close-white
job flower 3

FORMULATIONS

DES COSMÉTIQUES MODERNES POUR DES FORMULATEURS AMBITIEUX

Chez Cosphatec, nous comprenons les enjeux et les défis auxquels sont confrontés les formulateurs de produits cosmétiques. C'est pourquoi notre laboratoire d'application consacre une part importante de son activité à l'étude de l'incorporation et des performances de nos matières premières. Cette expertise nous permet d'accompagner nos clients avec des conseils techniques et des recommandations adaptées à leurs formulations.

Nous avons sélectionné une série de formulations que vous pouvez télécharger ci-dessous. Nous vous souhaitons une excellente découverte !

job flower 3

FaceCare

SLOW AGEING DAY CREAM 100.135.1.1

NEW ALL NATURAL INGREDIENTS

HYDRATING. ANTIOXIDANT. REGENERATING.

Alternative preservation: Cosphaderm® LAAS, Cosphaderm® GMCY

PHASE INGREDIENT COSMOS INCI SUPPLIER %
A Demin. Water Aqua - 72.80
A Cosphaderm® Propanediol natural ✓ Propanediol Cosphatec GmbH 3.00
A Cosphaderm® X soft ✓ Xanthan Gum Cosphatec GmbH 0.30
A Cosphaderm® Sodium Hyaluronate low ✓ Sodium Hyaluronate Cosphatec GmbH 0.20
A Cosphaderm® PA-12 ✓ Sodium Phytate Cosphatec GmbH 0.10
B Cosphaderm® SB-75H NON GMO ✓ Hydrogenated Lecithin Cosphatec GmbH 0.50
C Cosphaderm® GS Connect ✓ Glyceryl Stearate Citrate Cosphatec GmbH 2.00
C Lanette® O Cetearyl Alcohol BASF SE 3.00
C Shea Butter refined Butyrospermum Parkii Butter Gustav Heess GmbH 3.00
C Cosphaderm® GMCY ✓ Glyceryl Caprylate Cosphatec GmbH 0.30
C MCT Oil Typ V Ph. Eur. Caprylic/Capric Triglyceride Gustav Heess GmbH 5.00
C Cetiol® OE Dicaprylyl Ether BASF SE 4.00
C Grape Seed Oil Vitis Vinifera Seed Oil Gustav Heess GmbH 2.00
D Cosphaderm® Tocopharin Carnosic Acid Tocopherol Helianthus Annuus Seed Oil Cosphatec GmbH 0.30
D Cosphaderm® LAAS Glycerin Aqua Sodium Levulinate Sodium Anisate Cosphatec GmbH 3.50

Manufacturing Process

Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Adjust pH to 5 – 6 and add phase B. Heat to 75°C.
Phase C: Combine all ingredients of phase C and heat to 75°C.
Add phase C to phase A/B while stirring.
Phase D: Add phase D under 40 °C and homogenise.
Adjust the pH to 5.5 ± 0.05.

Specification

Appearance: White high viscous cream
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

AFTER-SUN GEL 100.54.2.1

COOLING. STRESS-RELIEVING. FAST ABSORBING.

Alternative preservation: Cosphaderm® LA-T, Cosphaderm® Pentiol GL

PHASE INGREDIENT COSMOS INCI SUPPLIER %
A Demin. Water Aqua - 78.40
A Glycerin Glycerin - 5.00
A Cinnamic Acid Cinnamic Acid - 0.20
A Cosphaderm® LA-T ✓ Levulinic Acid Glycerin Sodium Levulinate Aqua Cosphatec GmbH 1.00
B Cosphaderm® X soft ✓ Xanthan Gum Cosphatec GmbH 0.50
B Cosphaderm® Sodium Hyaluronate ✓ Sodium Hyaluronate Cosphatec GmbH 0.20
B Panthenol Panthenol Aqua - 1.00
B Cosphaderm® Pentiol GL Pentylene Glycol Cosphatec GmbH 3.00
B Witch Hazel Water Hamamelis Virginiana Leaf Water - 10.00
B Ronacare® Allantoin Allantoin SUSONITY 0.20
B Aloe Vera Powder Aloe Barbadensis Leaf Juice Powder - 0.50

Manufacturing Process

Phase A: Combine all ingredients of phase A and raise the pH to 11 to dissolve cinnamic acid. When everything is dissolved, lower the pH back to 6 again.
Phase B: Add all ingredients of phase B to phase A and stir until a slightly viscous gel is formed.
Adjust pH to 5.5 ± 0.05.

Specification

Appearance: Yellowish, transparent, slightly viscous gel
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

ANTI SPOT GEL 100.70.1.1

ALL NATURAL INGREDIENTS

ANTI INFLAMMATORY. CLARIFYING. PORE SIZE REDUCING.

Alternative preservation: Cosphaderm® Zinc Lactate natural, Cosphaderm® Propanediol natural

PHASE INGREDIENT COSMOS INCI SUPPLIER %
A Demin. Water Aqua - 88.20
A Cosphaderm® Propanediol natural ✓ Propanediol Cosphatec GmbH 5.00
A Cosphagard® SA natural ✓ Salicylic Acid Cosphatec GmbH 2.00
B Glycerin Glycerin - 2.50
B Cosphaderm® X soft ✓ Xanthan Gum Cosphatec GmbH 0.70
B Cosphaderm® Sodium Hyaluronate high ✓ Sodium Hyaluronate Cosphatec GmbH 0.10
C Cosphaderm® Zinc Lactate natural ✓ Zinc Lactate Cosphatec GmbH 1.00
C Hamamelis Virginiana Leaf Water Hamamelis Virginiana Leaf Water - 0.50

Manufacturing Process

Phase A: Combine all ingredients of phase A. Raise the pH to 11 to dissolve Cosphagard® SA natural. When everything is dissolved, lower the pH back to 4-5 again.
Phase B: Combine Glycerin, Cosphaderm® X 34 and Cosphaderm® Sodium Hyaluronate high and stir until the powder is wetted. Then add it to phase A.
Phase C: Add phase C under stirring.
Adjust the pH to 4.0 ± 0.05.

Specification

Appearance: Transparent, semi-viscous gel
pH: 4.0 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

VITAMIN C GLOW DROPS 100.84.1.1

ANTI-AGING. PORE-REFINING. HYDRATING.

Alternative preservation: Cosphaderm® Heptiol natural

PHASE INGREDIENT COSMOS INCI SUPPLIER %
A Demin. Water Aqua - 87.65
A Cosphaderm® Heptiol natural ✓ 1,2-Heptanediol Cosphatec GmbH 1.00
A Glycerin Glycerin - 2.00
A Inulin Inulin - 1.00
A Sodium PCA Sodium PCA - 0.50
A RonaCare® Nicotinamide Niacinamide SUSONITY 5.00
B Sodium Ascorbyl Phosphate Sodium Ascorbyl Phosphate - 2.00
B Sodium Gluconate Sodium Gluconate - 0.15
C Cosphaderm® Sodium Hyaluronate low ✓ Sodium Hyaluronate Cosphatec GmbH 0.20
C Cosphaderm® Sodium Hyaluronate high ✓ Sodium Hyaluronate Cosphatec GmbH 0.30
C Cosphaderm® X soft ✓ Xanthan Gum Cosphatec GmbH 0.20

Manufacturing Process

Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Add phase B to phase A.
Phase C: Add phase C and stir until everything is completely dissolved.
Adjust pH to 6.5 ± 0.05 if necessary.

Specification

Appearance: Transparent, low viscous serum
pH: 6.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

ANTI-POLLUTION SERUM 100.92.1.1

ALL NATURAL INGREDIENTS

ANTI-AGEING. ANTIOXIDANT. MOISTURISING.

Alternative preservation: Cosphaderm® Dicapo natural, Cosphaderm® Magnolia Extract 98, Cosphaderm® Propanediol natural

PHASE INGREDIENT COSMOS INCI SUPPLIER %
A Demin. Water Aqua - 77.30
A Cosphaderm® Propanediol natural ✓ Propanediol Cosphatec GmbH 3.00
A Cosphaderm® X soft ✓ Xanthan Gum Cosphatec GmbH 0.80
A Cosphaderm® Sodium Hyaluronate high ✓ Sodium Hyaluronate Cosphatec GmbH 0.10
A Cosphaderm® Sodium Hyaluronate low ✓ Sodium Hyaluronate Cosphatec GmbH 0.10
A Sodium PCA Sodium PCA - 0.50
A Sodium Citrate Sodium Citrate - 0.50
A Cosphaderm® SF-75H ✓ Hydrogenated Lecithin Cosphatec GmbH 1.50
B Cosphaderm® GS Connect ✓ Glyceryl Stearate Citrate Cosphatec GmbH 2.00
B Shea Butter refined Butyrospermum Parkii Butter Gustav Heess GmbH 2.00
B Jojoba Oil Simmondsia Chinensis Seed Oil Gustav Heess GmbH 4.00
B MCT Oil Typ V Ph. Eur. Caprylic/Capric Triglyceride Gustav Heess GmbH 5.00
B Camellia Seed Oil Camellia Oleifera Seed Oil - 2.00
C Cosphaderm® Dicapo natural ✓ Caprylyl Glycol Propanediol Glyceryl Caprylate Cosphatec GmbH 0.70
C Cosphaderm® Magnolia Extract 98 ✓ Magnolia Officinalis Bark Extract Cosphatec GmbH 0.20
D Cosphaderm® Tocopharin ✓ Tocopherol Helianthus Annuus Seed Oil Carnosic Acid Cosphatec GmbH 0.30

Manufacturing Process

Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Combine all ingredients of phase B.
Heat both phases separately to 70-75 °C and add phase B to A while stirring. Then homogenise the formulation.
Phase C: Dissolve Cosphaderm® Magnolia Extract 98 in Cosphaderm® Dicapo natural.
Add phase C and phase D to phase A+B after cooling to 40 °C while stirring. Adjust the pH to 5.5 ± 0.05.

Specification

Appearance: Light beige, shiny, fluid emulsion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

ULTRA HYDRATING SERUM 100.106.1.1

ALL NATURAL INGREDIENTS

ANTI-AGING. REGENERATING. SMOOTHING.

Alternative preservation: Cosphaderm® MultiMEG

PHASE INGREDIENT COSMOS INCI SUPPLIER %
A Demin. Water Aqua - 83.10
A Glycerin Glycerin - 5.00
A Cosphaderm® PA-12 ✓ Sodium Phytate Cosphatec GmbH 0.10
A Cosphaderm® X soft ✓ Xanthan Gum Cosphatec GmbH 0.40
A Cosphaderm® Sodium Hyaluronate high ✓ Sodium Hyaluronate Cosphatec GmbH 0.20
A Cosphaderm® Sodium Hyaluronate low ✓ Sodium Hyaluronate Cosphatec GmbH 0.10
B Olivem® 1000 Cetearyl Olivate Sorbitan Olivate Hallstar 2.50
B MCT Oil Typ V Ph. Eur. Caprylic/Capric Triglyceride Gustav Heess GmbH 5.00
B Grape Seed Oil Vitis Vinifera Seed Oil Gustav Heess GmbH 2.00
B Cosphaderm® T-70 NON GMO ECO ✓ Tocopherol Helianthus Annuus Seed Oil Cosphatec GmbH 0.20
C Cosphaderm® MultiMEG ✓ Glyceryl Caprylate Pentylene Glycol Magnolia Officinalis Bark Extract Cosphatec GmbH 1.40

Manufacturing Process

Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Heat to 75 °C.
Phase B: Combine all ingredients and heat to 75 °C. Add then phase B to phase A under strong stirring and homogenise.
Phase C: Add phase C to the formulation and stir.
Adjust the pH to 5.5 ± 0.05.

Specification

Appearance: White, fluid emulsion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

MOISTURE MAGNET CREAM 100.114.1.1

NEW ALL NATURAL INGREDIENTS

HYDRATING. RADIANT. SKIN PROTECTING.

Alternative preservation: Cosphaderm® Sodium LAAS, Cosphaderm® GMCY, Cosphaderm® Magnolia Extract 98

PHASE INGREDIENT COSMOS INCI SUPPLIER %
A Demin. Water Aqua - 70.95
A Cosphaderm® Sodium LAAS ✓ Sodium Levulinate Sodium Anisate Cosphatec GmbH 1.00
A Cosphaderm® Propanediol natural ✓ Propanediol Cosphatec GmbH 4.00
A Cosphaderm® X soft ✓ Xanthan Gum Cosphatec GmbH 0.60
B Cosphaderm® SF-75H ✓ Hydrogenated Lecithin Cosphatec GmbH 0.75
C Cosphaderm® GS Connect ✓ Glyceryl Stearate Citrate Cosphatec GmbH 2.00
C Lanette® O Cetearyl Alcohol BASF SE 1.50
C Behenyl Alcohol Behenyl Alcohol - 1.00
C Shea Butter refined Butyrospermum Parkii Butter Gustav Heess GmbH 5.00
C Cosphaderm® GMCY ✓ Glyceryl Caprylate Cosphatec GmbH 0.30
C Jojoba Oil Simmondsia Chinensis Seed Oil Gustav Heess GmbH 3.50
C MCT Oil Typ V Ph. Eur. Caprylic/Capric Triglyceride Gustav Heess GmbH 5.00
C Squalane Squalane - 4.00
D Cosphaderm® Magnolia Extract 98 ✓ Magnolia Officinalis Bark Extract Cosphatec GmbH 0.10
E Cosphaderm® Tocopharin ✓ Carnosic Acid Tocopherol Helianthus Annuus Seed Oil Cosphatec GmbH 0.30

Manufacturing Process

Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Add phase B to A while stirring. Then heat the water phase to 70-75 °C.
Phase C: Combine all ingredients of phase C and heat to 75°C. Phase D is added to the oil phase just before emulsion is formed.
Add phase C+D to the water phase while stirring. Homogenise at 40°C.
Add phase E to the emulsion.
Adjust the pH to 5.5 ± 0.05.

Specification

Appearance: Light beige, white cream
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

URBAN ANTI-POLLUTION SKIN ELIXIR 100.18.2.1

ANTI-POLLUTION. HIGH SPREADABILITY. ANTI-AGEING.

Alternative preservation: Cosphaderm® Leo, Cosphaderm® Propanediol natural

PHASE INGREDIENT COSMOS INCI SUPPLIER %
A Demin. Water Aqua - 64.30
A Cosphaderm® Sodium Hyaluronate ✓ Sodium Hyaluronate Cosphatec GmbH 0.10
A Cosphaderm® Sodium Hyaluronate low ✓ Sodium Hyaluronate Cosphatec GmbH 0.10
A Cosphaderm® Propanediol natural ✓ Propanediol Cosphatec GmbH 10.00
A Cosphaderm® X soft ✓ Xanthan Gum Cosphatec GmbH 0.50
A Cosphaderm® Leo Dipropylene Glycol Ethylhexylglycerin Caprylhydroxamic Acid Cosphatec GmbH 2.70
B Cosphaderm® SF-75H ✓ Hydrogenated Lecithin Cosphatec GmbH 3.00
B Lanette® 16 Cetyl Alcohol BASF SE 1.00
B Cosphaderm® Feel ✓ Triheptanoin Cosphatec GmbH 4.00
B Babassu Oil Orbignya Oleifera Seed Oil Gustav Heess GmbH 4.00
B Apricot Kernel Oil Prunus Armeniaca Kernel Oil Gustav Heess GmbH 4.00
B Sesame Oil Sesamum Indicum Seed Oil Gustav Heess GmbH 3.00
B Evening Primrose Oil Oenothera Biennis Oil Gustav Heess GmbH 1.00
B Rosehip Seed Oil Rosa Canina Fruit Oil Gustav Heess GmbH 1.00
B Grape Seed Oil Vitis Vinifera Seed Oil Gustav Heess GmbH 1.00
B Cosphaderm® T-70 NON GMO Tocopherol Helianthus Annuus Seed Oil Cosphatec GmbH 0.20
B Cosphaderm® E-1000 NON GMO Tocopherol Helianthus Annuus Seed Oil Cosphatec GmbH 0.10

Manufacturing Process

Phase A: Prepare phase A and stir until complete dissolution.
Phase B: Prepare phase B and heat to 50 °C until everything is melted. Let the mixture cool down to room temperature.
Add phase B to phase A and homogenise.
Adjust the pH to 5.5 ± 0.05.

Specification

Appearance: White, viscous emulsion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

VITALISING SKIN GEL (A) 100.28.2.1

ALL NATURAL INGREDIENTS

QUICKLY ABSORBING. RICH SKIN FEEL. HYDRATING.

Alternative preservation: Cosphaderm® LA-T, Cosphaderm® Sodium pAS natural

PHASE INGREDIENT COSMOS INCI SUPPLIER %
A Demin. Water Aqua - 82.20
A Glycerin Glycerin - 4.00
A Cosphaderm® X soft ✓ Xanthan Gum Cosphatec GmbH 1.00
A Cosphaderm® Sodium Hyaluronate low ✓ Sodium Hyaluronate Cosphatec GmbH 0.20
A Cosphaderm® LA-T ✓ Levulinic Acid Glycerin Sodium Levulinate Aqua Cosphatec GmbH 1.20
B Cosphaderm® Sodium pAS natural ✓ Sodium Anisate Cosphatec GmbH 0.40
C Cosphaderm® SF-75H ✓ Hydrogenated Lecithin Cosphatec GmbH 3.50
C Sunflower Oil Helianthus Annuus Seed Oil Gustav Heess GmbH 5.00
C Jojoba Oil Simmondsia Chinensis Seed Oil Gustav Heess GmbH 2.50

Manufacturing Process

Phase A: Prepare phase A and stir until everything is completely dissolved. Adjust pH value to 5.5.
Phase B: Add Cosphaderm® Sodium pAS natural to phase A under stirring.
Phase C: Prepare phase C and add it to phase A/B. Homogenise.
Adjust pH value to 5.5 ± 0.05.

Specification

Appearance: Beige, shiny, low viscous emulsion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

VITALISING SKIN GEL (B) 100.28.3.1

ALL NATURAL INGREDIENTS

QUICKLY ABSORBING. RICH SKIN FEEL. HYDRATING.

Alternative preservation: Cosphaderm® LA-T, Cosphaderm® pAS natural

PHASE INGREDIENT COSMOS INCI SUPPLIER %
A Demin. Water Aqua - 82.20
A Cosphaderm® pAS natural ✓ p-Anisic Acid Cosphatec GmbH 0.40
A Cosphaderm® LA-T ✓ Levulinic Acid Glycerin Sodium Levulinate Aqua Cosphatec GmbH 1.20
B Glycerin Glycerin - 4.00
B Cosphaderm® X soft ✓ Xanthan Gum Cosphatec GmbH 1.00
B Cosphaderm® Sodium Hyaluronate low ✓ Sodium Hyaluronate Cosphatec GmbH 0.20
C Cosphaderm® SF-75H ✓ Hydrogenated Lecithin Cosphatec GmbH 3.50
C Sunflower Oil Helianthus Annuus Seed Oil Gustav Heess GmbH 5.00
C Jojoba Oil Simmondsia Chinensis Seed Oil Gustav Heess GmbH 2.50

Manufacturing Process

Phase A: Prepare phase A. Raise the pH to 10 to dissolve Cosphaderm® pAS natural and stir until everything is completely dissolved. Afterwards, adjust the pH to 5.5 ± 0.05 by adding Citric Acid.
Phase B: Prepare phase B and add it to phase A while stirring. Stir until everything is completely dissolved.
Phase C: Prepare phase C and add it to phase A/B. Homogenise.
Adjust pH value to 5.5 ± 0.05.

Specification

Appearance: Beige, shiny, low viscous emulsion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

VITALISING SKIN GEL (C) 100.28.4.1

QUICKLY ABSORBING. RICH SKIN FEEL. HYDRATING.

Alternative preservation: Cosphaderm® LA-T, Cosphaderm® AS

PHASE INGREDIENT COSMOS INCI SUPPLIER %
A Demin. Water Aqua - 82.20
A Cosphaderm® AS p-Anisic Acid Cosphatec GmbH 0.40
A Cosphaderm® LA-T ✓ Levulinic Acid Glycerin Sodium Levulinate Aqua Cosphatec GmbH 1.20
B Glycerin Glycerin - 4.00
B Cosphaderm® X soft ✓ Xanthan Gum Cosphatec GmbH 1.00
B Cosphaderm® Sodium Hyaluronate low ✓ Sodium Hyaluronate Cosphatec GmbH 0.20
C Cosphaderm® SF-75H ✓ Hydrogenated Lecithin Cosphatec GmbH 3.50
C Sunflower Oil Helianthus Annuus Seed Oil Gustav Heess GmbH 5.00
C Jojoba Oil Simmondsia Chinensis Seed Oil Gustav Heess GmbH 2.50

Manufacturing Process

Phase A: Prepare phase A. Raise the pH to 10 to dissolve Cosphaderm® AS natural and stir until everything is completely dissolved. Afterwards, adjust the pH to 5.5 ± 0.05 by adding Citric Acid.
Phase B: Prepare phase B and add it to phase A while stirring. Stir until everything is completely dissolved.
Phase C: Prepare phase C and add it to phase A/B. Homogenise.
Adjust pH value to 5.5 ± 0.05.

Specification

Appearance: Beige, shiny, low viscous emulsion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

VITALISING SKIN GEL WITH COSPHADERM® SB-75H 100.28.2.3

QUICKLY ABSORBING. RICH SKIN FEEL. HYDRATING.

Alternative preservation: Cosphaderm® LA-T, Cosphaderm® Sodium pAS natural

PHASE INGREDIENT COSMOS INCI SUPPLIER %
A Demin. Water Aqua - 59.70
A Glycerin Glycerin - 4.00
A Cosphaderm® X soft ✓ Xanthan Gum Cosphatec GmbH 1.00
A Cosphaderm® Sodium Hyaluronate low ✓ Sodium Hyaluronate Cosphatec GmbH 0.20
A Cosphaderm® LA-T ✓ Levulinic Acid Glycerin Sodium Levulinate Aqua Cosphatec GmbH 1.20
B Cosphaderm® Sodium pAS natural ✓ Sodium Anisate Cosphatec GmbH 0.40
C Demin. Water Aqua - 22.50
C Cosphaderm® SB-75H ✓ Hydrogenated Lecithin Cosphatec GmbH 3.50
C Sunflower Oil Helianthus Annuus Seed Oil Gustav Heess GmbH 5.00
C Jojoba Oil Simmondsia Chinensis Seed Oil Gustav Heess GmbH 2.50

Manufacturing Process

Phase A: Prepare phase A and stir until everything is completely dissolved. Adjust pH value to 5.5.
Phase B: Add Cosphaderm® Sodium pAS natural to phase A under stirring.
Phase C: Prepare phase C and homogenise for 5 minutes with high performance disperser (stator/rotor) at max. speed.
Add phase C to phase A+B in small steps under stirring.
Adjust pH value to 5.5 ± 0.05.

Specification

Appearance: Shiny liquid emulsion
pH: 5.5 ± 0.05
Stability: no separation after centrifugation (4000 rpm, 30 min)

HairCare

CURLING BOOSTER SHAMPOO 400.82.1.1

ALL NATURAL INGREDIENTS

CONDITIONING. HYDRATING. VEGAN.

Alternative preservation: Cosphaderm® Sodium LAAS, Cosphaderm® Propanediol natural

PHASE INGREDIENT COSMOS INCI SUPPLIER %
A Demin. Water Aqua - 65.60
A Cosphaderm® Propanediol natural ✓ Propanediol Cosphatec GmbH 5.00
A Cosphaderm® Sodium LAAS ✓ Sodium Levulinate Sodium Anisate Cosphatec GmbH 1.00
A Cosphaderm® X soft ✓ Xanthan Gum Cosphatec GmbH 0.80
B Plantacare® 2000 UP Decyl Glucoside BASF SE 20.00
C Cosphaderm® E NGM natural Lysolecithin Cosphatec GmbH 1.00
C Lanette® O Cetearyl Alcohol BASF SE 4.00
C SOFTISAN® conditionHAIR PCA Glyceryl Oleate IOI Oleo GmbH 0.50
C Cotton Oil Gossypium Herbaceum Seed Oil Gustav Heess GmbH 2.00
C Cosphaderm® T-70 NON GMO ECO Tocopherol Helianthus Annuus Seed Oil Cosphatec GmbH 0.10

Manufacturing Process

Phase A: Combine all ingredients of phase A and stir until everything is dissolved.
Phase B: Slowly add phase B to phase A under stirring. Stir until complete dissolution.
Adjust pH to 5.5 ± 0.05 and heat phase A and B to 70 °C.
Phase C: Combine all ingredients and heat phase C to 70 °C. Add then phase C to phase A and B under strong stirring and homogenise the formulation.
Adjust pH to 5.2 ± 0.05.

Specification

Appearance: Slightly yellowish gel cream
pH: 5.2 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

DETANGLE SHAMPOO 400.46.2.1

ALL NATURAL INGREDIENTS

CONDITIONING. DETANGLING. SULFATE-FREE.

Alternative preservation: Cosphaderm® GeMix, Cosphaderm® Sodium pAS natural

PHASE INGREDIENT COSMOS INCI SUPPLIER %
A Demin. Water Aqua - 71.90
A Glycerin Glycerin - 3.00
A Cosphaderm® X soft ✓ Xanthan Gum Cosphatec GmbH 1.00
A Cosphaderm® PA ECONAT ✓ Phytic Acid Aqua Cosphatec GmbH 0.10
B Cosphaderm® GeMix ✓ Glyceryl Caprylate Glyceryl Undecylenate Cosphatec GmbH 1.00
B Cosphaderm® Sodium pAS natural Sodium Anisate Cosphatec GmbH 0.20
B SOFTISAN® conditionHAIR PCA Glyceryl Oleate IOI Oleo GmbH 0.50
B Perlastan® SC Sodium/Disodium Cocoyl Glutamate Schill + Seilacher Struktol GmbH 10.00
B Plantacare® 818 UP Coco Glucoside BASF SE 10.00
B Plantacare® 1200 UP Lauryl Glucoside BASF SE 2.00
B MCT Oil Typ V Ph. Eur. Caprylic/Capric Triglyceride Gustav Heess GmbH 0.30

Manufacturing Process

Phase A: Combine all ingredients of phase A and stir slowly until everything is completely dissolved.
Phase B: Combine all ingredients of phase B.
Add phase B to phase A under stirring with the propeller stirrer.
Adjust the pH to 5.5 ± 0.05.

Specification

Appearance: Milky, white viscous gel
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

Cleansing

REFRESHING GEL CLEANSER 300.142.1.1

NEW ALL NATURAL INGREDIENTS

NATURAL. FREE OF SLS. MILD CLEANSING.

Alternative preservation: Cosphaderm® Pentiol natural, Cosphaderm® GMCY

PHASE INGREDIENT COSMOS INCI SUPPLIER %
A Demin. Water Aqua - 80.50
A Glycerin Glycerin - 3.00
A Allantoin Allantoin - 0.20
A Cosphaderm® X soft ✓ Xanthan Gum Cosphatec GmbH 1.00
A Betaine Betaine - 1.00
B Plantacare® 2000 UP Decyl Glucoside BASF SE 7.00
B Dehyton® K Cocamidopropyl Betaine Aqua BASF SE 4.00
C Cosphaderm® GMCY ✓ Glyceryl Caprylate Cosphatec GmbH 0.30
C Cosphaderm® Pentiol natural ✓ Pentylene Glycol Cosphatec GmbH 3.00

Manufacturing Process

Phase A: Combine all ingredients and stir until everything is completely dissolved.
Phase B: Combine phase B separately and add phase B to phase A under soft stirring.
Phase C: Add phase C and stir until everything is completely dissolved.
Adjust the pH to 5.5 ± 0.05.

Specification

Appearance: Transparent viscous gel
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

FACIAL CLEANSING LOTION 300.57.1.1

ALL NATURAL INGREDIENTS

NOURISHING. VEGAN. PURIFYING.

Alternative preservation: Cosphaderm® TOM, Cosphaderm® Propanediol natural

PHASE INGREDIENT COSMOS INCI SUPPLIER %
A Demin. Water Aqua - 74.05
A Cosphagard® SA natural ✓ Salicylic Acid Cosphatec GmbH 1.00
B Glycerin Glycerin - 2.00
B Aloe Vera Powder Aloe Barbadensis Leaf Juice Powder - 0.25
B Cosphaderm® Propanediol natural ✓ Propanediol Cosphatec GmbH 5.00
B Cosphaderm® X soft ✓ Xanthan Gum Cosphatec GmbH 0.50
C Coconut Oil Coco Nucifera Oil Gustav Heess GmbH 4.50
C Jojoba Oil Simmondsia Chinensis Seed Oil Gustav Heess GmbH 1.00
C Cosphaderm® Feel ✓ Triheptanoin Cosphatec GmbH 4.00
C Almond Oil Prunus Amygdalus Dulcis Oil Gustav Heess GmbH 1.00
C Cosphaderm® T-70 NON GMO ECO ✓ Tocopherol Helianthus Annuus Seed Oil Cosphatec GmbH 0.10
C Cosphaderm® SF-75H ✓ Hydrogenated Lecithin Cosphatec GmbH 1.00
C Imwitor 960 K Glyceryl Stearate SE IOI Oleo GmbH 4.00
D Cosphaderm® TOM ✓ Pentylene Glycol Glyceryl Caprylate Glyceryl Undecylenate Cosphatec GmbH 1.60

Manufacturing Process

Phase A: Combine water and Cosphagard® SA natural and raise the pH value to 10 – 11. Stir until complete dissolution. Afterwards lower the pH to approximately 6.
Phase B: Add phase B to phase A and stir until everything is completely dissolved. Heat to 70 °C.
Phase C: Combine all ingredients of phase C and heat to 70 °C.
Add phase C to A+B while stirring. Homogenise at 40°C.
Phase D: Add Cosphaderm® TOM to the emulsion.
Adjust pH to 6.0 ± 0.05.

Specification

Appearance: Light beige lotion
pH: 6.0 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

HYGIENIC HAND GEL 300.66.1.1

ALL NATURAL INGREDIENTS

DISINFECTING. NON-STICKY. FAST ABSORBING.

Alternative preservation: Cosphaderm® Pentiol natural

PHASE INGREDIENT COSMOS INCI SUPPLIER %
A Demin. Water Aqua - 49.60
A Cosphaderm® X soft ✓ Xanthan Gum Cosphatec GmbH 0.40
B Cosphaderm® Pentiol natural ✓ Pentylene Glycol Cosphatec GmbH 20.00
C Ethanol Alcohol Cosphatec GmbH 30.00

Manufacturing Process

Phase A: Add Cosphaderm® X soft to the water and stir until it’s completely dissolved.
Phase B: Add phase B in small steps to phase A while stirring at 1500rpm.
Phase C: Add phase C in small steps to phase A+B while stirring at 1500rpm.
Adjust the pH to 7.0 ± 0.05.

Specification

Appearance: translucent, viscous gel
pH: 7.0 ± 0.05

Tested against bacteria according to DIN EN 1500, 1276, 1650.

Bodycare

SOOTHING BODY LOTION 200.126.1.1

NEW ALL NATURAL INGREDIENTS

VELVET. REGENERATING. FAST-ABSORBING.

Alternative preservation: Cosphaderm® Sodium LAAS, Cosphaderm® Octiol natural

PHASE INGREDIENT COSMOS INCI SUPPLIER %
A Demin. Water Aqua - 77.70
A Glycerin Glycerin - 2.00
A Cosphaderm® Sodium LAAS ✓ Sodium Levulinate Sodium Anisate Cosphatec GmbH 1.00
A Cosphaderm® Octiol natural ✓ Caprylyl Glycol Cosphatec GmbH 0.30
A Cosphaderm® X soft ✓ Xanthan Gum Cosphatec GmbH 0.50
B Cosphaderm® SF-75H ✓ Hydrogenated Lecithin Cosphatec GmbH 0.50
C Cosphaderm® GS Connect ✓ Glyceryl Stearate Citrate Cosphatec GmbH 2.50
C Lanette® 16 Cetyl Alcohol BASF SE 1.20
C Shea Butter refined Butyrospermum Parkii Butter Gustav Heess GmbH 3.00
C Jojoba Oil Simmondsia Chinensis Seed Oil Gustav Heess GmbH 3.00
C Cetiol® CC Dicaprylyl Carbonate BASF SE 2.00
C MCT Oil Typ V Ph. Eur. Caprylic/Capric Triglyceride Gustav Heess GmbH 4.00
C Squalane Squalane - 2.00
D Cosphaderm® Tocopharin ✓ Carnosic Acid Tocopherol Helianthus Annuus Seed Oil Cosphatec GmbH 0.30

Manufacturing Process

Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Add phase B to the water phase while stirring. Then heat the water phase to 70-75 °C.
Phase C: Combine all ingredients of phase C and heat to 75°C.
Add phase C to the water phase while stirring. Add phase D to the emulsion and homogenise.
Adjust the pH to 5.5 ± 0.05.

Specification

Appearance: white, slightly beige viscous lotion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

MenCare

ACTIVATING BEARD SHAMPOO 600.132.1.1

NEW ALL NATURAL INGREDIENTS

STIMULATING. CLEANSING. CONDITIONING.

Alternative preservation: Cosphaderm® Pentiol natural, Cosphaderm® Zinc Lactate natural

PHASE INGREDIENT COSMOS INCI SUPPLIER %
A Demin. Water Aqua - 78.70
A Cosphaderm® Pentiol natural ✓ Pentylene Glycol Cosphatec GmbH 3.00
A Sulfopon® 1216 G Sodium Coco Sulfate BASF SE 4.00
A Caffeine Powder Caffeine - 1.00
B Cosphaderm® X soft ✓ Xanthan Gum Cosphatec GmbH 1.20
B Cosphaderm® Zinc Lactate natural ✓ Zinc Lactate Cosphatec GmbH 0.50
C Dehyton® K Cocamidopropyl Betaine BASF SE 6.00
C Plantacare® 818 UP Coco Glucoside BASF SE 4.00
C Imwitor® 948 Glyceryl Oleate IOI Oleo GmbH 1.00
C Argan Oil Argania Spinosa Kernel Oil Gustav Heess GmbH 0.50
C Cosphaderm® Tocopharin ✓ Carnosic Acid Tocopherol Helianthus Annuus Seed Oil Cosphatec GmbH 0.10

Manufacturing Process

Phase A: Combine all ingredients and dissolve Phase A at 40°C. Adjust the pH below 7.
Phase B: Add phase B to phase A under stirring and stir until everything is completely dissolved.
Phase C: Prepare phase C and add to phase A+B under slow stirring to prevent foaming.
Adjust the pH to 5.5 ± 0.05.

Specification

Appearance: Slightly cloudy viscous gel
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

Cosphatec_RGB

Bulletin d'information

Inscrivez-vous maintenant à notre newsletter électronique et recevez les dernières informations sur nos produits.

S'abonner maintenant à la newsletter

Demander un échantillon

Veuillez remplir tous les champs *obligatoires

Demander une fiche d'information

Formulations