Wir verstehen die Anforderungen und Fragestellungen von Kosmetik-Entwicklern. Darum verbringen wir viel Zeit mit Anwendungstechnik in unserem In-House Labor. Hier untersuchen wir die Einarbeitung und Wirkung von Rohstoffen, um unseren Kunden den bestmöglichen Support und passende Empfehlungen bieten zu können.
Ein ausgewähltes Set an Formulierungen haben wir hier zum Download bereitgestellt – viel Spaß damit!
QUICKLY ABSORBING. RICH SKIN FEEL. HYDRATING.
Alternative preservation: Cosphaderm® LA-T, Cosphaderm® AS
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 82.20 | |
| A | Cosphaderm® AS | p-Anisic Acid | Cosphatec GmbH | 0.40 | |
| A | Cosphaderm® LA-T | Levulinic Acid Glycerin Sodium Levulinate Aqua | Cosphatec GmbH | 1.20 | |
| B | Glycerin | Glycerin | - | 4.00 | |
| B | Cosphaderm® X soft | Xanthan Gum | Cosphatec GmbH | 1.00 | |
| B | Cosphaderm® Sodium Hyaluronate low | Sodium Hyaluronate | Cosphatec GmbH | 0.20 | |
| C | Cosphaderm® SF-75H | Hydrogenated Lecithin | Cosphatec GmbH | 3.50 | |
| C | Sunflower Oil | Helianthus Annuus Seed Oil | Gustav Heess GmbH | 5.00 | |
| C | Jojoba Oil | Simmondsia Chinensis Seed Oil | Gustav Heess GmbH | 2.50 |
Manufacturing Process
Phase A: Prepare phase A. Raise the pH to 10 to dissolve Cosphaderm® AS natural and stir until everything is completely dissolved. Afterwards, adjust the pH to 5.5 ± 0.05 by adding Citric Acid.
Phase B: Prepare phase B and add it to phase A while stirring. Stir until everything is completely dissolved.
Phase C: Prepare phase C and add it to phase A/B. Homogenise.
Adjust pH value to 5.5 ± 0.05.
Specification
Appearance: Beige, shiny, low viscous emulsion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
CLEANSING. FOAMING. NATURALLY ACTIVE AGAINST DANDRUFF.
Alternative preservation: Cosphaderm® LA-T, Cosphaderm® AS
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 77.45 | |
| A | Sodium Coco-Sulfate | Sodium Coco Sulfate | - | 10.00 | |
| A | Plantacare® 1200 UP | Lauryl Glucoside | BASF SE | 4.00 | |
| A | Dehyton® K | Cocamidopropyl Betaine | BASF SE | 2.00 | |
| A | SOFTISAN® conditionHAIR | PCA Glyceryl Oleate | IOI Oleo GmbH | 1.00 | |
| A | Cosphagard® SA natural | Salicylic Acid | Cosphatec GmbH | 3.00 | |
| A | Cosphaderm® AS | p-Anisic Acid | Cosphatec GmbH | 0.20 | |
| B | Cosphaderm® X 34 | Xanthan Gum | Cosphatec GmbH | 0.50 | |
| C | Cosphaderm® PA ECONAT | Phytic Acid Aqua | Cosphatec GmbH | 0.10 | |
| C | Cosphaderm® LA-T | Levulinic Acid Glycerin Sodium Levulinate Aqua | Cosphatec GmbH | 1.00 | |
| D | Sodium Chloride | Sodium Chloride | - | 0.75 |
Manufacturing Process
Phase A: Combine all ingredients of phase A. Heat phase A to 40 °C.Raise the pH to 11 to dissolve Cosphagard® SA natural and Cosphaderm® AS.
Phase B: Add phase B to A and stir until Cosphaderm® X 34 is completely dissolved.
Phase C: Add phase C under stirring.
Phase D: Add phase D to thicken the formulation.
Adjust the pH to 4.5 ± 0.05.
Specification
Appearance: translucent, yellowish gel
pH: 4.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
Newsletter
Jetzt für unseren E-Mail-Newsletter anmelden und aktuelle Informationen zu unseren Produkten erhalten.
Bitte alle *Pflichtfelder ausfüllen
