FORMULIERUNGEN

MODERNE KOSMETIK FÜR ANSPRUCHSVOLLE ENTWICKLER

Wir verstehen die Anforderungen und Fragestellungen von Kosmetik-Entwicklern. Darum verbringen wir viel Zeit mit Anwendungstechnik in unserem In-House Labor. Hier untersuchen wir die Einarbeitung und Wirkung von Rohstoffen, um unseren Kunden den bestmöglichen Support und passende Empfehlungen bieten zu können.

Ein ausgewähltes Set an Formulierungen haben wir hier zum Download bereitgestellt – viel Spaß damit!

FaceCare

ANTI SPOT GEL ALL NATURAL INGREDIENTS

100.70.1.1

ANTI INFLAMMATORY. CLARIFYING. PORE SIZE REDUCING.

Alternative preservation: Cosphaderm® Zinc Lactate natural, Cosphaderm® Propanediol natural

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
88.20
A Cosphaderm® Propanediol natural
Propanediol
Cosphatec GmbH
5.00
A Cosphagard® SA natural
Salicylic Acid
Cosphatec GmbH
2.00
B Glycerin
Glycerin
CREMER OLEO GmbH & Co. KG
2.50
B Cosphaderm® X soft
Xanthan Gum
Cosphatec GmbH
0.70
B Cosphaderm® Sodium Hyaluronate high
Sodium Hyaluronate
Cosphatec GmbH
0.10
C Cosphaderm® Zinc Lactate natural
Zinc Lactate
Cosphatec GmbH
1.00
C Hamamelis Virginiana Leaf Water
Hamamelis Virginiana Leaf Water
-
0.50

Manufacturing Process
Phase A: Combine all ingredients of phase A. Raise the pH to 11 to dissolve Cosphagard® SA natural. When everything is dissolved, lower the pH back to 4-5 again.
Phase B: Combine Glycerin, Cosphaderm® X 34 and Cosphaderm® Sodium Hyaluronate high and stir until the powder is wetted. Then add it to phase A.
Phase C: Add phase C under stirring.
Adjust the pH to 4.0 ± 0.05.

Specification
Appearance: Transparent, semi-viscous gel
pH: 4.0 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

ANTI-WRINKLE BASE

100.39.1.1

PORE FILLING. LONG LASTING. MINIMALISTIC FORMULATION.

Alternative preservation: Cosphaderm® Octiol, Cosphaderm® Propanediol natural

PHASE Ingredient Cosmos INCI SUPPLIER %
A Glycerin
Glycerin
CREMER OLEO GmbH & Co. KG
6.00
A Natrosol® 250 HX
Hydroxyethylcellulose
-
1.00
A Cosphaderm® Propanediol natural
Propanediol
Cosphatec GmbH
4.50
A Cosphaderm® Sodium Hyaluronate high
Sodium Hyaluronate
Cosphatec GmbH
0.20
B Demin. Water
Aqua
-
88.00
C Cosphaderm® Octiol
Caprylyl Glycol
Cosphatec GmbH
0.30
C Phenylpropanol
Phenylpropanol
-
0.20

Manufacturing Process
Phase A: Disperse the thickeners in glycerol and Cosphaderm® Propanediol natural.
Phase B: Add demin. water and stir until everything is dissolved.
Phase C: Add phase C to A/B.
Adjust the pH to 5.5 ± 0.05.

Specification
Appearance: Translucent, viscous gel
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

BOOSTING SERUM ALL NATURAL INGREDIENTS

100.7.4.1

ANTI-AGING. FAST ABSORBING. HYDRATING.

Alternative preservation: Cosphaderm® Propanediol natural, Cosphaderm® Octiol natural, Cosphaderm® CHA

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
93.10
A Cosphaderm® CHA
Caprylhydroxamic Acid
Cosphatec GmbH
0.10
B Glycerin
Glycerin
CREMER OLEO GmbH & Co. KG
5.00
B Cosphaderm® Propanediol natural
Propanediol
Cosphatec GmbH
1.00
B Cosphaderm® Octiol natural
Caprylyl Glycol
0.30
B Cosphaderm® Sodium Hyaluronate high
Sodium Hyaluronate
Cosphatec GmbH
0.30
B Cosphaderm® Sodium Hyaluronate low
Sodium Hyaluronate
Cosphatec GmbH
0.20

Manufacturing Process
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Combine all ingredients of phase B separately and add to phase A under stirring.
Adjust pH to 5.5 ± 0.05 if necessary.

