Nous comprenons les exigences et les problèmes des formulateurs de produits cosmétiques. C'est pourquoi nous consacrons beaucoup de temps à la technique d'application dans notre laboratoire interne. Nous y étudions l'incorporation et l'effet des matières premières afin de pouvoir offrir à nos clients le meilleur soutien possible et des recommandations adaptées.
Nous avons sélectionné une série de formulations que vous pouvez télécharger ici. Bonne lecture !
MILDLY CLEANSING. SENSITIVE. SULFATE-FREE.
Alternative preservation: Cosphaderm® Propanediol natural, Cosphaderm® LA-T
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | ||
| A | Cosphaderm® Propanediol natural | Propanediol | Cosphatec GmbH | 4.35 | |
| A | Glycerin | Glycerin | - | 5.00 | |
| A | Cosphaderm® LA-T | Levulinic Acid Glycerin Sodium Levulinate Aqua | Cosphatec GmbH | 1.00 | |
| A | Cosphaderm® CHA | Caprylhydroxamic Acid | Cosphatec GmbH | 0.15 | |
| B | Cosphaderm® X 34 | Xanthan Gum | Cosphatec GmbH | 0.50 | |
| C | Plantacare® 818 UP | Coco Glucoside | BASF SE | 10.00 | |
| C | Plantacare® 2000 UP | Decyl Glucoside | BASF SE | 4.00 |
Manufacturing Process
Phase A: Mix all ingredients except Cosphaderm® CHA. Add Cosphaderm® CHA and Stir phase A until complete dissolution.
Phase B: Slowly add Cosphaderm® X 34 to phase A while stirring.
Phase C: Mix phase C and add to phase A+B while carefully stirring to prevent foaming.
Adjust the pH to 5.5 ± 0.05.
Specification
Appearance: Transparent viscous gel
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
SOOTHING. MAKE-UP REMOVING. CLEANSING.
Alternative preservation: Cosphaderm® Hexiol, Cosphaderm® Pentiol GL
| PHASE | INGREDIENT | COSMOS | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water | Aqua | - | 70.35 | |
| A | Glycerin | Glycerin | - | 5.00 | |
| A | Cosphaderm® PA ECONAT | Phytic Acid Aqua | Cosphatec GmbH | 0.10 | |
| A | Plantacare® 2000 UP | Decyl Glucoside | BASF SE | 0.30 | |
| B | Cosphaderm® Hexiol | 1,2-Hexanediol | Cosphatec GmbH | 1.00 | |
| B | Cosphaderm® CHA | Caprylhydroxamic Acid | Cosphatec GmbH | 0.15 | |
| B | Cosphaderm® Pentiol GL | Pentylene Glycol | Cosphatec GmbH | 3.00 | |
| C | Cosphaderm® Feel | Triheptanoin | Cosphatec GmbH | 20.00 | |
| C | Cosphaderm® T-70 NON GMO | Tocopherol Helianthus Annuus Seed Oil | Cosphatec GmbH | 0.10 | |
| C | Oil-soluble Colour | - |
Manufacturing Process
Phase A: Mix all ingredients of phase A under slow stirring.
Phase B: Mix all ingredients of phase B until everything is completely dissolved and add B to phase A.
Adjust the pH of phase A+B to 5.5 ± 0.05.
Phase C: Mix all ingredients of phase C and add the mixture to phase A+B without stirring.
Specification
Appearance: Two-phase system with coloured oil phase on top of transparent water phase
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
Bulletin d'information
Inscrivez-vous maintenant à notre newsletter électronique et recevez les dernières informations sur nos produits.
Veuillez remplir tous les champs *obligatoires
