Manufacturing Process Phase A: Combine water and Cosphagard® SA natural and raise the pH value to 10 – 11. Stir until complete dissolution. Afterwards lower the pH to approximately 6. Phase B: Combine all of the ingredients and stir with a stirring rod until the powder is moistened. Add phase A to phase B while stirring at medium speed to avoid air bubbles. If everything is dissolved heat the mixture has not

Manufacturing Process Phase A: Combine all ingredients of phase A. Raise the pH to 11 to dissolve Cosphagard® SA natural. Heat phase A to 70 °C. Phase B: Combine all ingredients and stir until Cosphaderm® X 34 is completely dissolved. Heat phase B to 70 °C. Add phase B to phase A under very soft stirring. Phase C: Add phase C below 40 °C to the finished formulation. Adjust the pH to 4.5 +_ 0.05. Thas not

Manufacturing Process Phase A: Combine all ingredients of phase A. Raise the pH to 11 to dissolve Cosphagard® SA natural. Heat phase A to 70 °C. Phase B: Combine all ingredients and stir until Cosphaderm® X 34 is completely dissolved. Heat phase B to 70 °C. Add phase B to phase A under very soft stirring. Phase C: Add phase C below 40 °C to the finished formulation. Adjust the pH to 4.5 +_ 0.05. Thas not

Manufacturing Process Phase A: Combine all ingredients of phase A. Raise the pH to 11 to dissolve Cosphagard® SA natural. Heat phase A to 70 °C. Phase B: Combine all ingredients and stir until Cosphaderm® X 34 is completely dissolved. Heat phase B to 70 °C. Add phase B to phase A under very soft stirring. Phase C: Add phase C below 40 °C to the finished formulation. Adjust the pH to 4.5 +_ 0.05. Thas not