FORMULIERUNGEN

MODERNE KOSMETIK FÜR ANSPRUCHSVOLLE ENTWICKLER

Wir verstehen die Anforderungen und Fragestellungen von Kosmetik-Entwicklern. Darum verbringen wir viel Zeit mit Anwendungstechnik in unserem In-House Labor. Hier untersuchen wir die Einarbeitung und Wirkung von Rohstoffen, um unseren Kunden den bestmöglichen Support und passende Empfehlungen bieten zu können.

Ein ausgewähltes Set an Formulierungen haben wir hier zum Download bereitgestellt – viel Spaß damit!

FaceCare

SLOW AGEING DAY CREAM ALL NATURAL INGREDIENTS

100.135.1.1

HYDRATING. ANTIOXIDANT. REGENERATING.

Alternative preservation: Cosphaderm® LAAS, Cosphaderm® GMCY

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	72.80
A	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	3.00
A	Cosphaderm® X soft	Xanthan Gum	Cosphatec GmbH	0.30
A	Cosphaderm® Sodium Hyaluronate low	Sodium Hyaluronate	Cosphatec GmbH	0.20
A	Cosphaderm® PA-12	Sodium Phytate	Cosphatec GmbH	0.10
B	Cosphaderm® SB-75H NON GMO	Hydrogenated Lecithin	Cosphatec GmbH	0.50
C	Cosphaderm® GS Connect	Glyceryl Stearate Citrate	Cosphatec GmbH	2.00
C	Lanette® O	Cetearyl Alcohol	BASF SE	3.00
C	Shea Butter refined	Butyrospermum Parkii Butter	Cosphatec GmbH	3.00
C	Cosphaderm® GMCY	Glyceryl Caprylate	Cosphatec GmbH	0.30
C	MCT Oil Typ V Ph. Eur.	Caprylic/Capric Triglyceride	Gustav Heess GmbH	5.00
C	Cetiol® OE	Dicaprylyl Ether	BASF SE	4.00
C	Grape Seed Oil	Vitis Vinifera Seed Oil	Gustav Heess GmbH	2.00
D	Cosphaderm® Tocopharin	Carnosic AcidTocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.30
D	Cosphaderm® LAAS	GlycerinAquaSodium LevulinateSodium Anisate	Cosphatec GmbH	3.50

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Adjust pH to 5 – 6 and add phase B. Heat to 75°C.
Phase C: Combine all ingredients of phase C and heat to 75°C.
Add phase C to phase A/B while stirring.
Phase D: Add phase D under 40 °C and homogenise.
Adjust the pH to 5.5 ± 0.05.

SPECIFICATION
Appearance: White high viscous cream
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

AFTER-SUN GEL

100.54.2.1

COOLING. STRESS-RELIEVING. FAST ABSORBING.

Alternative preservation: Cosphaderm® LA-T, Cosphaderm® Pentiol GL

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	78.40
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	5.00
A	Cinnamic Acid	Cinnamic Acid	-	0.20
A	Cosphaderm® LA-T	Levulinic AcidGlycerinSodium LevulinateAqua	Cosphatec GmbH	1.00
B	Cosphaderm® X soft	Xanthan Gum	Cosphatec GmbH	0.50
B	Cosphaderm® Sodium Hyaluronate	Sodium Hyaluronate	Cosphatec GmbH	0.20
B	Cosphaderm® Panthenol natural	Panthenol	Cosphatec GmbH	1.00
B	Cosphaderm® Pentiol GL	Pentylene Glycol	Cosphatec GmbH	3.00
B	Witch Hazel Water	Hamamelis Virginiana Leaf Water	-	10.00
B	Ronacare® Allantoin	Allantoin	Merck KGaA	0.20
B	Aloe Vera Powder	Aloe Barbadensis Leaf Juice Powder	-	0.50

Manufacturing Process
Phase A: Combine all ingredients of phase A and raise the pH to 11 to dissolve cinnamic acid. When everything is dissolved, lower the pH back to 6 again.
Phase B: Add all ingredients of phase B to phase A and stir until a slightly viscous gel is formed.
Adjust pH to 5.5 ± 0.05.

Specification
Appearance: Yellowish, transparent, slightly viscous gel
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

ANTI SPOT GEL ALL NATURAL INGREDIENTS

100.70.1.1

ANTI INFLAMMATORY. CLARIFYING. PORE SIZE REDUCING.

Alternative preservation: Cosphaderm® Zinc Lactate natural, Cosphaderm® Propanediol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	88.20
A	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	5.00
A	Cosphagard® SA natural	Salicylic Acid	Cosphatec GmbH	2.00
B	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	2.50
B	Cosphaderm® X soft	Xanthan Gum	Cosphatec GmbH	0.70
B	Cosphaderm® Sodium Hyaluronate high	Sodium Hyaluronate	Cosphatec GmbH	0.10
C	Cosphaderm® Zinc Lactate natural	Zinc Lactate	Cosphatec GmbH	1.00
C	Hamamelis Virginiana Leaf Water	Hamamelis Virginiana Leaf Water	-	0.50

Manufacturing Process
Phase A: Combine all ingredients of phase A. Raise the pH to 11 to dissolve Cosphagard® SA natural. When everything is dissolved, lower the pH back to 4-5 again.
Phase B: Combine Glycerin, Cosphaderm® X 34 and Cosphaderm® Sodium Hyaluronate high and stir until the powder is wetted. Then add it to phase A.
Phase C: Add phase C under stirring.
Adjust the pH to 4.0 ± 0.05.

Specification
Appearance: Transparent, semi-viscous gel
pH: 4.0 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

ANTI-WRINKLE BASE

100.39.1.1

PORE FILLING. LONG LASTING. MINIMALISTIC FORMULATION.

Alternative preservation: Cosphaderm® Octiol, Cosphaderm® Propanediol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	6.00
A	Natrosol® 250 HX	Hydroxyethylcellulose	-	1.00
A	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	4.50
A	Cosphaderm® Sodium Hyaluronate high	Sodium Hyaluronate	Cosphatec GmbH	0.20
B	Demin. Water	Aqua	-	88.00
C	Cosphaderm® Octiol	Caprylyl Glycol	Cosphatec GmbH	0.30
C	Phenylpropanol	Phenylpropanol	-	0.20

Manufacturing Process
Phase A: Disperse the thickeners in glycerol and Cosphaderm® Propanediol natural.
Phase B: Add demin. water and stir until everything is dissolved.
Phase C: Add phase C to A/B.
Adjust the pH to 5.5 ± 0.05.

Specification
Appearance: Translucent, viscous gel
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

BHA LIQUID PEELING ALL NATURAL INGREDIENTS

100.98.1.1

EXFOLIATING. HYDRATING. SOOTHING.

Alternative preservation: Cosphaderm® Absolute

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	76.00
A	Cosphagard® SA natural	Salicylic Acid	Cosphatec GmbH	2.00
B	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	2.00
B	Cosphaderm® Absolute	PropanediolSodium LactateBetaineAqua	Cosphatec GmbH	20.00

MANUFACTURING PROCESS
Phase A: Combine the ingredients of phase A. Raise the pH to 11 to dissolve Cosphagard® SA natural. When everything is dissolved, lower the pH back to 4-5 again.
Phase B: Add phase B to A while stirring.
Adjust the pH to 4.0 ± 0.05.

SPECIFICATION
Appearance: Clear solution
pH: 4.0 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

BOOSTING SERUM ALL NATURAL INGREDIENTS

100.7.4.1

ANTI-AGING. FAST ABSORBING. HYDRATING.

Alternative preservation: Cosphaderm® Propanediol natural, Cosphaderm® Octiol natural, Cosphaderm® CHA

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	93.10
A	Cosphaderm® CHA	Caprylhydroxamic Acid	Cosphatec GmbH	0.10
B	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	5.00
B	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	1.00
B	Cosphaderm® Octiol natural	Caprylyl Glycol		0.30
B	Cosphaderm® Sodium Hyaluronate high	Sodium Hyaluronate	Cosphatec GmbH	0.30
B	Cosphaderm® Sodium Hyaluronate low	Sodium Hyaluronate	Cosphatec GmbH	0.20

Manufacturing Process
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Combine all ingredients of phase B separately and add to phase A under stirring.
Adjust pH to 5.5 ± 0.05 if necessary.

Specification
Appearance: Transparent, low viscous serum
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

HYDRATING HYALURON SERUM

100.117.1.1

PORE REFINING. MOISTURISING. SMOOTHING.

Alternative preservation: Cosphaderm® Pentiol natural, Cosphaderm® Zinc Lactate natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	88.50
A	Cosphaderm® Pentiol natural	Pentylene Glycol	Cosphatec GmbH	2.00
A	Cosphaderm® Panthenol natural	Panthenol	Cosphatec GmbH	0.50
B	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	3.00
B	Cosphaderm® Sodium Hyaluronate high	Sodium Hyaluronate	Cosphatec GmbH	0.30
B	Cosphaderm® Sodium Hyaluronate low	Sodium Hyaluronate	Cosphatec GmbH	0.20
C	Cosphaderm® Zinc Lactate natural	Zinc Lactate	Cosphatec GmbH	0.50
C	RonaCare® Niacinamide	Niacinamide	Merck KGaA	5.00

Manufacturing Process
Phase A: Combine all ingredients of phase A.
Phase B: Combine all ingredients of phase B separately and add to phase A under stirring.
Phase C: Add phase C to A/B and stir until everything is completely dissolved.
Adjust pH to 5.5 ± 0.05.

HYDRO PLUS HYALURON AMPOULE ALL NATURAL INGREDIENTS

100.115.1.1

MOISTURISING. PLUMPING. ANTI-AGEING.

Alternative preservation: Cosphaderm® Butiol natural, Cosphaderm® GMCY

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	85.60
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	3.00
A	Aloe Vera Powder	Aloe Barbadensis Leaf Juice Powder	-	0.10
A	Cosphaderm® Butiol natural	Butylene Glycol	Cosphatec GmbH	8.00
B	Cosphaderm® Sodium Hyaluronate	Sodium Hyaluronate	Cosphatec GmbH	0.40
B	Cosphaderm® Sodium Hyaluronate high	Sodium Hyaluronate	Cosphatec GmbH	0.10
B	Cosphaderm® Sodium Hyaluronate low 5	Sodium Hyaluronate	Cosphatec GmbH	0.10
C	Sepiclear™ G7	Heptyl Glucoside	SEPPIC, S.A.	2.40
C	Cosphaderm® GMCY	Glyceryl Caprylate	Cosphatec GmbH	0.30

Manufacturing Process
Phase A: Combine all ingredients of phase A and stir until everything is dissolved.
Phase B: Premix all ingredients of phase B and add to phase A while stirring.
Phase C: Combine the ingredients of phase C and add them to the formulation. Stir until everything is homogeneous.
Adjust pH to 5.5 ± 0.05.

Specification
Appearance: Clear, transparent, low viscous gel
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

MOISTURISING FACE GEL

100.29.1.1

HYDRATING. REFRESHING. SKIN REFINING.

Alternative preservation: Cosphaderm® Pentiol GL, Cosphaderm® Hexiol

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	84.00
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	5.00
A	Cosphaderm® Pentiol GL	Pentylene Glycol	Cosphatec GmbH	3.00
A	Cosphaderm® Hexiol	1,2-Hexanediol	Cosphatec GmbH	1.50
A	RonaCare® Nicotinamide	Niacinamide	Merck KGaA	4.00
A	Cosphaderm® Panthenol natural	Panthenol	Cosphatec GmbH	2.00
A	Cosphaderm® Sodium Hyaluronate low	Sodium Hyaluronate	Cosphatec GmbH	0.10
B	Carbopol® Ultrez-21	Acrylates/C10-30 Alkyl Acrylate Crosspolymer	Lubrizol	0.40

Manufacturing Process
Combine all ingredients of phase A and stir until everything is completely dissolved. Then add phase B to phase A under stirring.
Adjust the pH to 6.0 ± 0.05 to thicken the formulation.

Specification
Appearance: Transparent, clear, viscous gel
pH: 6.0 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

SKIN PERFECTING TONER ALL NATURAL INGREDIENTS

100.61.1.2

EXFOLIATING. PORE SIZE REDUCING. SOOTHING.

Alternative preservation: Cosphaderm® Pentiol natural, Cosphaderm® Propanediol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	90.90
A	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	4.00
A	Cosphaderm® Pentiol natural	Pentylene Glycol	Cosphatec GmbH	3.00
A	Cosphagard® SA natural	Salicylic Acid	Cosphatec GmbH	2.00
B	Cosphaderm® PA ECONAT	Phytic AcidAqua	Cosphatec GmbH	0.10

Manufacturing Process
Phase A: Combine all ingredients of phase A. Raise the pH to 11 to dissolve Cosphagard® SA natural
completely.
Phase B: Add phase B and lower the pH to 4.0 ± 0.05.

Specification
Appearance: Clear, liquid solution
pH: 4.0 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

REVITALISING FACIAL TONER ALL NATURAL INGREDIENTS

100.119.1.1

HYDRATING. PROTECTING. REFRESHING.

Alternative preservation: Cosphaderm® Hexiol natural, Cosphaderm® Pentiol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	84.55
A	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	3.00
A	Aloe Vera Powder	Aloe Barbadensis Leaf Juice Powder	Worlée-Chemie GmbH	0.10
A	Glycoin® natural	AquaGlyceryl Glucoside	bitop AG	0.50
A	Cosphaderm® Pentiol natural	Pentylene Glycol	Cosphatec GmbH	4.00
A	Cosphaderm® Hexiol natural	1,2-Hexanediol	Cosphatec GmbH	1.50
A	Cosphaderm® Panthenol natural	Panthenol	Cosphatec GmbH	1.00
A	Ronacare® Allantoin	Allantoin	Merck KGaA	0.20
B	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	5.00
B	Cosphaderm® Sodium Hyaluronate	Sodium Hyaluronate	Cosphatec GmbH	0.15

Manufacturing Process
Phase A: Combine all ingredients of phase A.
Phase B: Prepare phase B and slowly add to phase A under stirring. Continue stirring until everything is completely dissolved.
Adjust pH to 5.5 ± 0.05.

Specification
Appearance: Transparent, clear liquid
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

VITAMIN C GLOW DROPS

100.84.1.1

ANTI-AGING. PORE-REFINING. HYDRATING.

Alternative preservation: Cosphaderm® Heptiol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	87.65
A	Cosphaderm® Heptiol natural	1,2-Heptanediol	Cosphatec GmbH	1.00
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	2.00
A	Inulin	Inulin	-	1.00
A	Sodium PCA	Sodium PCA	-	0.50
A	RonaCare® Nicotinamide	Niacinamide	Merck KGaA	5.00
B	Sodium Ascorbyl Phosphate	Sodium Ascorbyl Phosphate	-	2.00
B	Sodium Gluconate	Sodium Gluconate	-	0.15
C	Cosphaderm® Sodium Hyaluronate low	Sodium Hyaluronate	Cosphatec GmbH	0.20
C	Cosphaderm® Sodium Hyaluronate high	Sodium Hyaluronate	Cosphatec GmbH	0.30
C	Cosphaderm® X soft	Xanthan Gum	Cosphatec GmbH	0.20

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Add phase B to phase A.
Phase C: Add phase C and stir until everything is completely dissolved.
Adjust pH to 6.5 ± 0.05 if necessary.

SPECIFICATION
Appearance: Transparent, low viscous serum
pH: 6.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

ANTI-POLLUTION SERUM ALL NATURAL INGREDIENTS

100.92.1.1

ANTI-AGEING. ANTIOXIDANT. MOISTURISING.

Alternative preservation: Cosphaderm® Dicapo natural, Cosphaderm® Magnolia Extract 98, Cosphaderm® Propanediol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	77.30
A	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	3.00
A	Cosphaderm® X soft	Xanthan Gum	Cosphatec GmbH	0.80
A	Cosphaderm® Sodium Hyaluronate high	Sodium Hyaluronate	Cosphatec GmbH	0.10
A	Cosphaderm® Sodium Hyaluronate low	Sodium Hyaluronate	Cosphatec GmbH	0.10
A	Sodium PCA	Sodium PCA	-	0.50
A	Sodium Citrate	Sodium Citrate	-	0.50
A	Cosphaderm® SF-75H	Hydrogenated Lecithin	Cosphatec GmbH	1.50
B	Cosphaderm® GS Connect	Glyceryl Stearate Citrate	Cosphatec GmbH	2.00
B	Shea Butter refined	Butyrospermum Parkii Butter	Gustav Heess GmbH	2.00
B	Jojoba Oil	Simmondsia Chinensis Seed Oil	Gustav Heess GmbH	4.00
B	MCT Oil Typ V Ph. Eur.	Caprylic/Capric Triglyceride	Gustav Heess GmbH	5.00
B	Camellia Seed Oil	Camellia Oleifera Seed Oil	-	2.00
C	Cosphaderm® Dicapo natural	Caprylyl GlycolPropanediolGlyceryl Caprylate	Cosphatec GmbH	0.70
C	Cosphaderm® Magnolia Extract 98	Magnolia Officinalis Bark Extract	Cosphatec GmbH	0.20
D	Cosphaderm® Tocopharin	TocopherolHelianthus Annuus Seed OilCarnosic Acid	Cosphatec GmbH	0.30

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Combine all ingredients of phase B.
Heat both phases separately to 70-75 °C and add phase B to A while stirring. Then homogenise the formulation.
Phase C: Dissolve Cosphaderm® Magnolia Extract 98 in Cosphaderm® Dicapo natural.
Add phase C and phase D to phase A+B after cooling to 40 °C while stirring. Adjust the pH to 5.5 ± 0.05.

SPECIFICATION
Appearance: Light beige, shiny, fluid emulsion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

ULTRA HYDRATING SERUM ALL NATURAL INGREDIENTS

100.106.1.1

ANTI-AGING. REGENERATING. SMOOTHING.

Alternative preservation: Cosphaderm® MultiMEG

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	83.10
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	5.00
A	Cosphaderm® PA-12	Sodium Phytate	Cosphatec GmbH	0.10
A	Cosphaderm® X soft	Xanthan Gum	Cosphatec GmbH	0.40
A	Cosphaderm® Sodium Hyaluronate high	Sodium Hyaluronate	Cosphatec GmbH	0.20
A	Cosphaderm® Sodium Hyaluronate low	Sodium Hyaluronate	Cosphatec GmbH	0.10
B	Olivem® 1000	Cetearyl OlivateSorbitan Olivate	Hallstar	2.50
B	MCT Oil Typ V Ph. Eur.	Caprylic/Capric Triglyceride	Gustav Heess GmbH	5.00
B	Grape Seed Oil	Vitis Vinifera Seed Oil	Gustav Heess GmbH	2.00
B	Cosphaderm® T-70 NON GMO ECO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.20
C	Cosphaderm® MultiMEG	Glyceryl CaprylatePentylene GlycolMagnolia Officinalis Bark Extract	Cosphatec GmbH	1.40

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Heat to 75 °C.
Phase B: Combine all ingredients and heat to 75 °C. Add then phase B to phase A under strong stirring and homogenise.
Phase C: Add phase C to the formulation and stir.
Adjust the pH to 5.5 ± 0.05.

SPECIFICATION
Appearance: White, fluid emulsion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

ANTI-WRINKLE EYE CREAM ALL NATURAL INGREDIENTS

100.49.1.1

MOISTURISING. NURTURING. ANTI-AGEING.

Preservation: Cosphagard® Pol

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	72.70
A	Cosphaderm® Sodium Hyaluronate low	Sodium Hyaluronate	Cosphatec GmbH	0.20
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.50
A	Cosphagard® Pol	AquaSodium LevulinatePotassium Sorbate	Cosphatec GmbH	2.00
B	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	3.00
B	Sesame Oil	Sesamum Indicum Seed Oil	Gustav Heess GmbH	4.00
B	Evening Primrose Oil	Oenothera Biennis Oil	Gustav Heess GmbH	3.00
B	Jojoba Oil	Simmondsia Chinensis Seed Oil	Gustav Heess GmbH	3.00
B	Shea Butter refined	Butyrospermum Parkii Butter	Gustav Heess GmbH	3.00
B	Wheat Germ Oil	Triticum Vulgare Oil	Gustav Heess GmbH	2.00
B	Almond Oil	Prunus Amygdalus Dulcis Oil	Gustav Heess GmbH	2.00
B	Imwitor 960 K	Glyceryl Stearate SE	IOI Oleo GmbH	3.00
B	Cosphaderm® T-70 NON GMO ECO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.10
B	Lanette® O	Cetearyl Alcohol	BASF SE	0.50
B	Cosphaderm® GS Connect	Glyceryl Stearate Citrate	Cosphatec GmbH	1.00

Manufacturing Process
Phase A: Combine all ingredients of phase A under stirring until Cosphaderm® X 34 is completely dissolved.
Phase B: Combine all ingredients of phase B.
Heat both phases separately to 70 °C and add phase B to phase A under stirring.
After stirring homogenise the formulation and adjust the pH to 5.5 ± 0.05.

Specification
Appearance: White, shiny, low viscous emulsion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

DAILY FACIAL CREAM ALL NATURAL INGREDIENTS

100.59.1.1

MOISTURISING. CARING. HYDRATING.

Preservation: Cosphagard® Pol

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	74.50
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	3.00
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.50
A	Cosphagard® Pol	AquaSodium LevulinatePotassium Sorbate	Cosphatec GmbH	1.50
B	Cosphaderm® Feel	Triheptanoin	Cosphatec GmbH	5.00
B	Cosphaderm® GS Connect	Glyceryl Stearate Citrate	Cosphatec GmbH	2.50
B	Witarix® 60/40	Caprylic/Capric Triglyceride	IOI Oleo GmbH	5.00
B	Softisan® 154	Hydrogenated Palm Oil	IOI Oleo GmbH	1.00
B	Shea Butter refined	Butyrospermum Parkii Butter	Gustav Heess GmbH	5.00
B	Ecorol® 16/98 P	Cetyl Alcohol	Ecogreen Oleochemicals	2.00

Manufacturing Process
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Combine all ingredients of phase B.
Heat both phases separately to 70 °C and add phase B to A while stirring very fast. Homogenise.
Adjust the pH to 5.5 ± 0.05.

Specification
Appearance: White, high viscous cream
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

HAPPY BARRIER CREAM ALL NATURAL INGREDIENTS

100.90.1.1

HYDRATING. NOURISHING. SKIN BARRIER ENHANCING.

