We understand the requirements and issues of cosmetics formulators. That's why we spend a lot of time on application technology in our in-house laboratory. Here we analyse the incorporation and effect of raw materials in order to offer our customers the best possible support and suitable recommendations.
We have provided a selected set of formulations for download here - enjoy!
COOLING. STRESS-RELIEVING. FAST ABSORBING.
Alternative preservation: Cosphaderm® LA-T, Cosphaderm® Pentiol GL
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 78.40 | |
| A | Glycerin | Glycerin | - | 5.00 | |
| A | Cinnamic Acid | Cinnamic Acid | - | 0.20 | |
| A | Cosphaderm® LA-T | Levulinic Acid Glycerin Sodium Levulinate Aqua | Cosphatec GmbH | 1.00 | |
| B | Cosphaderm® X soft | Xanthan Gum | Cosphatec GmbH | 0.50 | |
| B | Cosphaderm® Sodium Hyaluronate | Sodium Hyaluronate | Cosphatec GmbH | 0.20 | |
| B | Panthenol | Panthenol Aqua | - | 1.00 | |
| B | Cosphaderm® Pentiol GL | Pentylene Glycol | Cosphatec GmbH | 3.00 | |
| B | Witch Hazel Water | Hamamelis Virginiana Leaf Water | - | 10.00 | |
| B | Ronacare® Allantoin | Allantoin | SUSONITY | 0.20 | |
| B | Aloe Vera Powder | Aloe Barbadensis Leaf Juice Powder | - | 0.50 |
Manufacturing Process
Phase A: Combine all ingredients of phase A and raise the pH to 11 to dissolve cinnamic acid. When everything is dissolved, lower the pH back to 6 again.
Phase B: Add all ingredients of phase B to phase A and stir until a slightly viscous gel is formed.
Adjust pH to 5.5 ± 0.05.
Specification
Appearance: Yellowish, transparent, slightly viscous gel
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
QUICKLY ABSORBING. RICH SKIN FEEL. HYDRATING.
Alternative preservation: Cosphaderm® LA-T, Cosphaderm® Sodium pAS natural
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 82.20 | |
| A | Glycerin | Glycerin | - | 4.00 | |
| A | Cosphaderm® X soft | Xanthan Gum | Cosphatec GmbH | 1.00 | |
| A | Cosphaderm® Sodium Hyaluronate low | Sodium Hyaluronate | Cosphatec GmbH | 0.20 | |
| A | Cosphaderm® LA-T | Levulinic Acid Glycerin Sodium Levulinate Aqua | Cosphatec GmbH | 1.20 | |
| B | Cosphaderm® Sodium pAS natural | Sodium Anisate | Cosphatec GmbH | 0.40 | |
| C | Cosphaderm® SF-75H | Hydrogenated Lecithin | Cosphatec GmbH | 3.50 | |
| C | Sunflower Oil | Helianthus Annuus Seed Oil | Gustav Heess GmbH | 5.00 | |
| C | Jojoba Oil | Simmondsia Chinensis Seed Oil | Gustav Heess GmbH | 2.50 |
Manufacturing Process
Phase A: Prepare phase A and stir until everything is completely dissolved. Adjust pH value to 5.5.
Phase B: Add Cosphaderm® Sodium pAS natural to phase A under stirring.
Phase C: Prepare phase C and add it to phase A/B. Homogenise.
Adjust pH value to 5.5 ± 0.05.
Specification
Appearance: Beige, shiny, low viscous emulsion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
QUICKLY ABSORBING. RICH SKIN FEEL. HYDRATING.
Alternative preservation: Cosphaderm® LA-T, Cosphaderm® pAS natural
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 82.20 | |
| A | Cosphaderm® pAS natural | p-Anisic Acid | Cosphatec GmbH | 0.40 | |
| A | Cosphaderm® LA-T | Levulinic Acid Glycerin Sodium Levulinate Aqua | Cosphatec GmbH | 1.20 | |
| B | Glycerin | Glycerin | - | 4.00 | |
| B | Cosphaderm® X soft | Xanthan Gum | Cosphatec GmbH | 1.00 | |
| B | Cosphaderm® Sodium Hyaluronate low | Sodium Hyaluronate | Cosphatec GmbH | 0.20 | |
| C | Cosphaderm® SF-75H | Hydrogenated Lecithin | Cosphatec GmbH | 3.50 | |
| C | Sunflower Oil | Helianthus Annuus Seed Oil | Gustav Heess GmbH | 5.00 | |
| C | Jojoba Oil | Simmondsia Chinensis Seed Oil | Gustav Heess GmbH | 2.50 |
Manufacturing Process
Phase A: Prepare phase A. Raise the pH to 10 to dissolve Cosphaderm® pAS natural and stir until everything is completely dissolved. Afterwards, adjust the pH to 5.5 ± 0.05 by adding Citric Acid.
Phase B: Prepare phase B and add it to phase A while stirring. Stir until everything is completely dissolved.
Phase C: Prepare phase C and add it to phase A/B. Homogenise.
Adjust pH value to 5.5 ± 0.05.
Specification
Appearance: Beige, shiny, low viscous emulsion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
QUICKLY ABSORBING. RICH SKIN FEEL. HYDRATING.
Alternative preservation: Cosphaderm® LA-T, Cosphaderm® AS
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 82.20 | |
| A | Cosphaderm® AS | p-Anisic Acid | Cosphatec GmbH | 0.40 | |
| A | Cosphaderm® LA-T | Levulinic Acid Glycerin Sodium Levulinate Aqua | Cosphatec GmbH | 1.20 | |
| B | Glycerin | Glycerin | - | 4.00 | |
| B | Cosphaderm® X soft | Xanthan Gum | Cosphatec GmbH | 1.00 | |
| B | Cosphaderm® Sodium Hyaluronate low | Sodium Hyaluronate | Cosphatec GmbH | 0.20 | |
| C | Cosphaderm® SF-75H | Hydrogenated Lecithin | Cosphatec GmbH | 3.50 | |
| C | Sunflower Oil | Helianthus Annuus Seed Oil | Gustav Heess GmbH | 5.00 | |
| C | Jojoba Oil | Simmondsia Chinensis Seed Oil | Gustav Heess GmbH | 2.50 |
Manufacturing Process
Phase A: Prepare phase A. Raise the pH to 10 to dissolve Cosphaderm® AS natural and stir until everything is completely dissolved. Afterwards, adjust the pH to 5.5 ± 0.05 by adding Citric Acid.
Phase B: Prepare phase B and add it to phase A while stirring. Stir until everything is completely dissolved.
Phase C: Prepare phase C and add it to phase A/B. Homogenise.
Adjust pH value to 5.5 ± 0.05.
Specification
Appearance: Beige, shiny, low viscous emulsion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
PURIFYING. DETOXIFYING. MATTIFYING.
Alternative preservation: Cosphaderm® LA-T, Cosphaderm® Magnolia Extract 98
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 53.95 | |
| A | Plantacare® 818 UP | Coco Glucoside | BASF SE | 3.00 | |
| A | Cinnamic Acid | Cinnamic Acid | - | 0.30 | |
| A | Cosphaderm® LA-T | Levulinic Acid Glycerin Sodium Levulinate Aqua | Cosphatec GmbH | 1.20 | |
| B | Kaolin | Kaolin | - | 10.00 | |
| B | Glycerin | Glycerin | - | 8.00 | |
| B | Charcoal Powder | Charcoal Powder | - | 2.85 | |
| B | Cosphaderm® X 34 | Xanthan Gum | Cosphatec GmbH | 0.40 | |
| C | PolyAquol® 2W | Polyglyceryl-2 Stearate Glyceryl Stearate Stearyl Alcohol | Innovacos | 2.50 | |
| C | Mango Butter | Mangifera Indica Seed Butter | - | 6.00 | |
| C | Beeswax | Cera alba | Gustav Heess GmbH | 2.50 | |
| C | Lanette® 16 | Cetyl Alcohol | BASF SE | 2.00 | |
| C | Cosphaderm® Feel | Triheptanoin | Cosphatec GmbH | 1.00 | |
| C | Cosphaderm® T-70 NON GMO ECO | Tocopherol Helianthus Annuus Seed Oil | Cosphatec GmbH | 0.10 | |
| D | Cosphaderm® Magnolia Extract 98 | Magnolia Officinalis Bark Extract | Cosphatec GmbH | 0.20 | |
| D | Kaolin | Kaolin | - | 5.00 | |
| D | Lipo® AMS | Prunus Amygdalus Dulcis Seed Meal | Vantage Speciality Ingredients, Inc. | 1.00 |
Manufacturing Process
Phase A: Combine all ingredients of phase A and raise the pH to 11 to dissolve the cinnamic acid completely. Afterwards, adjust the pH to 5.5 ± 0.05 by adding Citric Acid.
Phase B: Add phase B to phase A while stirring. Stir until everything is completely dissolved.
Phase C: Prepare phase C and heat both phases separately to 75 °C.
Add phase C to phase A/B under stirring and homogenise the mixture.
Phase D: Add phase D to the formulation.
Adjust the pH to 5.5 ± 0.05.
Specification
Appearance: Black, creamy paste with small exfoliants
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
REGENERATING. PROTECTING. SOFT TEXTURE.
Alternative preservation: Cosphaderm® LA-T, Cosphaderm® pAS natural, Cosphaderm® Pentiol natural
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 70.60 | |
| A | Cosphaderm® pAS natural | p-Anisic Acid | Cosphatec GmbH | 0.20 | |
| A | Cosphaderm® LA-T | Levulinic Acid Glycerin Sodium Levulinate Aqua | Cosphatec GmbH | 1.40 | |
| B | Cosphaderm® Pentiol natural | Pentylene Glycol | Cosphatec GmbH | 1.50 | |
| B | Glycerin | Glycerin | - | 3.00 | |
| B | Magnesium Sulfate | Magnesium Sulfate | - | 0.70 | |
| C | Imwitor® 600 | Polyglyceryl-3 Polyricinoleate | IOI Oleo GmbH | 3.00 | |
| C | Candellila Wax | Euphorbia Cerifera (Candelilla) Wax | - | 0.60 | |
| C | Lanette® O | Cetearyl Alcohol | BASF SE | 1.00 | |
| C | MCT Oil Typ V Ph. Eur. | Caprylic/Capric Triglyceride | Gustav Heess GmbH | 7.00 | |
| C | Almond Oil | Prunus Amygdalus Dulcis Oil | Gustav Heess GmbH | 5.00 | |
| C | Jojoba Oil | Simmondsia Chinensis Seed Oil | Gustav Heess GmbH | 2.00 | |
| C | Miglyol® Coco 810 | Coco-Caprylate / Caprate | IOI Oleo GmbH | 3.50 | |
| D | Cosphaderm® Tapmix | Lecithin Helianthus Annuus Seed Oil Tocopherol Ascorbyl Palmitate | Cosphatec GmbH | 0.50 |
Manufacturing Process
Phase A: Combine all ingredients of phase A and raise the pH to 10 to dissolve Cosphaderm® pAS natural. Stir until everything is completely dissolved. Afterwards, adjust the pH to 6.0 ±0.2 by adding Citric Acid.
Phase B: Add all ingredients of phase B to phase A and adjust the pH to 5.5 ± 0.05.
Phase C: Combine all ingredients and heat to 80 °C. Then add phase A/B to phase C while homogenising.
Add phase D to the finished formulation and homogenise.
Specification
Appearance: White, slightly beige, high viscous cream
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
QUICKLY ABSORBING. RICH SKIN FEEL. HYDRATING.
Alternative preservation: Cosphaderm® LA-T, Cosphaderm® Sodium pAS natural
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 59.70 | |
| A | Glycerin | Glycerin | - | 4.00 | |
| A | Cosphaderm® X soft | Xanthan Gum | Cosphatec GmbH | 1.00 | |
| A | Cosphaderm® Sodium Hyaluronate low | Sodium Hyaluronate | Cosphatec GmbH | 0.20 | |
| A | Cosphaderm® LA-T | Levulinic Acid Glycerin Sodium Levulinate Aqua | Cosphatec GmbH | 1.20 | |
| B | Cosphaderm® Sodium pAS natural | Sodium Anisate | Cosphatec GmbH | 0.40 | |
| C | Demin. Water | Aqua | - | 22.50 | |
| C | Cosphaderm® SB-75H | Hydrogenated Lecithin | Cosphatec GmbH | 3.50 | |
| C | Sunflower Oil | Helianthus Annuus Seed Oil | Gustav Heess GmbH | 5.00 | |
| C | Jojoba Oil | Simmondsia Chinensis Seed Oil | Gustav Heess GmbH | 2.50 |
Manufacturing Process
Phase A: Prepare phase A and stir until everything is completely dissolved. Adjust pH value to 5.5.
Phase B: Add Cosphaderm® Sodium pAS natural to phase A under stirring.
Phase C: Prepare phase C and homogenise for 5 minutes with high performance disperser (stator/rotor) at max. speed.
Add phase C to phase A+B in small steps under stirring.
Adjust pH value to 5.5 ± 0.05.
Specification
Appearance: Shiny liquid emulsion
pH: 5.5 ± 0.05
Stability: no separation after centrifugation (4000 rpm, 30 min)
CLEANSING. FOAMING. NATURALLY ACTIVE AGAINST DANDRUFF.
Alternative preservation: Cosphaderm® LA-T, Cosphaderm® Sodium pAS natural
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 77.45 | |
| A | Sodium Coco-Sulfate | Sodium Coco Sulfate | - | 10.00 | |
| A | Plantacare® 1200 UP | Lauryl Glucoside | BASF SE | 4.00 | |
| A | Dehyton® K | Cocamidopropyl Betaine | BASF SE | 2.00 | |
| A | SOFTISAN® conditionHAIR | PCA Glyceryl Oleate | IOI Oleo GmbH | 1.00 | |
| A | Cosphagard® SA natural | Salicylic Acid | Cosphatec GmbH | 3.00 | |
| B | Cosphaderm® X 34 | Xanthan Gum | Cosphatec GmbH | 0.50 | |
| C | Cosphaderm® PA ECONAT | Phytic Acid Aqua | Cosphatec GmbH | 0.10 | |
| C | Cosphaderm® Sodium pAS natural | Sodium Anisate | Cosphatec GmbH | 0.20 | |
| C | Cosphaderm® LA-T | Levulinic Acid Glycerin Sodium Levulinate Aqua | Cosphatec GmbH | 1.00 | |
| D | Sodium Chloride | Sodium Chloride | - | 0.75 |
Manufacturing Process
Phase A: Combine all ingredients of phase A. Heat phase A to 40 °C.Raise the pH to 11 to dissolve Cosphagard® SA natural.
Phase B: Add phase B to A and stir until Cosphaderm® X 34 is completely dissolved.
Phase C: Add phase C under stirring.
Phase D: Add phase D to thicken the formulation.
Adjust the pH to 4.5 ± 0.05.
Specification
Appearance: translucent, yellowish gel
pH: 4.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
CLEANSING. FOAMING. NATURALLY ACTIVE AGAINST DANDRUFF.
Alternative preservation: Cosphaderm® LA-T, Cosphaderm® pAS natural
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 77.45 | |
| A | Sodium Coco-Sulfate | Sodium Coco Sulfate | - | 10.00 | |
| A | Plantacare® 1200 UP | Lauryl Glucoside | BASF SE | 4.00 | |
| A | Dehyton® K | Cocamidopropyl Betaine | BASF SE | 2.00 | |
| A | SOFTISAN® conditionHAIR | PCA Glyceryl Oleate | IOI Oleo GmbH | 1.00 | |
| A | Cosphagard® SA natural | Salicylic Acid | Cosphatec GmbH | 3.00 | |
| A | Cosphaderm® pAS natural | p-Anisic Acid | Cosphatec GmbH | 0.20 | |
| B | Cosphaderm® X 34 | Xanthan Gum | Cosphatec GmbH | 0.50 | |
| C | Cosphaderm® PA ECONAT | Phytic Acid Aqua | Cosphatec GmbH | 0.10 | |
| C | Cosphaderm® LA-T | Levulinic Acid Glycerin Sodium Levulinate Aqua | Cosphatec GmbH | 1.00 | |
| D | Sodium Chloride | Sodium Chloride | - | 0.75 |
Manufacturing Process
Phase A: Combine all ingredients of phase A. Heat phase A to 40 °C.Raise the pH to 11 to dissolve Cosphagard® SA natural and Cosphaderm® pAS natural.
Phase B: Add phase B to A and stir until Cosphaderm® X 34 is completely dissolved.
Phase C: Add phase C under stirring.
Phase D: Add phase D to thicken the formulation.
Adjust the pH to 4.5 ± 0.05.
Specification
Appearance: translucent, yellowish gel
pH: 4.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
CLEANSING. FOAMING. NATURALLY ACTIVE AGAINST DANDRUFF.
Alternative preservation: Cosphaderm® LA-T, Cosphaderm® AS
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 77.45 | |
| A | Sodium Coco-Sulfate | Sodium Coco Sulfate | - | 10.00 | |
| A | Plantacare® 1200 UP | Lauryl Glucoside | BASF SE | 4.00 | |
| A | Dehyton® K | Cocamidopropyl Betaine | BASF SE | 2.00 | |
| A | SOFTISAN® conditionHAIR | PCA Glyceryl Oleate | IOI Oleo GmbH | 1.00 | |
| A | Cosphagard® SA natural | Salicylic Acid | Cosphatec GmbH | 3.00 | |
| A | Cosphaderm® AS | p-Anisic Acid | Cosphatec GmbH | 0.20 | |
| B | Cosphaderm® X 34 | Xanthan Gum | Cosphatec GmbH | 0.50 | |
| C | Cosphaderm® PA ECONAT | Phytic Acid Aqua | Cosphatec GmbH | 0.10 | |
| C | Cosphaderm® LA-T | Levulinic Acid Glycerin Sodium Levulinate Aqua | Cosphatec GmbH | 1.00 | |
| D | Sodium Chloride | Sodium Chloride | - | 0.75 |
Manufacturing Process
Phase A: Combine all ingredients of phase A. Heat phase A to 40 °C.Raise the pH to 11 to dissolve Cosphagard® SA natural and Cosphaderm® AS.
Phase B: Add phase B to A and stir until Cosphaderm® X 34 is completely dissolved.
Phase C: Add phase C under stirring.
Phase D: Add phase D to thicken the formulation.
Adjust the pH to 4.5 ± 0.05.
Specification
Appearance: translucent, yellowish gel
pH: 4.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
MILDLY CLEANSING. SENSITIVE. SULFATE-FREE.
Alternative preservation: Cosphaderm® Propanediol natural, Cosphaderm® LA-T
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | ||
| A | Cosphaderm® Propanediol natural | Propanediol | Cosphatec GmbH | 4.35 | |
| A | Glycerin | Glycerin | - | 5.00 | |
| A | Cosphaderm® LA-T | Levulinic Acid Glycerin Sodium Levulinate Aqua | Cosphatec GmbH | 1.00 | |
| A | Cosphaderm® CHA | Caprylhydroxamic Acid | Cosphatec GmbH | 0.15 | |
| B | Cosphaderm® X 34 | Xanthan Gum | Cosphatec GmbH | 0.50 | |
| C | Plantacare® 818 UP | Coco Glucoside | BASF SE | 10.00 | |
| C | Plantacare® 2000 UP | Decyl Glucoside | BASF SE | 4.00 |
Manufacturing Process
Phase A: Mix all ingredients except Cosphaderm® CHA. Add Cosphaderm® CHA and Stir phase A until complete dissolution.
Phase B: Slowly add Cosphaderm® X 34 to phase A while stirring.
Phase C: Mix phase C and add to phase A+B while carefully stirring to prevent foaming.
Adjust the pH to 5.5 ± 0.05.
Specification
Appearance: Transparent viscous gel
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
MILD. NATURALLY ACTIVE AGAINST ACNE. CLEANSING.
Alternative preservation: Cosphaderm® LA-T, Cosphaderm® Sodium pAS natural, Cosphaderm® Pentiol natural
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 71.25 | |
| A | Glycerin | Glycerin | - | 4.00 | |
| A | Cosphaderm® PA ECONAT | Phytic Acid Aqua | Cosphatec GmbH | 0.10 | |
| A | Cosphaderm® Sodium pAS natural | Sodium Anisate | Cosphatec GmbH | 0.20 | |
| A | Cosphaderm® LA-T | Levulinic Acid Glycerin Sodium Levulinate Aqua | Cosphatec GmbH | 1.00 | |
| A | Cosphagard® SA natural | Salicylic Acid | Cosphatec GmbH | 1.00 | |
| A | Cosphaderm® Pentiol natural | Pentylene Glycol | Cosphatec GmbH | 3.00 | |
| B | Cosphaderm® X 34 | Xanthan Gum | Cosphatec GmbH | 1.00 | |
| C | Perlastan® SC | Disodium/Sodium Cocoyl Glutamate | Schill + Seilacher Struktol GmbH | 10.30 | |
| C | Cosphaderm® Magnolia Extract 98 | Magnolia Officinalis Bark Extract | Cosphatec GmbH | 0.05 | |
| C | Plantacare® 1200 UP | Lauryl Glucoside | BASF SE | 6.60 | |
| D | WorléeBeads | Hydrogenated Jojoba Oil | Worlée-Chemie GmbH | 1.50 |
Manufacturing Process
Phase A: Combine all ingredients of phase A. Raise the pH to 11 to dissolve Cosphagard® SA natural. When everything is dissolved, lower the pH back to 5-6 again.
Phase B: Add Cosphaderm® X 34 to phase A and stir until everything is completely dissolved.
Phase C: Combine all ingredients of phase C separately. Add then phase C to phase A+B.
Phase D: Add phase D to the finished formulation.
Adjust the pH to 5.5 ± 0.05.
Specification
Appearance: Translucent gel with small peeling beads
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
NATURALLY MILD. SOOTHING. MOISTURISING.
Alternative preservation: Cosphaderm® LA-T, Cosphaderm® GMCY
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 80.60 | |
| A | Glycerin | Glycerin | - | 3.00 | |
| A | Cinnamic Acid | Cinnamic Acid | - | 0.20 | |
| A | Cosphaderm® LA-T | Levulinic Acid Glycerin Sodium Levulinate Aqua | Cosphatec GmbH | 1.00 | |
| B | Cosphaderm® X 34 | Xanthan Gum | Cosphatec GmbH | 0.30 | |
| B | Cosphaderm® Sodium Hyaluronate high | Sodium Hyaluronate | Cosphatec GmbH | 0.20 | |
| C | PolyAquol®-2W | Polyglyceryl-2 Stearate Glyceryl Stearate Stearyl Alcohol | Innovacos | 2.50 | |
| C | Lanette® 16 | Cetyl Alcohol | BASF SE | 1.00 | |
| C | Cosphaderm® SF-75H | Hydrogenated Lecithin | Cosphatec GmbH | 2.00 | |
| C | Beeswax white | Cera alba | Gustav Heess GmbH | 2.50 | |
| C | Shea Butter refined | Butyrospermum Parkii Butter | Gustav Heess GmbH | 3.00 | |
| C | Argan Oil | Argania Spinosa Kernel Oil | Gustav Heess GmbH | 2.00 | |
| C | Cosphaderm® Feel | Triheptanoin | Cosphatec GmbH | 1.00 | |
| C | Cosphaderm® T-70 NON GMO ECO CC | Tocopherol Helianthus Annuus Seed Oil | Cosphatec GmbH | 0.20 | |
| C | Cosphaderm® GMCY | Glyceryl Caprylate | Cosphatec GmbH | 0.50 |
Manufacturing Process
Phase A: Combine all ingredients of phase A and raise the pH to 11 under stirring to dissolve cinnamic acid. When everything is dissolved, lower the pH back to 6 again.
Add phase B to A and stir until everything is dissolved. Heat phase A/B to 75 °C.
Phase C: Combine all ingredients and heat to 80 °C. Add then phase C to phase A/B under strong stirring and homogenise.
Adjust the pH to 5.5 ± 0.05.
Specification
Appearance: White viscous emulsion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
Newsletter
Register now for our e-mail newsletter and receive the latest information on our products.
Product-relevant information needs to be added here.
