We understand the requirements and issues of cosmetic formulators. That’s why we spend a lot of time with application technology in our in-house laboratory. Here we investigate the incorporation and effect of raw materials in order to offer our customers the best possible support and appropriate recommendations.
We have provided a selected set of formulations for you to download here – enjoy!
QUICKLY ABSORBING. RICH SKIN FEEL. HYDRATING.
Alternative preservation: Cosphaderm® LA-T, Cosphaderm® AS
| PHASE | Ingredient | Cosmos | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Glycerin |
Glycerin
|
CREMER OLEO GmbH & Co. KG
|
4.00 | |
| A | Cosphaderm® X soft |
Xanthan Gum
|
Cosphatec GmbH
|
1.00 | |
| A | Cosphaderm® Sodium Hyaluronate low |
Sodium Hyaluronate
|
Cosphatec GmbH
|
0.20 | |
| A | Demin. Water |
Aqua
|
-
|
59.70 | |
| A | Cosphaderm® AS |
p-Anisic Acid
|
Cosphatec GmbH
|
0.40 | |
| A | Cosphaderm® LA-T |
Levulinic AcidGlycerinSodium LevulinateAqua
|
Cosphatec GmbH
|
1.20 | |
| B | Demin. Water |
Aqua
|
-
|
22.50 | |
| B | Cosphaderm® SF-75H |
Hydrogenated Lecithin
|
Cosphatec GmbH
|
3.50 | |
| B | Sunflower Oil |
Helianthus Annuus Seed Oil
|
Gustav Heess GmbH
|
5.00 | |
| B | Jojoba Oil |
Simmondsia Chinensis Seed Oil
|
Gustav Heess GmbH
|
2.50 |
Manufacturing Process
Phase A: Prepare phase A. Raise the pH to 10 to dissolve Cosphaderm® AS and stir until everything is completely dissolved.
Afterwards, adjust the pH to 5.5 ± 0.05 by adding Citric Acid.
Phase B: Prepare phase B and homogenise for 5 minutes with high performance disperser (stator/rotor) at max. speed.
Add phase B to phase A in small steps under stirring.
Adjust pH value to 5.5 ± 0.05.
Specification
Appearance: Shiny emulsion
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)
CLEANSING. FOAMING. NATURALLY ACTIVE AGAINST DANDRUFF.
Alternative preservation: Cosphaderm® LA-T, Cosphaderm® AS
| PHASE | Ingredient | Cosmos | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water |
Aqua
|
-
|
77.45 | |
| A | Sodium Coco-Sulfate |
Sodium Coco Sulfate
|
-
|
10.00 | |
| A | Plantacare® 1200 UP |
Lauryl Glucoside
|
BASF SE
|
4.00 | |
| A | Dehyton® K |
Cocamidopropyl Betaine
|
BASF SE
|
2.00 | |
| A | SOFTISAN® conditionHAIR |
PCA Glyceryl Oleate
|
IOI Oleo GmbH
|
1.00 | |
| A | Cosphagard® SA natural |
Salicylic Acid
|
Cosphatec GmbH
|
3.00 | |
| A | Cosphaderm® AS |
p-Anisic Acid
|
Cosphatec GmbH
|
0.20 | |
| B | Cosphaderm® X 34 |
Xanthan Gum
|
Cosphatec GmbH
|
0.50 | |
| C | Cosphaderm® PA ECONAT |
Phytic AcidAqua
|
Cosphatec GmbH
|
0.10 | |
| C | Cosphaderm® LA-T |
Levulinic AcidGlycerinSodium LevulinateAqua
|
Cosphatec GmbH
|
1.00 | |
| D | Sodium Chloride |
Sodium Chloride
|
-
|
0.75 |
Manufacturing Process
Phase A: Combine all ingredients of phase A. Raise the pH to 11 to dissolve Cosphagard® SA natural.
Heat phase A to 70 °C.
Phase B: Combine all ingredients and stir until Cosphaderm® X 34 is completely dissolved.
Heat phase B to 70 °C.
Add phase B to phase A under very soft stirring.
Phase C: Add phase C below 40 °C to the finished formulation. Adjust the pH to 4.5 ± 0.05.
The shampoo will thicken within 24 hours.
Specification
Appearance: Clear to yellowish liquid
pH: 4.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)