Nous comprenons les exigences et les problèmes des formulateurs de produits cosmétiques. C'est pourquoi nous consacrons beaucoup de temps à la technique d'application dans notre laboratoire interne. Nous y étudions l'incorporation et l'effet des matières premières afin de pouvoir offrir à nos clients le meilleur soutien possible et des recommandations adaptées.
Nous avons sélectionné une série de formulations que vous pouvez télécharger ici. Bonne lecture !
CLEAN BEAUTY. MINIMALIST FORMULATION. HYDRATING.
Alternative preservation: Cosphaderm® Zinc Lactate natural, Cosphaderm® GMUD, Cosphaderm® Magnolia Extract 98
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 71.50 | |
| A | Cosphaderm® Zinc Lactate natural | Zinc Lactate | Cosphatec GmbH | 0.50 | |
| A | Cosphaderm® X 34 | Xanthan Gum | Cosphatec GmbH | 0.50 | |
| B | Cosphaderm® GS Connect | Glyceryl Stearate Citrate | Cosphatec GmbH | 3.50 | |
| B | Lanette® 16 | Cetyl Alcohol | BASF SE | 3.00 | |
| B | Cosphaderm® GMUD | Glyceryl Undecylenate | Cosphatec GmbH | 0.60 | |
| B | Shea Butter refined | Butyrospermum Parkii Butter | Gustav Heess GmbH | 8.00 | |
| B | Sunflower Oil | Helianthus Annuus Seed Oil | Gustav Heess GmbH | 12.00 | |
| B | Cosphaderm® T-70 NON GMO ECO | Tocopherol Helianthus Annuus Seed Oil | Cosphatec GmbH | 0.20 | |
| C | Cosphaderm® Magnolia Extract 98 | Magnolia Officinalis Bark Extract | Cosphatec GmbH | 0.20 |
Manufacturing Process
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Heat the water phase to 70-75 °C.
Phase B: Combine all ingredients of phase B and heat to 75°C. Phase C is added to the oil phase just before emulsion is formed.
Add phase B+C to the water phase while stirring. Homogenise at 40°C.
Adjust the pH to 5.5 ± 0.05.
Specification
Appearance: White, high viscous cream
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
SOOTHING. SKIN PROTECTING. GENTLE.
Alternative preservation: Cosphaderm® Sodium LAAS, Cosphaderm® Pentiol natural, Cosphaderm® GMUD
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 63.70 | |
| A | Panthenol | Panthenol Aqua | - | 1.00 | |
| A | Cosphaderm® Pentiol natural | Pentylene Glycol | Cosphatec GmbH | 3.00 | |
| A | Cosphaderm® Sodium LAAS | Sodium Levulinate Sodium Anisate | Cosphatec GmbH | 1.20 | |
| A | Magnesium Sulfate | Magnesium Sulfate | - | 0.70 | |
| B | Imwitor® 600 | Polyglyceryl-3 Polyricinoleate | IOI Oleo GmbH | 3.50 | |
| B | Beeswax white | Cera alba | - | 1.00 | |
| B | Shea Butter refined | Butyrospermum Parkii Butter | Gustav Heess GmbH | 6.00 | |
| B | MCT Oil Typ V Ph. Eur. | Caprylic/Capric Triglyceride | Gustav Heess GmbH | 6.00 | |
| B | Cosphaderm® GMUD | Glyceryl Undecylenate | Cosphatec GmbH | 0.60 | |
| B | Almond Oil | Prunus Amygdalus Dulcis Oil | Gustav Heess GmbH | 8.00 | |
| B | Cosphaderm® T-70 NON GMO ECO | Tocopherol Helianthus Annuus Seed Oil | Cosphatec GmbH | 0.30 | |
| B | Zinc Oxide | Zinc Oxide | - | 5.00 |
Manufacturing Process
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Adjust the pH to 5.5 ± 0.05.
Phase B: Combine all ingredients of phase B.
Heat phase B to 80 °C and slowly add phase A to B while homogenising.
Specification
Appearance: White low viscous lotion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
Bulletin d'information
Inscrivez-vous maintenant à notre newsletter électronique et recevez les dernières informations sur nos produits.
Veuillez remplir tous les champs *obligatoires