Alternative preservation: Cosphaderm® Absolute, Cosphaderm® GMCY, Cosphaderm® Magnolia Extract 98

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	53.70
A	Cosphaderm® X soft	Xanthan Gum	Cosphatec GmbH	0.60
B	Cosphaderm® Absolute	PropanediolSodium LactateBetaineAqua	Cosphatec GmbH	20.00
C	Cosphaderm® SF-75H	Hydrogenated Lecithin	Cosphatec GmbH	1.00
D	Cosphaderm® GS Connect	Glyceryl Stearate Citrate	Cosphatec GmbH	2.00
D	Lanette® O	Cetearyl Alcohol	BASF SE	2.00
D	Behenyl Alcohol	Behenyl Alcohol	-	2.50
D	Shea Butter refined	Butyrospermum Parkii Butter	Gustav Heess GmbH	5.00
D	Cosphaderm® GMCY	Glyceryl Caprylate	Cosphatec GmbH	0.30
D	Jojoba Oil	Simmondsia Chinensis Seed Oil	Gustav Heess GmbH	3.50
D	MCT Oil Typ V Ph. Eur.	Caprylic/Capric Triglyceride	Gustav Heess GmbH	5.00
D	Squalane	Squalane	-	4.00
D	Cosphaderm® T-70 NON GMO ECO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.20
E	Cosphaderm® Magnolia Extract 98	Magnolia Officinalis Bark Extract	Cosphatec GmbH	0.20

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Add phase B to A while stirring.
Phase C: Add phase C to the water phase while stirring. Then heat the water phase to 70-75 °C.
Phase D: Combine all ingredients of phase D and heat to 75°C. Phase E is added to the oil phase just before emulsion is formed.
Add phase D+E to the water phase while stirring. Homogenise at 40°C.
Adjust the pH to 5.5 ± 0.05.

SPECIFICATION
Appearance: Light beige, high viscous cream
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

INTENSE MOISTURISING CREAM ALL NATURAL INGREDIENTS

100.109.2.1

ANTI-AGING. HYDRATING. SMOOTHING.

Alternative preservation: Cosphaderm® Dicapo natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	69.60
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	4.00
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.50
A	Cosphaderm® Sodium Hyaluronate	Sodium Hyaluronate	Cosphatec GmbH	0.20
B	Cosphaderm® GS Connect	Glyceryl Stearate Citrate	Cosphatec GmbH	2.50
B	Lanette® O	Cetearyl Alcohol	BASF SE	3.00
B	Cutina® GMS V	Glyceryl Stearate	BASF SE	2.00
B	Shea Butter	Butyrospermum Parkii Butter	Gustav Heess GmbH	5.00
B	MCT Oil Typ V Ph. Eur.	Caprylic/Capric Triglyceride	Gustav Heess GmbH	7.00
B	Grape Seed Oil	Vitis Vinifera Seed Oil	Gustav Heess GmbH	3.00
B	Cetiol® OE	Dicaprylyl Ether	BASF SE	2.00
B	Cosphaderm® T-70 NON GMO ECO CC	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.20
C	Cosphaderm® Dicapo natural	Caprylyl GlycolPropanediolGlyceryl Caprylate	Cosphatec GmbH	1.00

SPECIFICATION
Appearance: White, high viscous emulsion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

MATTIFYING DAY CREAM ALL NATURAL INGREDIENTS

100.69.1.1

MOISTURISING. QUICKLY ABSORBING. LIGHT GEL CREAM TEXTURE.

Alternative preservation: Cosphaderm® Zinc Lactate natural, Cosphaderm® GeMix

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	76.30
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	3.00
A	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	2.00
A	Cosphaderm® Zinc Lactate natural	Zinc Lactate	Cosphatec GmbH	0.50
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.30
B	PolyAquol®-2W	Polyglyceryl-2 StearateGlyceryl StearateStearyl Alcohol	Innovacos	4.00
B	Lanette® O	Cetearyl Alcohol	BASF SE	2.50
B	Cosphaderm® Feel	Triheptanoin	Cosphatec GmbH	3.00
B	MCT Oil Typ V Ph. Eur.	Caprylic/Capric Triglyceride	Gustav Heess GmbH	4.00
B	Sunflower Oil	Helianthus Annuus Seed Oil	Gustav Heess GmbH	3.00
B	Cosphaderm® GeMix	Glyceryl CaprylateGlyceryl Undecylenate	Cosphatec GmbH	1.20
B	Cosphaderm® T-70 NON GMO ECO	Helianthus Annuus Seed OilTocopherol	Cosphatec GmbH	0.20

SPECIFICATION
Appearance: White, viscous gel cream
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

MINIMALIST FACE MOISTURISER ALL NATURAL INGREDIENTS

100.99.2.1

CLEAN BEAUTY. MINIMALIST FORMULATION. HYDRATING.

Alternative preservation: Cosphaderm® Zinc Lactate natural, Cosphaderm® GMUD, Cosphaderm® Magnolia Extract 98

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	71.50
A	Cosphaderm® Zinc Lactate natural	Zinc Lactate	Cosphatec GmbH	0.50
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.50
B	Cosphaderm® GS Connect	Glyceryl Stearate Citrate	Cosphatec GmbH	3.50
B	Lanette® 16	Cetyl Alcohol	BASF SE	3.00
B	Cosphaderm® GMUD	Glyceryl Undecylenate	Cosphatec GmbH	0.60
B	Shea Butter refined	Butyrospermum Parkii Butter	Gustav Heess GmbH	8.00
B	Sunflower Oil	Helianthus Annuus Seed Oil	Gustav Heess GmbH	12.00
B	Cosphaderm® T-70 NON GMO ECO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.20
C	Cosphaderm® Magnolia Extract 98	Magnolia Officinalis Bark Extract	Cosphatec GmbH	0.20

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Heat the water phase to 70-75 °C.
Phase B: Combine all ingredients of phase B and heat to 75°C. Phase C is added to the oil phase just before emulsion is formed.
Add phase B+C to the water phase while stirring. Homogenise at 40°C.
Adjust the pH to 5.5 ± 0.05.

SPECIFICATION
Appearance: White, high viscous cream
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

MOISTURE MAGNET CREAM ALL NATURAL INGREDIENTS

100.114.1.1

HYDRATING. RADIANT. SKIN PROTECTING.

Alternative preservation: Cosphaderm® Sodium LAAS, Cosphaderm® GMCY, Cosphaderm® Magnolia Extract 98

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	70.95
A	Cosphaderm® Sodium LAAS	Sodium LevulinateSodium Anisate	Cosphatec GmbH	1.00
A	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	4.00
A	Cosphaderm® X soft	Xanthan Gum	Cosphatec GmbH	0.60
B	Cosphaderm® SF-75H	Hydrogenated Lecithin	Cosphatec GmbH	0.75
C	Cosphaderm® GS Connect	Glyceryl Stearate Citrate	Cosphatec GmbH	2.00
C	Lanette® O	Cetearyl Alcohol	BASF SE	1.50
C	Behenyl Alcohol	Behenyl Alcohol	-	1.00
C	Shea Butter refined	Butyrospermum Parkii Butter	Gustav Heess GmbH	5.00
C	Cosphaderm® GMCY	Glyceryl Caprylate	Cosphatec GmbH	0.30
C	Jojoba Oil	Simmondsia Chinensis Seed Oil	Gustav Heess GmbH	3.50
C	MCT Oil Typ V Ph. Eur.	Caprylic/Capric Triglyceride	Gustav Heess GmbH	5.00
C	Squalane	Squalane	-	4.00
D	Cosphaderm® Magnolia Extract 98	Magnolia Officinalis Bark Extract	Cosphatec GmbH	0.10
E	Cosphaderm® Tocopharin	Carnosic AcidTocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.30

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Add phase B to A while stirring. Then heat the water phase to 70-75 °C.
Phase C: Combine all ingredients of phase C and heat to 75°C. Phase D is added to the oil phase just before emulsion is formed.
Add phase C+D to the water phase while stirring. Homogenise at 40°C.
Add phase E to the emulsion.
Adjust the pH to 5.5 ± 0.05.

SPECIFICATION
Appearance: Light beige, white cream
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

MOISTURISING DAYCREAM

100.1.1.1

RICH SKIN FEEL. QUICKLY ABSORBING. HYDRATING.

Alternative preservation: Cosphaderm® Dicapo

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	84.50
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	3.00
A	Cosphaderm® PA ECONAT	Phytic AcidAqua	Cosphatec GmbH	0.10
B	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.20
B	Aristoflex® AVC	Ammonium Acryloyldimethyltaurate/ VP Copolymer	Clariant AG	1.00
C	Cosphaderm® E NGM	Lysolecithin	Cosphatec GmbH	1.50
C	Cegesoft® SH	Shorea Stenoptera Seed Butter	BASF SE	2.50
C	Sunflower Oil	Helianthus Annuus Seed Oil	Gustav Heess GmbH	2.00
C	Jojoba Oil	Simmondsia Chinensis Seed Oil	Gustav Heess GmbH	2.00
C	Softisan® 154	Hydrogenated Palm Oil	IOI Oleo GmbH	1.00
C	Cosphaderm® AP	Ascorbyl Palmitate	Cosphatec GmbH	0.20
C	Cosphaderm® T-70 NON GMO ECO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.30
C	Cosphaderm® Feel	Triheptanoin	Cosphatec GmbH	1.00
D	Cosphaderm® Dicapo	Caprylyl GlycolGlyceryl CaprylateDipropylene Glycol	Cosphatec GmbH	0.70

Manufacturing Process
Phase A: Mix all ingredients together.
Phase B: Slowly add Cosphaderm® X 34 and Aristoflex® AVC under stirring to phase A. Continue stirring until complete dissolution. Then heat to 80 °C.
Phase C: Mix all ingredients and heat to 80 °C. Add phase C to phase A+B and homogenise.
Phase D: Add Cosphaderm® Dicapo below 40 °C under stirring.
Adjust the pH to 5.5 ± 0.05.

Specification
Appearance: Light beige, shiny, viscous emulsion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

MOISTURISING MAGNOLIA CREAM GEL ALL NATURAL INGREDIENTS

100.13.1.2

ACTIVE AGAINST ACNE. NOURISHING. LIGHT AND SOFT TEXTURE.

Alternative preservation: Cosphaderm® Pentiol natural, Cosphaderm® Propanediol natural, Cosphaderm® Magnolia Extract 98

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	77.80
A	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	4.00
A	Cosphaderm® Pentiol natural	Pentylene Glycol	Cosphatec GmbH	5.00
A	Sodium PCA	Sodium PCA	-	0.50
B	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	3.00
B	Cosphaderm® KG	Amorphophallus Konjac Root Extract	Cosphatec GmbH	0.80
C	Cosphaderm® SF-75H	Hydrogenated Lecithin	Cosphatec GmbH	1.00
D	Imwitor® 375	Glyceryl CitrateLactateLineolateOleate	IOI Oleo GmbH	0.50
D	Shea Butter refined	Butyrospermum Parkii Butter	Gustav Heess GmbH	1.00
D	Babassu Oil	Orbignya Oleifera Seed Oil	Gustav Heess GmbH	2.00
D	Macadamia Nut Oil	Macadamia Ternifolia Seed Oil	Gustav Heess GmbH	2.00
D	Cosphaderm® Feel	Triheptanoin	Cosphatec GmbH	2.00
D	Cosphaderm® Magnolia Extract 98	Magnolia Officinalis Bark Extract	Cosphatec GmbH	0.20
D	Cosphaderm® T-70 NON GMO ECO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.20

Manufacturing Process
Phase A: Combine all ingredients of phase A.
Phase B: Disperse Cosphaderm® KG in glycerol and add it to phase A. Stir until completely dissolved.
Phase C: Add phase C and stir until everything is homogeneous.
Phase D: Prepare phase D and melt at 50 °C, then cool down to room temperature.
Add phase D to the water phase and homogenise.
Adjust pH to 5.5 ± 0.05.

Specification
Appearance: Shiny, viscous emulsion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

RICH NIGHT MOISTURISER

100.6.1.1

ANTI-POLLUTION. NOURISHING. ANTI-AGEING.

Alternative preservation: Cosphaderm® Hexiol, Cosphaderm® Propanediol natural, Cosphaderm® Octiol

PHASE	Ingredient	INCI	SUPPLIER	%
A	Cosphaderm® Hexiol	1,2-Hexanediol	Cosphatec GmbH	1.00
A	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	3.00
A	Cosphaderm® Octiol	Caprylyl Glycol	Cosphatec GmbH	0.40
B	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.20
B	Cosphaderm® Sodium Hyaluronate	Sodium Hyaluronate	Cosphatec GmbH	0.20
C	Demin. Water	Aqua	-	67.00
D	Cosphaderm® Feel	Triheptanoin	Cosphatec GmbH	8.00
D	Sesame Oil	Sesamum Indicum Seed Oil	Gustav Heess GmbH	5.00
D	Avocado Oil	Persea Gratissima Oil	Gustav Heess GmbH	3.00
D	Rosehip Seed Oil	Rosa Canina Fruit Oil	Gustav Heess GmbH	2.00
D	Shea Butter refined	Butyrospermum Parkii Butter	Gustav Heess GmbH	1.50
D	Cocoa Butter	Theobroma Cacao Seed Butter	Gustav Heess GmbH	1.50
D	Lamecreme	Glyceryl StearateGlyceryl Stearate Citrate	-	4.00
D	Ecorol® 16/98 P	Cetyl Alcohol	Ecogreen Oleochemicals	1.50
D	Cosphaderm® E-1000Ac NON GMO	Tocopherol AcetateHelianthus Annuus Seed Oil	Cosphatec GmbH	0.50
D	Cosphaderm® T-70 NON GMO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.20
E	Demin. Water	Aqua	-	0.50
E	Cosphaderm® Panthenol natural	Panthenol	Cosphatec GmbH	1.00

Manufacturing Process
Phase A: Mix phase A and stir until everything is completely dissolved.
Phase B: Add phase B to phase A and stir until dispersed.
Phase C: Slowly add phase C to phase A+B and stir until complete dissolution.
Phase D: Mix all ingredients of phase D and heat phase A+B+C and D separately to 80 °C.
Add phase D slowly to phase A+B+C while stirring.
Phase E: Dissolve Cosphaderm® Panthenol natural in water and add to the finished formulation (below 40 °C).
Adjust the pH to 5.5 ± 0.05.

Specification
Appearance: Shiny, fluid emulsion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

URBAN ANTI-POLLUTION SKIN ELIXIR

100.18.2.1

ANTI-POLLUTION. HIGH SPREADABILITY. ANTI-AGEING.

Alternative preservation: Cosphaderm® Propanediol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	64.30
A	Cosphaderm® Sodium Hyaluronate	Sodium Hyaluronate	Cosphatec GmbH	0.10
A	Cosphaderm® Sodium Hyaluronate low	Sodium Hyaluronate	Cosphatec GmbH	0.10
A	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	10.00
A	Cosphaderm® X soft	Xanthan Gum	Cosphatec GmbH	0.50
A	Cosphaderm® Leo	Dipropylene GlycolEthylhexylglycerinCaprylhydroxamic Acid	Cosphatec GmbH	2.70
B	Cosphaderm® SF-75H	Hydrogenated Lecithin	Cosphatec GmbH	3.00
B	Ecorol® 16/98 P	Cetyl Alcohol	Ecogreen Oleochemicals	1.00
B	Cosphaderm® Feel	Triheptanoin	Cosphatec GmbH	4.00
B	Babassu Oil	Orbignya Oleifera Seed Oil	Gustav Heess GmbH	4.00
B	Apricot Kernel Oil	Prunus Armeniaca Kernel Oil	Gustav Heess GmbH	4.00
B	Sesame Oil	Sesamum Indicum Seed Oil	Gustav Heess GmbH	3.00
B	Evening Primrose Oil	Oenothera Biennis Oil	Gustav Heess GmbH	1.00
B	Rosehip Seed Oil	Rosa Canina Fruit Oil	Gustav Heess GmbH	1.00
B	Grape Seed Oil	Vitis Vinifera Seed Oil	Gustav Heess GmbH	1.00
B	Cosphaderm® T-70 NON GMO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.20
B	Cosphaderm® E-1000 NON GMO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.10

Manufacturing Process
Phase A: Prepare phase A and stir until complete dissolution.
Phase B: Prepare phase B and heat to 50 °C until everything is melted. Let the mixture cool down to room temperature.
Add phase B to phase A and homogenise.
Adjust the pH to 5.5 ± 0.05.

Specification
Appearance: White, viscous emulsion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

VITALISING SKIN GEL (A) ALL NATURAL INGREDIENTS

100.28.2.1

QUICKLY ABSORBING. RICH SKIN FEEL. HYDRATING.

Alternative preservation: Cosphaderm® LA-T, Cosphaderm® Sodium pAS natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	82.20
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	4.00
A	Cosphaderm® X soft	Xanthan Gum	Cosphatec GmbH	1.00
A	Cosphaderm® Sodium Hyaluronate low	Sodium Hyaluronate	Cosphatec GmbH	0.20
A	Cosphaderm® LA-T	Levulinic AcidGlycerinSodium LevulinateAqua	Cosphatec GmbH	1.20
B	Cosphaderm® Sodium pAS natural	Sodium Anisate	Cosphatec GmbH	0.40
C	Cosphaderm® SF-75H	Hydrogenated Lecithin	Cosphatec GmbH	3.50
C	Sunflower Oil	Helianthus Annuus Seed Oil	Gustav Heess GmbH	5.00
C	Jojoba Oil	Simmondsia Chinensis Seed Oil	Gustav Heess GmbH	2.50

Manufacturing Process
Phase A: Prepare phase A and stir until everything is completely dissolved. Adjust pH value to 5.5.
Phase B: Add Cosphaderm® Sodium pAS natural to phase A under stirring.
Phase C: Prepare phase C and add it to phase A/B. Homogenise.
Adjust pH value to 5.5 ± 0.05.

Specification
Appearance: Beige, shiny, low viscous emulsion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

VITALISING SKIN GEL (B) ALL NATURAL INGREDIENTS

100.28.3.1

QUICKLY ABSORBING. RICH SKIN FEEL. HYDRATING.

Alternative preservation: Cosphaderm® LA-T, Cosphaderm® pAS natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	82.20
A	Cosphaderm® pAS natural	p-Anisic Acid	Cosphatec GmbH	0.40
A	Cosphaderm® LA-T	Levulinic AcidGlycerinSodium LevulinateAqua	Cosphatec GmbH	1.20
B	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	4.00
B	Cosphaderm® X soft	Xanthan Gum	Cosphatec GmbH	1.00
B	Cosphaderm® Sodium Hyaluronate low	Sodium Hyaluronate	Cosphatec GmbH	0.20
C	Cosphaderm® SF-75H	Hydrogenated Lecithin	Cosphatec GmbH	3.50
C	Sunflower Oil	Helianthus Annuus Seed Oil	Gustav Heess GmbH	5.00
C	Jojoba Oil	Simmondsia Chinensis Seed Oil	Gustav Heess GmbH	2.50

Manufacturing Process
Phase A: Prepare phase A. Raise the pH to 10 to dissolve Cosphaderm® pAS natural and stir until everything is completely dissolved. Afterwards, adjust the pH to 5.5 ± 0.05 by adding Citric Acid.
Phase B: Prepare phase B and add it to phase A while stirring. Stir until everything is completely dissolved.
Phase C: Prepare phase C and add it to phase A/B. Homogenise.
Adjust pH value to 5.5 ± 0.05.

VITALISING SKIN GEL (C)

100.28.4.1

QUICKLY ABSORBING. RICH SKIN FEEL. HYDRATING.

Alternative preservation: Cosphaderm® LA-T, Cosphaderm® AS

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	82.20
A	Cosphaderm® AS	p-Anisic Acid	Cosphatec GmbH	0.40
A	Cosphaderm® LA-T	Levulinic AcidGlycerinSodium LevulinateAqua	Cosphatec GmbH	1.20
B	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	4.00
B	Cosphaderm® X soft	Xanthan Gum	Cosphatec GmbH	1.00
B	Cosphaderm® Sodium Hyaluronate low	Sodium Hyaluronate	Cosphatec GmbH	0.20
C	Cosphaderm® SF-75H	Hydrogenated Lecithin	Cosphatec GmbH	3.50
C	Sunflower Oil	Helianthus Annuus Seed Oil	Gustav Heess GmbH	5.00
C	Jojoba Oil	Simmondsia Chinensis Seed Oil	Gustav Heess GmbH	2.50

Manufacturing Process
Phase A: Prepare phase A. Raise the pH to 10 to dissolve Cosphaderm® AS natural and stir until everything is completely dissolved. Afterwards, adjust the pH to 5.5 ± 0.05 by adding Citric Acid.
Phase B: Prepare phase B and add it to phase A while stirring. Stir until everything is completely dissolved.
Phase C: Prepare phase C and add it to phase A/B. Homogenise.
Adjust pH value to 5.5 ± 0.05.

BLACK PEELING MASK ALL NATURAL INGREDIENTS

100.26.2.2

PURIFYING. DETOXIFYING. MATTIFYING.

Alternative preservation: Cosphaderm® LA-T, Cosphaderm® Magnolia Extract 98

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	53.95
A	Plantacare® 818 UP	Coco Glucoside	BASF SE	3.00
A	Cinnamic Acid	Cinnamic Acid	-	0.30
A	Cosphaderm® LA-T	Levulinic AcidGlycerinSodium LevulinateAqua	Cosphatec GmbH	1.20
B	Kaolin	Kaolin	-	10.00
B	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	8.00
B	Charcoal Powder	Charcoal Powder	-	2.85
B	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.40
C	PolyAquol®-2W	Polyglyceryl-2 StearateGlyceryl StearateStearyl Alcohol	Innovacos	2.50
C	Mango Butter	Mangifera Indica Seed Butter	-	6.00
C	Beeswax	Cera alba	Gustav Heess GmbH	2.50
C	Lanette® 16	Cetyl Alcohol	Ecogreen Oleochemicals	2.00
C	Cosphaderm® Feel	Triheptanoin	Cosphatec GmbH	1.00
C	Cosphaderm® T-70 NON GMO ECO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.10
D	Cosphaderm® Magnolia Extract 98	Magnolia Officinalis Bark Extract	Cosphatec GmbH	0.20
D	Kaolin	Kaolin	-	5.00
D	Lipo® AMS	Prunus Amygdalus Dulcis Seed Meal	Vantage Speciality Ingredients, Inc.	1.00

Manufacturing Process
Phase A: Combine all ingredients of phase A and raise the pH to 11 to dissolve the cinnamic acid completely. Afterwards, adjust the pH to 5.5 ± 0.05 by adding Citric Acid.
Phase B: Add phase B to phase A while stirring. Stir until everything is completely dissolved.
Phase C: Prepare phase C and heat both phases separately to 75 °C.
Add phase C to phase A/B under stirring and homogenise the mixture.
Phase D: Add phase D to the formulation.
Adjust the pH to 5.5 ± 0.05.

