FORMULATIONS

DES COSMÉTIQUES MODERNES POUR DES FORMULATEURS AMBITIEUX

Chez Cosphatec, nous comprenons les enjeux et les défis auxquels sont confrontés les formulateurs de produits cosmétiques. C'est pourquoi notre laboratoire d'application consacre une part importante de son activité à l'étude de l'incorporation et des performances de nos matières premières. Cette expertise nous permet d'accompagner nos clients avec des conseils techniques et des recommandations adaptées à leurs formulations.

Nous avons sélectionné une série de formulations que vous pouvez télécharger ci-dessous. Nous vous souhaitons une excellente découverte !

FaceCare

MOISTURISING DAYCREAM 100.1.1.1

RICH SKIN FEEL. QUICKLY ABSORBING. HYDRATING.

Alternative preservation: Cosphaderm® Dicapo

PHASE	INGREDIENT	COSMOS	INCI	SUPPLIER	%
A	Demin. Water		Aqua	-	84.50
A	Glycerin		Glycerin	-	3.00
A	Cosphaderm® PA ECONAT	✓	Phytic Acid Aqua	Cosphatec GmbH	0.10
B	Cosphaderm® X 34	✓	Xanthan Gum	Cosphatec GmbH	0.20
B	Aristoflex® AVC		Ammonium Acryloyldimethyltaurate/ VP Copolymer	Clariant AG	1.00
C	Cosphaderm® E NGM natural	✓	Lysolecithin	Cosphatec GmbH	1.50
C	Cegesoft® SH		Shorea Stenoptera Seed Butter	BASF SE	2.50
C	Sunflower Oil		Helianthus Annuus Seed Oil	Gustav Heess GmbH	2.00
C	Jojoba Oil		Simmondsia Chinensis Seed Oil	Gustav Heess GmbH	2.00
C	Softisan® 154		Hydrogenated Palm Oil	IOI Oleo GmbH	1.00
C	Cosphaderm® AP	✓	Ascorbyl Palmitate	Cosphatec GmbH	0.20
C	Cosphaderm® T-70 NON GMO ECO	✓	Tocopherol Helianthus Annuus Seed Oil	Cosphatec GmbH	0.30
C	Cosphaderm® Feel	✓	Triheptanoin	Cosphatec GmbH	1.00
D	Cosphaderm® Dicapo		Caprylyl Glycol Glyceryl Caprylate Dipropylene Glycol	Cosphatec GmbH	0.70

Manufacturing Process

Phase A: Mix all ingredients together.
Phase B: Slowly add Cosphaderm® X 34 and Aristoflex® AVC under stirring to phase A. Continue stirring until complete dissolution. Then heat to 80 °C.
Phase C: Mix all ingredients and heat to 80 °C. Add phase C to phase A+B and homogenise.
Phase D: Add Cosphaderm® Dicapo below 40 °C under stirring.
Adjust the pH to 5.5 ± 0.05.

Specification

Appearance: Light beige, shiny, viscous emulsion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

Bodycare

RICH & SOFT HANDCREAM 200.4.1.2

ALL NATURAL INGREDIENTS

REGENERATING. SOFT SKIN FEEL. MOISTURISING.

Alternative preservation: Cosphaderm® MultiMEG

PHASE	INGREDIENT	COSMOS	INCI	SUPPLIER	%
A	Demin. Water		Aqua	-	76.55
A	Glycerin		Glycerin	-	2.00
A	Cosphaderm® X 34	✓	Xanthan Gum	Cosphatec GmbH	0.25
B	Lamecreme		Glyceryl Stearate Glyceryl Stearate Citrate	-	2.50
B	Montanov™ 68		Cetearyl Alcohol Cetearyl Glucoside	SEPPIC, S.A.	2.00
B	Tegomuls		Hydrogenated Palm Glyceride	-	0.50
B	Lanette® 16		Cetyl Alcohol	BASF SE	1.00
B	Beeswax		Cera alba	Gustav Heess GmbH	0.50
B	Carnauba Wax		Copernicia Cerifera Cera	Gustav Heess GmbH	1.00
B	Shea Butter refined		Butyrospermum Parkii Butter	Gustav Heess GmbH	3.00
B	Sunflower Oil		Helianthus Annuus Seed Oil	Gustav Heess GmbH	3.00
B	Peach Kernel Oil		Prunus Persica Kernel Oil	Gustav Heess GmbH	1.50
B	Jojoba Oil		Simmondsia Chinensis Seed Oil	Gustav Heess GmbH	2.50
B	Cosphaderm® T-70 NON GMO		Tocopherol Helianthus Annuus Seed Oil	Cosphatec GmbH	0.30
B	Cosphaderm® AP	✓	Ascorbyl Palmitate	Cosphatec GmbH	0.20
B	Cosphaderm® Feel	✓	Triheptanoin	Cosphatec GmbH	2.00
C	Cosphaderm® MultiMEG	✓	Glyceryl Caprylate Pentylene Glycol Magnolia Officinalis Bark Extract	Cosphatec GmbH	1.20

Manufacturing Process

Phase A: Mix all ingredients together. Slowly add Cosphaderm® X 34 while stirring. Then heat to 80 °C.
Phase B: Combine all ingredients and heat to 80 °C.
Add phase B to phase A and homogenise.
Phase C: Add Cosphaderm® MultiMEG below 40 °C while stirring.
Adjust the pH to 5.5 ± 0.05.