FORMULATIONS

DES COSMÉTIQUES MODERNES POUR DES FORMULATEURS AMBITIEUX

Nous comprenons les exigences et les problèmes des formulateurs de produits cosmétiques. C’est pourquoi nous consacrons beaucoup de temps à développer des technologies d’application dans notre laboratoire interne. Nous y étudions l’incorporation et les effets des matières premières afin d’offrir à nos clients le meilleur soutien possible et des recommandations appropriées.

Nous avons sélectionné une série de formulations que vous pouvez télécharger ici. Bonne lecture !

SOINS DU VISAGE

MOISTURISING MAGNOLIA CREAM GEL ALL NATURAL INGREDIENTS

100.13.1.2

ACTIVE AGAINST ACNE. NOURISHING. LIGHT AND SOFT TEXTURE.

Alternative preservation: Cosphaderm® Pentiol natural, Cosphaderm® Propanediol natural, Cosphaderm® Magnolia Extract 98

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	77.80
A	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	4.00
A	Cosphaderm® Pentiol natural	Pentylene Glycol	Cosphatec GmbH	5.00
A	Sodium PCA	Sodium PCA	-	0.50
B	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	3.00
B	Cosphaderm® KG	Amorphophallus Konjac Root Extract	Cosphatec GmbH	0.80
C	Cosphaderm® SF-75H	Hydrogenated Lecithin	Cosphatec GmbH	1.00
D	Imwitor® 375	Glyceryl CitrateLactateLineolateOleate	IOI Oleo GmbH	0.50
D	Shea Butter refined	Butyrospermum Parkii Butter	Gustav Heess GmbH	1.00
D	Babassu Oil	Orbignya Oleifera Seed Oil	Gustav Heess GmbH	2.00
D	Macadamia Nut Oil	Macadamia Ternifolia Seed Oil	Gustav Heess GmbH	2.00
D	Cosphaderm® Feel	Triheptanoin	Cosphatec GmbH	2.00
D	Cosphaderm® Magnolia Extract 98	Magnolia Officinalis Bark Extract	Cosphatec GmbH	0.20
D	Cosphaderm® T-70 NON GMO ECO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.20

Manufacturing Process
Phase A: Combine all ingredients of phase A.
Phase B: Disperse Cosphaderm® KG in glycerol and add it to phase A. Stir until completely dissolved.
Phase C: Add phase C and stir until everything is homogeneous.
Phase D: Prepare phase D and melt at 50 °C, then cool down to room temperature.
Add phase D to the water phase and homogenise.
Adjust pH to 5.5 ± 0.05.

Specification
Appearance: Shiny, viscous emulsion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

ELASTIC JELLY MASK ALL NATURAL INGREDIENTS

100.20.1.1

MOISTURISING. SOOTHING. CALMING.

Alternative preservation: Cosphaderm® Pentiol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	82.30
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	4.00
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.60
A	Cosphaderm® KG	Amorphophallus Konjak Root Extract	Cosphatec GmbH	0.60
A	Cosphaderm® Pentiol natural	Pentylene Glycol	Cosphatec GmbH	5.00
B	Cosphaderm® SF-75H	Hydrogenated Lecithin	Cosphatec GmbH	2.50
B	Jojoba Oil	Simmondsia Chinensis Seed Oil	Gustav Heess GmbH	5.00

Manufacturing Process
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Add all ingredients and to phase A and homogenise.
Adjust the pH to 5.5 ± 0.05.
Heat the mixture to its boiling point and keep this temperature for 2 – 3 minutes (Warning: Lecithins are heat sensitive. Therefore, the process of heating should be kept to a minimum!).
Quickly pour the hot mixture into a casting mould and let it cool.

Specification
Appearance: White to off-white, elastic jelly patch
pH: 5.5 ± 0.05
Stability: Stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

HYDRO JELLY MASK

100.21.3.1

HYDRATING. RELAXING. CALMING.

Alternative preservation: Cosphaderm® Hexiol, Cosphaderm® Pentiol GL, Cosphaderm® Propanediol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	82.80
A	Cosphaderm® Hexiol	1,2-Hexanediol	Cosphatec GmbH	1.00
A	Cosphaderm® Pentiol GL	Pentylene Glycol	Cosphatec GmbH	5.00
B	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	5.00
B	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	5.00
B	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.50
B	Cosphaderm® KG	Amorphophallus Konjac Root Extract	Cosphatec GmbH	0.50
B	Cosphaderm® Sodium Hyaluronate low	Sodium Hyaluronate	Cosphatec GmbH	0.20

Manufacturing Process
Phase A: Prepare phase A.
Phase B: Pre-disperse phase B and add to the water phase while stirring. Stir until everything is completely dissolved.
Adjust the pH to 5.5 – 6.0 ± 0.05.
Heat the mixture to its boiling point and keep this temperature for 2 – 3 minutes.
Quickly pour the hot mixture into a casting mould and let it cool.

Specification
Appearance: Transparent or coloured, elastic jelly patch
pH: 5.5 – 6.0 ± 0.05
Stability: Stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

JELLY EYE PATCHES

100.88.1.1

HYDRATING. REFRESHING. ANTI-AGEING.

Alternative preservation: Cosphaderm® Heptiol natural, Cosphaderm® Pentiol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	87.60
A	Cosphaderm® Pentiol natural	Pentylene Glycol	Cosphatec GmbH	4.00
A	Cosphaderm® Heptiol natural	1,2-Heptanediol	Cosphatec GmbH	1.00
B	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	3.00
B	Cosphaderm® Sodium Hyaluronate high	Sodium Hyaluronate	Cosphatec GmbH	0.20
B	Cosphaderm® Sodium Hyaluronate low	Sodium Hyaluronate	Cosphatec GmbH	0.20
B	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.50
B	Cosphaderm® KG	Amorphophallus Konjac Root Extract	Cosphatec GmbH	0.50
B	RonaCare® Nicotinamide	Niacinamide	Merck KGaA	3.00

MANUFACTURING PROCESS
Phase A: Prepare phase A.
Phase B: Pre-disperse phase B and add to the water phase while stirring. Stir until everything is completely dissolved.
Adjust the pH to 5.5 – 6.0 ± 0.05.
Heat the mixture to 80-90°C and keep this temperature for 2 – 3 minutes.
Quickly pour the hot mixture into moulds and let it cool down.

SPECIFICATION
Appearance: Transparent or coloured, elastic jelly patch
pH: 5.5 – 6.0 ± 0.05
Stability: Stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

SOINS CAPILLAIRES

POWDER TO FOAM SHAMPOO ALL NATURAL INGREDIENTS

400.89.1.1

WATERLESS. INSTANT WATER-ACTIVATED FORMULATION FOR IMMEDIATE USE. CLEAN BEAUTY.

Alternative preservation: Cosphaderm® Zinc Lactate

PHASE	Ingredient	INCI	SUPPLIER	%
A	Sodium Cocoyl Isethionate	Sodium Cocoyl Isethionate	Berg + Schmidt GmbH & Co. KG	53.00
A	Sorbitol	Sorbitol	-	10.00
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	3.00
A	Cosphaderm® KG	Amorphophallus Konjac Root Extract	Cosphatec GmbH	1.00
A	Cosphaderm® Zinc Lactate natural	Zinc Lactate	Cosphatec GmbH	2.00
A	Citric Acid	Citric Acid	-	0.80
A	Hydrolyzed Wheat Protein	Hydrolyzed Wheat Protein	-	1.50
A	Magnesium Stearate	Magnesium Stearate	-	10.00
A	Cosphaderm® SF-75H	Hydrogenated Lecithin	Cosphatec GmbH	1.00
A	CORN PO4 PH « B“	Distarch Phosphate	Agrana	10.00
A	Sensocel® bc 20	Cellulose	CFF GmbH & Co. KG	5.00
B	Sunflower Oil	Helianthus Annuus Seed Oil	Gustav Heess GmbH	2.50
B	Cosphaderm® T-70 NON GMO ECO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.20

MANUFACTURING PROCESS
Phase A: Mix all ingredients together and stir until homogeneous.
Phase B: Combine all ingredients and add phase B to A while stirring.

SPECIFICATION
Appearance: White powder
Stability: stable for 3 months at room temperature and 40 °C
Microbiological stability: proven (Water activity value less than 0.75)

NETTOYANTS

JELLY SOAP

300.22.1.2

CLEANSING. FOAMING. BOUNCY TEXTURE.

Alternative preservation: Cosphaderm® Hexiol, Cosphaderm® Octiol, Cosphaderm® Propanediol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	5.00
A	Cosphaderm® Hexiol	1,2-Hexanediol	Cosphatec GmbH	2.00
A	Cosphaderm® Octiol	Caprylyl Glycol	Cosphatec GmbH	0.50
A	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	1.00
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.50
A	Cosphaderm® KG	Amorphophallus Konjac Root Extract	Cosphatec GmbH	0.50
B	Demin. Water	Aqua	-	83.50
C	Plantacare® 810 UP	Caprylyl/Capryl Glucoside	BASF SE	2.00
C	Texapon® NSO UP	Sodium Laureth Sulfate	BASF SE	5.00

Manufacturing Process
Phase A: Prepare phase A and stir until dispersed.
Phase B: Slowly add the water to phase A under stirring and stir until complete dissolution.
If wanted, add heat-proof colour.
Phase C: Prepare phase C, adjust the pH to 5.5 ± 0.05 and set aside.
Heat phase A+B to its boiling point and keep this temperature for 2 – 3 min.
Add phase C to the hot phase A+B. Continue stirring until everything is combined.
Quickly pour the warm mixture into moulds and let it cool down.

Specification
Appearance: Clear, solid, elastic jelly
pH: 5.5 – 6.5
Stability: stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

NATURAL JELLY SOAP ALL NATURAL INGREDIENTS

300.96.1.1

BOUNCY TEXTURE. CLEANSING. FOAMING.

Alternative preservation: Cosphaderm® Pentiol natural, Cosphaderm® Sodium LAAS

PHASE	Ingredient	INCI	SUPPLIER	%
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	5.00
A	Cosphaderm® Pentiol natural	Pentylene Glycol	Cosphatec GmbH	3.00
A	Cosphaderm® KG	Amorphophallus Konjac Root Extract	Cosphatec GmbH	0.50
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.50
B	Demin. Water	Aqua	-	69.50
B	Perlastan® SC	Sodium/Disodium Cocoyl Glutamate	Schill + Seilacher Struktol GmbH	8.00
B	Plantacare® 818 UP	Coco Glucoside	BASF SE	12.00
B	SOFTISAN® conditionHAIR	PCA Glyceryl Oleate	IOI Oleo GmbH	0.50
C	Cosphaderm® Sodium LAAS	Sodium LevulinateSodium Anisate	Cosphatec GmbH	1.00

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until dispersed.
Phase B: Prepare phase B and lower the pH to ~ 5.5.
Add phase C and phase A to phase B.
Adjust the pH to 5.5 ± 0.05.

Heat the prepared solution to 80 – 90 °C and stir at this temperature for 2 – 3 min.
Quickly pour the warm mixture into moulds and let it cool down.

SPECIFICATION
Appearance: Clear, solid, elastic jelly
pH: 5.5 ± 0.05
Stability: stable for 3 months at room temperature and 40 °C
Microbiological stability: proven