Manufacturing Process Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Phase B: Combine all ingredients of phase B separately and add to phase A under stirring. Adjust pH to 5.5 +_ 0.05 if necessary. Specification Appearance: Transparent, low viscous serum pH: 5.5 +_ 0.05 Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 monthhas not

Manufacturing Process Phase A: Disperse the thickeners in glycerol and Cosphaderm® Propanediol natural. Phase B: Add demin. water and stir until everything is dissolved. Phase C: Add phase C to A/B. Adjust the pH to 5.5 +_ 0.05. Specification Appearance: Translucent, viscous gel pH: 5.5 +_ 0.05 Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperaturehas not

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Phase B: Combine all ingredients of phase B. Heat both phases separately to 70-75 °C and add phase B to A while stirring. Then homogenise the formulation. Phase C: Dissolve Cosphaderm® Magnolia Extract 98 in Cosphaderm® Dicapo natural. Add phase C and phase D to phase A+B after cooling has not

Manufacturing Process Phase A: Mix all ingredients together. Phase B: Slowly add Cosphaderm® X 34 and Aristoflex® AVC under stirring to phase A. Continue stirring until complete dissolution. Then heat to 80 °C. Phase C: Mix all ingredients and heat to 80 °C. Add phase C to phase A+B and homogenise. Phase D: Add Cosphaderm® Dicapo below 40 °C under stirring. Adjust the pH to 5.5 +_ 0.05. Specifichas not

Manufacturing Process Phase A: Mix phase A and stir until everything is completely dissolved. Phase B: Add phase B to phase A and stir until dispersed. Phase C: Slowly add phase C to phase A+B and stir until complete dissolution. Phase D: Mix all ingredients of phase D and heat phase A+B+C and D separately to 80 °C. Add phase D slowly to phase A+B+C while stirring. Phase E: Dissolve Cosphaderm® Panthehas not

Manufacturing Process Combine all ingredients of phase A, heating to 80°C. When everything has melted, add phase B. Take off heat and pour into molds. Specification Appearance: Solid, yellowish bar Stability: stable for 3 months at room temperature and 40 °C Microbiological stability: proven (Water activity value less than 0.75)has not

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Phase B: Add Cosphaderm® SF-75H to phase A and let it soak for 10-20 minutes. Then heat phase A+B to 70 °C. Phase C: Combine all ingredients of phase C and heat to 70 °C. Add then phase C to phase A+B under strong stirring and homogenise the formulation. Adjust the pH to 5.0 +_ 0.05. has not

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Phase B: Add phase B to A while stirring. Then heat phase A+B to 75 °C. Phase C: Combine all ingredients of phase C and heat to 75 °C. Then add phase C to phase A+B under strong stirring and homogenise the formulation. Adjust the pH to 4.5 +_ 0.05. SPECIFICATION Appearance: White, hihas not