Manufacturing Process Phase A: Combine all ingredients of phase A and raise the pH to 11 to dissolve the cinnamic acid completely. Afterwards, adjust the pH to 5.5 +_ 0.05 by adding Citric Acid. Phase B: Prepare phase B and heat phase A and phase B separately to 75 °C. Add phase B to phase A under thorough stirring with the propeller stirrer and homogenise the mixture. Phase C: Add Cosphaderm® Magnolia has not

Manufacturing Process Phase A: Combine all ingredients of phase A and stir until everything is dissolved. Phase B: Combine all ingredients and heat phase B to 40 – 50 °C. Afterwards combine phase A and B while stirring slowly until a homogeneous gel is formed. Phase C: Add panthenol to the mixture (<40 °C). Adjust pH to 5.5 +_ 0.05. Specification Appearance: Yellowish, slightly turbid, viscoushas not

Manufacturing Process Phase A: Combine all ingredients and dissolve Phase A at 40°C. Phase B: Add phase B to phase A and adjust the pH to 5.0 - 5.5. Phase C: Add phase C to phase A/B under soft stirring. Phase D: Dissolve Cosphaderm® Magnolia Extract 98 in Cosphaderm® Propanediol natural and Cosphaderm® TOM. Add phase D to phase A/B/C under stirring. Adjust the pH to 5.0 +_ 0.05. Specification Aphas not

Manufacturing Process If Planatacare® 1200 UP is cloudy or inhomogeneous, heat it until it is homogeneous. Phase A: Combine all ingredients of phase A and stir slowly until everything is completely dissolved. Phase B: Combine all ingredients of phase B. Add phase B to phase A under stirring with the propeller stirrer. Adjust the pH to 5.5 +_ 0.05. Specification Appearance: Milky, white gel pH: 5.5has not

Manufacturing Process Phase A: Combine all ingredients of phase A and raise the pH to 11 under stirring to dissolve cinnamic acid. Afterwards, adjust the pH to 5.5 +_ 0.05 by adding Citric Acid. Phase B: Add phase B to phase A and stir until everything is completely dissolved. Heat phase A+B to 60 °C and add phase C under strong stirring. Phase D: Add phase D to phase A+B below 40 °C. Adjust the pH to has not

Manufacturing Process Phase A: Combine all ingredients of phase A. Phase B: Add phase B to phase A while stirring and stir until everything is completely dissolved. Phase C: Prepare phase C and add to phase A+B under slow stirring to prevent foaming. Adjust pH to 5.5 +_ 0.05. Specification Appearance: Transparent gel pH: 5.5 +_ 0.05 Stability: Microbiological stability proven, no separation after chas not

Manufacturing Process Phase A: Combine all ingredients of phase A and stir until everything is dissolved. Phase B: Add phase B to phase A under stirring. Phase C: Combine all ingredients of phase C separately. Add then phase C to phase A and B under stirring. Adjust pH to 5.5 +_ 0.05. Specification Appearance: Transparent solution pH: 5.5 +_ 0.05 Stability: Microbiological stability proven, no sepahas not

Manufacturing Process Phase A: Mix all ingredients except Cosphaderm® CHA. Add Cosphaderm® CHA while stirring, then heat mixture to 70 °C. Stir phase A until complete dissolution. Phase B: Slowly add Cosphaderm® X 34 to phase A while stirring. Phase C: Mix phase C and add to phase A+B while carefully stirring to prevent foaming. Adjust the pH to 5.5 +_ 0.05. Specification Appearance: Transparent has not