkii Butter | Gustav Heess GmbH | 3.00 | |
| C | Cosphaderm® GMCY | Glyceryl Caprylate | Cosphatec GmbH | 0.30 | |
| C | MCT Oil Typ V Ph. Eur. | Caprylic/Capric Triglyceride | Gustav Heess GmbH | 5.00 | |
| C | Cetiol® OE | Dicaprylyl Ether | BASF SE | 4.00 | |
| C | Grape Seed Oil | Vitis Vinifera Seed Oil | Gustav Heess GmbH | 2.00 | |
| D | Cosphaderm® Tocopharin | Carnosic Acid Tocopherol Helianthus Annuus Seed Oil | Cosphatec GmbH | 0.30 | |
| D | Cosphaderm® LAAS | Glycerin Aqua Sodium Levulinate Sodium Anisate | Cosphatec GmbH | 3.50 |
Manufacturing Process
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Adjust pH to 5 – 6 and add phase B. Heat to 75°C.
Phase C: Combine all ingredients of phase C and heat to 75°C.
Add phase C to phase A/B while stirring.
Phase D: Add phase D under 40 °C and homogenise.
Adjust the pH to 5.5 ± 0.05.
Specification
Appearance: White high viscous cream
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
ANTI-AGEING. ANTIOXIDANT. MOISTURISING.
Alternative preservation: Cosphaderm® Dicapo natural, Cosphaderm® Magnolia Extract 98, Cosphaderm® Propanediol natural
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 77.30 | |
| A | Cosphaderm® Propanediol natural | Propanediol | Cosphatec GmbH | 3.00 | |
| A | Cosphaderm® X soft | Xanthan Gum | Cosphatec GmbH | 0.80 | |
| A | Cosphaderm® Sodium Hyaluronate high | Sodium Hyaluronate | Cosphatec GmbH | 0.10 | |
| A | Cosphaderm® Sodium Hyaluronate low | Sodium Hyaluronate | Cosphatec GmbH | 0.10 | |
| A | Sodium PCA | Sodium PCA | - | 0.50 | |
| A | Sodium Citrate | Sodium Citrate | - | 0.50 | |
| A | Cosphaderm® SF-75H | Hydrogenated Lecithin | Cosphatec GmbH | 1.50 | |
| B | Cosphaderm® GS Connect | Glyceryl Stearate Citrate | Cosphatec GmbH | 2.00 | |
| B | Shea Butter refined | Butyrospermum Parkii Butter | Gustav Heess GmbH | 2.00 | |
| B | Jojoba Oil | Simmondsia Chinensis Seed Oil | Gustav Heess GmbH | 4.00 | |
| B | MCT Oil Typ V Ph. Eur. | Caprylic/Capric Triglyceride | Gustav Heess GmbH | 5.00 | |
| B | Camellia Seed Oil | Camellia Oleifera Seed Oil | - | 2.00 | |
| C | Cosphaderm® Dicapo natural | Caprylyl Glycol Propanediol Glyceryl Caprylate | Cosphatec GmbH | 0.70 | |
| C | Cosphaderm® Magnolia Extract 98 | Magnolia Officinalis Bark Extract | Cosphatec GmbH | 0.20 | |
| D | Cosphaderm® Tocopharin | Tocopherol Helianthus Annuus Seed Oil Carnosic Acid | Cosphatec GmbH | 0.30 |
Manufacturing Process
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Combine all ingredients of phase B.
Heat both phases separately to 70-75 °C and add phase B to A while stirring. Then homogenise the formulation.
Phase C: Dissolve Cosphaderm® Magnolia Extract 98 in Cosphaderm® Dicapo natural.
Add phase C and phase D to phase A+B after cooling to 40 °C while stirring. Adjust the pH to 5.5 ± 0.05.
Specification
Appearance: Light beige, shiny, fluid emulsion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
HYDRATING. RADIANT. SKIN PROTECTING.
