MANUFACTURING PROCESS Phase A: Combine the ingredients of phase A. Raise the pH to 11 to dissolve Cosphagard® SA natural. When everything is dissolved, lower the pH back to 4-5 again. Phase B: Add all ingredients from phase B one after another. Adjust the pH to 4.0 +_ 0.05. SPECIFICATION Appearance: Transparent, low viscous solution pH: 4.0 +_ 0.05 Stability: No separation after centrifugation (4000has not

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Phase B: Slowly add phase B to A while stirring. Phase C: Mix all ingredients of phase C and add to phase A+B while stirring. Adjust the pH to 5.0 +_ 0.05. SPECIFICATION Appearance: Transparent, low viscous serum pH: 5.0 +_ 0.05 Stability: No separation after centrifugation (4000 rpm,has not

Manufacturing Process Phase A: Combine all ingredients of phase A. Heat phase A to 40 °C.Raise the pH to 11 to dissolve Cosphagard® SA natural. Phase B: Add phase B to A and stir until Cosphaderm® X 34 is completely dissolved. Phase C: Add phase C under stirring. Phase D: Add phase D to thicken the formulation. Adjust the pH to 4.5 +_ 0.05. Specification Appearance: translucent, yellowish gel has not

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A. Heat phase A to 40 °C.Raise the pH to 11 to dissolve Cosphagard® SA natural and Cosphaderm® pAS natural. Phase B: Add phase B to A and stir until Cosphaderm® X 34 is completely dissolved. Phase C: Add phase C under stirring. Phase D: Add phase D to thicken the formulation. Adjust the pH to 4.5 +_ 0.05. Specification Appearance: trhas not

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A. Heat phase A to 40 °C.Raise the pH to 11 to dissolve Cosphagard® SA natural and Cosphaderm® AS. Phase B: Add phase B to A and stir until Cosphaderm® X 34 is completely dissolved. Phase C: Add phase C under stirring. Phase D: Add phase D to thicken the formulation. Adjust the pH to 4.5 +_ 0.05. Specification Appearance: translucenthas not

Manufacturing Process Phase A: Combine all ingredients of phase A and stir until everything is dissolved. Phase B: Prepare all ingredients of phase B. Afterwards combine phase A and B while stirring slowly until a homogeneous gel is formed. Adjust pH to 5.5 +_ 0.05. Specification Appearance: Yellowish, slightly turbid, viscous gel pH: 5.5 +_ 0.05 Stability: No separation after centrifugation (4000 rhas not

Manufacturing Process Phase A: Combine all ingredients and dissolve Phase A at 40°C. Phase B: Add phase B to phase A and adjust the pH to 5.0 - 5.5. Phase C: Add phase C to phase A/B under soft stirring. Phase D: Dissolve Cosphaderm® Magnolia Extract 98 in Cosphaderm® Propanediol natural and Cosphaderm® TOM. Add phase D to phase A/B/C under stirring. Adjust the pH to 5.0 +_ 0.05. Specification Aphas not

Manufacturing Process Phase A: Combine all ingredients of phase A and stir until everything is dissolved. Phase B: Slowly add phase B to phase A under stirring. Stir until complete dissolution. Adjust pH to 5.5 +_ 0.05 and heat phase A and B to 70 °C. Phase C: Combine all ingredients and heat phase C to 70 °C. Add then phase C to phase A and B under strong stirring and homogenise the formulation. Adjushas not