Manufacturing Process Phase A: Combine all ingredients of phase A. Raise the pH to 11 to dissolve Cosphagard® SA natural completely. Phase B: Add phase B and lower the pH to 4.0 +_ 0.05. Specification Appearance: Clear solution pH: 4.0 +_ 0.05 Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)has not

Manufacturing Process Phase A: Mix all ingredients together. Phase B: Slowly add Cosphaderm® X 34 and Aristoflex® AVC under stirring to phase A. Continue stirring until complete dissolution. Then heat to 80 °C. Phase C: Mix all ingredients and heat to 80 °C. Add phase C to phase A+B and homogenise. Phase D: Add Cosphaderm® Dicapo below 40 °C under stirring. Adjust the pH to 5.5 +_ 0.05. Specifichas not

Manufacturing Process Phase A: Combine all ingredients of phase A and stir until complete dissolution. Adjust the pH value to 5.5 +_ 0.05. Phase B: Prepare phase B in a separate beaker. Add phase B to phase A without stirring and pour mixture into spray flask. Specification Appearance: Two-phase system with oil phase on top of translucent water phase pH: 5.5 +_ 0.05 Stability: Microbiological stabilhas not

Manufacturing Process Phase A: Combine all ingredients of phase A. Heat phase A to 40 °C.Raise the pH to 11 to dissolve Cosphagard® SA natural. Phase B: Add phase B to A and stir until Cosphaderm® X 34 is completely dissolved. Phase C: Add phase C under stirring. Phase D: Add phase D to thicken the formulation. Adjust the pH to 4.5 +_ 0.05. Specification Appearance: translucent to yellowish liqhas not

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A. Heat phase A to 40 °C.Raise the pH to 11 to dissolve Cosphagard® SA natural and Cosphaderm® pAS natural. Phase B: Add phase B to A and stir until Cosphaderm® X 34 is completely dissolved. Phase C: Add phase C under stirring. Phase D: Add phase D to thicken the formulation. Adjust the pH to 4.5 ± 0.05. SPECIFICATION Appearance: trhas not

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A. Heat phase A to 40 °C.Raise the pH to 11 to dissolve Cosphagard® SA natural and Cosphaderm® AS. Phase B: Add phase B to A and stir until Cosphaderm® X 34 is completely dissolved. Phase C: Add phase C under stirring. Phase D: Add phase D to thicken the formulation. Adjust the pH to 4.5 ± 0.05. SPECIFICATION Appearance: translucenthas not

Manufacturing Process If Planatacare® 1200 UP is cloudy or inhomogeneous, heat it until it is homogeneous. Phase A: Combine all ingredients of phase A and stir slowly until everything is completely dissolved. Phase B: Combine all ingredients of phase B. Add phase B to phase A under stirring with the propeller stirrer. Adjust the pH to 5.5 +_ 0.05. Specification Appearance: Milky, white gel pH: 5.5has not

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Phase B: Combine all ingredients of phase B. Heat both phases separately to 70-75 °C and add phase B to A while homogenising. Phase C: Dissolve Cosphaderm® Magnolia Extract 98 in Cosphaderm® Capo. Add phase C to phase A/B under stirring. Adjust the pH to 4.0 +_ 0.05. SPECIFICATION Ahas not