Specification
Appearance: Transparent, low viscous serum
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

HYDRATING HYALURON SERUM

100.117.1.1

PORE REFINING. MOISTURISING. SMOOTHING.

Alternative preservation: Cosphaderm® Pentiol natural, Cosphaderm® Zinc Lactate natural

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
88.50
A Cosphaderm® Pentiol natural
Pentylene Glycol
Cosphatec GmbH
2.00
A D-Panthenol 75 %
PanthenolAqua
-
0.50
B Glycerin
Glycerin
CREMER OLEO GmbH & Co. KG
3.00
B Cosphaderm® Sodium Hyaluronate high
Sodium Hyaluronate
Cosphatec GmbH
0.30
B Cosphaderm® Sodium Hyaluronate low
Sodium Hyaluronate
Cosphatec GmbH
0.20
C Cosphaderm® Zinc Lactate natural
Zinc Lactate
Cosphatec GmbH
0.50
C RonaCare® Niacinamide
Niacinamide
Merck KGaA
5.00

Manufacturing Process
Phase A: Combine all ingredients of phase A.
Phase B: Combine all ingredients of phase B separately and add to phase A under stirring.
Phase C: Add phase C to A/B and stir until everything is completely dissolved.
Adjust pH to 5.5 ± 0.05.

Specification
Appearance: Transparent, low viscous serum
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

VITAMIN C GLOW DROPS

100.84.1.1

ANTI-AGING. PORE-REFINING. HYDRATING.

Alternative preservation: Cosphaderm® Heptiol natural

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
87.65
A Cosphaderm® Heptiol natural
1,2-Heptanediol
Cosphatec GmbH
1.00
A Glycerin
Glycerin
CREMER OLEO GmbH & Co. KG
2.00
A Inulin
Inulin
-
1.00
A Sodium PCA
Sodium PCA
-
0.50
A RonaCare® Nicotinamide
Niacinamide
Merck KGaA
5.00
B Sodium Ascorbyl Phosphate
Sodium Ascorbyl Phosphate
-
2.00
B Sodium Gluconate
Sodium Gluconate
-
0.15
C Cosphaderm® Sodium Hyaluronate low
Sodium Hyaluronate
Cosphatec GmbH
0.20
C Cosphaderm® Sodium Hyaluronate high
Sodium Hyaluronate
Cosphatec GmbH
0.30
C Cosphaderm® X soft
Xanthan Gum
Cosphatec GmbH
0.20

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Add phase B to phase A.
Phase C: Add phase C and stir until everything is completely dissolved.
Adjust pH to 6.5 ± 0.05 if necessary.

SPECIFICATION
Appearance: Transparent, low viscous serum
pH: 6.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

ANTI-POLLUTION SERUM ALL NATURAL INGREDIENTS

100.92.1.1

ANTI-AGEING. ANTIOXIDANT. MOISTURISING.

Alternative preservation: Cosphaderm® Dicapo natural, Cosphaderm® Magnolia Extract 98, Cosphaderm® Propanediol natural

