FORMULIERUNGEN

MODERNE KOSMETIK FÜR ANSPRUCHSVOLLE ENTWICKLER

Wir verstehen die Anforderungen und Fragestellungen von Kosmetik-Entwicklern. Darum verbringen wir viel Zeit mit Anwendungstechnik in unserem In-House Labor. Hier untersuchen wir die Einarbeitung und Wirkung von Rohstoffen, um unseren Kunden den bestmöglichen Support und passende Empfehlungen bieten zu können.

Ein ausgewähltes Set an Formulierungen haben wir hier zum Download bereitgestellt – viel Spaß damit!

FaceCare

MOISTURISING DAYCREAM

100.1.1.1

RICH SKIN FEEL. QUICKLY ABSORBING. FREE OF LISTED PRESERVATIVES.

Alternative preservation: Cosphaderm® Dicapo

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
ad 100
A Glycerin
Glycerin
Cremer GmbH
3.00
A Cosphaderm® PA ECONAT
Phytic AcidAqua
Cosphatec GmbH
0.10
B Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.20
B Aristoflex® AVC
Ammonium Acryloyldimethyltaurate/ VP Copolymer
Clariant AG
1.00
C Cosphaderm® E NGM
Lysolecithin
Cosphatec GmbH
1.50
Cegesoft® SH
Shorea Stenoptera Seed Butter
BASF SE
2.50
C Sunflower Oil
Helianthus Annuus Seed Oil
Gustav Heess GmbH
2.00
C Jojoba Oil
Simmondsia Chinensis Seed Oil
Gustav Heess GmbH
2.00
C Softisan® 154
Hydrogenated Palm Oil
IOI Oleo GmbH
1.00
C Cosphaderm® AP
Ascorbyl Palmitate
Cosphatec GmbH
0.20
C Cosphaderm® T-70 NON GMO ECO
TocopherolHelianthus Annuus Seed Oil
Cosphatec GmbH
0.30
C Cosphaderm® Feel
Triheptanoin
Cosphatec GmbH
1.00
D Cosphaderm® Dicapo
Caprylyl GlycolGlyceryl CaprylateDipropylene Glycol
Cosphatec GmbH
0.70

Manufacturing Process
Phase A: Mix all ingredients together.
Phase B: Slowly add Cosphaderm® X 34 and Aristoflex® AVC under vigorous stirring to phase A.
Continue stirring for approx. 15 min at 500 rpm until complete dissolution. Then heat to 80 °C.
Phase C: Mix all ingredients and heat to 80 °C. Add phase C to phase A+B and
homogenise via vigorous stirring for approx. 10 min.
Phase D: Add Cosphaderm® Dicapo below 40 °C under vigorous stirring.
Adjust pH if necessary.

Specification
Appearance: Shiny, viscous emulsion
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

Bodycare

RICH & SOFT HANDCREAM ALL NATURAL INGREDIENTS

200.4.1.2

REGENERATING. SOFT SKIN FEEL. FREE OF LISTED PRESERVATIVES.

Alternative preservation: Cosphaderm® MultiMEG

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
ad 100
A Glycerin
Glycerin
Cremer GmbH
2.00
B Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.25
C Lamecreme
Glyceryl StearateGlyceryl Stearate Citrate
-
2.50
C Montanov™ 68
Cetearyl AlcoholCetearyl Glycoside
SEPPIC, S.A.
2.00
C Tegomuls
Hydrogenated Palm Glyceride
-
0.50
C Ecorol® 18/98 P
Cetyl Alcohol
Ecogreen Oleochemicals
1.00
C Beeswax
Cera alba
Gustav Heess GmbH
0.50
C Carnauba Wax
Cera Carnauba
Gustav Heess GmbH
1.00
C Shea Butter refined
Butyrospermum Parkii Butter
Gustav Heess GmbH
3.00
C Sunflower Oil
Helianthus Annuus Seed Oil
Gustav Heess GmbH
3.00
C Peach Kernel Oil
Prunus Persica Kernel Oil
Gustav Heess GmbH
1.50
C Jojoba Oil
Simmondsia Chinensis Seed Oil
Gustav Heess GmbH
2.50
C Cosphaderm® T-70 NON GMO
TocopherolHelianthus Annuus Seed Oil
Cosphatec GmbH
0.30
C Cosphaderm® AP
Ascorbyl Palmitate
Cosphatec GmbH
0.20
C Cosphaderm® Feel
Triheptanoin
Cosphatec GmbH
2.00
D Cosphaderm® MultiMEG
Glyceryl CaprylatePentylene GlycolMagnolia Officinalis Bark Extract
Cosphatec GmbH
1.20

Manufacturing Process
Phase A: Mix all ingredients together.
Phase B: Slowly add Cosphaderm® X 34 to phase A under strong stirring. Continue stirring for approx.
15 min at 500 rpm until complete dissolution. Then heat to 80 °C.
Phase C: Mix all ingredients together and heat to 80 °C.
Phase C: Add phase C to phase A+B and homogenise for approx. 1 min using Ultra-Turrax. Cool down
under medium stirring.
Phase D: Add Cosphaderm® MultiMEG below 40 °C under vigorous stirring.
Adjust pH if necessary.

Specification
Appearance: White, shiny, viscous emulsion
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)