Wir verstehen die Anforderungen und Fragestellungen von Kosmetik-Entwicklern. Darum verbringen wir viel Zeit mit Anwendungstechnik in unserem In-House Labor. Hier untersuchen wir die Einarbeitung und Wirkung von Rohstoffen, um unseren Kunden den bestmöglichen Support und passende Empfehlungen bieten zu können.
Ein ausgewähltes Set an Formulierungen haben wir hier zum Download bereitgestellt – viel Spaß damit!
COOLING. STRESS-RELIEVING. FAST ABSORBING.
Alternative preservation: Cosphaderm® LA-T, Cosphaderm® Pentiol GL
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 78.40 | |
| A | Glycerin | Glycerin | - | 5.00 | |
| A | Cinnamic Acid | Cinnamic Acid | - | 0.20 | |
| A | Cosphaderm® LA-T | Levulinic Acid Glycerin Sodium Levulinate Aqua | Cosphatec GmbH | 1.00 | |
| B | Cosphaderm® X soft | Xanthan Gum | Cosphatec GmbH | 0.50 | |
| B | Cosphaderm® Sodium Hyaluronate | Sodium Hyaluronate | Cosphatec GmbH | 0.20 | |
| B | Panthenol | Panthenol Aqua | - | 1.00 | |
| B | Cosphaderm® Pentiol GL | Pentylene Glycol | Cosphatec GmbH | 3.00 | |
| B | Witch Hazel Water | Hamamelis Virginiana Leaf Water | - | 10.00 | |
| B | Ronacare® Allantoin | Allantoin | SUSONITY | 0.20 | |
| B | Aloe Vera Powder | Aloe Barbadensis Leaf Juice Powder | - | 0.50 |
Manufacturing Process
Phase A: Combine all ingredients of phase A and raise the pH to 11 to dissolve cinnamic acid. When everything is dissolved, lower the pH back to 6 again.
Phase B: Add all ingredients of phase B to phase A and stir until a slightly viscous gel is formed.
Adjust pH to 5.5 ± 0.05.
Specification
Appearance: Yellowish, transparent, slightly viscous gel
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
HYDRATING. REFRESHING. SKIN REFINING.
Alternative preservation: Cosphaderm® Pentiol GL, Cosphaderm® Hexiol
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 84.00 | |
| A | Glycerin | Glycerin | - | 5.00 | |
| A | Cosphaderm® Pentiol GL | Pentylene Glycol | Cosphatec GmbH | 3.00 | |
| A | Cosphaderm® Hexiol | 1,2-Hexanediol | Cosphatec GmbH | 1.50 | |
| A | RonaCare® Nicotinamide | Niacinamide | SUSONITY | 4.00 | |
| A | Panthenol | Panthenol Aqua | - | 2.00 | |
| A | Cosphaderm® Sodium Hyaluronate low | Sodium Hyaluronate | Cosphatec GmbH | 0.10 | |
| B | Carbopol® Ultrez-21 | Acrylates/C10-30 Alkyl Acrylate Crosspolymer | Lubrizol | 0.40 |
Manufacturing Process
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Add phase B to phase A under stirring.
Adjust the pH to 6.0 ± 0.05 to thicken the formulation.
Specification
Appearance: Transparent, clear, viscous gel
pH: 6.0 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
HYDRATING. RELAXING. CALMING.
Alternative preservation: Cosphaderm® Hexiol, Cosphaderm® Pentiol GL, Cosphaderm® Propanediol natural
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 82.80 | |
| A | Cosphaderm® Hexiol | 1,2-Hexanediol | Cosphatec GmbH | 1.00 | |
| A | Cosphaderm® Pentiol GL | Pentylene Glycol | Cosphatec GmbH | 5.00 | |
| B | Glycerin | Glycerin | - | 5.00 | |
| B | Cosphaderm® Propanediol natural | Propanediol | Cosphatec GmbH | 5.00 | |
| B | Cosphaderm® X 34 | Xanthan Gum | Cosphatec GmbH | 0.50 | |
| B | Cosphaderm® KG | Amorphophallus Konjac Root Extract | Cosphatec GmbH | 0.50 | |
| B | Cosphaderm® Sodium Hyaluronate low | Sodium Hyaluronate | Cosphatec GmbH | 0.20 |
Manufacturing Process
Phase A: Prepare phase A.
Phase B: Pre-disperse phase B and add to the water phase while stirring. Stir until everything is completely dissolved.
Adjust the pH to 5.5 – 6.0 ± 0.05.
Heat the mixture to its boiling point and keep this temperature for 2 – 3 minutes.
Quickly pour the hot mixture into a casting mould and let it cool.
Specification
Appearance: Transparent or coloured, elastic jelly patch
pH: 5.5 – 6.0 ± 0.05
Stability: Stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
GENTLE CLEANSING. MILD. VEGAN.
Alternative preservation: Cosphaderm® Hexiol, Cosphaderm® Pentiol GL, Cosphaderm® Propanediol natural
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 74.00 | |
| A | Cosphaderm® Hexiol | 1,2-Hexanediol | Cosphatec GmbH | 2.50 | |
| A | Cosphaderm® Pentiol GL | Pentylene Glycol | Cosphatec GmbH | 2.50 | |
| A | Cosphaderm® Propanediol natural | Propanediol | Cosphatec GmbH | 4.00 | |
| A | Panthenol | Panthenol Aqua | - | 1.00 | |
| B | Cosphaderm® X 34 | Xanthan Gum | Cosphatec GmbH | 1.00 | |
| C | Plantacare® 818 UP | Coco Glucoside | BASF SE | 5.00 | |
| C | Plantacare® 2000 UP | Decyl Glucoside | BASF SE | 10.00 |
Manufacturing Process
Phase A: Combine all ingredients of phase A.
Phase B: Add phase B to phase A while stirring and stir until everything is completely dissolved.
Phase C: Prepare phase C and add to phase A+B under slow stirring to prevent foaming.
Adjust pH to 5.5 ± 0.05.
Specification
Appearance: Transparent, viscous gel
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
SOOTHING. MAKE-UP REMOVING. CLEANSING.
Alternative preservation: Cosphaderm® Hexiol, Cosphaderm® Pentiol GL
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 70.35 | |
| A | Glycerin | Glycerin | - | 5.00 | |
| A | Cosphaderm® PA ECONAT | Phytic Acid Aqua | Cosphatec GmbH | 0.10 | |
| A | Plantacare® 2000 UP | Decyl Glucoside | BASF SE | 0.30 | |
| B | Cosphaderm® Hexiol | 1,2-Hexanediol | Cosphatec GmbH | 1.00 | |
| B | Cosphaderm® CHA | Caprylhydroxamic Acid | Cosphatec GmbH | 0.15 | |
| B | Cosphaderm® Pentiol GL | Pentylene Glycol | Cosphatec GmbH | 3.00 | |
| C | Cosphaderm® Feel | Triheptanoin | Cosphatec GmbH | 20.00 | |
| C | Cosphaderm® T-70 NON GMO | Tocopherol Helianthus Annuus Seed Oil | Cosphatec GmbH | 0.10 | |
| C | Oil-soluble Colour | - |
Manufacturing Process
Phase A: Mix all ingredients of phase A under slow stirring.
Phase B: Mix all ingredients of phase B until everything is completely dissolved and add B to phase A.
Adjust the pH of phase A+B to 5.5 ± 0.05.
Phase C: Mix all ingredients of phase C and add the mixture to phase A+B without stirring.
Specification
Appearance: Two-phase system with coloured oil phase on top of transparent water phase
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
Newsletter
Jetzt für unseren E-Mail-Newsletter anmelden und aktuelle Informationen zu unseren Produkten erhalten.
Bitte alle *Pflichtfelder ausfüllen
