FORMULIERUNGEN

Manufacturing Process
Phase A: Combine all ingredients of phase A and raise the pH to 11 to dissolve cinnamic acid. When everything is dissolved, lower the pH back to 6 again.
Phase B: Add all ingredients of phase B to phase A and stir until a slightly viscous gel is formed.
Adjust pH to 5.5 ± 0.05.

Specification
Appearance: Yellowish, transparent, slightly viscous gel
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

Manufacturing Process
Combine all ingredients of phase A and stir until everything is completely dissolved. Then add phase B to phase A under stirring.
Adjust the pH to 6.0 ± 0.05 to thicken the formulation.

Specification
Appearance: Transparent, clear, viscous gel
pH: 6.0 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

Manufacturing Process
Phase A: Prepare phase A.
Phase B: Pre-disperse phase B and add to the water phase while stirring. Stir until everything is completely dissolved.
Adjust the pH to 5.5 – 6.0 ± 0.05.
Heat the mixture to its boiling point and keep this temperature for 2 – 3 minutes.
Quickly pour the hot mixture into a casting mould and let it cool.

Specification
Appearance: Transparent or coloured, elastic jelly patch
pH: 5.5 – 6.0 ± 0.05
Stability: Stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

Manufacturing Process
Phase A: Combine all ingredients of phase A.
Phase B: Add phase B to phase A while stirring and stir until everything is completely dissolved.
Phase C: Prepare phase C and add to phase A+B under slow stirring to prevent foaming.
Adjust pH to 5.5 ± 0.05.

Specification
Appearance: Transparent, viscous gel
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

Manufacturing Process
Phase A: Combine all ingredients of phase A.
Phase B: Add phase B to phase A while stirring and stir until everything is completely dissolved.
Phase C: Prepare phase C and add to phase A+B under slow stirring to prevent foaming.
Adjust pH to 5.5 ± 0.05.

Specification
Appearance: Transparent, viscous gel
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven

Manufacturing Process
Phase A: Mix all ingredients of phase A under slow stirring.
Phase B: Mix all ingredients of phase B until everything is completely dissolved and add B to phase A.
Adjust the pH of phase A+B to 5.5 ± 0.05.
Phase C: Mix all ingredients of phase C and add the mixture to phase A+B without stirring.

Specification
Appearance: Two-phase system with coloured oil phase on top of translucent water phase
pH: 5.5 ± 0.05
Stability: Microbiological stability proven