PURIFYING CLEANSING LOTION

Manufacturing Process Phase A: Combine all ingredients of phase A and stir until everything is dissolved. Heat to 65 °C. Phase B: Prepare all ingredients of phase B and heat to 65 °C. Add phase B to phase A under stirring. Homogenise. Adjust the pH to 5.5 +_ 0.05 if necessary. Specification Appearance: White viscous gel cream pH: 5.5 +_ 0.05 Stability: No separation after centrifugation (4000 rpm,has not

NATURAL CONDITIONER

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Phase B: Combine all ingredients of phase B. Heat both phases separately to 70-75 °C and add phase B to A while homogenising. Phase C: Dissolve Cosphaderm® Magnolia Extract 98 in Cosphaderm® Diols. Add phase C to phase A/B under stirring. Adjust the pH to 4.0 +_ 0.05. SPECIFICATION has not

ACTIVATING CLEANSING FOAM

Manufacturing Process Phase A: Combine all ingredients of phase A and stir until everything is dissolved. Phase B: Add phase B to phase A under stirring. Phase C: Combine all ingredients of phase C separately. Add then phase C to phase A and B under stirring. Adjust pH to 5.5 +_ 0.05. Specification Appearance: Transparent liquid solution pH: 5.5 +_ 0.05 Stability: No separation after centrifugationhas not

SOFT CREAM SOAP

Manufacturing Process Phase A: Combine all ingredients and stir until everything is completely dissolved. Phase B: Combine phase B separately and add phase B to phase A under soft stirring. Stir until both phases are mixed. Phace C: Add phenylpropanol to phase A+B. Adjust th pH to 5.5 +_ 0.05. Specification Appearance: Transparent, viscous liquid pH: 5.5 +_ 0.05 Stability: No separation after centrifhas not
Register now for the Newsletter!

STIMULATING SKIN PERFECTING SCRUB

Manufacturing Process Phase A: Combine all ingredients of phase A. Raise the pH to 11 to dissolve Cosphagard® SA natural. When everything is dissolved, lower the pH back to 5-6 again. Phase B: Add Cosphaderm® X 34 to phase A and stir until everything is completely dissolved. Phase C: Combine all ingredients of phase C separately. Add then phase C to phase A+B. Phase D: Add phase D to the finished formulhas not

SOOTHING 2IN1 MAKE-UP REMOVER

Manufacturing Process Phase A: Mix all ingredients of phase A under slow stirring. Phase B: Mix all ingredients of phase B until everything is completely dissolved and add B to phase A. Adjust the pH of phase A+B to 5.5 +_ 0.05. Phase C: Mix all ingredients of phase C and add the mixture to phase A+B without stirring. Specification Appearance: Two-phase system with coloured oil phase on top of transpahas not
×
ABONNEZ-VOUS À NOS ACTUALITÉS
Restez toujours au courant ! Nous vous enverrons à intervalles irréguliers des nouvelles et mises à jour sur notre entreprise, des informations sur le marché et les dernières innovations.
[borlabs-cookie id="brevo" type="content-blocker"] [/borlabs-cookie]