Specification
Appearance: Black, creamy paste with small exfoliants
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

CALMING HYDRO MASK ALL NATURAL INGREDIENTS

100.104.1.1

SOOTHING. MOISTURISING. ANTI-BLEMISH.

Alternative preservation: Cosphaderm® Hexiol, Cosphaderm® Zinc Lactate natural, Cosphaderm® Magnolia Extract 98

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	74.65
A	Cosphaderm® Zinc Lactate natural	Zinc Lactate	Cosphatec GmbH	0.50
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	3.00
A	Cosphaderm® Hexiol natural	1,2-Hexanediol	Cosphatec GmbH	2.00
A	Cosphaderm® Sodium Hyaluronate high	Sodium Hyaluronate	Cosphatec GmbH	0.10
A	Cosphaderm® Sodium Hyaluronate low	Sodium Hyaluronate	Cosphatec GmbH	0.10
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.40
B	Olivem® 1000	Cetearyl OlivateSorbitan Olivate	Hallstar	3.00
B	Lanette® 16	Cetyl Alcohol	BASF SE	2.00
B	Macadamia Oil	Macadamia Ternifolia Seed Oil	Gustav Heess GmbH	4.00
B	MCT Oil Typ V Ph. Eur.	Caprylic/Capric Triglyceride	Gustav Heess GmbH	4.00
B	Shea Butter refined	Butyrospermum Parkii Butter	Gustav Heess GmbH	5.00
B	Evening Primrose Oil	Oenothera Biennis Oil	Gustav Heess GmbH	1.00
B	Cosphaderm® T-70 NON GMO ECO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.20
C	Cosphaderm® Magnolia Extract 98	Magnolia Officinalis Bark Extract	Cosphatec GmbH	0.05

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Heat to 70-75 °C.
Phase B: Combine all ingredients of phase B and heat to 75°C. Phase C is added to the oil phase just before emulsion is formed.
Add phase B+C to the water phase while stirring. Homogenise at 40°C.
Adjust the pH to 5.5 ± 0.05.

SPECIFICATION
Appearance: White, viscous cream
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

DEEP HYDRATION SHEET MASK ALL NATURAL INGREDIENTS

100.118.1.1

ANTI-AGEING. MOISTURISING. SOOTHING.

Alternative preservation: Cosphaderm® Hexiol natural, Cosphaderm® Sodium pAS natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	87.10
A	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	4.00
A	Cosphaderm® Hexiol natural	1,2-Hexanediol	Cosphatec GmbH	2.00
A	Cosphaderm® Panthenol natural	Panthenol	Cosphatec GmbH	0.50
A	Aloe Vera Powder	Aloe Barbadensis Leaf Juice Powder	Worlée-Chemie GmbH	0.10
A	Ronacare® Allantoin	Allantoin	Merck KGaA	0.20
A	Cosphaderm® Sodium pAS natural	Sodium Anisate	Cosphatec GmbH	0.30
B	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	5.00
B	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.50
B	Cosphaderm® Sodium Hyaluronate high	Sodium Hyaluronate	Cosphatec GmbH	0.20
B	Cosphaderm® Sodium Hyaluronate low	Sodium Hyaluronate	Cosphatec GmbH	0.10

ELASTIC JELLY MASK ALL NATURAL INGREDIENTS

100.20.1.1

MOISTURISING. SOOTHING. CALMING.

Alternative preservation: Cosphaderm® Pentiol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	82.30
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	4.00
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.60
A	Cosphaderm® KG	Amorphophallus Konjak Root Extract	Cosphatec GmbH	0.60
A	Cosphaderm® Pentiol natural	Pentylene Glycol	Cosphatec GmbH	5.00
B	Cosphaderm® SF-75H	Hydrogenated Lecithin	Cosphatec GmbH	2.50
B	Jojoba Oil	Simmondsia Chinensis Seed Oil	Gustav Heess GmbH	5.00

Manufacturing Process
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Add all ingredients and to phase A and homogenise.
Adjust the pH to 5.5 ± 0.05.
Heat the mixture to its boiling point and keep this temperature for 2 – 3 minutes (Warning: Lecithins are heat sensitive. Therefore, the process of heating should be kept to a minimum!).
Quickly pour the hot mixture into a casting mould and let it cool.

Specification
Appearance: White to off-white, elastic jelly patch
pH: 5.5 ± 0.05
Stability: Stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

FACE SHEET MASK

100.27.1.1

ANTI-WRINKLE. MOISTURISING. HYDRATING.

Alternative preservation: Cosphaderm® Propanediol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	84.65
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	8.00
A	Cosphaderm® Leo	Dipropylene GlycolEthylhexylglycerinCaprylhydroxamic Acid	Cosphatec GmbH	2.00
A	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	5.00
B	Cosphaderm® Sodium Hyaluronate	Sodium Hyaluronate	Cosphatec GmbH	0.05
B	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.20
B	Carbopol® Ultrez 21 Polymer	Acrylates/C10-30 Alkyl Acrylate Crosspolymer	Lubrizol	0.10

Manufacturing Process
Phase A: Combine all ingredients.
Phase B: Prepare phase B and slowly add to phase A under stirring. Continue stirring until everything is completely dissolved.
Adjust pH to 6.5 ± 0.05 if necessary.

Specification
Appearance: Translucent, low viscous serum
pH: 6.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

HYDRO JELLY MASK

100.21.3.1

HYDRATING. RELAXING. CALMING.

Alternative preservation: Cosphaderm® Hexiol, Cosphaderm® Pentiol GL, Cosphaderm® Propanediol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	82.80
A	Cosphaderm® Hexiol	1,2-Hexanediol	Cosphatec GmbH	1.00
A	Cosphaderm® Pentiol GL	Pentylene Glycol	Cosphatec GmbH	5.00
B	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	5.00
B	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	5.00
B	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.50
B	Cosphaderm® KG	Amorphophallus Konjac Root Extract	Cosphatec GmbH	0.50
B	Cosphaderm® Sodium Hyaluronate low	Sodium Hyaluronate	Cosphatec GmbH	0.20

Manufacturing Process
Phase A: Prepare phase A.
Phase B: Pre-disperse phase B and add to the water phase while stirring. Stir until everything is completely dissolved.
Adjust the pH to 5.5 – 6.0 ± 0.05.
Heat the mixture to its boiling point and keep this temperature for 2 – 3 minutes.
Quickly pour the hot mixture into a casting mould and let it cool.

Specification
Appearance: Transparent or coloured, elastic jelly patch
pH: 5.5 – 6.0 ± 0.05
Stability: Stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

JELLY EYE PATCHES

100.88.1.1

HYDRATING. REFRESHING. ANTI-AGEING.

Alternative preservation: Cosphaderm® Heptiol natural, Cosphaderm® Pentiol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	87.60
A	Cosphaderm® Pentiol natural	Pentylene Glycol	Cosphatec GmbH	4.00
A	Cosphaderm® Heptiol natural	1,2-Heptanediol	Cosphatec GmbH	1.00
B	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	3.00
B	Cosphaderm® Sodium Hyaluronate high	Sodium Hyaluronate	Cosphatec GmbH	0.20
B	Cosphaderm® Sodium Hyaluronate low	Sodium Hyaluronate	Cosphatec GmbH	0.20
B	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.50
B	Cosphaderm® KG	Amorphophallus Konjac Root Extract	Cosphatec GmbH	0.50
B	RonaCare® Nicotinamide	Niacinamide	Merck KGaA	3.00

MANUFACTURING PROCESS
Phase A: Prepare phase A.
Phase B: Pre-disperse phase B and add to the water phase while stirring. Stir until everything is completely dissolved.
Adjust the pH to 5.5 – 6.0 ± 0.05.
Heat the mixture to 80-90°C and keep this temperature for 2 – 3 minutes.
Quickly pour the hot mixture into moulds and let it cool down.

SPECIFICATION
Appearance: Transparent or coloured, elastic jelly patch
pH: 5.5 – 6.0 ± 0.05
Stability: Stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

RICH & NATURAL W/O CREAM ALL NATURAL INGREDIENTS

100.71.2.1

REGENERATING. PROTECTING. SOFT TEXTURE.

Alternative preservation: Cosphaderm® LA-T, Cosphaderm® pAS natural, Cosphaderm® Pentiol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	70.60
A	Cosphaderm® pAS natural	p-Anisic Acid	Cosphatec GmbH	0.20
A	Cosphaderm® LA-T	Levulinic AcidGlycerinSodium LevulinateAqua	Cosphatec GmbH	1.40
B	Cosphaderm® Pentiol natural	Pentylene Glycol	Cosphatec GmbH	1.50
B	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	3.00
B	Magnesium Sulfate	Magnesium Sulfate	-	0.70
C	Imwitor® 600	Polyglyceryl-3 Polyricinoleate	IOI Oleo GmbH	3.00
C	Candellila Wax	Euphorbia Cerifera (Candelilla) Wax	-	0.60
C	Lanette® O	Cetearyl Alcohol	BASF SE	1.00
C	MCT Oil Typ V Ph. Eur.	Caprylic/Capric Triglyceride	Gustav Heess GmbH	7.00
C	Almond Oil	Prunus Amygdalus Dulcis Oil	Gustav Heess GmbH	5.00
C	Jojoba Oil	Simmondsia Chinensis Seed Oil	Gustav Heess GmbH	2.00
C	Miglyol® Coco 810	Coco-Caprylate / Caprate	IOI Oleo GmbH	3.50
D	Cosphaderm® Tapmix	LecithinHelianthus Annuus Seed OilTocopherolAscorbyl Palmitate	Cosphatec GmbH	0.50

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and raise the pH to 10 to dissolve Cosphaderm® pAS natural. Stir until everything is completely dissolved. Afterwards, adjust the pH to 6.0 ±0.2 by adding Citric Acid.
Phase B: Add all ingredients of phase B to phase A and adjust the pH to 5.5 ± 0.05.
Phase C: Combine all ingredients and heat to 80 °C. Then add phase A/B to phase C while homogenising.
Add phase D to the finished formulation and homogenise.

SPECIFICATION
Appearance: White, slightly beige, high viscous cream
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

BEAUTY OIL ALL NATURAL INGREDIENTS

100.19.1.1

SILKY SKIN FEEL. NOURISHING. ANTIOXIDANT.

Oil protection: Cosphaderm® T-70 NON GMO, Cosphaderm® Magnolia Extract 98

PHASE	Ingredient	INCI	SUPPLIER	%
A	Almond Oil	Prunus Amygdalus Dulcis Oil	Gustav Heess GmbH	40.00
A	Rosehip Seed Oil	Rosa Canina Fruit Oil	Gustav Heess GmbH	3.00
A	Jojoba Oil	Simmondsia Chinensis Seed Oil	Gustav Heess GmbH	45.00
A	Evening Primrose Oil	Oenothera Biennis Oil	Gustav Heess GmbH	2.60
A	Pomegranate Seed Oil	Punica Granatum Seed Oil	Gustav Heess GmbH	4.00
A	Grape Seed Oil	Vitis Vinifera Seed Oil	Gustav Heess GmbH	5.00
A	Cosphaderm® T-70 NON GMO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.20
A	Cosphaderm® Magnolia Extract 98	Magnolia Officinalis Bark Extract	Cosphatec GmbH	0.20

Manufacturing Process
Phase A: Combine all ingredients and stir until everything is homogeneous.

Specification
Appearance: Yellow liquid oil
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven (Water activity value less than 0.75)

BOOSTING GLOW MIST

100.35.1.1

REFRESHING. SKIN BOOSTING. TWO-PHASE SYSTEM.

Alternative preservation: Cosphaderm® Propanediol natural, Cosphaderm® Hexiol

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	76.05
A	Aloe Vera Powder	Aloe Barbadensis Leaf Juice Powder	-	0.05
A	RonaCare® Nicotinamide	Niacinamide	Merck KGaA	3.50
A	Cosphaderm® Sodium Hyaluronate low	Sodium Hyaluronate	Cosphatec GmbH	0.20
A	Cosphaderm® Panthenol natural	Panthenol	Cosphatec GmbH	1.00
A	Cosphaderm® Hexiol	1,2-Hexanediol	Cosphatec GmbH	1.50
A	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	5.00
A	Cosphaderm® PA ECONAT	Phytic AcidAqua	Cosphatec GmbH	0.10
B	Olive Oil	Olea Europaea Fruit Oil	Gustav Heess GmbH	3.50
B	Argan Oil	Argania Spinosa Kernel Oil	Gustav Heess GmbH	2.50
B	Avocado Oil	Persea Gratissima Oil	Gustav Heess GmbH	2.00
B	Evening Primrose Oil	Oenothera Biennis Oil	Gustav Heess GmbH	1.50
B	Rosehip Seed Oil	Rosa Canina Fruit Oil	Gustav Heess GmbH	1.00
B	Jojoba Oil	Simmondsia Chinensis Seed Oil	Gustav Heess GmbH	1.50
B	Macadamia Nut Oil	Macadamia Ternifolia Seed Oil	Gustav Heess GmbH	0.50
B	Cosphaderm® T-70 NON GMO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.10

Manufacturing Process
Phase A: Combine all ingredients of phase A and stir until complete dissolution.
Adjust the pH value to 5.5 ± 0.05.
Phase B: Prepare phase B in a separate beaker.
Add phase B to phase A without stirring and pour mixture into spray flask.

Specification
Appearance: Liquid two-phase system with oil phase on top of transparent water phase
pH: 5.5 ± 0.05
Stability: Stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

HYDRO BOOST LIP BALM ALL NATURAL INGREDIENTS

100.77.1.1

HYDRATING. NOURISHING. PROTECTING.

Oil protection: Cosphaderm® T-70 NON GMO

PHASE	Ingredient	INCI	SUPPLIER	%
A	Lanette® 16	Cetyl Alcohol	Ecogreen Oleochemicals	15.35
A	Castor Oil	Ricinus Communis Seed Oil	Gustav Heess GmbH	15.00
A	Octyldodecanol	Octyldodecanol	-	20.00
A	Kahlwax 2811	Oryza Sativa Bran Cera	Kahl GmbH & Co. KG	2.00
A	Beeswax	Cera alba	Gustav Heess GmbH	29.00
A	Cosphaderm® Sodium Hyaluronate high	Sodium Hyaluronate	Cosphatec GmbH	0.15
A	Cosphaderm® T-70 NON GMO ECO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.50
A	Shea Butter refined	Butyrospermum Parkii Butter	Gustav Heess GmbH	10.00
A	Jojoba Oil	Simmondsia Chinensis Seed Oil	Gustav Heess GmbH	8.00

MANUFACTURING PROCESS
Combine all ingredients of phase A and heat to 80-85 °C.
When everything has melted, take off heat and fill into packaging.

SPECIFICATION
Appearance: Solid, yellowish balm
Stability: Stable for 3 months at room temperature and 40 °C
Microbiological stability: proven (Water activity value less than 0.75)

NATURAL LIP BALM ALL NATURAL INGREDIENTS

100.33.1.1

BALMY. PROTECTING. NOURISHING.

Alternative preservation: Cosphaderm® Magnolia Extract 98

PHASE	Ingredient	INCI	SUPPLIER	%
A	Almond Oil	Prunus Amygdalus Dulcis Oil	Gustav Heess GmbH	31.70
A	Lanolin	Lanolin	Gustav Heess GmbH	20.00
A	Beeswax	Cera alba	Gustav Heess GmbH	19.00
A	Shea Butter refined	Butyrospermum Parkii Butter	Gustav Heess GmbH	19.00
A	Cocoa Butter	Theobroma Cacao Seed Butter	Gustav Heess GmbH	10.00
A	Cosphaderm® T-70 NON GMO ECO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.10
A	Cosphaderm® Magnolia Extract 98	Magnolia Officinalis Bark Extract	Cosphatec GmbH	0.20

Manufacturing Process
Prepare phase A and heat to 70 °C until fully melted.
Fill into lip balm container and let it cool.

Specification
Appearance: Yellow solid balm
Stability: Stable for 3 months at room temperature and 40 °C
Microbiological stability: proven (Water activity value less than 0.75)

CALM & CARE FLUID ALL NATURAL INGREDIENTS

100.134.2.1

FAST ABSORBING. HYDRATING. REGENERATING.

Alternative preservation: Cosphaderm® Hexiol natural, Cosphaderm® Octiol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	76.10
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	5.00
A	Cosphaderm® Octiol natural	Caprylyl Glycol	Cosphatec GmbH	0.50
A	Cosphaderm® Hexiol natural	1,2-Hexanediol	Cosphatec GmbH	1.00
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.50
A	Cosphaderm® Sodium Hyaluronate	Sodium Hyaluronate	Cosphatec GmbH	0.10
B	Montanov™ 202	Arachidyl AlcoholBehenyl AlcoholArachidyl Glucoside	SEPPIC, S.A.	5.00
B	Bisabolol	Bisabolol	-	0.30
B	Shea Butter refined	Butyrospermum Parkii Butter	Gustav Heess GmbH	3.00
B	MCT Oil Typ V Ph. Eur.	Caprylic/Capric Triglyceride	Gustav Heess GmbH	7.00
C	Demin. Water	Aqua	-	0.50
C	Cosphaderm® Panthenol natural	Panthenol	Cosphatec GmbH	1.00

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Heat to 70-75 °C.
Phase B: Combine all ingredients and heat to 75 °C. Add then phase B to phase A under strong stirring and homogenise.
Phase C: Dissolve Cosphaderm® Panthenol natural in water and add phase C below 40 °C.
Adjust the pH to 5.5 ± 0.05.

SPECIFICATION
Appearance: White viscous fluid
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

VITALISING SKIN GEL WITH COSPHADERM® SB-75H ALL NATURAL INGREDIENTS

100.28.2.3

QUICKLY ABSORBING. RICH SKIN FEEL. HYDRATING.

Alternative preservation: Cosphaderm® LA-T, Cosphaderm® Sodium pAS natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	CREMER OLEO GmbH & Co. KG	59.70
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	4.00
A	Cosphaderm® X soft	Xanthan Gum	Cosphatec GmbH	1.00
A	Cosphaderm® Sodium Hyaluronate low	Sodium Hyaluronate	Cosphatec GmbH	0.20
A	Cosphaderm® LA-T	Levulinic AcidGlycerinSodium LevulinateAqua	Cosphatec GmbH	1.20
B	Cosphaderm® Sodium pAS natural	Sodium Anisate	Cosphatec GmbH	0.40
C	Demin. Water	Aqua	-	22.50
C	Cosphaderm® SB-75H	Hydrogenated Lecithin	Cosphatec GmbH	3.50
C	Sunflower Oil	Helianthus Annuus Seed Oil	Gustav Heess GmbH	5.00
C	Jojoba Oil	Simmondsia Chinensis Seed Oil	Gustav Heess GmbH	2.50

Manufacturing Process
Phase A: Prepare phase A and stir until everything is completely dissolved. Adjust pH value to 5.5.
Phase B: Add Cosphaderm® Sodium pAS natural to phase A under stirring.
Phase C: Prepare phase C and homogenise for 5 minutes with high performance disperser (stator/rotor) at max. speed.
Add phase C to phase A+B in small steps under stirring.
Adjust pH value to 5.5 ± 0.05.

Specification
Appearance: Shiny liquid emulsion
pH: 5.5 ± 0.05
Stability: no separation after centrifugation (4000 rpm, 30 min)

HairCare

SCALP PEELING ALL NATURAL INGREDIENTS

400.93.1.1

EXFOLIATING. HYDRATING. SOOTHING.

Alternative preservation: Cosphaderm® Pentiol natural, Cosphaderm® Zinc Lactate natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	85.70
A	Cosphagard® SA natural	Salicylic Acid	Cosphatec GmbH	2.00
B	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	3.00
B	Cosphaderm® Panthenol natural	Panthenol	Cosphatec GmbH	0.50
B	Cosphaderm® Sodium Hyaluronate	Sodium Hyaluronate	Cosphatec GmbH	0.20
B	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.20
B	Caffeine Powder	Caffeine	-	1.00
B	Betaine	Betaine	Clariant AG	2.00
B	Cosphaderm® Pentiol natural	Pentylene Glycol	Cosphatec GmbH	5.00
B	Cosphaderm® Zinc Lactate natural	Zinc Lactate	Cosphatec GmbH	0.40

MANUFACTURING PROCESS
Phase A: Combine the ingredients of phase A. Raise the pH to 11 to dissolve Cosphagard® SA natural. When everything is dissolved, lower the pH back to 4-5 again.
Phase B: Add all ingredients from phase B one after another.
Adjust the pH to 4.0 ± 0.05.

SPECIFICATION
Appearance: Transparent, low viscous solution
pH: 4.0 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

WARMING SCALP TREATMENT

400.94.1.1

WARMING. HYDRATING. CARING.

Alternative preservation: Cosphaderm® Pentiol natural, Cosphaderm® Propanediol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	67.40
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	5.00
A	Cosphaderm® Panthenol natural	Panthenol	Cosphatec GmbH	0.50
A	Sodium PCA	Sodium PCA	-	1.00
B	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.40
B	Gummi Arabicum	Acacia Senegal Gum	-	0.40
C	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	20.00
C	Cosphaderm® Pentiol natural	Pentylene Glycol	Cosphatec GmbH	5.00
C	Cosphaderm® VBE	Vanillyl Butyl Ether	Cosphatec GmbH	0.30

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Slowly add phase B to A while stirring.
Phase C: Mix all ingredients of phase C and add to phase A+B while stirring.
Adjust the pH to 5.0 ± 0.05.

SPECIFICATION
Appearance: Transparent, low viscous serum
pH: 5.0 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

ANTI-DANDRUFF SHAMPOO (A) ALL NATURAL INGREDIENTS

400.62.1.1

CLEANSING. FOAMING. NATURALLY ACTIVE AGAINST DANDRUFF.

Alternative preservation: Cosphaderm® LA-T, Cosphaderm® Sodium pAS natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	77.45
A	Sodium Coco-Sulfate	Sodium Coco Sulfate	-	10.00
A	Plantacare® 1200 UP	Lauryl Glucoside	BASF SE	4.00
A	Dehyton® K	Cocamidopropyl Betaine	BASF SE	2.00
A	SOFTISAN® conditionHAIR	PCA Glyceryl Oleate	IOI Oleo GmbH	1.00
A	Cosphagard® SA natural	Salicylic Acid	Cosphatec GmbH	3.00
B	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.50
C	Cosphaderm® PA ECONAT	Phytic AcidAqua	Cosphatec GmbH	0.10
C	Cosphaderm® Sodium pAS natural	Sodium Anisate	Cosphatec GmbH	0.20
C	Cosphaderm® LA-T	Levulinic AcidGlycerinSodium LevulinateAqua	Cosphatec GmbH	1.00
D	Sodium Chloride	Sodium Chloride	-	0.75

Manufacturing Process
Phase A: Combine all ingredients of phase A. Heat phase A to 40 °C.Raise the pH to 11 to dissolve Cosphagard® SA natural.
Phase B: Add phase B to A and stir until Cosphaderm® X 34 is completely dissolved.
Phase C: Add phase C under stirring.
Phase D: Add phase D to thicken the formulation.
Adjust the pH to 4.5 ± 0.05.

Specification
Appearance: translucent, yellowish gel
pH: 4.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

ANTI-DANDRUFF SHAMPOO (B) ALL NATURAL INGREDIENTS

400.62.2.1

CLEANSING. FOAMING. NATURALLY ACTIVE AGAINST DANDRUFF.

Alternative preservation: Cosphaderm® LA-T, Cosphaderm® pAS natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	77.45
A	Sodium Coco-Sulfate	Sodium Coco Sulfate	-	10.00
A	Plantacare® 1200 UP	Lauryl Glucoside	BASF SE	4.00
A	Dehyton® K	Cocamidopropyl Betaine	BASF SE	2.00
A	SOFTISAN® conditionHAIR	PCA Glyceryl Oleate	IOI Oleo GmbH	1.00
A	Cosphagard® SA natural	Salicylic Acid	Cosphatec GmbH	3.00
A	Cosphaderm® pAS natural	p-Anisic Acid	Cosphatec GmbH	0.20
B	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.50
C	Cosphaderm® PA ECONAT	Phytic AcidAqua	Cosphatec GmbH	0.10
C	Cosphaderm® LA-T	Levulinic AcidGlycerinSodium LevulinateAqua	Cosphatec GmbH	1.00
D	Sodium Chloride	Sodium Chloride	-	0.75

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A. Heat phase A to 40 °C.Raise the pH to 11 to dissolve Cosphagard® SA natural and Cosphaderm® pAS natural.
Phase B: Add phase B to A and stir until Cosphaderm® X 34 is completely dissolved.
Phase C: Add phase C under stirring.
Phase D: Add phase D to thicken the formulation.
Adjust the pH to 4.5 ± 0.05.

ANTI-DANDRUFF SHAMPOO (C)

400.62.3.1

CLEANSING. FOAMING. NATURALLY ACTIVE AGAINST DANDRUFF.

Alternative preservation: Cosphaderm® LA-T, Cosphaderm® AS

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	77.45
A	Sodium Coco-Sulfate	Sodium Coco Sulfate	-	10.00
A	Plantacare® 1200 UP	Lauryl Glucoside	BASF SE	4.00
A	Dehyton® K	Cocamidopropyl Betaine	BASF SE	2.00
A	SOFTISAN® conditionHAIR	PCA Glyceryl Oleate	IOI Oleo GmbH	1.00
A	Cosphagard® SA natural	Salicylic Acid	Cosphatec GmbH	3.00
A	Cosphaderm® AS	p-Anisic Acid	Cosphatec GmbH	0.20
B	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.50
C	Cosphaderm® PA ECONAT	Phytic AcidAqua	Cosphatec GmbH	0.10
C	Cosphaderm® LA-T	Levulinic AcidGlycerinSodium LevulinateAqua	Cosphatec GmbH	1.00
D	Sodium Chloride	Sodium Chloride	-	0.75

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A. Heat phase A to 40 °C.Raise the pH to 11 to dissolve Cosphagard® SA natural and Cosphaderm® AS.
Phase B: Add phase B to A and stir until Cosphaderm® X 34 is completely dissolved.
Phase C: Add phase C under stirring.
Phase D: Add phase D to thicken the formulation.
Adjust the pH to 4.5 ± 0.05.

CAFFEINE SHAMPOO FOR MEN ALL NATURAL INGREDIENTS

600.55.2.1

NURTURING. VITALISING. BOOSTING HAIR GROWTH.

Preservation: Cosphagard® Pol

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	60.50
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	6.00
A	Natural Caffeine Green	Caffeine	-	1.00
A	Zinc PCA	Zinc PCA	-	0.30
A	Cosphaderm® Panthenol natural	Panthenol	Cosphatec GmbH	1.00
A	Hydrolyzed Wheat Protein	Hydrolyzed Wheat Protein	-	1.00
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	1.00
A	Cosphagard® Pol	AquaSodium LevulinatePotassium Sorbate	Cosphatec GmbH	2.00
B	Plantacare® 1200 UP	Lauryl Glucoside	BASF SE	10.40
B	Plantacare® 818 UP	Coco Glucoside	BASF SE	10.60
B	Dehyton® K	Cocamidopropyl Betaine	BASF SE	3.20
B	Imwitor® PG3 C10	Polyglyceryl-3 Caprate	IOI Oleo GmbH	1.50
B	SOFTISAN® conditionHAIR	PCA Glyceryl Oleate	IOI Oleo GmbH	1.50

Manufacturing Process
Phase A: Combine all ingredients of phase A and stir until everything is dissolved.
Phase B: Prepare all ingredients of phase B.
Afterwards combine phase A and B while stirring slowly until a homogeneous gel is formed.
Adjust pH to 5.5 ± 0.05.

Specification
Appearance: Yellowish, slightly turbid, viscous gel
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

CONDITIONING SHAMPOO ALL NATURAL INGREDIENTS

400.3.1.1

CONDITIONING. SLES-FREE. CLEANSING.

Alternative preservation: Cosphaderm® TOM, Cosphaderm® Propanediol natural, Cosphaderm® Magnolia Extract 98

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	68.90
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	3.00
A	Sulfopon® 1216 G	Sodium Coco Sulfate	BASF SE	6.50
A	Plantacare® 1200 UP	Lauryl Glucoside	BASF SE	7.35
B	Dehyton® K	Cocamidopropyl Betaine	BASF SE	4.90
B	Plantacare® 818 UP	Coco Glucoside	BASF SE	2.50
C	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	1.00
C	Cosphaderm® E NGM	Lysolecithin	Cosphatec GmbH	1.00
D	Cosphaderm® TOM	Pentylene GlycolGlyceryl CaprylateGlyceryl Undecylenate	Cosphatec GmbH	1.80
D	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	3.00
D	Cosphaderm® Magnolia Extract 98	Magnolia Officinalis Bark Extract	Cosphatec GmbH	0.05

Manufacturing Process
Phase A: Combine all ingredients and dissolve Phase A at 40°C.
Phase B: Add phase B to phase A and adjust the pH to 5.0 – 5.5.
Phase C: Add phase C to phase A/B under soft stirring.
Phase D: Dissolve Cosphaderm® Magnolia Extract 98 in Cosphaderm® Propanediol natural and Cosphaderm® TOM. Add phase D to phase A/B/C under stirring.
Adjust the pH to 5.0 ± 0.05.

Specification
Appearance: Yellowish, translucent gel
pH: 5.0 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

CURLING BOOSTER SHAMPOO

400.82.1.1

CONDITIONING. HYDRATING. VEGAN.

Alternative preservation: Cosphaderm® Sodium LAAS, Cosphaderm® Propanediol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	65.60
A	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	5.00
A	Cosphaderm® Sodium LAAS	Sodium LevulinateSodium Anisate	Cosphatec GmbH	1.00
A	Cosphaderm® X soft	Xanthan Gum	Cosphatec GmbH	0.80
B	Plantacare® 2000 UP	Decyl Glucoside	BASF SE	20.00
C	Cosphaderm® E NGM	Lysolecithin	Cosphatec GmbH	1.00
C	Lanette® O	Cetearyl Alcohol	BASF SE	4.00
C	SOFTISAN® conditionHAIR	PCA Glyceryl Oleate	IOI Oleo GmbH	0.50
C	Cotton Oil	Gossypium Herbaceum Seed Oil	Gustav Heess GmbH	2.00
C	Cosphaderm® T-70 NON GMO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.10

Manufacturing Process
Phase A: Combine all ingredients of phase A and stir until everything is dissolved.
Phase B: Slowly add phase B to phase A under stirring. Stir until complete dissolution.
Adjust pH to 5.5 ± 0.05 and heat phase A and B to 70 °C.
Phase C: Combine all ingredients and heat phase C to 70 °C. Add then phase C to phase A and B under strong stirring and homogenise the formulation.
Adjust pH to 5.2 ± 0.05.

Specification
Appearance: Slightly yellowish gel cream
pH: 5.2 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

DETANGLE SHAMPOO ALL NATURAL INGREDIENTS

400.46.2.1

CONDITIONING. DETANGLING. SULFATE-FREE.

Alternative preservation: Cosphaderm® GeMix, Cosphaderm® Sodium pAS natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	71.90
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	3.00
A	Cosphaderm® X soft	Xanthan Gum	Cosphatec GmbH	1.00
A	Cosphaderm® PA ECONAT	Phytic AcidAqua	Cosphatec GmbH	0.10
B	Cosphaderm® GeMix	Glyceryl CaprylateGlyceryl Undecylenate	Cosphatec GmbH	1.00
B	Cosphaderm® Sodium pAS natural	Sodium Anisate	Cosphatec GmbH	0.20
B	SOFTISAN® conditionHAIR	PCA Glyceryl Oleate	IOI Oleo GmbH	0.50
B	Perlastan® SC	Sodium/Disodium Cocoyl Glutamate	Schill + Seilacher Struktol GmbH	10.00
B	Plantacare® 818 UP	Coco Glucoside	BASF SE	10.00
B	Plantacare® 1200 UP	Lauryl Glucoside	BASF SE	2.00
B	MCT Oil Typ V Ph. Eur.	Caprylic/Capric Triglyceride	Gustav Heess GmbH	0.30

Manufacturing Process
Phase A: Combine all ingredients of phase A and stir slowly until everything is completely dissolved.
Phase B: Combine all ingredients of phase B.
Add phase B to phase A under stirring with the propeller stirrer.
Adjust the pH to 5.5 ± 0.05.

Specification
Appearance: Milky, white viscous gel
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

FRIZZ CONTROL SMOOTHING SHAMPOO ALL NATURAL INGREDIENTS

400.120.1.1

IMPROVES COMBABILITY. NOURISHING. CLEANSING.

Alternative preservation: Cosphaderm® Sodium LAAS

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	76.60
A	Sulfopon® 1216 G	Sodium Coco Sulfate	BASF SE	6.00
B	Dehyton® K	Cocamidopropyl Betaine	BASF SE	6.00
B	Plantacare® 818 UP	Coco Glucoside	BASF SE	8.00
B	Cosphaderm® Sodium LAAS	Sodium LevulinateSodium Anisate	Cosphatec GmbH	1.00
B	SOFTISAN® conditionHAIR	PCA Glyceryl Oleate	IOI Oleo GmbH	0.50
B	Imwitor® 948	Glyceryl Oleate	IOI Oleo GmbH	1.00
B	Argan Oil	Argania Spinosa Kernel Oil	Gustav Heess GmbH	0.50
B	Guar Gum	Guar Hydroxypropyltrimonium Chloride	-	0.40

Manufacturing Process
Phase A: Combine all ingredients and dissolve Phase A at 40°C.
Phase B: Add phase B to phase A under soft stirring.
Adjust the pH to 5.0 ± 0.05.

Specification
Appearance: Slightly cloudy viscous gel
pH: 5.0 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

NATURAL MILD & FOAMY BABY SHAMPOO ALL NATURAL INGREDIENTS

500.30.2.1

GENTLE CLEANSING. MILD. VEGAN.

Alternative preservation: Cosphaderm® Hexiol natural, Cosphaderm® Pentiol natural, Cosphaderm® Propanediol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	74.00
A	Cosphaderm® Hexiol natural	1,2-Hexanediol	Cosphatec GmbH	2.50
A	Cosphaderm® Pentiol natural	Pentylene Glycol	Cosphatec GmbH	2.50
A	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	4.00
A	Cosphaderm® Panthenol natural	Panthenol	Cosphatec GmbH	1.00
B	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	1.00
C	Plantacare® 818 UP	Coco Glucoside	BASF SE	5.00
C	Plantacare® 2000 UP	Decyl Glucoside	BASF SE	10.00

Manufacturing Process
Phase A: Combine all ingredients of phase A.
Phase B: Add phase B to phase A while stirring and stir until everything is completely dissolved.
Phase C: Prepare phase C and add to phase A+B under slow stirring to prevent foaming.
Adjust pH to 5.5 ± 0.05.

Specification
Appearance: Transparent, viscous gel
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

MILD & FOAMY BABY SHAMPOO

500.30.1.1

GENTLE CLEANSING. MILD. VEGAN.

Alternative preservation: Cosphaderm® Hexiol, Cosphaderm® Pentiol GL, Cosphaderm® Propanediol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	74.00
A	Cosphaderm® Hexiol	1,2-Hexanediol	Cosphatec GmbH	2.50
A	Cosphaderm® Pentiol GL	Pentylene Glycol	Cosphatec GmbH	2.50
A	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	4.00
A	Cosphaderm® Panthenol natural	Panthenol	Cosphatec GmbH	1.00
B	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	1.00
C	Plantacare® 818 UP	Coco Glucoside	BASF SE	5.00
C	Plantacare® 2000 UP	Decyl Glucoside	BASF SE	10.00

POWDER SHAMPOO ALL NATURAL INGREDIENTS

300.67.2.1

SUSTAINABLE. POWDER TO GEL. EASY TO REFILL.

Alternative preservation: Cosphaderm® Sodium LAAS, Cosphaderm® Zinc Lactate natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Sodium Lauryl Sulfoacetate	Sodium Lauryl Sulfoacetate	-	8.00
A	BergaSoft SCI 80	Sodium Cocoyl Isethionate	Berg + Schmidt GmbH & Co. KG	5.00
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.10
A	Cosphaderm® Sodium LAAS	Sodium LevulinateSodium Anisate	Cosphatec GmbH	1.00
A	Citric Acid	Citric Acid	-	0.10
A	Cosphaderm® SF-75H	Hydrogenated Lecithin	Cosphatec GmbH	0.50
A	Sorbitol	Sorbitol	-	2.00
A	Sodium Chloride	Sodium Chloride	-	0.45
A	Cosphaderm® Zinc Lactate natural	Zinc Lactate	Cosphatec GmbH	0.50
B	Water	Aqua	-	82.35

Manufacturing Process
Phase A: Combine all ingredients of phase A and stir until everything is homogeneous.
Phase B: Simply add lukewarm tap water to the bottle, then add in your powder shampoo. Shake for approximately 30 seconds and wait until everything has been dissolved. Let the mixture rest for 24 h.

Specification
Appearance: Pearlescent, viscous gel
pH: 5.5 ± 0.10
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

POWDER TO FOAM SHAMPOO ALL NATURAL INGREDIENTS

400.89.1.1

WATERLESS. INSTANT WATER-ACTIVATED FORMULATION FOR IMMEDIATE USE. CLEAN BEAUTY.

Alternative preservation: Cosphaderm® Zinc Lactate

PHASE	Ingredient	INCI	SUPPLIER	%
A	Sodium Cocoyl Isethionate	Sodium Cocoyl Isethionate	Berg + Schmidt GmbH & Co. KG	53.00
A	Sorbitol	Sorbitol	-	10.00
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	3.00
A	Cosphaderm® KG	Amorphophallus Konjac Root Extract	Cosphatec GmbH	1.00
A	Cosphaderm® Zinc Lactate natural	Zinc Lactate	Cosphatec GmbH	2.00
A	Citric Acid	Citric Acid	-	0.80
A	Hydrolyzed Wheat Protein	Hydrolyzed Wheat Protein	-	1.50
A	Magnesium Stearate	Magnesium Stearate	-	10.00
A	Cosphaderm® SF-75H	Hydrogenated Lecithin	Cosphatec GmbH	1.00
A	CORN PO4 PH "B“	Distarch Phosphate	Agrana	10.00
A	Sensocel® bc 20	Cellulose	CFF GmbH & Co. KG	5.00
B	Sunflower Oil	Helianthus Annuus Seed Oil	Gustav Heess GmbH	2.50
B	Cosphaderm® T-70 NON GMO ECO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.20

MANUFACTURING PROCESS
Phase A: Mix all ingredients together and stir until homogeneous.
Phase B: Combine all ingredients and add phase B to A while stirring.

SPECIFICATION
Appearance: White powder
Stability: stable for 3 months at room temperature and 40 °C
Microbiological stability: proven (Water activity value less than 0.75)

SHAMPOO BAR ALL NATURAL INGREDIENTS

300.65.1.1

WATERFREE. CLEANSING. ALL NATURAL.

Alternative preservation: Cosphaderm® Dicapo natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	BergaSoft SCI 80	Sodium Cocoyl Isethionate	Berg + Schmidt GmbH & Co. KG	47.00
A	Lanette® 16	Cetyl Alcohol	BASF SE	15.80
A	Kahlwax 6607L	Helianthus Annuus Seed Cera	Kahl GmbH & Co. KG	2.50
A	Cosphaderm® Feel	Triheptanoin	Cosphatec GmbH	5.00
A	Coconut Oil	Coco Nucifera Oil	Gustav Heess GmbH	15.00
A	Jojoba Oil	Simmondsia Chinensis Seed Oil	Gustav Heess GmbH	10.00
B	Cosphaderm® Tapmix	LecithinHelianthus Annuus Seed OilTocopherolAscorbyl Palmitate	Cosphatec GmbH	1.00
B	Cosphaderm® Dicapo natural	Caprylyl GlycolPropanediolGlyceryl Caprylate	Cosphatec GmbH	0.70
B	Corn Starch	Zea Mays Starch	-	3.00

Manufacturing Process
Combine all ingredients of phase A, heating to 80°C. When everything has melted, add phase B. Take off heat and pour into molds.

Specification
Appearance: Solid, yellowish bar
Stability: stable for 3 months at room temperature and 40 °C
Microbiological stability: proven (Water activity value less than 0.75)

INTENSE REPAIR HAIR MASK ALL NATURAL INGREDIENTS

400.85.1.1

CONDITIONING. SMOOTHING. GLOSSY.

Alternative preservation: Cosphaderm® Octiol natural, Cosphaderm® Sodium LAAS

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	75.90
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	5.00
A	Betaine	Betaine	-	2.00
A	Cosphaderm® Sodium LAAS	Sodium LevulinateSodium Anisate	Cosphatec GmbH	0.70
A	Cosphaderm® Octiol natural	Caprylyl Glycol	Cosphatec GmbH	0.50
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.20
B	Cosphaderm® SF-75H	Hydrogenated Lecithin	Cosphatec GmbH	1.00
C	Lanette®N	Cetearyl AlcoholSodium Cetearyl Sulfate	BASF SE	2.50
C	Lanette® O	Cetearyl Alcohol	BASF SE	2.00
C	Shea Butter refined	Butyrospermum Parkii Butter	Gustav Heess GmbH	2.00
C	Coconut Oil	Coco Nucifera Oil	Gustav Heess GmbH	3.00
C	Argan Oil	Argania Spinosa Kernel Oil	Gustav Heess GmbH	2.00
C	Cosphaderm® Feel	Triheptanoin	Cosphatec GmbH	1.50
C	Broccoli Seed Oil	Brassica Oleracea Seed Oil	-	1.00
C	SOFTISAN® conditionHAIR	PCA Glyceryl Oleate	IOI Oleo GmbH	0.50
C	Cosphaderm® T-70 NON GMO ECO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.20

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Add Cosphaderm® SF-75H to phase A and let it soak for 10-20 minutes. Then heat phase A+B to 70 °C.
Phase C: Combine all ingredients of phase C and heat to 70 °C. Add then phase C to phase A+B under
strong stirring and homogenise the formulation.
Adjust the pH to 5.0 ± 0.05.

SPECIFICATION
Appearance: Light beige gel cream
pH: 5.0 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

NATURAL CONDITIONER ALL NATURAL INGREDIENTS

400.72.1.1

LIGHT TEXTURE. SOFTENING. ANTI-FRIZZ.

Alternative preservation: Cosphaderm® Octiol natural, Cosphaderm® Magnolia Extract 98

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	86.95
A	Hydrolyzed Oat Protein	Hydrolyzed Oat Protein	-	0.50
A	Cosphaderm® PA ECONAT	Phytic AcidAqua	Cosphatec GmbH	0.15
B	Lanette®N	Cetearyl AlcoholSodium Cetearyl Sulfate	BASF SE	5.00
B	Lanette® O	Cetearyl Alcohol	BASF SE	2.00
B	MCT Oil Typ V Ph. Eur.	Caprylic/Capric Triglyceride	Gustav Heess GmbH	2.00
B		Lecithin	Cosphatec GmbH	1.50
B	Cosphaderm® T-70 NON GMO ECO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.20
C	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	1.00
C	Cosphaderm® Octiol natural	Caprylyl Glycol	Cosphatec GmbH	0.50
C	Cosphaderm® Magnolia Extract 98	Magnolia Officinalis Bark Extract	Cosphatec GmbH	0.20

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Combine all ingredients of phase B.
Heat both phases separately to 70-75 °C and add phase B to A while homogenising.
Phase C: Dissolve Cosphaderm® Magnolia Extract 98 in Cosphaderm® Diols. Add phase C to phase A/B under stirring.
Adjust the pH to 4.0 ± 0.05.

SPECIFICATION
Appearance: Beige, viscous gel cream
pH: 4.0 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

LEAVE-IN HAIR CREAM ALL NATURAL INGREDIENTS

400.91.1.1

CONDITIONING. HYDRATING. ANTI-FRIZZ.

Alternative preservation: Cosphaderm® Absolute, Cosphaderm® Octiol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	52.00
A	Inulin	Inulin	-	1.00
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.25
A	Sclerotium Gum	Sclerotium Gum	-	0.25
B	Cosphaderm® Absolute	PropanediolSodium LactateBetaineAqua	Cosphatec GmbH	20.00
C	Cosphaderm® GS Connect	Glyceryl Stearate Citrate	Cosphatec GmbH	2.50
C	Lanette® O	Cetearyl Alcohol	BASF SE	4.00
C	Stearic Acid	Stearic Acid	-	2.00
C	Shea Butter refined	Butyrospermum Parkii Butter	Gustav Heess GmbH	7.00
C	Cosphaderm® Octiol natural	Caprylyl Glycol	Cosphatec GmbH	0.30
C	Argan Oil	Argania Spinosa Kernel Oil	Gustav Heess GmbH	3.00
C	Cosphaderm® Feel	Triheptanoin	Cosphatec GmbH	3.00
C	MCT Oil Typ V Ph. Eur.	Caprylic/Capric Triglyceride	Gustav Heess GmbH	4.00
C	SOFTISAN® conditionHAIR	PCA Glyceryl Oleate	IOI Oleo GmbH	0.50
C	Cosphaderm® T-70 NON GMO ECO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.20

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Add phase B to A while stirring. Then heat phase A+B to 75 °C.
Phase C: Combine all ingredients of phase C and heat to 75 °C. Then add phase C to phase A+B under
strong stirring and homogenise the formulation.
Adjust the pH to 4.5 ± 0.05.

SPECIFICATION
Appearance: White, high viscous cream
pH: 4.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

LIGHT HAIR STYLING GEL ALL NATURAL INGREDIENTS

400.122.1.1

LIGHT TEXTURE. SUITABLE FOR CURLS. VEGAN.

Alternative preservation: Cosphaderm® Hexiol natural, Cosphaderm® Propanediol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	84.10
A	Sodium Chloride	Sodium Chloride	-	0.20
B	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	5.00
B	Cosphaderm® KG	Amorphophallus Konjac Root Extract	Cosphatec GmbH	0.70
C	Ethanol	Alcohol	-	3.00
C	Cosphaderm® Hexiol natural	1,2-Hexanediol	Cosphatec GmbH	2.00
C	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	5.00

Manufacturing Process
Phase A: Combine all ingredients of phase A.
Phase B: Disperse Cosphaderm® KG in glycerol and add phase B to phase A. Stir until everything is dissolved.
Phase C: Add phase B to phase A/B.
Adjust the pH to 4.8 – 5.0.

Specification
Appearance: Turbid, high viscous gel
pH: 4.8 – 5.0
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

NATURAL HAIR STYLING GEL ALL NATURAL INGREDIENTS

400.121.1.1

MEDIUM HOLD. SUITABLE FOR CURLS. VEGAN.

Alternative preservation: Cosphaderm® Hexiol natural, Cosphaderm® Propanediol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	82.00
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	5.00
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	3.00
B	Ethanol	Alcohol	-	3.00
B	Cosphaderm® Hexiol natural	1,2-Hexanediol	Cosphatec GmbH	2.00
B	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	5.00

Manufacturing Process
Phase A: Disperse Cosphaderm® X 34 in glycerol and add demin. water. Stir until everything is dissolved.
Phase B: Add phase B to phase A.
Adjust the pH to 4.8 – 5.0.

Specification
Appearance: Transparent, high viscous gel
pH: 4.8 – 5.0
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

Cleansing

ALOE VERA MICELLAR WATER ALL NATURAL INGREDIENTS

300.12.3.1

DEEP CLEANSING. REFRESHING. MAKE-UP REMOVING.

Alternative preservation: Cosphaderm® Sodium LAAS, Cosphaderm® Propanediol natural, Cosphaderm® Pentiol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	63.50
A	Aloe Vera Juice 100 %	Aloe Barbadensis Leaf Juice	-	20.00
A	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	5.00
A	Cosphaderm® Pentiol natural	Pentylene Glycol	Cosphatec GmbH	1.00
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	5.00
A	Cosphaderm® PA ECONAT	Phytic AcidAqua	Cosphatec GmbH	0.10
A	Cosphaderm® Sodium LAAS	Sodium LevulinateSodium Anisate	Cosphatec GmbH	1.60
B	Plantacare® 2000 UP	Decyl Glucoside	BASF SE	3.80

Manufacturing Process
Phase A: Combine all ingredients of phase A.
Phase B: Add phase B to A carefully to avoid foaming.
Adjust the pH to 5.5 ± 0.05.

Specification
Appearance: Transparent liquid solution
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

ACTIVATING CLEANSING FOAM ALL NATURAL INGREDIENTS

300.83.1.1

GENTLY CLEANSING. REFRESHING. CREAMY.

Alternative preservation: Cosphaderm® GeMix, Cosphaderm® Pentiol natural, Cosphaderm® Propanediol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	83.40
A	Cosphaderm® Pentiol natural	Pentylene Glycol	Cosphatec GmbH	3.00
A	Cosphaderm® PA ECONAT	Phytic AcidAqua	Cosphatec GmbH	0.10
A	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	3.00
A	Cosphaderm® Panthenol natural	Panthenol	Cosphatec GmbH	1.00
B	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.10
B	Cosphaderm® Sodium Hyaluronate	Sodium Hyaluronate	Cosphatec GmbH	0.10
C	Plantacare® 818 UP	Coco Glucoside	BASF SE	4.00
C	Perlastan® SC	Sodium/Disodium Cocoyl Glutamate	Schill + Seilacher Struktol GmbH	4.00
C	SOFTISAN® conditionHAIR	PCA Glyceryl Oleate	IOI Oleo GmbH	0.50
C	Cosphaderm® GeMix	Glyceryl CaprylateGlyceryl Undecylenate	Cosphatec GmbH	0.80

Manufacturing Process
Phase A: Combine all ingredients of phase A and stir until everything is dissolved.
Phase B: Add phase B to phase A under stirring.
Phase C: Combine all ingredients of phase C separately. Add then phase C to phase A and B under
stirring.
Adjust pH to 5.5 ± 0.05.

BALM TO MILK FACIAL CLEANSER ALL NATURAL INGREDIENTS

300.81.1.1

GENTLE CLEANSING. MAKE-UP REMOVING. VEGAN.

Alternative preservation: Cosphaderm® MultiMEG

PHASE	Ingredient	INCI	SUPPLIER	%
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	40.00
A	Sucrose Stearate	Sucrose Stearate	-	3.00
B	MCT Oil Typ V Ph. Eur.	Caprylic/Capric Triglyceride	Gustav Heess GmbH	35.50
B	Argan Oil	Argania Spinosa Kernel Oil	Gustav Heess GmbH	20.00
B	Cosphaderm® T-70 NON GMO ECO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.50
C	Cosphaderm® MultiMEG	Glyceryl CaprylatePentylene GlycolMagnolia Officinalis Bark Extract	Cosphatec GmbH	1.00

Manufacturing Process
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Combine all ingredients of phase B.
Heat both phases separately to 70-75 °C and add phase B to A very slowly while homogenising.
Phase C: Cool down to 40°C and add Phase C.

Specification
Appearance: Slightly yellowish high viscous gel
Stability: stable for 3 months at room temperature and 40 °C
Microbiological stability: proven (Water activity value less than 0.75)

DEEP AND SOFT CLEANSING BALM ALL NATURAL INGREDIENTS

300.113.1.1

MAKE-UP REMOVING. SOOTHING. GENTLE CLEANSING.

Alternative preservation: Cosphaderm® Hexiol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Shea Butter refined	Butyrospermum Parkii Butter	Gustav Heess GmbH	25.70
A	Kahlwax 2811	Oryza Sativa Bran Cera	Kahl GmbH & Co. KG	8.00
A	Lanette® O	Cetearyl Alcohol	BASF SE	20.00
A	MCT Oil Typ V Ph. Eur.	Caprylic/Capric Triglyceride	Gustav Heess GmbH	10.00
A	Cetiol® OE	Dicaprylyl Ether	BASF SE	15.00
A	Babassu Oil	Orbignya Oleifera (Babassu) Seed Oil	Gustav Heess GmbH	10.00
B	Span™ 80	Sorbitan Oleate	Croda Inc.	5.00
B	Plantacare® 2000 UP	Decyl Glucoside	BASF SE	4.00
B	Cosphaderm® Hexiol natural	1,2-Hexanediol	Cosphatec GmbH	1.50
C	Bisabolol	Bisabolol	-	0.50
C	Cosphaderm® Tocopharin	TocopherolHelianthus Annuus Seed OilCarnosic Acid	Cosphatec GmbH	0.30

Manufacturing Process
Combine all ingredients of phase A and heat to 75-80°C until everything has melted.
Then add phase B to phase A and stir until everything is homogeneous. Add phase C and fill into molds.

Specification
Appearance: Slightly yellowish balm
Stability: stable for 3 months at room temperature and 40 °C
Microbiological stability: proven (Water activity value less than 0.75)

FACIAL CLEANSING LOTION ALL NATURAL INGREDIENTS

300.57.1.1

NOURISHING. VEGAN. PURIFYING.

Alternative preservation: Cosphaderm® TOM, Cosphaderm® Propanediol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	74.05
A	Cosphagard® SA natural	Salicylic Acid	Cosphatec GmbH	1.00
B	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	2.00
B	Aloe Vera Powder	Aloe Barbadensis Leaf Juice Powder	-	0.25
B	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	5.00
B	Cosphaderm® X soft	Xanthan Gum	Cosphatec GmbH	0.50
C	Coconut Oil	Coco Nucifera Oil	Gustav Heess GmbH	4.50
C	Jojoba Oil	Simmondsia Chinensis Seed Oil	Gustav Heess GmbH	1.00
C	Cosphaderm® Feel	Triheptanoin	Cosphatec GmbH	4.00
C	Almond Oil	Prunus Amygdalus Dulcis Oil	Gustav Heess GmbH	1.00
C	Cosphaderm® T-70 NON GMO ECO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.10
C	Cosphaderm® SF-75H	Hydrogenated Lecithin	Cosphatec GmbH	1.00
C	Imwitor 960 K	Glyceryl Stearate SE	IOI Oleo GmbH	4.00
D	Cosphaderm® TOM	Pentylene GlycolGlyceryl CaprylateGlyceryl Undecylenate	Cosphatec GmbH	1.60

Manufacturing Process
Phase A: Combine water and Cosphagard® SA natural and raise the pH value to 10 – 11. Stir until complete dissolution. Afterwards lower the pH to approximately 6.
Phase B: Add phase B to phase A and stir until everything is completely dissolved. Heat to 70 °C.
Phase C: Combine all ingredients of phase C and heat to 70 °C.
Add phase C to A+B while stirring. Homogenise at 40°C.
Phase D: Add Cosphaderm® TOM to the emulsion.
Adjust pH to 6.0 ± 0.05.

Specification
Appearance: Light beige lotion
pH: 6.0 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

PURIFYING CLEANSING LOTION

300.32.3.1

MAKE-UP REMOVING. PURIFYING. CLEANSING.

Preservation: Cosphagard® Pol, Cosphaderm® GMCY

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	64.50
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	2.00
A	Cosphaderm® PA ECONAT	Phytic AcidAqua	Cosphatec GmbH	0.20
A	Cosphagard® Pol	AquaSodium LevulinatePotassium Sorbate	Cosphatec GmbH	2.00
A	Ronacare® Allantoin	Allantoin	Merck KGaA	0.50
A	Cosphaderm® Panthenol natural	Panthenol	Cosphatec GmbH	1.00
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.50
B	Lanette® O	Cetearyl Alcohol	BASF SE	5.00
B	Cosphaderm® SF-75H	Hydrogenated Lecithin	Cosphatec GmbH	2.00
B	Cosphaderm® Feel	Triheptanoin	Cosphatec GmbH	10.00
B	Almond Oil	Prunus Amygdalus Dulcis Oil	Gustav Heess GmbH	12.00
B	Cosphaderm® GMCY	Glyceryl Caprylate	Cosphatec GmbH	0.30

Manufacturing Process
Phase A: Combine all ingredients of phase A and stir until everything is dissolved. Heat to 65 °C.
Phase B: Prepare all ingredients of phase B and heat to 65 °C.
Add phase B to phase A under stirring. Homogenise.
Adjust the pH to 5.5 ± 0.05 if necessary.

Specification
Appearance: White viscous gel cream
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

SOFT FACE CLEANSER ALL NATURAL INGREDIENTS

300.14.1.2

MILDLY CLEANSING. SENSITIVE. SULFATE-FREE.

Alternative preservation: Cosphaderm® Propanediol natural, Cosphaderm® LA-T

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	ad 100
A	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	4.35
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	5.00
A	Cosphaderm® LA-T	Levulinic AcidGlycerinSodium LevulinateAqua	Cosphatec GmbH	1.00
A	Cosphaderm® CHA	Caprylhydroxamic Acid	Cosphatec GmbH	0.15
B	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.50
C	Plantacare® 818 UP	Coco Glucoside	BASF SE	10.00
C	Plantacare® 2000 UP	Decyl Glucoside	BASF SE	4.00

Manufacturing Process
Phase A: Mix all ingredients except Cosphaderm® CHA. Add Cosphaderm® CHA and Stir phase A until complete dissolution.
Phase B: Slowly add Cosphaderm® X 34 to phase A while stirring.
Phase C: Mix phase C and add to phase A+B while carefully stirring to prevent foaming.
Adjust the pH to 5.5 ± 0.05.

Specification
Appearance: Transparent viscous gel
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

HYGIENIC HAND GEL ALL NATURAL INGREDIENTS

300.66.1.1

DISINFECTING. NON-STICKY. FAST ABSORBING.

Alternative preservation: Cosphaderm® Pentiol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	49.60
A	Cosphaderm® X soft	Xanthan Gum	Cosphatec GmbH	0.40
B	Cosphaderm® Pentiol natural	Pentylene Glycol	Cosphatec GmbH	20.00
C	Ethanol	Alcohol	-	30.00

Manufacturing Process
Phase A: Add Cosphaderm® X soft to the water and stir until it’s completely dissolved.
Phase B: Add phase B in small steps to phase A while stirring at 1500rpm.
Phase C: Add phase C in small steps to phase A+B while stirring at 1500rpm.
Adjust the pH to 7.0 ± 0.05.

Specification
Appearance: translucent, viscous gel
pH: 7.0 ± 0.05

Tested against bacteria according to DIN EN 1500, 1276, 1650.

JELLY SOAP

300.22.1.2

CLEANSING. FOAMING. BOUNCY TEXTURE.

Alternative preservation: Cosphaderm® Hexiol, Cosphaderm® Octiol, Cosphaderm® Propanediol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	5.00
A	Cosphaderm® Hexiol	1,2-Hexanediol	Cosphatec GmbH	2.00
A	Cosphaderm® Octiol	Caprylyl Glycol	Cosphatec GmbH	0.50
A	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	1.00
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.50
A	Cosphaderm® KG	Amorphophallus Konjac Root Extract	Cosphatec GmbH	0.50
B	Demin. Water	Aqua	-	83.50
C	Plantacare® 810 UP	Caprylyl/Capryl Glucoside	BASF SE	2.00
C	Texapon® NSO UP	Sodium Laureth Sulfate	BASF SE	5.00

Manufacturing Process
Phase A: Prepare phase A and stir until dispersed.
Phase B: Slowly add the water to phase A under stirring and stir until complete dissolution.
If wanted, add heat-proof colour.
Phase C: Prepare phase C, adjust the pH to 5.5 ± 0.05 and set aside.
Heat phase A+B to its boiling point and keep this temperature for 2 – 3 min.
Add phase C to the hot phase A+B. Continue stirring until everything is combined.
Quickly pour the warm mixture into moulds and let it cool down.

Specification
Appearance: Clear, solid, elastic jelly
pH: 5.5 – 6.5
Stability: stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

NATURAL JELLY SOAP ALL NATURAL INGREDIENTS

300.96.1.1

BOUNCY TEXTURE. CLEANSING. FOAMING.

Alternative preservation: Cosphaderm® Pentiol natural, Cosphaderm® Sodium LAAS

PHASE	Ingredient	INCI	SUPPLIER	%
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	5.00
A	Cosphaderm® Pentiol natural	Pentylene Glycol	Cosphatec GmbH	3.00
A	Cosphaderm® KG	Amorphophallus Konjac Root Extract	Cosphatec GmbH	0.50
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.50
B	Demin. Water	Aqua	-	69.50
B	Perlastan® SC	Sodium/Disodium Cocoyl Glutamate	Schill + Seilacher Struktol GmbH	8.00
B	Plantacare® 818 UP	Coco Glucoside	BASF SE	12.00
B	SOFTISAN® conditionHAIR	PCA Glyceryl Oleate	IOI Oleo GmbH	0.50
C	Cosphaderm® Sodium LAAS	Sodium LevulinateSodium Anisate	Cosphatec GmbH	1.00

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until dispersed.
Phase B: Prepare phase B and lower the pH to ~ 5.5.
Add phase C and phase A to phase B.
Adjust the pH to 5.5 ± 0.05.

Heat the prepared solution to 80 – 90 °C and stir at this temperature for 2 – 3 min.
Quickly pour the warm mixture into moulds and let it cool down.

SPECIFICATION
Appearance: Clear, solid, elastic jelly
pH: 5.5 ± 0.05
Stability: stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

NATURAL LIQUID SOAP ALL NATURAL INGREDIENTS

300.40.2.1

FOAMING. SULFATE FREE. GENTLE.

Alternative preservation: Cosphaderm® Sodium LAAS

PHASE	Ingredient	INCI	SUPPLIER	%
A	Glycerin	Glycerin	-	4.00
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	1.00
A	Cosphaderm® Sodium Hyaluronate	Sodium Hyaluronate	Cosphatec GmbH	0.20
B	Cosphaderm® Sodium LAAS	Sodium LevulinateSodium Anisate	Cosphatec GmbH	1.00
B	Demin. Water	Aqua	-	83.80
C	Plantacare® 818 UP	Coco Glucoside	BASF SE	7.00
C	Plantacare® 810 UP	Caprylyl/Capryl Glucoside	BASF SE	3.00

Manufacturing Process
Phase A: Combine all ingredients of phase A and stir until Cosphaderm® X 34 and Cosphaderm® Sodium Hyaluronate are dispersed.
Phase B: Add phase B to phase A.
Phase C: Add phase C to phase A+B under stirring.
Adjust the pH to 5.5 ± 0.05.

Specification
Appearance: Transparent, clear gel
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

SOFT CREAM SOAP

300.47.2.1

CLEANSING. FOAMING. NOURISHING.

Alternative preservation: Cosphaderm® Sodium LAAS

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	ad 100
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	5.00
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.50
A	Cosphaderm® PA ECONAT	Phytic AcidAqua	Cosphatec GmbH	0.10
A	Carbopol® Ultrez 21 Polymer	Acrylates/C10-30 Alkyl Acrylate Crosspolymer	Lubrizol	0.40
A	Cosphaderm® Sodium LAAS	Sodium LevulinateSodium Anisate	Cosphatec GmbH	1.00
B	Texapon® NSO UP	Sodium Laureth Sulfate	BASF SE	15.00
B	Plantacare® 818 UP	Coco Glucoside	BASF SE	12.00
B	Sunflower Oil	Helianthus Annuus Seed Oil	Gustav Heess GmbH	2.00
B	Almond Oil	Prunus Amygdalus Dulcis Oil	Gustav Heess GmbH	2.00
B	Jojoba Oil	Simmondsia Chinensis Seed Oil	Gustav Heess GmbH	2.00
B	Cosphaderm® Feel	Triheptanoin	Cosphatec GmbH	2.00
B	Cosphaderm® T-70 NON GMO ECO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.30
C	Phenylpropanol	Phenylpropanol	-	0.30

Manufacturing Process
Phase A: Combine all ingredients and stir until everything is completely dissolved.
Phase B: Combine phase B separately and add phase B to phase A under soft stirring. Stir until both phases are mixed.
Phace C: Add phenylpropanol to phase A+B. Adjust th pH to 5.5 ± 0.05.

Specification
Appearance: Transparent, viscous liquid
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

CREAMY BODY WASH ALL NATURAL INGREDIENTS

300.50.1.1

FOAMING. CLEANSING. MILD.

Alternative preservation: Cosphaderm® Sodium LAAS, Cosphaderm® Propanediol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	65.38
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	2.00
A	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	2.00
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.70
A	Cosphaderm® Sodium LAAS	Sodium LevulinateSodium Anisate	Cosphatec GmbH	0.92
B	Perlastan® SC	Sodium/Disodium Cocoyl Glutamate	Schill + Seilacher Struktol GmbH	9.50
B	Plantacare® 1200 UP	Lauryl Glucoside	BASF SE	7.00
B	Sulfopon® 1216 G	Sodium Coco Sulfate	BASF SE	6.50
B	Cosphaderm® Feel	Triheptanoin	Cosphatec GmbH	2.00
C	Sodium Chloride	Sodium Chloride	-	4.00

Manufacturing Process
Phase A: Combine all ingredients and stir until Cosphaderm® X 34 is completely dissolved.
Phase B: Combine phase B and add phase B to phase A under slow stirring.
Phase C: Add phase C to phase A+B to thicken the formulation.
Adjust the pH to 5.5 ± 0.05.

Specification
Appearance: Milky, white vicous gel
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

DETOX SEA SALT SCRUB ALL NATURAL INGREDIENTS

300.128.1.1

VEGAN. NOURISHING. ACTIVATING.

Oil protection: Cosphaderm® T-70 NON GMO ECO

PHASE	Ingredient	INCI	SUPPLIER	%
A	Shea Butter refined	Butyrospermum Parkii Butter	Gustav Heess GmbH	12.50
A	Castor Oil	Ricinus Communis Seed Oil	Gustav Heess GmbH	5.00
A	BergaSoft SCI 80	Sodium Cocoyl Isethionate	Berg + Schmidt GmbH & Co. KG	7.00
A	Cosphaderm® Feel	Triheptanoin	Cosphatec GmbH	3.00
A	Jojoba Oil	Simmondsia Chinensis Seed Oil	Gustav Heess GmbH	6.00
A	Cosphaderm® T-70 NON GMO ECO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.50
B	Sea Salt	Maris Sal	-	66.00

Manufacturing Process
Phase A: Combine all the ingredients of phase A and melt, then leave to cool.
Phase B: Add phase B and pour into packaging.
The mixture thickens after a while.

Specification
Appearance: Yellowish paste with salt
Stability: stable for 3 months at room temperature and 40 °C
Microbiological stability: proven (Water activity value less than 0.75)

FIZZY BATH BOMB ALL NATURAL INGREDIENTS

300.68.1.1

FOAMY. SOOTHING. RELAXING.

Alternative preservation: Cosphaderm® GMCY

PHASE	Ingredient	INCI	SUPPLIER	%
A	Sodium Bicarbonate	Sodium Bicarbonate	-	42.00
A	Citric Acid	Citric Acid	-	21.00
A	Corn Starch	Zea Mays Starch	-	20.00
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.20
A	BergaSoft SCI 80	Sodium Cocoyl Isethionate	Berg + Schmidt GmbH & Co. KG	2.50
B	Cosphaderm® GMCY	Glyceryl Caprylate	Cosphatec GmbH	0.80
B	Coconut Oil	Coco Nucifera Oil	Gustav Heess GmbH	13.50

Manufacturing Process
Phase A: Combine all ingredients of phase A.
Phase B: Melt all ingredients of phase B (35-40°C) and add to phase A. Mix until everything is homogeneous.
Press mixture into molds.

Specification
Appearance: Solid, white bar
Stability: stable for 3 months at room temperature and 40 °C
Microbiological stability: proven (Water activity value less than 0.75)

GENTLE BODY WASH ALL NATURAL INGREDIENTS

300.73.1.1

NATURAL. FREE OF SLES. MILD CLEANSING.

Alternative preservation: Cosphaderm® Sodium LAAS

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	63.50
A	Sulfopon® 1216 G	Sodium Coco Sulfate	BASF SE	5.50
B	Plantacare® 818 UP	Coco GlucosideAqua	BASF SE	15.00
B	Dehyton® K	Cocamidopropyl BetaineAqua	BASF SE	5.00
B	Perlastan® SC	Sodium/Disodium Cocoyl GlutamateAqua	Schill + Seilacher Struktol GmbH	5.00
C	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	2.00
C	Sodium PCA	Sodium PCAAqua	-	1.00
C	Cosphaderm® Sodium LAAS	Sodium LevulinateSodium Anisate	Cosphatec GmbH	1.00
D	Sodium Chloride	Sodium Chloride	-	2.00

MANUFACTURING PROCESS
Phase A: Dissolve Phase A at 40°C.
Phase B: Combine all ingredients of phase B. Add Phase B to A under stirring.
Phase C: Add all ingredients one by one under moderate speed.
Add phase D to thicken the formulation.
Adjust the pH to 5.5 ± 0.05.

SPECIFICATION
Appearance: Slightly yellow, transparent visocus gel
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

STIMULATING SKIN PERFECTING SCRUB ALL NATURAL INGREDIENTS

300.15.3.1

MILD. NATURALLY ACTIVE AGAINST ACNE. CLEANSING.

Alternative preservation: Cosphaderm® LA-T, Cosphaderm® Sodium pAS natural, Cosphaderm® Pentiol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	71.25
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	4.00
A	Cosphaderm® PA ECONAT	Phytic AcidAqua	Cosphatec GmbH	0.10
A	Cosphaderm® Sodium pAS natural	Sodium Anisate	Cosphatec GmbH	0.20
A	Cosphaderm® LA-T	Levulinic AcidGlycerinSodium LevulinateAqua	Cosphatec GmbH	1.00
A	Cosphagard® SA natural	Salicylic Acid	Cosphatec GmbH	1.00
A	Cosphaderm® Pentiol natural	Pentylene Glycol	Cosphatec GmbH	3.00
B	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	1.00
C	Perlastan® SC	Disodium/Sodium Cocoyl Glutamate	Schill + Seilacher Struktol GmbH	10.30
C	Cosphaderm® Magnolia Extract 98	Magnolia Officinalis Bark Extract	Cosphatec GmbH	0.05
C	Plantacare® 1200 UP	Lauryl Glucoside	BASF SE	6.60
D	WorléeBeads	Hydrogenated Jojoba Oil	Worlée-Chemie GmbH	1.50

Manufacturing Process
Phase A: Combine all ingredients of phase A. Raise the pH to 11 to dissolve Cosphagard® SA natural. When everything is dissolved, lower the pH back to 5-6 again.
Phase B: Add Cosphaderm® X 34 to phase A and stir until everything is completely dissolved.
Phase C: Combine all ingredients of phase C separately. Add then phase C to phase A+B.
Phase D: Add phase D to the finished formulation.
Adjust the pH to 5.5 ± 0.05.

Specification
Appearance: Translucent gel with small peeling beads
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

VITALISING PEELING GEL ALL NATURAL INGREDIENTS

300.95.1.1

NATURAL PEELING BEADS. REFINING. CLEANSING.

Alternative preservation: Cosphaderm® Sodium LAAS, Cosphaderm® Propanediol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	81.00
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	1.00
A	Potassium Chloride	Potassium Chloride	-	1.00
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	3.50
A	Sorbitol	Sorbitol	-	2.00
A	Cosphaderm® Sodium LAAS	Sodium AnisateSodium Levulinate	Cosphatec GmbH	1.00
A	Cosphaderm® Panthenol natural	Panthenol	Cosphatec GmbH	0.50
A	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	5.00
B	Plantacare® 2000 UP	Decyl Glucoside	BASF SE	4.00
C	WorléeBeads Jojoba 20/60	Hydrogenated Jojoba Oil	Worlée-Chemie GmbH	1.00

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Add phase B to A carefully to avoid foaming.
Adjust the pH to 5.5 ± 0.05.
Phase C: Add phase C to the final formulation while stirring.

SPECIFICATION
Appearance: Transparent gel with small peeling beads
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

FRESH MAGNOLIA TOOTHPASTE

300.23.1.1

ACTIVE AGAINST CARIES. FLUORIDE-FREE. CALCIUM CARBONATE-BASED.

Alternative preservation: Cosphaderm® Magnolia Extract 98, Cosphaderm® TOM, Cosphaderm® Propanediol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Cosphaderm® Magnolia Extract 98	Magnolia Officinalis Bark Extract	Cosphatec GmbH	0.10
A	Cosphaderm® TOM	Pentylene GlycolGlyceryl CaprylateGlyceryl Undecylenate	Cosphatec GmbH	1.00
B	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	2.00
B	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	15.00
B	Demin. Water	Aqua	-	35.80
B	Xylitol	Xylitol	-	2.00
C	Carbopol® Ultrez-21	Acrylates/C10-30 Alkyl Acrylate Crosspolymer	Lubrizol	0.10
C	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.50
D	Kaolin	Kaolin	-	10.00
D	Calcium Carbonate	Calcium Carbonate	Carl Roth GmbH & Co. KG	30.00
E	Ethanol	Alcohol	Carl Roth GmbH & Co. KG	1.00
E	Menthol	Menthol	FREY&LAU GmbH	0.50
F	Perlastan® SC	Sodium/Disodium Cocoyl Glutamate	Schill + Seilacher Struktol GmbH	2.00

Manufacturing Process
Phase A: Combine ingredients and stir until Cosphaderm® Magnolia Extract 98 is dissolved.
Phase B: Prepare phase B and add to phase A under stirring. Heat the mixture to 50 °C.
Phase C: Slowly add phase C into A+B and stir until complete dissolution.
Phase D: Prepare phase D and add it to phase A+B+C under stirring.
Phase E: Add phase E to the mixture and stir until everything is homogenous.
Phase F: Prepare phase F and add it to the finished formulation.
Adjust the pH to 7.0 ± 0.05.

Specification
Appearance: Milky-white paste
pH: 7.0 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

NATURAL GEL TOOTHPASTE ALL NATURAL INGREDIENTS

300.123.1.1

GENTLE CLEANSING. ANTI-PLAQUE. FLUORIDE-FREE.

Alternative preservation: Cosphaderm® Zinc Lactate natural, Cosphaderm® GMCY

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	45.10
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	7.00
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.50
A	Cosphaderm® Zinc Lactate natural	Zinc Lactate	Cosphatec GmbH	0.50
A	Potassium Citrate	Potassium Chloride	-	0.50
B	Sorbitol (70%)	SorbitolAqua	-	35.00
C	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	6.00
C	Menthol	Menthol	-	0.10
C	Cosphaderm® GMCY	Glyceryl Caprylate	Cosphatec GmbH	0.30
C	Perlastan® SC	Disodium/Sodium Cocoyl Glutamate	Schill + Seilacher Struktol GmbH	2.00
D	Silica	Silica	-	3.00

Manufacturing Process
Phase A: Combine all ingredients of phase A. Pre-dissolve Cosphaderm® X 34 in glycerol and it to phase A. Stir until completely dissolved.
PhaseB: Add phase B to phase A.
Phase C: Pre-dissolve menthol in Cosphaderm® Propanediol natural and then add to phase A+B with the other raw materials.
Phase D: Add phase D and mix homogeneously.
Adjust pH value to 6.8-7.0.

Specification
Appearance: Transparent, high viscous gel
pH: 6.8 – 7.0
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

REFRESHING MOUTHWASH ALL NATURAL INGREDIENTS

300.80.1.1

NATURAL. MILD. ALCOHOL-FREE.

Alternative preservation: Cosphaderm® Propanediol natural, Cosphaderm® Zinc Lactate natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	82.90
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	5.00
A	Xylitol	Xylitol	-	3.00
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.05
B	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	8.00
B	Menthol	Menthol	-	0.05
C	Dehyton® K	Cocamidopropyl Betaine	BASF SE	0.10
C	Cosphaderm® Zinc Lactate natural	Zinc Lactate	Cosphatec GmbH	0.40
C	Potassium Citrate	Potassium Citrate	-	0.50
D	Cosmetic Colour		-	q.s.

MANUFACTURING PROCESS
Phase A: Combine all ingredients and stir until everything is completely dissolved.
Phase B: Dissolve the menthol in Cosphaderm® Propanediol natural add phase B to phase A under soft stirring.
Phase C: Add all ingredients of phase C and stir until everything is completely dissolved.
Phase D: Add colour if wanted.
Adjust the pH to 7.0 ± 0.05.

SPECIFICATION
Appearance: Transparent solution
pH: 7.0 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

Bodycare

DETOX SEA SALT SCRUB ALL NATURAL INGREDIENTS

300.128.1.1

VEGAN. NOURISHING. ACTIVATING.

Oil protection: Cosphaderm® T-70 NON GMO ECO

PHASE	Ingredient	INCI	SUPPLIER	%
A	Shea Butter refined	Butyrospermum Parkii Butter	Gustav Heess GmbH	12.50
A	Castor Oil	Ricinus Communis Seed Oil	Gustav Heess GmbH	5.00
A	BergaSoft SCI 80	Sodium Cocoyl Isethionate	Berg + Schmidt GmbH & Co. KG	7.00
A	Cosphaderm® Feel	Triheptanoin	Cosphatec GmbH	3.00
A	Jojoba Oil	Simmondsia Chinensis Seed Oil	Gustav Heess GmbH	6.00
A	Cosphaderm® T-70 NON GMO ECO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.50
B	Sea Salt	Maris Sal	-	66.00

Manufacturing Process
Phase A: Combine all the ingredients of phase A and melt, then leave to cool.
Phase B: Add phase B and pour into packaging.
The mixture thickens after a while.

Specification
Appearance: Yellowish paste with salt
Stability: stable for 3 months at room temperature and 40 °C
Microbiological stability: proven (Water activity value less than 0.75)

AFTER SUN LOTION ALL NATURAL INGREDIENTS

200.78.2.1

SOOTHING. HYDRATING. REGENERATING.

Alternative preservation: Cosphaderm® Sodium pAS natural, Cosphaderm® Zinc Lactate, Cosphaderm® Pentiol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	71.90
A	Cosphaderm® Pentiol natural	Pentylene Glycol	Cosphatec GmbH	4.00
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	3.00
A	Cosphaderm® Sodium pAS natural	Sodium Anisate	Cosphatec GmbH	0.30
A	Cosphaderm® Zinc Lactate natural	Zinc Lactate	Cosphatec GmbH	0.50
A	Aloe Vera Powder	Aloe Barbadensis Leaf Juice Powder	-	0.10
A	RonaCare® Ectoin	Ectoin	Merck KGaA	1.00
B	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.50
C	Cosphaderm® GS Connect	Glyceryl Stearate Citrate	Cosphatec GmbH	2.50
C	Lanette® O	Cetearyl Alcohol	BASF SE	1.50
C	MCT Oil Typ V Ph. Eur.	Caprylic/Capric Triglyceride	Gustav Heess GmbH	4.00
C	Cosphaderm® Feel	Triheptanoin	Cosphatec GmbH	2.00
C	Almond Oil	Prunus Amygdalus Dulcis Oil	Gustav Heess GmbH	3.00
C	Sunflower Oil	Helianthus Annuus Seed Oil	Gustav Heess GmbH	3.00
C	Shea Butter refined	Butyrospermum Parkii Butter	Gustav Heess GmbH	2.50
C	Cosphaderm® T-70 NON GMO ECO CC	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.20

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Add Cosphaderm® X 34 while stirring and stir until everything is homogeneous.
Phase C: Combine all ingredients of phase C.
Heat both phases separately to 75 °C and add phase C to A/B while stirring. Homogenise.
Adjust the pH to 5.5 ± 0.05.

SPECIFICATION
Appearance: White, viscous lotion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

IN-SHOWER BODY LOTION ALL NATURAL INGREDIENTS

200.51.2.1

LIGHT SKIN FEEL. HIGH SPREADABILITY. MOISTURISING.

Preservation: Cosphagard® Pol, Cosphaderm® Pentiol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	74.40
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	2.00
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.60
A	Cosphagard® Pol	AquaSodium LevulinatePotassium Sorbate	Cosphatec GmbH	2.00
A	Cosphaderm® Pentiol natural	Pentylene Glycol	Cosphatec GmbH	2.00
B	Sunflower Oil	Helianthus Annuus Seed Oil	Gustav Heess GmbH	4.00
B	Shea Butter refined	Butyrospermum Parkii Butter	Gustav Heess GmbH	4.00
B	MCT Oil Typ V Ph. Eur.	Caprylic/Capric Triglyceride	Gustav Heess GmbH	3.00
B	SOFTISAN® conditionHAIR	PCA Glyceryl Oleate	IOI Oleo GmbH	1.00
B	Macadamia Nut Oil	Macadamia Ternifolia Seed Oil	Gustav Heess GmbH	2.00
B	Softisan® 100	Hydrogenated Coco Glycerides	IOI Oleo GmbH	2.00
B	Ecorol® 16/98 P	Cetyl Alcohol	Ecogreen Oleochemicals	1.00
B	Cosphaderm® GS Connect	Glyceryl Stearate Citrate	Cosphatec GmbH	2.00

Manufacturing Process
Phase A: Combine all ingredients of phase A under stirring and stir until Cosphaderm® X 34 is completely dissolved.
Phase B: Combine all ingredients of phase B.
Heat both phases separately to 70 °C and add phase B to phase A under stirring.
Homogenise the formulation and adjust the pH to 5.5 ± 0.05.

Specification
Appearance: White, shiny lotion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

MOISTURISING BODY YOGHURT

200.9.1.1

HIGH SPREADABILITY. LIGHT SKIN FEEL. SOFTENING.

Alternative preservation: Cosphaderm® Dicapo

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	81.80
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	3.00
A	Cosphaderm® Sodium Hyaluronate	Sodium Hyaluronate	Cosphatec GmbH	0.50
A	Carbopol® Ultrez-21	Acrylates/C10-30 Alkyl Acrylate Crosspolymer	Lubrizol	0.30
B	Imwitor® 375	Glyceryl CitrateLactateLineolateOleate	IOI Oleo GmbH	0.50
B	Cosphaderm® Feel	Triheptanoin	Cosphatec GmbH	13.00
B	Cosphaderm® Dicapo	Caprylyl GlycolGlyceryl CaprylateDipropylene Glycol	Cosphatec GmbH	0.70
B	Cosphaderm® T-70 NON GMO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.20

Manufacturing Process
Phase A: Combine all ingredients of phase A and stir until everything is dissolved.
Phase B: Combine all ingredients of phase B.
Add phase B into phase A and homogenise until everything is dissolved.
Adjust the pH to 6.5 ± 0.05.

Specification
Appearance: White viscous lotion
pH: 6.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

MOISTURISING HAND CREAM

200.74.1.1

SOFTENING. HYDRATING. CONCENTRATED FORMULATION.

Alternative preservation: Cosphagard® Exact

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	83.85
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	7.50
A	Cosphagard® Exact	PhenoxyethanolEthylhexylglycerin	Cosphatec GmbH	1.00
B	Lanette®N	Cetearyl AlcoholSodium Cetearyl Sulfate	BASF SE	5.00
B	Stearic Acid	Stearic Acid	-	1.00
B	Cosphaderm® T-70 NON GMO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.15
C	Demin. Water	Aqua	-	0.50
C	Cosphaderm® Panthenol natural	Panthenol	Cosphatec GmbH	1.00

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Combine all ingredients of phase B.
Heat both phases separately to 70-75 °C and add phase B to A while homogenising.
Phase C: Dissolve Cosphaderm® Panthenol natural in water and add phase C below 40 °C.
Adjust the pH to 5.5 ± 0.05.

SPECIFICATION
Appearance: Translucent high viscous emulsion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

ORGANIC BODY BUTTER ALL NATURAL INGREDIENTS

200.112.1.1

RICH TEXTURE. NATURAL. SOFT.

Alternative preservation: Cosphaderm® Sodium LAAS, Cosphaderm® GMCY

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	62.50
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	4.00
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.40
A	Cosphaderm® Sodium LAAS	Sodium LevulinateSodium Anisate	Cosphatec GmbH	1.00
A	Cosphaderm® PA-12	Sodium Phytate	Cosphatec GmbH	0.10
B	Cosphaderm® GS Connect	Glyceryl Stearate Citrate	Cosphatec GmbH	3.50
B	Cutina® GMS V	Glyceryl Stearate	BASF SE	3.00
B	Lanette® O	Cetearyl Alcohol	BASF SE	4.00
B	Beeswax white	Cera alba	Gustav Heess GmbH	1.00
B	Shea Butter refined	Butyrospermum Parkii Butter	Gustav Heess GmbH	5.00
B	Babassu Oil	Orbignya Oleifera Seed Oil	Gustav Heess GmbH	5.00
B	Sunflower Oil	Helianthus Annuus Seed Oil	Gustav Heess GmbH	3.00
B	Cosphaderm® Feel	Triheptanoin	Cosphatec GmbH	2.00
B	MCT Oil Typ V Ph. Eur.	Caprylic/Capric Triglyceride	Gustav Heess GmbH	5.00
B	Cosphaderm® GMCY	Glyceryl Caprylate	Cosphatec GmbH	0.30
B	Cosphaderm® T-70 NON GMO ECO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.20

SPECIFICATION
Appearance: White high viscous emulsion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

REPAIRING BODY LOTION ALL NATURAL INGREDIENTS

200.127.1.1

RICH. OCCLUSIVE. EXTRA NOURISHING.

Alternative preservation: Cosphaderm® Hexiol natural, Cosphaderm® Sodium pAS natural, Cosphaderm® GMCY

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	60.70
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	4.00
A	Cosphaderm® Hexiol natural	1,2-Hexanediol	Cosphatec GmbH	1.50
A	Cosphaderm® Sodium pAS natural	Sodium Anisate	Cosphatec GmbH	0.20
A	Magnesium Sulfate	Magnesium Sulfate	-	2.00
B	Dehymuls® PGPH	Polyglyceryl-2 Dipolyhydroxystearate	BASF SE	4.00
B	Imwitor® 948	Glyceryl Oleate	IOI Oleo GmbH	1.00
B	Shea Butter refined	Butyrospermum Parkii Butter	Gustav Heess GmbH	5.00
B	Cosphaderm® GMCY	Glyceryl Caprylate	Cosphatec GmbH	0.30
B	MCT Oil Typ V Ph. Eur.	Caprylic/Capric Triglyceride	Gustav Heess GmbH	10.00
B	Miglyol® OE	Oleyl Erucate	IOI Oleo GmbH	6.00
B	Squalane	Squalane	-	2.00
B	Argan Oil	Argania Spinosa Kernel Oil	Gustav Heess GmbH	3.00
B	Cosphaderm® T-70 NON GMO ECO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.30

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Adjust the pH to 5.5 ± 0.05.
Phase B: Combine all ingredients and melt at 40-50 °C. Then add phase A to phase B while homogenising.

SPECIFICATION
Appearance: White viscous lotion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

RICH & SOFT HANDCREAM ALL NATURAL INGREDIENTS

200.4.1.2

REGENERATING. SOFT SKIN FEEL. MOISTURISING.

Alternative preservation: Cosphaderm® MultiMEG

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	76.55
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	2.00
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.25
B	Lamecreme	Glyceryl StearateGlyceryl Stearate Citrate	-	2.50
B	Montanov™ 68	Cetearyl AlcoholCetearyl Glucoside	SEPPIC, S.A.	2.00
B	Tegomuls	Hydrogenated Palm Glyceride	-	0.50
B	Ecorol® 18/98 P	Cetyl Alcohol	Ecogreen Oleochemicals	1.00
B	Beeswax	Cera alba	Gustav Heess GmbH	0.50
B	Carnauba Wax	Copernicia Cerifera Cera	Gustav Heess GmbH	1.00
B	Shea Butter refined	Butyrospermum Parkii Butter	Gustav Heess GmbH	3.00
B	Sunflower Oil	Helianthus Annuus Seed Oil	Gustav Heess GmbH	3.00
B	Peach Kernel Oil	Prunus Persica Kernel Oil	Gustav Heess GmbH	1.50
B	Jojoba Oil	Simmondsia Chinensis Seed Oil	Gustav Heess GmbH	2.50
B	Cosphaderm® T-70 NON GMO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.30
B	Cosphaderm® AP	Ascorbyl Palmitate	Cosphatec GmbH	0.20
B	Cosphaderm® Feel	Triheptanoin	Cosphatec GmbH	2.00
C	Cosphaderm® MultiMEG	Glyceryl CaprylatePentylene GlycolMagnolia Officinalis Bark Extract	Cosphatec GmbH	1.20

Manufacturing Process
Phase A: Mix all ingredients together. Slowly add Cosphaderm® X 34 while stirring. Then heat to 80 °C.
Phase B: Combine all ingredients and heat to 80 °C.
Add phase B to phase A and homogenise.
Phase C: Add Cosphaderm® MultiMEG below 40 °C while stirring.
Adjust the pH to 5.5 ± 0.05.

Specification
Appearance: White, shiny emulsion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

SOOTHING BODY LOTION ALL NATURAL INGREDIENTS

200.126.1.1

VELVET. REGENERATING. FAST-ABSORBING.

Alternative preservation: Cosphaderm® Sodium LAAS, Cosphaderm® Octiol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	77.70
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	2.00
A	Cosphaderm® Sodium LAAS	Sodium LevulinateSodium Anisate	Cosphatec GmbH	1.00
A	Cosphaderm® Octiol natural	Caprylyl Glycol	Cosphatec GmbH	0.30
A	Cosphaderm® X soft	Xanthan Gum	Cosphatec GmbH	0.50
B	Cosphaderm® SF-75H	Hydrogenated Lecithin	Cosphatec GmbH	0.50
C	Cosphaderm® GS Connect	Glyceryl Stearate Citrate	Cosphatec GmbH	2.50
C	Lanette® 16	Cetyl Alcohol	BASF SE	1.20
C	Shea Butter refined	Butyrospermum Parkii Butter	Gustav Heess GmbH	3.00
C	Jojoba Oil	Simmondsia Chinensis Seed Oil	Gustav Heess GmbH	3.00
C	Cetiol® CC	Dicaprylyl Carbonate	BASF SE	2.00
C	MCT Oil Typ V Ph. Eur.	Caprylic/Capric Triglyceride	Gustav Heess GmbH	4.00
C	Squalane	Squalane	-	2.00
D	Cosphaderm® Tocopharin	Carnosic AcidTocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.30

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Add phase B to the water phase while stirring. Then heat the water phase to 70-75 °C.
Phase C: Combine all ingredients of phase C and heat to 75°C.
Add phase C to the water phase while stirring. Add phase D to the emulsion and homogenise.
Adjust the pH to 5.5 ± 0.05.

SPECIFICATION
Appearance: white, slightly beige viscous lotion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

WARMING FOOTCREAM

200.36.1.1

WARMING. BOOSTING BLOOD CIRCULATION. NOURISHING.

Alternative preservation: Cosphaderm® Propanediol natural, Cosphaderm® Magnolia Extract 98, Cosphaderm® GMCY

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	45.10
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	3.00
A	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	3.00
A	Urea	Urea	-	10.00
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.30
B	Lamecreme	Glyceryl StearateGlyceryl Stearate Citrate	-	5.00
B	Lanette® O	Cetearyl Alcohol	BASF SE	3.00
B	Carnauba Wax	Copernicia Cerifera Cera	Gustav Heess GmbH	5.00
B	Beeswax	Cera alba	Gustav Heess GmbH	8.00
B	Shea Butter refined	Butyrospermum Parkii Butter	Gustav Heess GmbH	8.00
B	Cosphaderm® Feel	Triheptanoin	Cosphatec GmbH	8.00
B	Cosphaderm® VBE	Vanillyl Butyl Ether	Cosphatec GmbH	0.50
B	Cosphaderm® GMCY	Glyceryl Caprylate	Cosphatec GmbH	0.80
B	Cosphaderm® Magnolia Extract 98	Magnolia Officinalis Bark Extract	Cosphatec GmbH	0.30

Manufacturing Process
Phase A: Combine all ingredients of phase A. Slowly add Cosphaderm® X 34 to phase A and stir until completely dissolved.
Phase B: Combine all ingredients of phase B.
Heat both phases separately to 80-85 °C.
Add phase B to phase A under strong stirring and homogenise the formulation.
Adjust pH to 5.5 ± 0.05.

Specification
Appearance: Shiny, off-white high viscous cream
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

DEODORANT CREAM ALL NATURAL INGREDIENTS

200.76.1.1

VEGAN. REFRESHING. NOURISHING.

Alternative preservation: Cosphaderm® GMCY, Cosphaderm® Zinc Lactate natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Lanette® 16	Cetyl Alcohol	BASF SE	10.50
A	Candellila Wax	Euphorbia Cerifera (Candelilla) Wax	-	7.20
A	Shea Butter refined	Butyrospermum Parkii Butter	Gustav Heess GmbH	10.00
A	Cocoa Butter	Theobroma Cacao Seed Butter	Gustav Heess GmbH	10.00
A	MCT Oil Typ V Ph. Eur.	Caprylic/Capric Triglyceride	Gustav Heess GmbH	17.50
A	Almond Oil	Prunus Amygdalus Dulcis Oil	Gustav Heess GmbH	4.00
A	Cosphaderm® GMCY	Glyceryl Caprylate	Cosphatec GmbH	1.00
B	Cosphaderm® T-70 NON GMO ECO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.30
B	Cosphaderm® Zinc Lactate natural	Zinc Lactate	Cosphatec GmbH	2.00
B	Sodium Bicarbonate	Sodium Bicarbonate	-	8.00
B	Corn Starch	Zea Mays Starch	-	29.50

MANUFACTURING PROCESS
Combine all ingredients of phase A, heating to 75 °C. When everything has melted, add phase B. Take off heat and fill into packaging.

SPECIFICATION
Appearance: Solid, yellowish balm
Stability: stable for 3 months at room temperature and 40 °C
Microbiological stability: proven (Water activity value less than 0.75)

DEODORANT ROLL-ON

200.131.1.1

PROTECTING. SMOOTHING. VEGAN.

Alternative preservation: Cosphaderm® Propanediol natural, Cosphaderm® Zinc Lactate natural, Cosphaderm® Octiol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	76.90
A	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	8.00
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	3.00
A	Cosphaderm® Zinc Lactate natural	Zinc Lactate	Cosphatec GmbH	0.40
A	Natrosol® 250 HX	Hydroxyethylcellulose	-	0.50
B	PolyAquol®-2W	Polyglyceryl-2 StearateStearyl AlcoholGlyceryl Stearate	Innovacos	2.50
B	Cosphaderm® Octiol natural	Caprylyl Glycol	Cosphatec GmbH	0.40
B	Salvia Officinalis (Sage) Oil	Salvia Officinalis (Sage) Oil	-	0.05
B	Triethylcitrate	Triethylcitrate	-	2.25
B	MCT Oil Typ V Ph. Eur.	Caprylic/Capric Triglyceride	Gustav Heess GmbH	6.00

Manufacturing Process
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Combine all ingredients of phase B.
Heat both phases separately to 75 °C and add phase B to A while stirring very fast. Homogenise.
Adjust the pH to 5.0 ± 0.05.

Specification
Appearance: White viscous lotion
pH: 5.0 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

MenCare

CAFFEINE SHAMPOO FOR MEN ALL NATURAL INGREDIENTS

600.55.2.1

NURTURING. VITALISING. BOOSTING HAIR GROWTH.

Preservation: Cosphagard® Pol

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	60.50
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	6.00
A	Natural Caffeine Green	Caffeine	-	1.00
A	Zinc PCA	Zinc PCA	-	0.30
A	Cosphaderm® Panthenol natural	Panthenol	Cosphatec GmbH	1.00
A	Hydrolyzed Wheat Protein	Hydrolyzed Wheat Protein	-	1.00
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	1.00
A	Cosphagard® Pol	AquaSodium LevulinatePotassium Sorbate	Cosphatec GmbH	2.00
B	Plantacare® 1200 UP	Lauryl Glucoside	BASF SE	10.40
B	Plantacare® 818 UP	Coco Glucoside	BASF SE	10.60
B	Dehyton® K	Cocamidopropyl Betaine	BASF SE	3.20
B	Imwitor® PG3 C10	Polyglyceryl-3 Caprate	IOI Oleo GmbH	1.50
B	SOFTISAN® conditionHAIR	PCA Glyceryl Oleate	IOI Oleo GmbH	1.50

ACTIVATING BEARD SHAMPOO ALL NATURAL INGREDIENTS

600.132.1.1

STIMULATING. CLEANSING. CONDITIONING.

Alternative preservation: Cosphaderm® Pentiol natural, Cosphaderm® Zinc Lactate natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	78.70
A	Cosphaderm® Pentiol natural	Pentylene Glycol	Cosphatec GmbH	3.00
A	Sulfopon® 1216 G	Sodium Coco Sulfate	BASF SE	4.00
A	Natural Caffeine Green	Caffeine	-	1.00
B	Cosphaderm® X soft	Xanthan Gum	Cosphatec GmbH	1.20
B	Cosphaderm® Zinc Lactate natural	Zinc Lactate	Cosphatec GmbH	0.50
C	Dehyton® K	Cocamidopropyl Betaine	BASF SE	6.00
C	Plantacare® 818 UP	Coco Glucoside	BASF SE	4.00
C	Imwitor® 948	Glyceryl Oleate	IOI Oleo GmbH	1.00
C	Argan Oil	Argania Spinosa Kernel Oil	Gustav Heess GmbH	0.50
C	Cosphaderm® Tocopharin	Carnosic AcidTocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.10

Manufacturing Process
Phase A: Combine all ingredients and dissolve Phase A at 40°C. Adjust the pH below 7.
Phase B: Add phase B to phase A under stirring and stir until everything is completely dissolved.
Phase C: Prepare phase C and add to phase A+B under slow stirring to prevent foaming.
Adjust the pH to 5.5 ± 0.05.

Specification
Appearance: Slightly cloudy viscous gel
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

AFTER SHAVE FLUID ALL NATURAL INGREDIENTS

600.105.1.1

FAST ABSORBING. HYDRATING. COOLING.

Alternative preservation: Cosphaderm® Hexiol natural, Cosphaderm® GMCY

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	80.50
A	Aloe Vera Powder	Aloe Barbadensis Leaf Juice Powder	-	0.10
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	5.00
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.40
A	Cosphaderm® Sodium Hyaluronate	Sodium Hyaluronate	Cosphatec GmbH	0.10
B	Montanov™ 202	Arachidyl AlcoholBehenyl AlcoholArachidyl Glucoside	SEPPIC, S.A.	5.00
B	Cosphaderm® GMCY	Glyceryl Caprylate	Cosphatec GmbH	0.30
B	Bisabolol	Bisabolol	-	0.30
B	MCT Oil Typ V Ph. Eur.	Caprylic/Capric Triglyceride	Gustav Heess GmbH	5.00
C	Cosphaderm® Hexiol natural	1,2-Hexanediol	Cosphatec GmbH	2.00
C	Menthol	Menthol	-	0.30
D	Demin. Water	Aqua	-	0.50
D	Cosphaderm® Panthenol natural	Panthenol	Cosphatec GmbH	0.50

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Heat to 70-75 °C.
Phase B: Combine all ingredients and heat to 75 °C. Add then phase B to phase A under strong stirring and homogenise.
Phase C: Dissolve the menthol in Cosphaderm® Hexiol natural and add below 40°C.
Phase D: Dissolve Cosphaderm® Panthenol natural in water and add phase D below 40 °C.
Adjust the pH to 5.5 ± 0.05.

BEARD BALM ALL NATURAL INGREDIENTS

600.34.1.1

NOURISHING. CONDITIONING. STYLING.

Oil protection: Cosphaderm® T-70 NON GMO ECO, Cosphaderm® GeMix

PHASE	Ingredient	INCI	SUPPLIER	%
A	Shea Butter refined	Butyrospermum Parkii Butter	Gustav Heess GmbH	36.30
A	Mango Butter	Mangifera Indica Seed Butter	-	23.00
A	Wool Fat	Lanolin	Gustav Heess GmbH	8.00
A	Apricot Kernel Oil	Prunus Armeniaca Kernel Oil	Gustav Heess GmbH	10.30
A	Jojoba Oil	Simmondsia Chinensis Seed Oil	Gustav Heess GmbH	8.00
A	Beeswax	Cera alba	Gustav Heess GmbH	7.00
A	Cocoa Butter	Theobroma Cacao Seed Butter	Gustav Heess GmbH	6.00
A	Cosphaderm® T-70 NON GMO ECO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.20
A	Cosphaderm® GeMix	Glyceryl CaprylateGlyceryl Undecylenate	Cosphatec GmbH	1.20

Manufacturing Process
Phase A: Prepare phase A and heat to 70 °C until fully melted. Stir until completely dissolved.
Pour into container and let it cool down.

Specification
Appearance: Yellow balm
Stability: stable for 3 months at room temperature and 40 °C
Microbiological stability: proven (Water activity value less than 0.75)

BEARD WAX ALL NATURAL INGREDIENTS

600.125.1.1

STYLING. NOURISHING. LIGHT TEXTURE.

Oil protection: Cosphaderm® Tapmix

PHASE	Ingredient	INCI	SUPPLIER	%
A	Lanette®N	Sodium Cetearyl SulfateCetearyl Alcohol	BASF SE	37.00
A	Kahlwax 6607L	Helianthus Annuus Seed Cera	Kahl GmbH & Co. KG	7.00
A	Shea Butter refined	Butyrospermum Parkii Butter	Gustav Heess GmbH	10.00
A	Castor Oil	Ricinus Communis Seed Oil	Gustav Heess GmbH	35.50
A	Cosphaderm® Feel	Triheptanoin	Cosphatec GmbH	5.00
A	Argan Oil	Argania Spinosa Kernel Oil	Gustav Heess GmbH	5.00
A	Cosphaderm® Tapmix	LecithinHelianthus Annuus Seed OilTocopherolAscorbyl Palmitate	Cosphatec GmbH	0.50

MANUFACTURING PROCESS
Combine all ingredients of phase A and melt until everything is homogeneous.
Pour into packaging and let it cool down.

SPECIFICATION
Appearance: Yellowish beige, firm wax
Stability: Stable for 3 months at room temperature and 40 °C
Microbiological stability: proven (Water activity value less than 0.75)

FRESH & COOL AFTERSHAVE

600.37.1.1

COOLING. SOOTHING. MOISTURISING.

Alternative preservation: Cosphaderm® MultiMEG, Cosphaderm® Propanediol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	67.55
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	3.00
A	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	3.00
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.20
A	Ronacare® Allantoin	Allantoin	Merck KGaA	0.20
A	Aristoflex® AVC	Ammonium Acryloyldimethyltaurate/ VP Copolymer	Clariant AG	0.50
B	Lamecreme	Glyceryl StearateGlyceryl Stearate Citrate	-	4.00
B	Shea Butter refined	Butyrospermum Parkii Butter	Gustav Heess GmbH	2.00
B	Cosphaderm® Feel	Triheptanoin	Cosphatec GmbH	3.50
B	Jojoba Oil	Simmondsia Chinensis Seed Oil	Gustav Heess GmbH	4.00
B	Olive Oil	Olea Europaea Fruit Oil	Gustav Heess GmbH	2.50
B	Almond Oil	Prunus Amygdalus Dulcis Oil	Gustav Heess GmbH	2.00
B	Avocado Oil	Persea Gratissima Oil	Gustav Heess GmbH	2.00
B	Sesame Oil	Sesamum Indicum Seed Oil	Gustav Heess GmbH	2.00
B	Carotene Oil	Glycine Soja Oilbeta-carotene	-	0.05
B	Cocoa Butter	Theobroma Cacao Seed Butter	Gustav Heess GmbH	0.20
B	Cosphaderm® T-70 NON GMO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.30
B	Camphor	Camphor	-	0.10
C	Ethanol	Alcohol	-	0.60
C	Menthol	Menthol	-	0.70
D	Cosphaderm® MultiMEG	Glyceryl CaprylatePentylene GlycolMagnolia Officinalis Bark Extract	Cosphatec GmbH	1.60

Manufacturing Process
Phase A: Combine all ingredients of phase A and stir until completely dissolved.
Phase B: Prepare phase B and separately heat phase A and phase B to 80 °C. Add phase B to phase A while stirring.
Phase C+D: Add phase C and D below 40 °C. Homogenise.
Adjust pH to 5.5 ± 0.05.

Specification
Appearance: Slightly yellowish, viscous cream
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

MOVEMBER BEARD OIL ALL NATURAL INGREDIENTS

600.87.1.1

NOURISHING. CONDITIONING. NON-GREASY OIL.

Oil protection: Cosphaderm® T-70 NON GMO ECO

PHASE	Ingredient	INCI	SUPPLIER	%
A	Jojoba Oil	Simmondsia Chinensis Seed Oil	Gustav Heess GmbH	30.00
A	Castor Oil	Ricinus Communis Seed Oil	Gustav Heess GmbH	20.00
A	Squalane	Squalane	-	5.00
A	Almond Oil	Prunus Amygdalus Dulcis Oil	Gustav Heess GmbH	12.50
A	Argan Oil	Argania Spinosa Kernel Oil	Gustav Heess GmbH	5.00
A	MCT Oil Typ V Ph. Eur.	Caprylic/Capric Triglyceride	Gustav Heess GmbH	27.30
A	Cosphaderm® T-70 NON GMO ECO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.20

MANUFACTURING PROCESS
Phase A: Mix all ingredients together and stir until homogeneous.

SPECIFICATION
Appearance: Yellow liquid
Stability: stable for 3 months at room temperature and 40 °C
Microbiological stability: proven (Water activity value less than 0.75)

NOURISHING SHAVING OIL ALL NATURAL INGREDIENTS

600.124.1.1

PRECISE SHAVING. MILD. GENTLE.

Oil protection: Cosphaderm® Tocopharin

PHASE	Ingredient	INCI	SUPPLIER	%
A	Softigen® Pura	Olus Oil	IOI Oleo GmbH	40.00
A	MCT Oil Typ V Ph. Eur.	Caprylic/Capric Triglyceride	Gustav Heess GmbH	30.00
A	Cosphaderm® Feel	Triheptanoin	Cosphatec GmbH	12.40
A	Almond Oil	Prunus Amygdalus Dulcis Oil	Gustav Heess GmbH	10.00
A	Babassu Oil	Orbignya Oleifera Seed Oil	Gustav Heess GmbH	5.00
A	Argan Oil	Argania Spinosa Kernel Oil	Gustav Heess GmbH	2.00
A	Cosphaderm® Octiol natural	Caprylyl Glycol	Cosphatec GmbH	0.30
A	Cosphaderm® Tocopharin	Carnosic AcidTocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.30

MANUFACTURING PROCESS
Combine all ingredients of phase A and melt until everything is homogeneous.

SPECIFICATION
Appearance: Cloudy, thickened oil
Stability: Stable for 3 months at room temperature and 40 °C
Microbiological stability: proven (Water activity value less than 0.75)

REVITALISING DAY CREAM FOR MEN ALL NATURAL INGREDIENTS

600.79.1.1

COOLING. HYDRATING. REFRESHING.

Alternative preservation: Cosphaderm® pAS natural, Cosphaderm® Octiol natural, Cosphaderm® Propanediol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	78.50
A	Cosphaderm® pAS natural	p-Anisic Acid	Cosphatec GmbH	0.20
B	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	3.00
B	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	2.50
B	Cosphaderm® Octiol natural	Caprylyl Glycol	Cosphatec GmbH	0.50
B	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.40
C	PolyAquol®-2W	Polyglyceryl-2 StearateGlyceryl StearateStearyl Alcohol	Innovacos	3.50
C	Lanette® O	Cetearyl Alcohol	BASF SE	1.50
C	Babassu Oil	Orbignya Oleifera Seed Oil	Gustav Heess GmbH	5.00
C	Cosphaderm® Feel	Triheptanoin	Cosphatec GmbH	3.00
C	Shea Butter refined	Butyrospermum Parkii Butter	Gustav Heess GmbH	1.00
C	Cosphaderm® T-70 NON GMO ECO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.20
D	Ethanol	Alcohol	-	0.50
D	Menthol	Menthol	-	0.20

MANUFACTURING PROCESS
Phase A: Prepare phase A. Raise the pH to 10 to dissolve Cosphaderm® pAS natural and stir until everything is completely dissolved. Afterwards, adjust the pH to 5.5 ± 0.05 by adding Citric Acid.
Phase B: Add all ingredients of phase B to phase A. Then heat phase A+B to 75 °C.
Phase C: Combine all ingredients and heat to 75 °C. Add then phase C to phase A+B under strong stirring and homogenise.
Phase D: Dissolve menthol in ethanol and add phase D below 40°C.
Adjust the pH to 5.5 ± 0.05.

SPECIFICATION
Appearance: White viscous emulsion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

Babycare

BABY BATH ALL NATURAL INGREDIENTS

500.31.3.1

GENTLE CLEANSING. MILD. FOAMY.

Alternative Preservation: Cosphaderm® Pentiol natural, Cosphaderm® GeMix

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	55.70
A	Cinnamic Acid	Cinnamic Acid	-	0.30
B	Cosphaderm® Pentiol natural	Pentylene Glycol	Cosphatec GmbH	2.00
B	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	1.00
C	Cosphaderm® E NGM	Lysolecithin	Cosphatec GmbH	5.00
D	Plantacare® 818 UP	Coco Glucoside	BASF SE	10.00
D	Plantacare® 2000 UP	Decyl Glucoside	BASF SE	25.00
D	Cosphaderm® GeMix	Glyceryl CaprylateGlyceryl Undecylenate	Cosphatec GmbH	1.00

Manufacturing Process
Phase A: Combine all ingredients of phase A and raise the pH to 11 under stirring to dissolve cinnamic acid. Afterwards, adjust the pH to 5.5 ± 0.05 by adding Citric Acid.
Phase B: Add phase B to phase A and stir until everything is completely dissolved.
Heat phase A+B to 60 °C and add phase C under strong stirring.
Phase D: Add phase D to phase A+B below 40 °C.
Adjust the pH to 5.5 ± 0.05.

Specification
Appearance: Transparent, yellow gel
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

BABY SHOWER CREAM ALL NATURAL INGREDIENTS

500.116.1.2

MILD CLEANSING. GENTLE SKIN FEEL. VEGAN.

Alternative preservation: Cosphaderm® Sodium LAAS

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	51.00
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	3.00
A	Cosphaderm® Sodium LAAS	Sodium LevulinateSodium Anisate	Cosphatec GmbH	1.00
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.80
B	Dehyton® K	Decyl Glucoside	BASF SE	6.00
B	Perlastan® SC	Disodium/Sodium Cocoyl Glutamate	Schill + Seilacher Struktol GmbH	8.00
B	Plantacare® 818 UP	Coco Glucoside	BASF SE	5.00
C	Almond Oil	Prunus Amygdalus Dulcis Oil	Gustav Heess GmbH	10.00
C	Sunflower Oil	Helianthus Annuus Seed Oil	Gustav Heess GmbH	15.00
C	Cosphaderm® T-70 NON GMO ECO CC	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.20

Manufacturing Process
Phase A: Combine all ingredients of phase A.
Phase B: Prepare phase B and add to phase A under slow stirring to prevent foaming. Heat to 60 °C.
Phase C: Combine all ingredients of phase C and heat to 60 °C.
Add phase C to phase A/B and homogenise.
Adjust pH to 5.5 ± 0.05.

Specification
Appearance: White emulsion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

NATURAL MILD & FOAMY BABY SHAMPOO ALL NATURAL INGREDIENTS

500.30.2.1

GENTLE CLEANSING. MILD. VEGAN.

Alternative preservation: Cosphaderm® Hexiol natural, Cosphaderm® Pentiol natural, Cosphaderm® Propanediol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	74.00
A	Cosphaderm® Hexiol natural	1,2-Hexanediol	Cosphatec GmbH	2.50
A	Cosphaderm® Pentiol natural	Pentylene Glycol	Cosphatec GmbH	2.50
A	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	4.00
A	Cosphaderm® Panthenol natural	Panthenol	Cosphatec GmbH	1.00
B	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	1.00
C	Plantacare® 818 UP	Coco Glucoside	BASF SE	5.00
C	Plantacare® 2000 UP	Decyl Glucoside	BASF SE	10.00

MILD & FOAMY BABY SHAMPOO

500.30.1.1

GENTLE CLEANSING. MILD. VEGAN.

Alternative preservation: Cosphaderm® Hexiol, Cosphaderm® Pentiol GL, Cosphaderm® Propanediol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	74.00
A	Cosphaderm® Hexiol	1,2-Hexanediol	Cosphatec GmbH	2.50
A	Cosphaderm® Pentiol GL	Pentylene Glycol	Cosphatec GmbH	2.50
A	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	4.00
A	Cosphaderm® Panthenol natural	Panthenol	Cosphatec GmbH	1.00
B	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	1.00
C	Plantacare® 818 UP	Coco Glucoside	BASF SE	5.00
C	Plantacare® 2000 UP	Decyl Glucoside	BASF SE	10.00

CALENDULA BABY LOTION ALL NATURAL INGREDIENTS

500.63.1.1

SOOTHING. SOFTENING. SOFT TEXTURE.

Alternative preservation: Cosphaderm® TOM

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	68.70
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	5.00
A	Ronacare® Allantoin	Allantoin	Merck KGaA	0.30
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.30
B	PolyAquol®-2W	Polyglyceryl-2 StearateGlyceryl StearateStearyl Alcohol	Innovacos	4.00
B	Softisan® 100	Hydrogenated Coco Glycerides	IOI Oleo GmbH	2.00
B	Sesame Oil	Sesamum Indicum Seed Oil	Gustav Heess GmbH	6.00
B	Almond Oil	Prunus Amygdalus Dulcis Oil	Gustav Heess GmbH	6.00
B	Calendula Oil	Glycine Soja OilCalendula Officinalis Flower ExtractTocopherol	-	5.00
B	Cocoa Butter	Theobroma Cacao Seed Butter	Gustav Heess GmbH	1.00
B	Cosphaderm® T-70 NON GMO ECO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.10
C	Cosphaderm® TOM	Pentylene GlycolGlyceryl CaprylateGlyceryl Undecylenate	Cosphatec GmbH	1.60

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Heat phase A to 80°C.
Phase B: Prepare phase B and heat to 80°C. Add phase B to A under stirring.
Phase C: Add phase C below 40°C to the formulation. Homogenise.
Adjust the pH value to 5.5 ± 0.05.

SPECIFICATION
Appearance: White to slightly yellowish lotion
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

CALMING BABY LOTION ALL NATURAL INGREDIENTS

500.43.2.1

NATURALLY MILD. SOOTHING. MOISTURISING.

Alternative preservation: Cosphaderm® LA-T, Cosphaderm® GMCY

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	80.60
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	3.00
A	Cinnamic Acid	Cinnamic Acid	-	0.20
A	Cosphaderm® LA-T	Levulinic AcidGlycerinSodium LevulinateAqua	Cosphatec GmbH	1.00
B	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.30
B	Cosphaderm® Sodium Hyaluronate high	Sodium Hyaluronate	Cosphatec GmbH	0.20
C	PolyAquol®-2W	Polyglyceryl-2 StearateGlyceryl StearateStearyl Alcohol	Innovacos	2.50
C	Lanette® 16	Cetyl Alcohol	BASF SE	1.00
C	Cosphaderm® SF-75H	Hydrogenated Lecithin	Cosphatec GmbH	2.00
C	Beeswax white	Cera alba	Gustav Heess GmbH	2.50
C	Shea Butter refined	Butyrospermum Parkii Butter	Gustav Heess GmbH	3.00
C	Argan Oil	Argania Spinosa Kernel Oil	Gustav Heess GmbH	2.00
C	Cosphaderm® Feel	Triheptanoin	Cosphatec GmbH	1.00
C	Cosphaderm® T-70 NON GMO ECO CC	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.20
C	Cosphaderm® GMCY	Glyceryl Caprylate	Cosphatec GmbH	0.50

Manufacturing Process
Phase A: Combine all ingredients of phase A and raise the pH to 11 under stirring to dissolve cinnamic acid. When everything is dissolved, lower the pH back to 6 again.
Add phase B to A and stir until everything is dissolved. Heat phase A/B to 75 °C.
Phase C: Combine all ingredients and heat to 80 °C. Add then phase C to phase A/B under strong stirring and homogenise.
Adjust the pH to 5.5 ± 0.05.

Specification
Appearance: White viscous emulsion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

PROTECTIVE BABY CREAM ALL NATURAL INGREDIENTS

500.24.2.3

SKIN PROTECTING. SENSITIVE. OCCLUSIVE.

Alternative preservation: Cosphaderm® Sodium LAAS

PHASE	Ingredient	INCI	SUPPLIER	%
	Beeswax white	Cera alba	Gustav Heess GmbH	9.00
A	Lanolin	Lanolin	-	19.00
A	Shea Butter refined	Butyrospermum Parkii Butter	Gustav Heess GmbH	15.00
A	Babassu Oil	Orbignya Oleifera Seed Oil	Gustav Heess GmbH	4.00
A	Almond Oil	Prunus Amygdalus Dulcis (Sweet Almond)	Gustav Heess GmbH	12.00
A	Sesame Oil	Sesamum Indicum (Sesame)	Gustav Heess GmbH	6.00
A	Cosphaderm® Feel	Triheptanoin	Cosphatec GmbH	10.00
A	Cosphaderm® T-70 NON GMO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.50
B	Demin. Water	Aqua	-	23.50
B	Cosphaderm® Sodium LAAS	Sodium LevulinateSodium Anisate	Cosphatec GmbH	1.00

Manufacturing Process
Phase A: Combine all ingredients of phase A.
Phase B: Combine all ingredients of phase B in a separate beaker. Adjust the pH to 5.5 ± 0.05.
Heat both phases separately to 70 °C. Add phase B slowly to phase A under soft stirring.

Specification
Appearance: Yellowish balm-cream
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

SOOTHING BABY OIL ALL NATURAL INGREDIENTS

500.130.1.1

VEGAN. PROTECTING. SMOOTHING.

Oil protection: Cosphaderm® T-70 NON GMO ECO CC

PHASE	Ingredient	INCI	SUPPLIER	%
A	MCT Oil Typ V Ph. Eur.	Caprylic/Capric Triglyceride	Gustav Heess GmbH	62.60
A	Almond Oil	Prunus Amygdalus Dulcis Oil	Gustav Heess GmbH	20.00
A	Cetiol® CC	Dicaprylyl Carbonate	BASF SE	15.00
A	Camellia Seed Oil	Camellia Oleifera Seed Oil	-	2.00
A	Bisabolol	Bisabolol	-	0.20
A	Cosphaderm® T-70 NON GMO ECO CC	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.20

Manufacturing Process
Phase A: Combine all ingredients and stir until everything is homogeneous.

WOUND PROTECTION CREAM ALL NATURAL INGREDIENTS

500.97.1.1

SOOTHING. SKIN PROTECTING. GENTLE.

Alternative preservation: Cosphaderm® Sodium LAAS, Cosphaderm® Pentiol natural, Cosphaderm® GMUD

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	63.70
A	Cosphaderm® Panthenol natural	Panthenol	Cosphatec GmbH	1.00
A	Cosphaderm® Pentiol natural	Pentylene Glycol	Cosphatec GmbH	3.00
A	Cosphaderm® Sodium LAAS	Sodium LevulinateSodium Anisate	Cosphatec GmbH	1.20
A	Magnesium Sulfate	Magnesium Sulfate	-	0.70
B	Imwitor® 600	Polyglyceryl-3 Polyricinoleate	IOI Oleo GmbH	3.50
B	Beeswax white	Cera alba	-	1.00
B	Shea Butter refined	Butyrospermum Parkii Butter	Gustav Heess GmbH	6.00
B	MCT Oil Typ V Ph. Eur.	Caprylic/Capric Triglyceride	Gustav Heess GmbH	6.00
B	Cosphaderm® GMUD	Glyceryl Undecylenate	Cosphatec GmbH	0.60
B	Almond Oil	Prunus Amygdalus Dulcis Oil	Gustav Heess GmbH	8.00
B	Cosphaderm® T-70 NON GMO ECO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.30
B	Zinc Oxide	Zinc Oxide	-	5.00

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Adjust the pH to 5.5 ± 0.05.
Phase B: Combine all ingredients of phase B.
Heat phase B to 80 °C and slowly add phase A to B while homogenising.

SPECIFICATION
Appearance: White low viscous lotion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

Sun & Color Care

NATURAL MINERAL SUN LOTION ALL NATURAL INGREDIENTS

800.108.1.1

CALCULATED SPF 20-30. NATURAL SPF FILTER. WATER RESISTANT.

Alternative preservation: Cosphaderm® GeMix

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	42.20
A	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	5.00
A	Sodium Chloride	Sodium Chloride	-	0.50
A	Potassium Citrate	Potassium Citrate	-	0.40
B	Imwitor® 600	Polyglyceryl-3 Polyricinoleate	IOI Oleo GmbH	3.50
B	Lanette® O	Cetearyl Alcohol	BASF SE	3.00
B	Coconut Oil	Coco Nucifera Oil	Gustav Heess GmbH	3.00
B	MCT Oil Typ V Ph. Eur.	Caprylic/Capric Triglyceride	Gustav Heess GmbH	8.00
B	Cosphaderm® Feel	Triheptanoin	Cosphatec GmbH	8.00
B	Cosphaderm® T-70 NON GMO ECO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.20
B	Cosphaderm® GeMix	Glyceryl CaprylateGlyceryl Undecylenate	Cosphatec GmbH	1.20
C	ZinClear® XP 65 Coco	Zinc OxideCoco-Caprylate / CapratePolyglyceryl-3 PolyricinoleateIsostearic Acid	Lehmann&Voss&Co. KG	25.00

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A. Stir until everything is completely dissolved. Afterwards, adjust the pH to 5.5 ± 0.05.
Phase B: Combine all ingredients and heat to 75-80 °C. Then add phase B to phase A while homogenising.
Add phase C to the finished formulation and homogenise.

SPECIFICATION
Appearance: White low viscous emulsion
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

BI-PHASE MAKE-UP REMOVER ALL NATURAL INGREDIENTS

300.110.1.1

GENTLE. CLEANSING. REGENERATING.

Alternative preservation: Cosphaderm® Sodium LAAS, Cosphaderm® GMCY

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	68.40
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	5.00
A	Sodium PCA	Sodium PCA	-	0.50
A	Sodium Chloride	Sodium Chloride	-	0.50
A	Cosphaderm® Sodium LAAS	Sodium LevulinateSodium Anisate	Cosphatec GmbH	1.00
A	Cosphaderm® Sodium Hyaluronate low	Sodium Hyaluronate	Cosphatec GmbH	0.10
B	Jojoba Oil	Simmondsia Chinensis Seed Oil	Gustav Heess GmbH	10.00
B	Almond Oil	Prunus Amygdalus Dulcis Oil	Gustav Heess GmbH	7.00
B	Cetiol® CC	Dicaprylyl Carbonate	BASF SE	4.00
B	Rosehip Seed Oil	Rosa Canina Fruit Oil	Gustav Heess GmbH	3.00
B	Cosphaderm® GMCY	Glyceryl Caprylate	Cosphatec GmbH	0.30
B	Cosphaderm® T-70 NON GMO ECO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.20

Specification
Appearance: Two-phase system with yellowish oil phase on top of a clear water phase
pH: 5.5 ± 0.05
Stability: stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

COLOR & CARE LIPSTICK ALL NATURAL INGREDIENTS

700.111.1.1

VEGAN. SATIN-SOFT FINISH. NOURISHING.

Alternative preservation: Cosphaderm® MultiMEG

PHASE	Ingredient	INCI	SUPPLIER	%
A	Shea Butter refined	Butyrospermum Parkii Butter	Gustav Heess GmbH	9.90
A	Carnauba Wax	Copernicia Cerifera Cera	Gustav Heess GmbH	6.00
A	Kahlwax 6290	Rhus Verniciflua Cera	Kahl GmbH & Co. KG	4.00
A	Kahlwax 6607L	Helianthus Annuus Seed Cera	Kahl GmbH & Co. KG	10.00
A	MCT Oil Typ V Ph. Eur.	Caprylic/Capric Triglyceride	Gustav Heess GmbH	17.00
A	Octyldodecanol	Octyldodecanol	-	15.00
B	Castor Oil	Ricinus Communis Seed Oil	Gustav Heess GmbH	20.00
B	Cosphaderm® MultiMEG	Glyceryl CaprylatePentylene GlycolMagnolia Officinalis Bark Extract	Cosphatec GmbH	0.80
B	Unipure Red LC 381	CI 77491	SENSIENT BEAUTY	6.00
B	Zinc Oxide	CI 77947	-	5.00
B	Unipure Yellow LC 182	CI 77492	SENSIENT BEAUTY	1.00
B	Cosphaderm® Tocopharin	TocopherolHelianthus Annuus Seed OilCarnosic Acid	Cosphatec GmbH	0.30
C	CORN PO4 PH "B“	Distarch Phosphate	Agrana	5.00

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and heat to 80-85°C until everything is melted.
Phase B: Disperse phase B. Then add phase B to phase A.
Phase C: Add phase C to the finished formulation and melt again.
Pour into molds.

SPECIFICATION
Appearance: Red stick
Stability: stable for 3 months at room temperature and 40 °C
Microbiological stability: proven (Water activity value less than 0.75)

SOFT & CREAMY LIPSTICK ALL NATURAL INGREDIENTS

700.133.1.1

BERRY COLOUR. SATIN-SOFT FINISH. NOURISHING.

Alternative preservation: Cosphaderm® MultiMEG

PHASE	Ingredient	INCI	SUPPLIER	%
A	Shea Butter refined	Butyrospermum Parkii Butter	Gustav Heess GmbH	5.00
A	Carnauba Wax	Copernicia Cerifera Cera	Gustav Heess GmbH	5.00
A	Kahlwax 6290	Rhus Verniciflua Cera	Kahl GmbH & Co. KG	4.00
A	Kahlwax 6607L	Helianthus Annuus Seed Cera	Kahl GmbH & Co. KG	10.00
A	MCT Oil Typ V Ph. Eur.	Caprylic/Capric Triglyceride	Gustav Heess GmbH	26.40
A	Octyldodecanol	Octyldodecanol	-	15.00
B	Cosphaderm® MultiMEG	Glyceryl CaprylatePentylene GlycolMagnolia Officinalis Bark Extract	Cosphatec GmbH	0.80
B	Unipure Red LC 381	CI 77491	SENSIENT BEAUTY	1.50
B	Manganese Violett	CI 77742	-	15.00
B	Zinc Oxide	CI 77947	-	3.00
B	Cosphaderm® Tocopharin	TocopherolHelianthus Annuus Seed OilCarnosic Acid	Cosphatec GmbH	0.30
C	Rice Starch	Oryza Sativa Starch	-	5.00

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and heat to 80-85°C until everything is melted.
Phase B: Add phase B to phase A.
Phase C: Add phase C to the finished formulation.
Pour into molds.

SPECIFICATION
Appearance: Berry-coloured stick
Stability: stable for 3 months at room temperature and 40 °C
Microbiological stability: proven (Water activity value less than 0.75)

CREAMY BLUSH STICK ALL NATURAL INGREDIENTS

700.107.1.1

SOFT TEXTURE. MATT FINISH. VEGAN.

Oil protection: Cosphaderm® T-70 NON GMO ECO

PHASE	Ingredient	INCI	SUPPLIER	%
A	MCT Oil Typ V Ph. Eur.	Caprylic/Capric Triglyceride	Gustav Heess GmbH	27.20
A	Cetiol® OE	Dicaprylyl Ether	BASF SE	15.00
A	Kahlwax 6607L	Helianthus Annuus Seed Cera	Kahl GmbH & Co. KG	6.00
A	Candellila Wax	Euphorbia Cerifera (Candelilla) Wax	Gustav Heess GmbH	6.00
A	Hydrogenated Vegetable Oil	Hydrogenated Vegetable Oil	-	15.00
A	Cosphaderm® Octiol natural	Caprylyl Glycol	Cosphatec GmbH	0.50
B	Cosphaderm® SF-75H	Hydrogenated Lecithin	Cosphatec GmbH	2.00
B	Sensocel® bc 20	Cellulose	CFF GmbH & Co. KG	10.00
B	Cosphaderm® T-70 NON GMO ECO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.30
C	Castor Oil	Ricinus Communis Seed Oil	Gustav Heess GmbH	10.00
C	Cosphaderm® Feel	Triheptanoin	Cosphatec GmbH	5.00
C	Unipure Red LC 381	CI 77491	SENSIENT BEAUTY	0.50
C	Colorona® Russet	MicaCI 77491CI 77891	Merck KGaA	0.50
C	Titanium Dioxide	CI 77891	-	2.00

MANUFACTURING PROCESS
Phase A: Mix all ingredients together and heat to 80-85 °C until everything is melted.
Phase B: Add all ingredients of phase B to phase A at 70°C.
Phase C: Premix the pigments in the oils until everything is homogeneous and add it to the hot phase A+B and fill into packaging.

SPECIFICATION
Appearance: Solid stick
Stability: stable for 3 months at room temperature and 40 °C
Microbiological stability: proven (Water activity value less than 0.75)

LIP SCRUB ALL NATURAL INGREDIENTS

100.102.1.1

VEGAN. SOFTENING. NOURISHING.

Oil protection: Cosphaderm® T-70 NON GMO ECO

PHASE	Ingredient	INCI	SUPPLIER	%
A	Castor Oil	Ricinus Communis Seed Oil	Gustav Heess GmbH	28.90
A	Hydrogenated Vegetable Oil	Hydrogenated Vegetable Oil	-	10.00
A	Lanette® O	Cetearyl Alcohol	BASF SE	2.50
A	Candellila Wax	Euphorbia Cerifera (Candelilla) Wax	Gustav Heess GmbH	3.00
A	Cosphaderm® GMCY	Glyceryl Caprylate	Cosphatec GmbH	0.30
A	MCT Oil Typ V Ph. Eur.	Caprylic/Capric Triglyceride	Gustav Heess GmbH	10.00
A	Cetiol® CC	Dicaprylyl Carbonate	BASF SE	7.50
A	Almond Oil	Prunus Amygdalus Dulcis Oil	Gustav Heess GmbH	5.00
A	Octyldodecanol	Octyldodecanol	-	12.10
A	Cosphaderm® T-70 NON GMO ECO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.20
A	Cosphaderm® E-1000 Sunflower	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.50
B	Sucrose	Sucrose	-	20.00
C	Cosmetic Colour		-	q.s.

MANUFACTURING PROCESS
Phase A: Prepare phase A and heat to 60-65 °C. Stir until complete dissolution.
Phase B: Let the mixture cool down and add phase B at room temperature.
Phase C: Add colour as desired.

SPECIFICATION
Appearance: Yellowish oil gel with sugar beads
Stability: stable for 3 months at room temperature and 40 °C
Microbiological stability: proven (Water activity value less than 0.75)

NATURAL MASCARA ALL NATURAL INGREDIENTS

700.129.1.1

VEGAN. LENGTH. SEPARATION OF THE LASHES.

Alternative preservation: Cosphaderm® Octiol natural, Cosphaderm® Hexiol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	55.10
A	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	5.00
A	Hydrolyzed Jojoba Esters	Hydrolyzed Jojoba EstersJojoba EstersAqua	-	2.00
A	Gummi Arabicum	Acacia Senegal Gum	-	0.50
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.50
A	Cosphaderm® PA-12	Sodium Phytate	Cosphatec GmbH	0.10
A	Sorbitol	Sorbitol	-	1.00
A	Cosphaderm® Octiol natural	Caprylyl Glycol	Cosphatec GmbH	0.30
A	Cosphaderm® Hexiol natural	1,2-Hexanediol	Cosphatec GmbH	1.50
B	Cosphaderm® GS Connect	Glyceryl Stearate Citrate	Cosphatec GmbH	2.00
B	Cutina® GMS V	Glyceryl Stearate	BASF SE	2.00
B	Lanette® O	Cetearyl Alcohol	BASF SE	4.00
B	Kahlwax 6607L	Helianthus Annuus Seed Cera	Kahl GmbH & Co. KG	7.00
B	Carnauba Wax	Copernicia Cerifera Cera	Gustav Heess GmbH	3.00
B	Shea Butter refined	Butyrospermum Parkii Butter	Gustav Heess GmbH	1.00
B	Cosphaderm® Feel	Triheptanoin	Cosphatec GmbH	5.00
C	Unipure Black LC 989	CI 77499	SENSIENT BEAUTY	10.00

Manufacturing Process
Phase A: Allow the Cosphaderm® Diols + Hydrolyzed Jojoba Esters to pre-dissolve. Then add to the water and add the thickeners while stirring. Mix until everything is homogeneous and heat to 85-90°C.
Phase B: Combine all ingredients of phase B separately and heat to 90°C.
Add phase B to phase A while stirring. Homogenise while cooling.
Phase C: Add phase C and mix/homogenise.
Adjust pH value to 6.80 ± 0.05.

Specification
Appearance: Black, high viscous emulsion
pH: 6.8 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

SOOTHING 2IN1 MAKE-UP REMOVER

300.11.1.1

SOOTHING. MAKE-UP REMOVING. CLEANSING.

Alternative preservation: Cosphaderm® Hexiol, Cosphaderm® Pentiol GL

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	70.35
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	5.00
A	Cosphaderm® PA ECONAT	Phytic AcidAqua	Cosphatec GmbH	0.10
A	Plantacare® 2000 UP	Decyl Glucoside	BASF SE	0.30
B	Cosphaderm® Hexiol	1,2-Hexanediol	Cosphatec GmbH	1.00
B	Cosphaderm® CHA	Caprylhydroxamic Acid	Cosphatec GmbH	0.15
B	Cosphaderm® Pentiol GL	Pentylene Glycol	Cosphatec GmbH	3.00
C	Cosphaderm® Feel	Triheptanoin	Cosphatec GmbH	20.00
C	Cosphaderm® T-70 NON GMO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.10
C	Oil-soluble Colour		-	q.s

Manufacturing Process
Phase A: Mix all ingredients of phase A under slow stirring.
Phase B: Mix all ingredients of phase B until everything is completely dissolved and add B to phase A.
Adjust the pH of phase A+B to 5.5 ± 0.05.
Phase C: Mix all ingredients of phase C and add the mixture to phase A+B without stirring.

Specification
Appearance: Two-phase system with coloured oil phase on top of transparent water phase
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven