FORMULIERUNGEN

Phase A: Mix phase A and stir until everything is completely dissolved.
Phase B: Add phase B to phase A and stir until dispersed.
Phase C: Slowly add phase C to phase A+B and stir until complete dissolution.
Phase D: Mix all ingredients of phase D and heat phase A+B+C and D separately to 80 °C.
Add phase D slowly to phase A+B+C while stirring.
Phase E: Add phase E to the finished formulation (below 40 °C).
Adjust the pH to 5.5 ± 0.05.

Appearance: Shiny, fluid emulsion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

Phase A: Prepare phase A.
Phase B: Pre-disperse phase B and add to the water phase while stirring. Stir until everything is completely dissolved.
Adjust the pH to 5.5 – 6.0 ± 0.05.
Heat the mixture to its boiling point and keep this temperature for 2 – 3 minutes.
Quickly pour the hot mixture into a casting mould and let it cool.

Appearance: Transparent or coloured, elastic jelly patch
pH: 5.5 – 6.0 ± 0.05
Stability: Stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

Phase A: Combine all ingredients of phase A and stir until complete dissolution.
Adjust the pH value to 5.5 ± 0.05.
Phase B: Prepare phase B in a separate beaker.
Add phase B to phase A without stirring and pour mixture into spray flask.

Appearance: Liquid two-phase system with oil phase on top of transparent water phase
pH: 5.5 ± 0.05
Stability: Stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

Phase A: Combine all ingredients of phase A.
Phase B: Add phase B to phase A while stirring and stir until everything is completely dissolved.
Phase C: Prepare phase C and add to phase A+B under slow stirring to prevent foaming.
Adjust pH to 5.5 ± 0.05.

Appearance: Transparent, viscous gel
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

Phase A: Mix all ingredients of phase A under slow stirring.
Phase B: Mix all ingredients of phase B until everything is completely dissolved and add B to phase A.
Adjust the pH of phase A+B to 5.5 ± 0.05.
Phase C: Mix all ingredients of phase C and add the mixture to phase A+B without stirring.

Appearance: Two-phase system with coloured oil phase on top of transparent water phase
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven