FORMULATIONS

MODERN COSMETICS FOR AMBITIOUS FORMULATORS

We understand the requirements and issues of cosmetics formulators. That's why we spend a lot of time on application technology in our in-house laboratory. Here we analyse the incorporation and effect of raw materials in order to offer our customers the best possible support and suitable recommendations.

We have provided a selected set of formulations for download here - enjoy!

FaceCare

MOISTURISING DAYCREAM 100.1.1.1

RICH SKIN FEEL. QUICKLY ABSORBING. HYDRATING.

Alternative preservation: Cosphaderm® Dicapo

PHASE	INGREDIENT	COSMOS	INCI	SUPPLIER	%
A	Demin. Water		Aqua	-	84.50
A	Glycerin		Glycerin	-	3.00
A	Cosphaderm® PA ECONAT	✓	Phytic Acid Aqua	Cosphatec GmbH	0.10
B	Cosphaderm® X 34	✓	Xanthan Gum	Cosphatec GmbH	0.20
B	Aristoflex® AVC		Ammonium Acryloyldimethyltaurate/ VP Copolymer	Clariant AG	1.00
C	Cosphaderm® E NGM natural	✓	Lysolecithin	Cosphatec GmbH	1.50
C	Cegesoft® SH		Shorea Stenoptera Seed Butter	BASF SE	2.50
C	Sunflower Oil		Helianthus Annuus Seed Oil	Gustav Heess GmbH	2.00
C	Jojoba Oil		Simmondsia Chinensis Seed Oil	Gustav Heess GmbH	2.00
C	Softisan® 154		Hydrogenated Palm Oil	IOI Oleo GmbH	1.00
C	Cosphaderm® AP	✓	Ascorbyl Palmitate	Cosphatec GmbH	0.20
C	Cosphaderm® T-70 NON GMO ECO	✓	Tocopherol Helianthus Annuus Seed Oil	Cosphatec GmbH	0.30
C	Cosphaderm® Feel	✓	Triheptanoin	Cosphatec GmbH	1.00
D	Cosphaderm® Dicapo		Caprylyl Glycol Glyceryl Caprylate Dipropylene Glycol	Cosphatec GmbH	0.70

Manufacturing Process

Phase A: Mix all ingredients together.
Phase B: Slowly add Cosphaderm® X 34 and Aristoflex® AVC under stirring to phase A. Continue stirring until complete dissolution. Then heat to 80 °C.
Phase C: Mix all ingredients and heat to 80 °C. Add phase C to phase A+B and homogenise.
Phase D: Add Cosphaderm® Dicapo below 40 °C under stirring.
Adjust the pH to 5.5 ± 0.05.

Specification

Appearance: Light beige, shiny, viscous emulsion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

Bodycare

RICH & SOFT HANDCREAM 200.4.1.2

ALL NATURAL INGREDIENTS

REGENERATING. SOFT SKIN FEEL. MOISTURISING.

Alternative preservation: Cosphaderm® MultiMEG

PHASE	INGREDIENT	COSMOS	INCI	SUPPLIER	%
A	Demin. Water		Aqua	-	76.55
A	Glycerin		Glycerin	-	2.00
A	Cosphaderm® X 34	✓	Xanthan Gum	Cosphatec GmbH	0.25
B	Lamecreme		Glyceryl Stearate Glyceryl Stearate Citrate	-	2.50
B	Montanov™ 68		Cetearyl Alcohol Cetearyl Glucoside	SEPPIC, S.A.	2.00
B	Tegomuls		Hydrogenated Palm Glyceride	-	0.50
B	Lanette® 16		Cetyl Alcohol	BASF SE	1.00
B	Beeswax		Cera alba	Gustav Heess GmbH	0.50
B	Carnauba Wax		Copernicia Cerifera Cera	Gustav Heess GmbH	1.00
B	Shea Butter refined		Butyrospermum Parkii Butter	Gustav Heess GmbH	3.00
B	Sunflower Oil		Helianthus Annuus Seed Oil	Gustav Heess GmbH	3.00
B	Peach Kernel Oil		Prunus Persica Kernel Oil	Gustav Heess GmbH	1.50
B	Jojoba Oil		Simmondsia Chinensis Seed Oil	Gustav Heess GmbH	2.50
B	Cosphaderm® T-70 NON GMO		Tocopherol Helianthus Annuus Seed Oil	Cosphatec GmbH	0.30
B	Cosphaderm® AP	✓	Ascorbyl Palmitate	Cosphatec GmbH	0.20
B	Cosphaderm® Feel	✓	Triheptanoin	Cosphatec GmbH	2.00
C	Cosphaderm® MultiMEG	✓	Glyceryl Caprylate Pentylene Glycol Magnolia Officinalis Bark Extract	Cosphatec GmbH	1.20

Manufacturing Process

Phase A: Mix all ingredients together. Slowly add Cosphaderm® X 34 while stirring. Then heat to 80 °C.
Phase B: Combine all ingredients and heat to 80 °C.
Add phase B to phase A and homogenise.
Phase C: Add Cosphaderm® MultiMEG below 40 °C while stirring.
Adjust the pH to 5.5 ± 0.05.