FORMULIERUNGEN

MODERNE KOSMETIK FÜR ANSPRUCHSVOLLE ENTWICKLER

Wir verstehen die Anforderungen und Fragestellungen von Kosmetik-Entwicklern. Darum verbringen wir viel Zeit mit Anwendungstechnik in unserem In-House Labor. Hier untersuchen wir die Einarbeitung und Wirkung von Rohstoffen, um unseren Kunden den bestmöglichen Support und passende Empfehlungen bieten zu können.

Ein ausgewähltes Set an Formulierungen haben wir hier zum Download bereitgestellt – viel Spaß damit!

FaceCare

MOISTURISING DAYCREAM

100.1.1.1

RICH SKIN FEEL. QUICKLY ABSORBING. FREE OF LISTED PRESERVATIVES.

Alternative preservation: Cosphaderm® Dicapo

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
ad 100
A Glycerin
Glycerin
Cremer GmbH
3.00
A Cosphaderm® PA ECONAT
Phytic AcidAqua
Cosphatec GmbH
0.10
B Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.20
B Aristoflex® AVC
Ammonium Acryloyldimethyltaurate/ VP Copolymer
Clariant AG
1.00
C Cosphaderm® E NGM
Lysolecithin
Cosphatec GmbH
1.50
Cegesoft® SH
Shorea Stenoptera Seed Butter
BASF SE
2.50
C Sunflower Oil
Helianthus Annuus Seed Oil
Gustav Heess GmbH
2.00
C Jojoba Oil
Simmondsia Chinensis Seed Oil
Gustav Heess GmbH
2.00
C Softisan® 154
Hydrogenated Palm Oil
IOI Oleo GmbH
1.00
C Cosphaderm® AP
Ascorbyl Palmitate
Cosphatec GmbH
0.20
C Cosphaderm® T-70 NON GMO ECO
TocopherolHelianthus Annuus Seed Oil
Cosphatec GmbH
0.30
C Cosphaderm® Feel
Triheptanoin
Cosphatec GmbH
1.00
D Cosphaderm® Dicapo
Caprylyl GlycolGlyceryl CaprylateDipropylene Glycol
Cosphatec GmbH
0.70

Manufacturing Process
Phase A: Mix all ingredients together.
Phase B: Slowly add Cosphaderm® X 34 and Aristoflex® AVC under vigorous stirring to phase A.
Continue stirring for approx. 15 min at 500 rpm until complete dissolution. Then heat to 80 °C.
Phase C: Mix all ingredients and heat to 80 °C. Add phase C to phase A+B and
homogenise via vigorous stirring for approx. 10 min.
Phase D: Add Cosphaderm® Dicapo below 40 °C under vigorous stirring.
Adjust pH if necessary.

Specification
Appearance: Shiny, viscous emulsion
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

Cleansing

CONDITIONING SHAMPOO ALL NATURAL INGREDIENTS

400.3.1.1

CONDITIONING. SLES-FREE. FREE OF LISTED PRESERVATIVES.

Alternative preservation: Cosphaderm® TOM, Cosphaderm® Propanediol natural, Cosphaderm® Magnolia Extract 98

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
ad 100
A Cosphaderm® Propanediol natural
Propanediol
Cosphatec GmbH
3.00
A Glycerin
Glycerin
Cremer GmbH
3.00
A Cosphaderm® TOM
Pentylene GlycolGlyceryl CaprylateGlyceryl Undecylenate
Cosphatec GmbH
1.80
A Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
1.00
B Sulfopon® 1216 G
Sodium Coco Sulfate
BASF SE
6.50
B Plantacare® 1200 UP
Lauryl Glucoside
BASF SE
7.36
B Dehyton® K
Cocamidopropyl Betaine
BASF SE
4.88
B Plantacare® 818 UP
Coco Glucoside
BASF SE
2.50
B Cosphaderm® E NGM
Lysolecithin
Cosphatec GmbH
1.00
B Cosphaderm® Magnolia Extract 98
Magnolia Officinalis Bark Extract
Cosphatec GmbH
0.05

Manufacturing Process
Phase A: Mix all ingredients of phase A and stir until everything is dissolved.
Phase B: Mix phase B and heat phase A and B separately to 50 °C.
Add phase A to phase B under soft stirring. Try to avoid air bubbles.
Adjust the pH to 5.0 ± 0.05.

Specification
Appearance: Yellowish gel
pH: 5.0 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

Special Care

BABY BATH ALL NATURAL INGREDIENTS

500.31.3.1

GENTLY FOAMING. MILDLY CLEANSING. FREE OF LISTED PRESERVATIVES.

Alternative Preservation: Cosphaderm® Pentiol natural, Cosphaderm® GeMix, Cosphaderm® CA natural

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
ad 100
A Cosphaderm® Pentiol natural
Pentylene Glycol
Cosphatec GmbH
2.00
A Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
1.00
B Cosphaderm® E NGM
Lysolecithin
Cosphatec GmbH
5.00
C Plantacare® 818 UP
Coco Glucoside
BASF SE
10.00
C Plantacare® 2000 UP
Decyl Glucoside
BASF SE
25.00
C Cosphaderm® GeMix
Glyceryl CaprylateGlyceryl Undecylenate
Cosphatec GmbH
1.00
D Cosphaderm® CA natural
Cinnamic Acid
Cosphatec GmbH
0.30

Manufacturing Process
Phase A+B: Combine phase A in a beaker and stir until Cosphaderm® X 34 is dissolved.
Heat phase A to 60 °C and add phase B under strong stirring.
Phase C: Add phase C to phase A+B below 40 °C.
Phase D: Before adding phase D to the mixture increase the pH to 11 and add
Cosphaderm® CA natural.
Afterwards lower the pH to 5.5 ± 0.05.

Specification
Appearance: Transparent, yellow gel
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)