MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Heat to 70-75°C. Phase B: Combine all ingredients of phase B and heat to 70-75°C. Add phase B to phase A while stirring. Phase C: Add phase C under 40 °C and homogenise. Adjust the pH to 5.5 +_ 0.05. SPECIFICATION Appearance: White high viscous cream pH: 5.5 +_ 0.05 Stability: No has not

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Phase B: Combine all ingredients of phase B. Heat both phases separately to 75-80 °C.  Add phase B to A while stirring and then homogenise. Adjust the pH to 5.5 +_ 0.05. SPECIFICATION Appearance: White, viscous gel cream pH: 5.5 +_ 0.05 Stability: No separation after centrifugation has not

Manufacturing Process Phase A: Combine all ingredients of phase A and raise the pH to 11 to dissolve the cinnamic acid completely. Afterwards, adjust the pH to 5.5 +_ 0.05 by adding Citric Acid. Phase B: Add phase B to phase A while stirring. Stir until everything is completely dissolved. Phase C: Prepare phase C and heat both phases separately to 75 °C. Add phase C to phase A/B under stirring and homogehas not

Manufacturing Process Phase A: Mix phase A and stir until everything is completely dissolved. Phase B: Add phase B to phase A and stir until dispersed. Phase C: Slowly add phase C to phase A+B and stir until complete dissolution. Phase D: Mix all ingredients of phase D and heat phase A+B+C and D separately to 80 °C. Add phase D slowly to phase A+B+C while stirring. Phase E: Dissolve Cosphaderm® Panthehas not

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Phase B: Combine all ingredients of phase B. Heat both phases separately to 75 °C and add phase B to A while stirring. Stir cold and homogenise at 40°C. Adjust the pH to 5.5 +_ 0.05. SPECIFICATION Appearance:  White high viscous emulsion pH: 5.5 +_ 0.05 Stability: No separation afthas not

Manufacturing Process Phase A: Mix all ingredients together. Slowly add Cosphaderm® X 34 while stirring. Then heat to 80 °C. Phase B: Combine all ingredients and heat to 80 °C. Add phase B to phase A and homogenise. Phase C: Add Cosphaderm® MultiMEG below 40 °C while stirring. Adjust the pH to 5.5 +_ 0.05. Specification Appearance: White, shiny emulsion pH: 5.5 +_ 0.05 Stability: No separatiohas not

Manufacturing Process Phase A: Combine all ingredients of phase A. Slowly add Cosphaderm® X 34 to phase A and stir until completely dissolved. Phase B: Combine all ingredients of phase B. Heat both phases separately to 80-85 °C. Add phase B to phase A under strong stirring and homogenise the formulation. Adjust pH to 5.5 +_ 0.05. Specification Appearance: Shiny, off-white high viscous cream pH: has not

Manufacturing Process Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Phase B: Combine all ingredients of phase B. Heat both phases separately to 75 °C and add phase B to A while stirring very fast. Homogenise. Adjust the pH to 5.0 +_ 0.05. Specification Appearance: White viscous lotion pH: 5.0 +_ 0.05 Stability: No separation after centrifugation (400has not