Manufacturing Process Phase A: Combine all ingredients of phase A. Heat phase A to 40 °C.Raise the pH to 11 to dissolve Cosphagard® SA natural. Phase B: Add phase B to A and stir until Cosphaderm® X 34 is completely dissolved. Phase C: Add phase C under stirring. Phase D: Add phase D to thicken the formulation. Adjust the pH to 4.5 +_ 0.05. Specification Appearance: translucent to yellowish liqhas not

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A. Heat phase A to 40 °C.Raise the pH to 11 to dissolve Cosphagard® SA natural and Cosphaderm® pAS natural. Phase B: Add phase B to A and stir until Cosphaderm® X 34 is completely dissolved. Phase C: Add phase C under stirring. Phase D: Add phase D to thicken the formulation. Adjust the pH to 4.5 ± 0.05. SPECIFICATION Appearance: trhas not

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A. Heat phase A to 40 °C.Raise the pH to 11 to dissolve Cosphagard® SA natural and Cosphaderm® AS. Phase B: Add phase B to A and stir until Cosphaderm® X 34 is completely dissolved. Phase C: Add phase C under stirring. Phase D: Add phase D to thicken the formulation. Adjust the pH to 4.5 ± 0.05. SPECIFICATION Appearance: translucenthas not

Manufacturing Process Phase A: Combine all ingredients of phase A and stir until everything is dissolved. Phase B: Combine all ingredients and heat phase B to 40 – 50 °C. Afterwards combine phase A and B while stirring slowly until a homogeneous gel is formed. Phase C: Add panthenol to the mixture (<40 °C). Adjust pH to 5.5 +_ 0.05. Specification Appearance: Yellowish, slightly turbid, viscoushas not

Manufacturing Process Phase A: Combine all ingredients and dissolve Phase A at 40°C. Phase B: Add phase B to phase A and adjust the pH to 5.0 - 5.5. Phase C: Add phase C to phase A/B under soft stirring. Phase D: Dissolve Cosphaderm® Magnolia Extract 98 in Cosphaderm® Propanediol natural and Cosphaderm® TOM. Add phase D to phase A/B/C under stirring. Adjust the pH to 5.0 +_ 0.05. Specification Aphas not

Manufacturing Process If Planatacare® 1200 UP is cloudy or inhomogeneous, heat it until it is homogeneous. Phase A: Combine all ingredients of phase A and stir slowly until everything is completely dissolved. Phase B: Combine all ingredients of phase B. Add phase B to phase A under stirring with the propeller stirrer. Adjust the pH to 5.5 +_ 0.05. Specification Appearance: Milky, white gel pH: 5.5has not

Manufacturing Process Phase A: Combine all ingredients and stir until Cosphaderm® X 34 is completely dissolved. Phase B: Combine phase B and add phase B to phase A under slow stirring. Phase C: Add phase C to phase A+B to thicken the formulation. Adjust the pH to 5.5 +_ 0.05. Specification Appearance: Milky, white gel pH: 5.5 +_ 0.05. Stability: Microbiological stability proven, no separation afterhas not

Manufacturing Process Phase A: Combine all ingredients of phase A. Raise the pH to 11 to dissolve Cosphagard® SA natural. When everything is dissolved, lower the pH back to 5-6 again. Phase B: Add Cosphaderm® X 34 to phase A and stir until everything is completely dissolved. Phase C: Combine all ingredients of phase C separately. Add then phase C to phase A+B. Phase D: Add the last phase to the finishedhas not