FRESH MAGNOLIA TOOTHPASTE

Manufacturing Process Phase A: Combine ingredients and stir until Cosphaderm® Magnolia Extract 98 is dissolved. Phase B: Prepare phase B and add to phase A under stirring. Heat the mixture to 50 °C. Phase C: Slowly add phase C into A+B and stir until complete dissolution. Phase D: Prepare phase D and add it to phase A+B+C under stirring. Phase E: Add phase E to the mixture and stir for 10 minutes at 10has not

REFRESHING MOUTHWASH

MANUFACTURING PROCESS Phase A: Combine all ingredients and stir until everything is completely dissolved. Phase B: Dissolve the menthol in Cosphaderm® Propanediol natural add phase B to phase A under soft stirring. Phase C: Add all ingredients of phase C and stir until everything is completely dissolved. Phase D: Add colour if wanted. Adjust the pH to 7.0 +_ 0.05. SPECIFICATION Appearance: Transparehas not

AFTER SHAVE FLUID

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Heat to 70-75 °C. Phase B: Combine all ingredients and heat to 75 °C. Add then phase B to phase A under strong stirring and homogenise. Phase C: Dissolve the menthol in Cosphaderm® Hexiol natural and add below 40°C. Adjust the pH to 5.5 +_ 0.05. SPECIFICATION Appearance: White emulshas not

FRESH & COOL AFTERSHAVE

Manufacturing Process Phase A: Combine all ingredients of phase A and stir until completely dissolved. Phase B: Prepare phase B and separately heat phase A and phase B to 80 °C. Add phase B to phase A while stirring. Phase C+D: Add phase C and D below 40 °C. Adjust pH to 5.5 +_ 0.05. Specification Appearance: Slightly yellowish cream pH: 5.5 +_ 0.05 Stability: Microbiological stability proven, nohas not
Register now for the Newsletter!

REVITALISING DAY CREAM FOR MEN

MANUFACTURING PROCESS Phase A: Prepare phase A. Raise the pH to 10 to dissolve Cosphaderm® pAS natural and stir until everything is completely dissolved. Afterwards, adjust the pH to 5.5 ± 0.05 by adding Citric Acid. Phase B: Add all ingredients of phase B to phase A. Then heat phase A+B to 75 °C. Phase C: Combine all ingredients and heat to 75 °C. Add then phase C to phase A+B under strong stirring anhas not
×
ABONNEZ-VOUS À NOS ACTUALITÉS
Restez toujours au courant ! Nous vous enverrons à intervalles irréguliers des nouvelles et mises à jour sur notre entreprise, des informations sur le marché et les dernières innovations.
[borlabs-cookie id="brevo" type="content-blocker"] [/borlabs-cookie]