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
77.30
A Cosphaderm® Propanediol natural
Propanediol
Cosphatec GmbH
3.00
A Cosphaderm® X soft
Xanthan Gum
Cosphatec GmbH
0.80
A Cosphaderm® Sodium Hyaluronate high
Sodium Hyaluronate
Cosphatec GmbH
0.10
A Cosphaderm® Sodium Hyaluronate low
Sodium Hyaluronate
Cosphatec GmbH
0.10
A Sodium PCA
Sodium PCA
-
0.50
A Sodium Citrate
Sodium Citrate
-
0.50
A Cosphaderm® SF-75H
Hydrogenated Lecithin
Cosphatec GmbH
1.50
B Cosphaderm® GS Connect
Glyceryl Stearate Citrate
Cosphatec GmbH
2.00
B Shea Butter refined
Butyrospermum Parkii Butter
Gustav Heess GmbH
2.00
B Jojoba Oil
Simmondsia Chinensis Seed Oil
Gustav Heess GmbH
4.00
B MCT Oil Typ V Ph. Eur.
Caprylic/Capric Triglyceride
Gustav Heess GmbH
5.00
B Camellia Seed Oil
Camellia Oleifera Seed Oil
-
2.00
C Cosphaderm® Dicapo natural
Caprylyl GlycolPropanediolGlyceryl Caprylate
Cosphatec GmbH
0.70
C Cosphaderm® Magnolia Extract 98
Magnolia Officinalis Bark Extract
Cosphatec GmbH
0.20
D Cosphaderm® Tocopharin
TocopherolHelianthus Annuus Seed OilCarnosic Acid
Cosphatec GmbH
0.30

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Combine all ingredients of phase B.
Heat both phases separately to 70-75 °C and add phase B to A while stirring. Then homogenise the formulation.
Phase C: Dissolve Cosphaderm® Magnolia Extract 98 in Cosphaderm® Dicapo natural.
Add phase C and phase D to phase A+B after cooling to 40 °C while stirring. Adjust the pH to 5.5 ± 0.05.

SPECIFICATION
Appearance: Light beige, shiny, fluid emulsion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

ULTRA HYDRATING SERUM ALL NATURAL INGREDIENTS

100.106.1.1

ANTI-AGING. REGENERATING. SMOOTHING.

Alternative preservation: Cosphaderm® MultiMEG

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
83.10
A Glycerin
Glycerin
CREMER OLEO GmbH & Co. KG
5.00
A Cosphaderm® PA-12
Sodium Phytate
Cosphatec GmbH
0.10
A Cosphaderm® X soft
Xanthan Gum
Cosphatec GmbH
0.40
A Cosphaderm® Sodium Hyaluronate high
Sodium Hyaluronate
Cosphatec GmbH
0.20
A Cosphaderm® Sodium Hyaluronate low
Sodium Hyaluronate
Cosphatec GmbH
0.10
B Olivem® 1000
Cetearyl OlivateSorbitan Olivate
Hallstar
2.50
B MCT Oil Typ V Ph. Eur.
Caprylic/Capric Triglyceride
Gustav Heess GmbH
5.00
B Grape Seed Oil
Vitis Vinifera Seed Oil
Gustav Heess GmbH
2.00
B Cosphaderm® T-70 NON GMO ECO
TocopherolHelianthus Annuus Seed Oil
Cosphatec GmbH
0.20
C Cosphaderm® MultiMEG
Glyceryl CaprylatePentylene GlycolMagnolia Officinalis Bark Extract
Cosphatec GmbH
1.40

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Heat to 75 °C.
Phase B: Combine all ingredients and heat to 75 °C. Add then phase B to phase A under strong stirring and homogenise.
Phase C: Add phase C to the formulation and stir.
Adjust the pH to 5.5 ± 0.05.

SPECIFICATION
Appearance: White, fluid emulsion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

CALMING HYDRO MASK ALL NATURAL INGREDIENTS

100.104.1.1

SOOTHING. MOISTURISING. ANTI-BLEMISH.

Alternative preservation: Cosphaderm® Hexiol, Cosphaderm® Zinc Lactate natural, Cosphaderm® Magnolia Extract 98

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
74.65
A Cosphaderm® Zinc Lactate natural
Zinc Lactate
Cosphatec GmbH
0.50
A Glycerin
Glycerin
CREMER OLEO GmbH & Co. KG
3.00
A Cosphaderm® Hexiol natural
1,2-Hexanediol
Cosphatec GmbH
2.00
A Cosphaderm® Sodium Hyaluronate high
Sodium Hyaluronate
Cosphatec GmbH
0.10
A Cosphaderm® Sodium Hyaluronate low
Sodium Hyaluronate
Cosphatec GmbH
0.10
A Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.40
B Olivem® 1000
Cetearyl OlivateSorbitan Olivate
Hallstar
3.00
B Lanette® 16
Cetyl Alcohol
BASF SE
2.00
B Macadamia Oil
Macadamia Ternifolia Seed Oil
Gustav Heess GmbH
4.00
B MCT Oil Typ V Ph. Eur.
Caprylic/Capric Triglyceride
Gustav Heess GmbH
4.00
B Shea Butter refined
Butyrospermum Parkii Butter
Gustav Heess GmbH
5.00
B Evening Primrose Oil
Oenothera Biennis Oil
Gustav Heess GmbH
1.00
B Cosphaderm® T-70 NON GMO ECO
TocopherolHelianthus Annuus Seed Oil
Cosphatec GmbH
0.20
C Cosphaderm® Magnolia Extract 98
Magnolia Officinalis Bark Extract
Cosphatec GmbH
0.05

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Heat to 70-75 °C.
Phase B: Combine all ingredients of phase B and heat to 75°C. Phase C is added to the oil phase just before emulsion is formed.
Add phase B+C to the water phase while stirring. Homogenise at 40°C.
Adjust the pH to 5.5 ± 0.05.

SPECIFICATION
Appearance: White, viscous cream
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

DEEP HYDRATION SHEET MASK ALL NATURAL INGREDIENTS

100.118.1.1

ANTI-AGEING. MOISTURISING. SOOTHING.

Alternative preservation: Cosphaderm® Hexiol natural, Cosphaderm® Sodium pAS natural

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
87.10
A Cosphaderm® Propanediol natural
Propanediol
Cosphatec GmbH
4.00
A Cosphaderm® Hexiol natural
1,2-Hexanediol
Cosphatec GmbH
2.00
A D-Panthenol 75 %
PanthenolAqua
-
0.50
A Aloe Vera Powder
Aloe Barbadensis Leaf Juice Powder
Worlée-Chemie GmbH
0.10
A Ronacare® Allantoin
Allantoin
Merck KGaA
0.20
A Cosphaderm® Sodium pAS natural
Sodium Anisate
Cosphatec GmbH
0.30
B Glycerin
Glycerin
CREMER OLEO GmbH & Co. KG
5.00
B Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.50
B Cosphaderm® Sodium Hyaluronate high
Sodium Hyaluronate
Cosphatec GmbH
0.20
B Cosphaderm® Sodium Hyaluronate low
Sodium Hyaluronate
Cosphatec GmbH
0.10

Manufacturing Process
Phase A: Combine all ingredients of phase A.
Phase B: Prepare phase B and slowly add to phase A under stirring. Continue stirring until everything is completely dissolved.
Adjust pH to 5.5 ± 0.05.

Specification
Appearance: Transparent, low viscous serum
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

JELLY EYE PATCHES

100.88.1.1

HYDRATING. REFRESHING. ANTI-AGEING.

Alternative preservation: Cosphaderm® Heptiol natural, Cosphaderm® Pentiol natural

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
87.60
A Cosphaderm® Pentiol natural
Pentylene Glycol
Cosphatec GmbH
4.00
A Cosphaderm® Heptiol natural
1,2-Heptanediol
Cosphatec GmbH
1.00
B Glycerin
Glycerin
CREMER OLEO GmbH & Co. KG
3.00
B Cosphaderm® Sodium Hyaluronate high
Sodium Hyaluronate
Cosphatec GmbH
0.20
B Cosphaderm® Sodium Hyaluronate low
Sodium Hyaluronate
Cosphatec GmbH
0.20
B Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.50
B Cosphaderm® KG
Amorphophallus Konjac Root Extract
Cosphatec GmbH
0.50
B RonaCare® Nicotinamide
Niacinamide
Merck KGaA
3.00

MANUFACTURING PROCESS
Phase A: Prepare phase A.
Phase B: Pre-disperse phase B and add to the water phase while stirring. Stir until everything is completely dissolved.
Adjust the pH to 5.5 – 6.0 ± 0.05.
Heat the mixture to 80-90°C and keep this temperature for 2 – 3 minutes.
Quickly pour the hot mixture into moulds and let it cool down.

