Manufacturing Process Phase A: Combine all ingredients of phase A and stir until everything is homogeneous. Phase B: Simply add lukewarm tap water to the bottle, then add in your powder shampoo. Shake for approximately 30 seconds and wait until everything has been dissolved. Let the mixture rest for 24 h. Specification Appearance: Pearlescent, viscous gel pH: 5.5 +_ 0.10 Stability: No separation afterhas not

MANUFACTURING PROCESS Phase A: Mix all ingredients together and stir until homogeneous. Phase B: Combine all ingredients and add phase B to A while stirring. SPECIFICATION Appearance: White powder Stability: stable for 3 months at room temperature and 40 °C Microbiological stability: proven (Water activity value less than 0.75)has not

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Phase B: Add phase B to A carefully to avoid foaming. Adjust the pH to 5.5 +_ 0.05. Phase C: Add phase C to the final formulation while stirring. SPECIFICATION Appearance: Transparent gel with small peeling beads pH: 5.5 +_ 0.05 Stability: No separation after centrifugation (4000 rpm,has not

Manufacturing Process Phase A: Allow the Cosphaderm® Diols + Hydrolyzed Jojoba Esters to pre-dissolve. Then add to the water and add the thickeners while stirring. Mix until everything is homogeneous and heat to 85-90°C. Phase B: Combine all ingredients of phase B separately and heat to 90°C. Add phase B to phase A while stirring. Homogenise while cooling. Phase C: Add phase C and mix/homogenise. Adjuhas not