Wir verstehen die Anforderungen und Fragestellungen von Kosmetik-Entwicklern. Darum verbringen wir viel Zeit mit Anwendungstechnik in unserem In-House Labor. Hier untersuchen wir die Einarbeitung und Wirkung von Rohstoffen, um unseren Kunden den bestmöglichen Support und passende Empfehlungen bieten zu können.
Ein ausgewähltes Set an Formulierungen haben wir hier zum Download bereitgestellt – viel Spaß damit!
EXFOLIATING. HYDRATING. SOOTHING.
Alternative preservation: Cosphaderm® Pentiol natural, Cosphaderm® Zinc Lactate natural
| PHASE | Ingredient | Cosmos | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water |
Aqua
|
-
|
85.70 | |
| A | Cosphagard® SA natural |
Salicylic Acid
|
Cosphatec GmbH
|
2.00 | |
| B | Glycerin |
Glycerin
|
CREMER OLEO GmbH & Co. KG
|
3.00 | |
| B | D-Panthenol 75 % |
PanthenolAqua
|
-
|
0.50 | |
| B | Cosphaderm® Sodium Hyaluronate |
Sodium Hyaluronate
|
Cosphatec GmbH
|
0.20 | |
| B | Cosphaderm® X 34 |
Xanthan Gum
|
Cosphatec GmbH
|
0.20 | |
| B | Caffeine Powder |
Caffeine
|
-
|
1.00 | |
| B | Betaine |
Betaine
|
Clariant AG
|
2.00 | |
| B | Cosphaderm® Pentiol natural |
Pentylene Glycol
|
Cosphatec GmbH
|
5.00 | |
| B | Cosphaderm® Zinc Lactate natural |
Zinc Lactate
|
Cosphatec GmbH
|
0.40 |
MANUFACTURING PROCESS
Phase A: Combine the ingredients of phase A. Raise the pH to 11 to dissolve Cosphagard® SA natural. When everything is dissolved, lower the pH back to 4-5 again.
Phase B: Add all ingredients from phase B one after another.
Adjust the pH to 4.0 ± 0.05.
SPECIFICATION
Appearance: Clear solution
pH: 4.0 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)
CLEANSING. FOAMING. NATURALLY ACTIVE AGAINST DANDRUFF.
Alternative preservation: Cosphaderm® LA-T, Cosphaderm® Sodium pAS natural
| PHASE | Ingredient | Cosmos | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Sodium Coco Sulfat 30 % |
AquaSodium Coco Sulfate
|
-
|
30.00 | |
| A | Plantacare® 1200 UP |
Lauryl Glucoside
|
BASF SE
|
4.00 | |
| A | Dehyton® K |
Cocamidopropyl Betaine
|
BASF SE
|
2.00 | |
| A | SOFTISAN® conditionHAIR |
PCA Glyceryl Oleate
|
IOI Oleo GmbH
|
1.00 | |
| A | Cosphagard® SA natural |
Salicylic Acid
|
Cosphatec GmbH
|
3.00 | |
| A | Sodium Hydroxide Solution (10 %) |
AquaSodium Hydroxide
|
-
|
q.s. | |
| B | Demin. Water |
Aqua
|
-
|
ad 100 | |
| B | Cosphaderm® X 34 |
Xanthan Gum
|
Cosphatec GmbH
|
0.50 | |
| B | Cosphaderm® PA ECONAT |
Phytic AcidAqua
|
Cosphatec GmbH
|
0.10 | |
| B | Cosphaderm® Sodium pAS natural |
Sodium Anisate
|
Cosphatec GmbH
|
0.20 | |
| B | Cosphaderm® LA-T |
Levulinic AcidGlycerinSodium LevulinateAqua
|
Cosphatec GmbH
|
1.00 | |
| C | NaCl-Solution 25 % |
AquaSodium Chloride
|
-
|
3.00 | |
| C | Citric Acid Solution (10 %) |
AquaCitric Acid
|
-
|
q.s. |
Manufacturing Process
Phase A: Combine all ingredients of phase A. Raise the pH to 11 to dissolve Cosphagard® SA natural.
Heat phase A to 70 °C.
Phase B: Combine all ingredients and stir until Cosphaderm® X 34 is completely dissolved.
Heat phase B to 70 °C.
Add phase B to phase A under very soft stirring.
Phase C: Add phase C below 40 °C to the finished formulation. Adjust the pH to 4.5 ± 0.05.
The shampoo will thicken within 24 hours.
Specification
Appearance: Clear to yellowish liquid
pH: 4.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)
CLEANSING. FOAMING. NATURALLY ACTIVE AGAINST DANDRUFF.
Alternative preservation: Cosphaderm® LA-T, Cosphaderm® pAS natural
| PHASE | Ingredient | Cosmos | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Sodium Coco Sulfat 30 % |
AquaSodium Coco Sulfate
|
-
|
30.00 | |
| A | Plantacare® 1200 UP |
Lauryl Glucoside
|
BASF SE
|
4.00 | |
| A | Dehyton® K |
Cocamidopropyl Betaine
|
BASF SE
|
2.00 | |
| A | SOFTISAN® conditionHAIR |
PCA Glyceryl Oleate
|
IOI Oleo GmbH
|
1.00 | |
| A | Cosphagard® SA natural |
Salicylic Acid
|
Cosphatec GmbH
|
3.00 | |
| A | Cosphaderm® pAS natural |
p-Anisic Acid
|
Cosphatec GmbH
|
0.20 | |
| A | Sodium Hydroxide Solution (10 %) |
AquaSodium Hydroxide
|
-
|
q.s. | |
| B | Demin. Water |
Aqua
|
-
|
ad 100 | |
| B | Cosphaderm® X 34 |
Xanthan Gum
|
Cosphatec GmbH
|
0.50 | |
| B | Cosphaderm® PA ECONAT |
Phytic AcidAqua
|
Cosphatec GmbH
|
0.10 | |
| B | Cosphaderm® LA-T |
Levulinic AcidGlycerinSodium LevulinateAqua
|
Cosphatec GmbH
|
1.00 | |
| C | NaCl-Solution 25 % |
AquaSodium Chloride
|
-
|
3.00 | |
| C | Citric Acid Solution (10 %) |
AquaCitric Acid
|
-
|
q.s. |
Manufacturing Process
Phase A: Combine all ingredients of phase A. Raise the pH to 11 to dissolve Cosphagard® SA natural and Cosphaderm® pAS natural.
Heat phase A to 70 °C.
Phase B: Combine all ingredients and stir until Cosphaderm® X 34 is completely dissolved.
Heat phase B to 70 °C.
Add phase B to phase A under very soft stirring.
Phase C: Add phase C below 40 °C to the finished formulation. Adjust the pH to 4.5 ± 0.05.
The shampoo will thicken within 24 hours.
Specification
Appearance: Clear to yellowish liquid
pH: 4.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)
CLEANSING. FOAMING. NATURALLY ACTIVE AGAINST DANDRUFF.
Alternative preservation: Cosphaderm® LA-T, Cosphaderm® AS
| PHASE | Ingredient | Cosmos | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Sodium Coco Sulfat 30 % |
AquaSodium Coco Sulfate
|
-
|
30.00 | |
| A | Plantacare® 1200 UP |
Lauryl Glucoside
|
BASF SE
|
4.00 | |
| A | Dehyton® K |
Cocamidopropyl Betaine
|
BASF SE
|
2.00 | |
| A | SOFTISAN® conditionHAIR |
PCA Glyceryl Oleate
|
IOI Oleo GmbH
|
1.00 | |
| A | Cosphagard® SA natural |
Salicylic Acid
|
Cosphatec GmbH
|
3.00 | |
| A | Cosphaderm® AS |
p-Anisic Acid
|
Cosphatec GmbH
|
0.20 | |
| A | Sodium Hydroxide Solution (10 %) |
AquaSodium Hydroxide
|
-
|
q.s. | |
| B | Demin. Water |
Aqua
|
-
|
ad 100 | |
| B | Cosphaderm® X 34 |
Xanthan Gum
|
Cosphatec GmbH
|
0.50 | |
| B | Cosphaderm® PA ECONAT |
Phytic AcidAqua
|
Cosphatec GmbH
|
0.10 | |
| B | Cosphaderm® LA-T |
Levulinic AcidGlycerinSodium LevulinateAqua
|
Cosphatec GmbH
|
1.00 | |
| C | NaCl-Solution 25 % |
AquaSodium Chloride
|
-
|
3.00 | |
| C | Citric Acid Solution (10 %) |
AquaCitric Acid
|
-
|
q.s. |
Manufacturing Process
Phase A: Combine all ingredients of phase A. Raise the pH to 11 to dissolve Cosphagard® SA natural and Cosphaderm® AS.
Heat phase A to 70 °C.
Phase B: Combine all ingredients and stir until Cosphaderm® X 34 is completely dissolved.
Heat phase B to 70 °C.
Add phase B to phase A under very soft stirring.
Phase C: Add phase C below 40 °C to the finished formulation. Adjust the pH to 4.5 ± 0.05.
The shampoo will thicken within 24 hours.
Specification
Appearance: Clear to yellowish liquid
pH: 4.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)
ANTI INFLAMMATORY. CLARIFYING. PORE SIZE REDUCING.
Alternative preservation: Cosphaderm® Zinc Lactate natural, Cosphaderm® Propanediol natural
| PHASE | Ingredient | Cosmos | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water |
Aqua
|
-
|
88.20 | |
| A | Cosphaderm® Propanediol natural |
Propanediol
|
Cosphatec GmbH
|
5.00 | |
| A | Cosphagard® SA natural |
Salicylic Acid
|
Cosphatec GmbH
|
2.00 | |
| B | Glycerin |
Glycerin
|
CREMER OLEO GmbH & Co. KG
|
2.50 | |
| B | Cosphaderm® X soft |
Xanthan Gum
|
Cosphatec GmbH
|
0.70 | |
| B | Cosphaderm® Sodium Hyaluronate high |
Sodium Hyaluronate
|
Cosphatec GmbH
|
0.10 | |
| C | Cosphaderm® Zinc Lactate natural |
Zinc Lactate
|
Cosphatec GmbH
|
1.00 | |
| C | Hamamelis Virginiana Leaf Water |
Hamamelis Virginiana Leaf Water
|
-
|
0.50 |
Manufacturing Process
Phase A: Combine all ingredients of phase A. Raise the pH to 11 to dissolve Cosphagard® SA natural. When everything is dissolved, lower the pH back to 4-5 again.
Phase B: Combine Glycerin, Cosphaderm® X 34 and Cosphaderm® Sodium Hyaluronate high and stir until the powder is wetted. Then add it to phase A.
Phase C: Add phase C under stirring.
Adjust the pH to 4.0 ± 0.05.
Specification
Appearance: Transparent, clear gel
pH: 4.0 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)
EXFOLIATING. HYDRATING. SOOTHING.
Alternative preservation: Cosphaderm® Absolute
| PHASE | Ingredient | Cosmos | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water |
Aqua
|
-
|
76.00 | |
| A | Cosphagard® SA natural |
Salicylic Acid
|
Cosphatec GmbH
|
2.00 | |
| B | Glycerin |
Glycerin
|
CREMER OLEO GmbH & Co. KG
|
2.00 | |
| B | Cosphaderm® Absolute |
PropanediolSodium LactateBetaineAqua
|
Cosphatec GmbH
|
20.00 |
MANUFACTURING PROCESS
Phase A: Combine the ingredients of phase A. Raise the pH to 11 to dissolve Cosphagard® SA natural. When everything is dissolved, lower the pH back to 4-5 again.
Phase B: Add phase B to A while stirring.
Adjust the pH to 4.0 ± 0.05.
SPECIFICATION
Appearance: Clear solution
pH: 4.0 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)
EXFOLIATING. PORE SIZE REDUCING. SOOTHING.
Alternative preservation: Cosphaderm® Pentiol natural, Cosphaderm® Propanediol natural
| PHASE | Ingredient | Cosmos | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water |
Aqua
|
-
|
90.90 | |
| A | Cosphaderm® Propanediol natural |
Propanediol
|
Cosphatec GmbH
|
4.00 | |
| A | Cosphaderm® Pentiol natural |
Pentylene Glycol
|
Cosphatec GmbH
|
3.00 | |
| A | Cosphagard® SA natural |
Salicylic Acid
|
Cosphatec GmbH
|
2.00 | |
| B | Cosphaderm® PA ECONAT |
Phytic AcidAqua
|
Cosphatec GmbH
|
0.10 |
Manufacturing Process
Phase A: Combine all ingredients of phase A. Raise the pH to 11 to dissolve Cosphagard® SA natural
completely.
Phase B: Add phase B and lower the pH to 4.0 ± 0.05.
Specification
Appearance: Clear solution
pH: 4.0 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)
MILD. NATURALLY ACTIVE AGAINST ACNE. CLEANSING.
Alternative preservation: Cosphaderm® LA-T, Cosphaderm® Sodium pAS natural, Cosphaderm® Pentiol natural
| PHASE | Ingredient | Cosmos | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water |
Aqua
|
-
|
71.25 | |
| A | Glycerin |
Glycerin
|
CREMER OLEO GmbH & Co. KG
|
4.00 | |
| A | Cosphaderm® PA ECONAT |
Phytic AcidAqua
|
Cosphatec GmbH
|
0.10 | |
| A | Cosphaderm® Sodium pAS natural |
Sodium Anisate
|
Cosphatec GmbH
|
0.20 | |
| A | Cosphaderm® LA-T |
Levulinic AcidGlycerinSodium LevulinateAqua
|
Cosphatec GmbH
|
1.00 | |
| A | Cosphagard® SA natural |
Salicylic Acid
|
Cosphatec GmbH
|
1.00 | |
| A | Cosphaderm® Pentiol natural |
Pentylene Glycol
|
Cosphatec GmbH
|
3.00 | |
| B | Cosphaderm® X 34 |
Xanthan Gum
|
Cosphatec GmbH
|
1.00 | |
| C | Perlastan® SC |
Disodium/Sodium Cocoyl Glutamate
|
Schill + Seilacher Struktol GmbH
|
10.30 | |
| C | Cosphaderm® Magnolia Extract 98 |
Magnolia Officinalis Bark Extract
|
Cosphatec GmbH
|
0.05 | |
| C | Plantacare® 1200 UP |
Lauryl Glucoside
|
BASF SE
|
6.60 | |
| D | WorléeBeads |
Hydrogenated Jojoba Oil
|
Worlée-Chemie GmbH
|
1.50 |
Manufacturing Process
Phase A: Combine all ingredients of phase A. Raise the pH to 11 to dissolve Cosphagard® SA natural. When everything is dissolved, lower the pH back to 5-6 again.
Phase B: Add Cosphaderm® X 34 to phase A and stir until everything is completely dissolved.
Phase C: Combine all ingredients of phase C separately. Add then phase C to phase A+B.
Phase D: Add the last phase to the finished formulation. Adjust the pH to 5.5 ± 0.05.
Specification
Appearance: Translucent gel with small peeling beads
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)