Alternative preservation: Cosphaderm® Sodium LAAS, Cosphaderm® GMCY, Cosphaderm® Magnolia Extract 98
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 70.95 | |
| A | Cosphaderm® Sodium LAAS | Sodium Levulinate Sodium Anisate | Cosphatec GmbH | 1.00 | |
| A | Cosphaderm® Propanediol natural | Propanediol | Cosphatec GmbH | 4.00 | |
| A | Cosphaderm® X soft | Xanthan Gum | Cosphatec GmbH | 0.60 | |
| B | Cosphaderm® SF-75H | Hydrogenated Lecithin | Cosphatec GmbH | 0.75 | |
| C | Cosphaderm® GS Connect | Glyceryl Stearate Citrate | Cosphatec GmbH | 2.00 | |
| C | Lanette® O | Cetearyl Alcohol | BASF SE | 1.50 | |
| C | Behenyl Alcohol | Behenyl Alcohol | - | 1.00 | |
| C | Shea Butter refined | Butyrospermum Parkii Butter | Gustav Heess GmbH | 5.00 | |
| C | Cosphaderm® GMCY | Glyceryl Caprylate | Cosphatec GmbH | 0.30 | |
| C | Jojoba Oil | Simmondsia Chinensis Seed Oil | Gustav Heess GmbH | 3.50 | |
| C | MCT Oil Typ V Ph. Eur. | Caprylic/Capric Triglyceride | Gustav Heess GmbH | 5.00 | |
| C | Squalane | Squalane | - | 4.00 | |
| D | Cosphaderm® Magnolia Extract 98 | Magnolia Officinalis Bark Extract | Cosphatec GmbH | 0.10 | |
| E | Cosphaderm® Tocopharin | Carnosic Acid Tocopherol Helianthus Annuus Seed Oil | Cosphatec GmbH | 0.30 |
Manufacturing Process
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Add phase B to A while stirring. Then heat the water phase to 70-75 °C.
Phase C: Combine all ingredients of phase C and heat to 75°C. Phase D is added to the oil phase just before emulsion is formed.
Add phase C+D to the water phase while stirring. Homogenise at 40°C.
Add phase E to the emulsion.
Adjust the pH to 5.5 ± 0.05.
Specification
Appearance: Light beige, white cream
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
MAKE-UP REMOVING. SOOTHING. GENTLE CLEANSING.
Alternative preservation: Cosphaderm® Hexiol natural
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Shea Butter refined | Butyrospermum Parkii Butter | Gustav Heess GmbH | 25.70 | |
| A | Kahlwax 2811 | Oryza Sativa Bran Cera | Kahl GmbH & Co. KG | 8.00 | |
| A | Lanette® O | Cetearyl Alcohol | BASF SE | 20.00 | |
| A | MCT Oil Typ V Ph. Eur. | Caprylic/Capric Triglyceride | Gustav Heess GmbH | 10.00 | |
| A | Cetiol® OE | Dicaprylyl Ether | BASF SE | 15.00 | |
| A | Babassu Oil | Orbignya Oleifera (Babassu) Seed Oil | Gustav Heess GmbH | 10.00 | |
| B | Span™ 80 | Sorbitan Oleate | Croda Inc. | 5.00 | |
| B | Plantacare® 2000 UP | Decyl Glucoside | BASF SE | 4.00 | |
| B | Cosphaderm® Hexiol natural | 1,2-Hexanediol | Cosphatec GmbH | 1.50 | |
| C | Bisabolol | Bisabolol | - | 0.50 | |
| C | Cosphaderm® Tocopharin | Tocopherol Helianthus Annuus Seed Oil Carnosic Acid | Cosphatec GmbH | 0.30 |
Manufacturing Process
Combine all ingredients of phase A and heat to 75-80°C until everything has melted.
Then add phase B to phase A and stir until everything is homogeneous. Add phase C and fill into molds.
Specification
Appearance: Slightly yellowish balm
Stability: stable for 3 months at room temperature and 40 °C
Microbiological stability: proven (Water activity value less than 0.75)
VELVET. REGENERATING. FAST-ABSORBING.
Alternative preservation: Cosphaderm® Sodium LAAS, Cosphaderm® Octiol natural
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 77.70 | |
| A | Glycerin | Glycerin | - | 2.00 | |
| A | Cosphaderm® Sodium LAAS | Sodium Levulinate Sodium Anisate | Cosphatec GmbH | 1.00 | |
| A | Cosphaderm® Octiol natural | Caprylyl Glycol | Cosphatec GmbH | 0.30 | |
| A | Cosphaderm® X soft | Xanthan Gum | Cosphatec GmbH | 0.50 | |
| B | Cosphaderm® SF-75H | Hydrogenated Lecithin | Cosphatec GmbH | 0.50 | |
| C | Cosphaderm® GS Connect | Glyceryl Stearate Citrate | Cosphatec GmbH | 2.50 | |
| C | Lanette® 16 | Cetyl Alcohol | BASF SE | 1.20 | |
| C | Shea Butter refined | Butyrospermum Parkii Butter | Gustav Heess GmbH | 3.00 | |
| C | Jojoba Oil | Simmondsia Chinensis Seed Oil | Gustav Heess GmbH | 3.00 | |
| C | Cetiol® CC | Dicaprylyl Carbonate | BASF SE | 2.00 | |
| C | MCT Oil Typ V Ph. Eur. | Caprylic/Capric Triglyceride | Gustav Heess GmbH | 4.00 | |
| C | Squalane | Squalane | - | 2.00 | |
| D | Cosphaderm® Tocopharin | Carnosic Acid Tocopherol Helianthus Annuus Seed Oil | Cosphatec GmbH | 0.30 |
Manufacturing Process
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Add phase B to the water phase while stirring. Then heat the water phase to 70-75 °C.
Phase C: Combine all ingredients of phase C and heat to 75°C.
Add phase C to the water phase while stirring. Add phase D to the emulsion and homogenise.
Adjust the pH to 5.5 ± 0.05.
Specification
Appearance: white, slightly beige viscous lotion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
STIMULATING. CLEANSING. CONDITIONING.
Alternative preservation: Cosphaderm® Pentiol natural, Cosphaderm® Zinc Lactate natural
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 78.70 | |
| A | Cosphaderm® Pentiol natural | Pentylene Glycol | Cosphatec GmbH | 3.00 | |
| A | Sulfopon® 1216 G | Sodium Coco Sulfate | BASF SE | 4.00 | |
| A | Caffeine Powder | Caffeine | - | 1.00 | |
| B | Cosphaderm® X soft | Xanthan Gum | Cosphatec GmbH | 1.20 | |
| B | Cosphaderm® Zinc Lactate natural | Zinc Lactate | Cosphatec GmbH | 0.50 | |
| C | Dehyton® K | Cocamidopropyl Betaine | BASF SE | 6.00 | |
| C | Plantacare® 818 UP | Coco Glucoside | BASF SE | 4.00 | |
| C | Imwitor® 948 | Glyceryl Oleate | IOI Oleo GmbH | 1.00 | |
| C | Argan Oil | Argania Spinosa Kernel Oil | Gustav Heess GmbH | 0.50 | |
| C | Cosphaderm® Tocopharin | Carnosic Acid Tocopherol Helianthus Annuus Seed Oil | Cosphatec GmbH | 0.10 |
Manufacturing Process
Phase A: Combine all ingredients and dissolve Phase A at 40°C. Adjust the pH below 7.
Phase B: Add phase B to phase A under stirring and stir until everything is completely dissolved.
Phase C: Prepare phase C and add to phase A+B under slow stirring to prevent foaming.
Adjust the pH to 5.5 ± 0.05.
Specification
Appearance: Slightly cloudy viscous gel
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
PRECISE SHAVING. MILD. GENTLE.
Oil protection: Cosphaderm® Tocopharin
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Softigen® Pura | Olus Oil | IOI Oleo GmbH | 40.00 | |
| A | MCT Oil Typ V Ph. Eur. | Caprylic/Capric Triglyceride | Gustav Heess GmbH | 30.00 | |
| A | Cosphaderm® Feel | Triheptanoin | Cosphatec GmbH | 12.40 | |
| A | Almond Oil | Prunus Amygdalus Dulcis Oil | Gustav Heess GmbH | 10.00 | |
| A | Babassu Oil | Orbignya Oleifera Seed Oil | Gustav Heess GmbH | 5.00 | |
| A | Argan Oil | Argania Spinosa Kernel Oil | Gustav Heess GmbH | 2.00 | |
| A | Cosphaderm® Octiol natural | Caprylyl Glycol | Cosphatec GmbH | 0.30 | |
| A | Cosphaderm® Tocopharin | Carnosic Acid Tocopherol Helianthus Annuus Seed Oil | Cosphatec GmbH | 0.30 |
Manufacturing Process
Combine all ingredients of phase A and melt until everything is homogeneous.
Specification
Appearance: Cloudy, thickened oil
Stability: Stable for 3 months at room temperature and 40 °C
Microbiological stability: proven (Water activity value less than 0.75)
VEGAN. SATIN-SOFT FINISH. NOURISHING.
Alternative preservation: Cosphaderm® MultiMEG
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Shea Butter refined | Butyrospermum Parkii Butter | Gustav Heess GmbH | 9.90 | |
| A | Carnauba Wax | Copernicia Cerifera Cera | Gustav Heess GmbH | 6.00 | |
| A | Kahlwax 6290 | Rhus Verniciflua Cera | Kahl GmbH & Co. KG | 4.00 | |
| A | Kahlwax 6607L | Helianthus Annuus Seed Cera | Kahl GmbH & Co. KG | 10.00 | |
| A | MCT Oil Typ V Ph. Eur. | Caprylic/Capric Triglyceride | Gustav Heess GmbH | 17.00 | |
| A | Octyldodecanol | Octyldodecanol | - | 15.00 | |
| B | Castor Oil | Ricinus Communis Seed Oil | Gustav Heess GmbH | 20.00 | |
| B | Cosphaderm® MultiMEG | Glyceryl Caprylate Pentylene Glycol Magnolia Officinalis Bark Extract | Cosphatec GmbH | 0.80 | |
| B | Unipure Red LC 381 | CI 77491 | SENSIENT BEAUTY | 6.00 | |
| B | Zinc Oxide | CI 77947 | - | 5.00 | |
| B | Unipure Yellow LC 182 | CI 77492 | SENSIENT BEAUTY | 1.00 | |
| B | Cosphaderm® Tocopharin | Tocopherol Helianthus Annuus Seed Oil Carnosic Acid | Cosphatec GmbH | 0.30 | |
| C | CORN PO4 PH "B“ | Distarch Phosphate | Agrana | 5.00 |
Manufacturing Process
Phase A: Combine all ingredients of phase A and heat to 80-85°C until everything is melted.
Phase B: Disperse phase B. Then add phase B to phase A.
Phase C: Add phase C to the finished formulation and melt again.
Pour into molds.
Specification
Appearance: Red stick
Stability: stable for 3 months at room temperature and 40 °C
Microbiological stability: proven (Water activity value less than 0.75)
BERRY COLOUR. SATIN-SOFT FINISH. NOURISHING.
Alternative preservation: Cosphaderm® MultiMEG
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Shea Butter refined | Butyrospermum Parkii Butter | Gustav Heess GmbH | 5.00 | |
| A | Carnauba Wax | Copernicia Cerifera Cera | Gustav Heess GmbH | 5.00 | |
| A | Kahlwax 6290 | Rhus Verniciflua Cera | Kahl GmbH & Co. KG | 4.00 | |
| A | Kahlwax 6607L | Helianthus Annuus Seed Cera | Kahl GmbH & Co. KG | 10.00 | |
| A | MCT Oil Typ V Ph. Eur. | Caprylic/Capric Triglyceride | Gustav Heess GmbH | 26.40 | |
| A | Octyldodecanol | Octyldodecanol | - | 15.00 | |
| B | Cosphaderm® MultiMEG | Glyceryl Caprylate Pentylene Glycol Magnolia Officinalis Bark Extract | Cosphatec GmbH | 0.80 | |
| B | Unipure Red LC 381 | CI 77491 | SENSIENT BEAUTY | 1.50 | |
| B | Manganese Violett | CI 77742 | - | 15.00 | |
| B | Zinc Oxide | CI 77947 | - | 3.00 | |
| B | Cosphaderm® Tocopharin | Tocopherol Helianthus Annuus Seed Oil Carnosic Acid | Cosphatec GmbH | 0.30 | |
| C | Rice Starch | Oryza Sativa Starch | - | 5.00 |
Manufacturing Process
Phase A: Combine all ingredients of phase A and heat to 80-85°C until everything is melted.
Phase B: Add phase B to phase A.
Phase C: Add phase C to the finished formulation.
Pour into molds.
Specification
Appearance: Berry-coloured stick
Stability: stable for 3 months at room temperature and 40 °C
Microbiological stability: proven (Water activity value less than 0.75)
Newsletter
Register now for our e-mail newsletter and receive the latest information on our products.
Product-relevant information needs to be added here.