SPECIFICATION
Appearance: Transparent or coloured, elastic jelly patch
pH: 5.5 – 6.0 ± 0.05
Stability: Stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

HYDRO BOOST LIP BALM ALL NATURAL INGREDIENTS

100.77.1.1

HYDRATING. NOURISHING. PROTECTING.

Oil protection: Cosphaderm® T-70 NON GMO

PHASE Ingredient Cosmos INCI SUPPLIER %
A Lanette® 16
Cetyl Alcohol
Ecogreen Oleochemicals
15.35
A Castor Oil
Ricinus Communis Seed Oil
Gustav Heess GmbH
15.00
A Octyldodecanol
Octyldodecanol
-
20.00
A Kahlwax 2811
Oryza Sativa Bran Cera
Kahl GmbH & Co. KG
2.00
A Beeswax
Cera alba
Gustav Heess GmbH
29.00
A Cosphaderm® Sodium Hyaluronate high
Sodium Hyaluronate
Cosphatec GmbH
0.15
A Cosphaderm® T-70 NON GMO ECO
TocopherolHelianthus Annuus Seed Oil
Cosphatec GmbH
0.50
A Shea Butter refined
Butyrospermum Parkii Butter
Gustav Heess GmbH
10.00
A Jojoba Oil
Simmondsia Chinensis Seed Oil
Gustav Heess GmbH
8.00

MANUFACTURING PROCESS
Combine all ingredients of phase A and heat to 80-85 °C.
When everything has melted, take off heat and fill into packaging.

SPECIFICATION
Appearance: Solid, yellowish balm
Stability: Stable for 3 months at room temperature and 40 °C
Microbiological stability: proven (Water activity value less than 0.75)

Babycare

CALMING BABY LOTION ALL NATURAL INGREDIENTS

500.43.2.1

NATURALLY MILD. SOOTHING. MOISTURISING.

Alternative preservation: Cosphaderm® LA-T, Cosphaderm® GMCY

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
80.60
A Glycerin
Glycerin
CREMER OLEO GmbH & Co. KG
3.00
A Cinnamic Acid
Cinnamic Acid
-
0.20
A Cosphaderm® LA-T
Levulinic AcidGlycerinSodium LevulinateAqua
Cosphatec GmbH
1.00
B Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.30
B Cosphaderm® Sodium Hyaluronate high
Sodium Hyaluronate
Cosphatec GmbH
0.20
C PolyAquol®-2W
Polyglyceryl-2 StearateGlyceryl StearateStearyl Alcohol
Innovacos
2.50
C Lanette® 16
Cetyl Alcohol
BASF SE
1.00
C Cosphaderm® SF-75H
Hydrogenated Lecithin
Cosphatec GmbH
2.00
C Beeswax white
Cera alba
Gustav Heess GmbH
2.50
C Shea Butter refined
Butyrospermum Parkii Butter
Gustav Heess GmbH
3.00
C Argan Oil
Argania Spinosa Kernel Oil
Gustav Heess GmbH
2.00
C Cosphaderm® Feel
Triheptanoin
Cosphatec GmbH
1.00
C Cosphaderm® T-70 NON GMO ECO CC
TocopherolHelianthus Annuus Seed Oil
Cosphatec GmbH
0.20
C Cosphaderm® GMCY
Glyceryl Caprylate
Cosphatec GmbH
0.50

Manufacturing Process
Phase A: Combine all ingredients of phase A and raise the pH to 11 under stirring to dissolve cinnamic acid. When everything is dissolved, lower the pH back to 6 again.
Add phase B to A and stir until everything is dissolved. Heat phase A/B to 75 °C.
Phase C: Combine all ingredients and heat to 80 °C. Add then phase C to phase A/B under strong stirring and homogenise.
Adjust the pH to 5.5 ± 0.05.

Specification
Appearance: White viscous emulsion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven