Nous comprenons les exigences et les problèmes des formulateurs de produits cosmétiques. C'est pourquoi nous consacrons beaucoup de temps à la technique d'application dans notre laboratoire interne. Nous y étudions l'incorporation et l'effet des matières premières afin de pouvoir offrir à nos clients le meilleur soutien possible et des recommandations adaptées.
Nous avons sélectionné une série de formulations que vous pouvez télécharger ici. Bonne lecture !
RICH SKIN FEEL. QUICKLY ABSORBING. HYDRATING.
Alternative preservation: Cosphaderm® Dicapo
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 84.50 | |
| A | Glycerin | Glycerin | - | 3.00 | |
| A | Cosphaderm® PA ECONAT | Phytic Acid Aqua | Cosphatec GmbH | 0.10 | |
| B | Cosphaderm® X 34 | Xanthan Gum | Cosphatec GmbH | 0.20 | |
| B | Aristoflex® AVC | Ammonium Acryloyldimethyltaurate/ VP Copolymer | Clariant AG | 1.00 | |
| C | Cosphaderm® E NGM natural | Lysolecithin | Cosphatec GmbH | 1.50 | |
| C | Cegesoft® SH | Shorea Stenoptera Seed Butter | BASF SE | 2.50 | |
| C | Sunflower Oil | Helianthus Annuus Seed Oil | Gustav Heess GmbH | 2.00 | |
| C | Jojoba Oil | Simmondsia Chinensis Seed Oil | Gustav Heess GmbH | 2.00 | |
| C | Softisan® 154 | Hydrogenated Palm Oil | IOI Oleo GmbH | 1.00 | |
| C | Cosphaderm® AP | Ascorbyl Palmitate | Cosphatec GmbH | 0.20 | |
| C | Cosphaderm® T-70 NON GMO ECO | Tocopherol Helianthus Annuus Seed Oil | Cosphatec GmbH | 0.30 | |
| C | Cosphaderm® Feel | Triheptanoin | Cosphatec GmbH | 1.00 | |
| D | Cosphaderm® Dicapo | Caprylyl Glycol Glyceryl Caprylate Dipropylene Glycol | Cosphatec GmbH | 0.70 |
Manufacturing Process
Phase A: Mix all ingredients together.
Phase B: Slowly add Cosphaderm® X 34 and Aristoflex® AVC under stirring to phase A. Continue stirring until complete dissolution. Then heat to 80 °C.
Phase C: Mix all ingredients and heat to 80 °C. Add phase C to phase A+B and homogenise.
Phase D: Add Cosphaderm® Dicapo below 40 °C under stirring.
Adjust the pH to 5.5 ± 0.05.
Specification
Appearance: Light beige, shiny, viscous emulsion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
HIGH SPREADABILITY. LIGHT SKIN FEEL. SOFTENING.
Alternative preservation: Cosphaderm® Dicapo
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 81.80 | |
| A | Glycerin | Glycerin | - | 3.00 | |
| A | Cosphaderm® Sodium Hyaluronate | Sodium Hyaluronate | Cosphatec GmbH | 0.50 | |
| A | Carbopol® Ultrez-21 | Acrylates/C10-30 Alkyl Acrylate Crosspolymer | Lubrizol | 0.30 | |
| B | Imwitor® 375 | Glyceryl Citrate/ Lactate/ Lineolate/ Oleate | IOI Oleo GmbH | 0.50 | |
| B | Cosphaderm® Feel | Triheptanoin | Cosphatec GmbH | 13.00 | |
| B | Cosphaderm® Dicapo | Caprylyl Glycol Glyceryl Caprylate Dipropylene Glycol | Cosphatec GmbH | 0.70 | |
| B | Cosphaderm® T-70 NON GMO | Tocopherol Helianthus Annuus Seed Oil | Cosphatec GmbH | 0.20 |
Manufacturing Process
Phase A: Combine all ingredients of phase A and stir until everything is dissolved.
Phase B: Combine all ingredients of phase B.
Add phase B into phase A and homogenise until everything is dissolved.
Adjust the pH to 6.5 ± 0.05.
Specification
Appearance: White viscous lotion
pH: 6.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
Bulletin d'information
Inscrivez-vous maintenant à notre newsletter électronique et recevez les dernières informations sur nos produits.
Veuillez remplir tous les champs *obligatoires
