FORMULIERUNGEN

Phase A: Combine all ingredients of phase A. Raise the pH to 11 to dissolve Cosphagard® SA natural completely.
Phase B: Add phase B and lower the pH to 4.0 ± 0.05.

Appearance: Clear, liquid solution
pH: 4.0 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

Phase A: Mix all ingredients together.
Phase B: Slowly add Cosphaderm® X 34 and Aristoflex® AVC under stirring to phase A. Continue stirring until complete dissolution. Then heat to 80 °C.
Phase C: Mix all ingredients and heat to 80 °C. Add phase C to phase A+B and homogenise.
Phase D: Add Cosphaderm® Dicapo below 40 °C under stirring.
Adjust the pH to 5.5 ± 0.05.

Appearance: Light beige, shiny, viscous emulsion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

Phase A: Combine all ingredients of phase A and stir until complete dissolution.
Adjust the pH value to 5.5 ± 0.05.
Phase B: Prepare phase B in a separate beaker.
Add phase B to phase A without stirring and pour mixture into spray flask.

Appearance: Liquid two-phase system with oil phase on top of transparent water phase
pH: 5.5 ± 0.05
Stability: Stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

Phase A: Combine all ingredients of phase A. Heat phase A to 40 °C.Raise the pH to 11 to dissolve Cosphagard® SA natural.
Phase B: Add phase B to A and stir until Cosphaderm® X 34 is completely dissolved.
Phase C: Add phase C under stirring.
Phase D: Add phase D to thicken the formulation.
Adjust the pH to 4.5 ± 0.05.

Appearance: translucent, yellowish gel
pH: 4.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

Phase A: Combine all ingredients of phase A. Heat phase A to 40 °C.Raise the pH to 11 to dissolve Cosphagard® SA natural and Cosphaderm® pAS natural.
Phase B: Add phase B to A and stir until Cosphaderm® X 34 is completely dissolved.
Phase C: Add phase C under stirring.
Phase D: Add phase D to thicken the formulation.
Adjust the pH to 4.5 ± 0.05.

Appearance: translucent, yellowish gel
pH: 4.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

Phase A: Combine all ingredients of phase A. Heat phase A to 40 °C.Raise the pH to 11 to dissolve Cosphagard® SA natural and Cosphaderm® AS.
Phase B: Add phase B to A and stir until Cosphaderm® X 34 is completely dissolved.
Phase C: Add phase C under stirring.
Phase D: Add phase D to thicken the formulation.
Adjust the pH to 4.5 ± 0.05.

Appearance: translucent, yellowish gel
pH: 4.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

Phase A: Combine all ingredients of phase A and stir slowly until everything is completely dissolved.
Phase B: Combine all ingredients of phase B.
Add phase B to phase A under stirring with the propeller stirrer.
Adjust the pH to 5.5 ± 0.05.

Appearance: Milky, white viscous gel
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Combine all ingredients of phase B.
Heat both phases separately to 70-75 °C and add phase B to A while homogenising.
Phase C: Dissolve Cosphaderm® Magnolia Extract 98 in Cosphaderm® Diols. Add phase C to phase A/B under stirring.
Adjust the pH to 4.0 ± 0.05.

Appearance: Beige, viscous gel cream
pH: 4.0 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

Phase A: Combine all ingredients of phase A.
Phase B: Add phase B to A carefully to avoid foaming.
Adjust the pH to 5.5 ± 0.05.

Appearance: Transparent liquid solution
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

Phase A: Combine all ingredients of phase A and stir until everything is dissolved.
Phase B: Add phase B to phase A under stirring.
Phase C: Combine all ingredients of phase C separately. Add then phase C to phase A and B under stirring.
Adjust pH to 5.5 ± 0.05.

Appearance: Transparent liquid solution
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

Phase A: Combine all ingredients of phase A and stir until everything is dissolved. Heat to 65 °C.
Phase B: Prepare all ingredients of phase B and heat to 65 °C.
Add phase B to phase A under stirring. Homogenise.
Adjust the pH to 5.5 ± 0.05 if necessary.

Appearance: White viscous gel cream
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

Phase A: Combine all ingredients and stir until everything is completely dissolved.
Phase B: Combine phase B separately and add phase B to phase A under soft stirring. Stir until both phases are mixed.
Phace C: Add phenylpropanol to phase A+B. Adjust th pH to 5.5 ± 0.05.

Appearance: Transparent, viscous liquid
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

Phase A: Combine all ingredients of phase A. Raise the pH to 11 to dissolve Cosphagard® SA natural. When everything is dissolved, lower the pH back to 5-6 again.
Phase B: Add Cosphaderm® X 34 to phase A and stir until everything is completely dissolved.
Phase C: Combine all ingredients of phase C separately. Add then phase C to phase A+B.
Phase D: Add phase D to the finished formulation.
Adjust the pH to 5.5 ± 0.05.

Appearance: Translucent gel with small peeling beads
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

Phase A: Mix all ingredients of phase A under slow stirring.
Phase B: Mix all ingredients of phase B until everything is completely dissolved and add B to phase A.
Adjust the pH of phase A+B to 5.5 ± 0.05.
Phase C: Mix all ingredients of phase C and add the mixture to phase A+B without stirring.

Appearance: Two-phase system with coloured oil phase on top of transparent water phase
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven