FORMULIERUNGEN

MODERNE KOSMETIK FÜR ANSPRUCHSVOLLE ENTWICKLER

Wir verstehen die Anforderungen und Fragestellungen von Kosmetik-Entwicklern. Darum verbringen wir viel Zeit mit Anwendungstechnik in unserem In-House Labor. Hier untersuchen wir die Einarbeitung und Wirkung von Rohstoffen, um unseren Kunden den bestmöglichen Support und passende Empfehlungen bieten zu können.

Ein ausgewähltes Set an Formulierungen haben wir hier zum Download bereitgestellt – viel Spaß damit!

FaceCare

RICH MOISTURISER ALL NATURAL INGREDIENTS

100.42.2.1

NOURISHING. HYDRATING. FREE OF LISTED PRESERVATIVES.

Alternative preservation: Cosphaderm® CA natural, Cosphaderm® GeMix

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
-
ad 100
A Cosphaderm® Sodium Hyaluronate low
Sodium Hyaluronate
Cosphatec GmbH
0.10
A Glycerin
Glycerin
Cremer GmbH
5.00
A Cosphaderm® PA ECONAT
Phytic AcidAqua
Cosphatec GmbH
0.10
A Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.50
A Cosphaderm® CA natural
Cinnamic Acid
Cosphatec GmbH
0.20
B Cosphaderm® SF-75H
Hydrogenated Lecithin
Cosphatec GmbH
2.00
C Almond Oil
Prunus Amygdalus Dulcis Oil
Gustav Heess GmbH
3.00
C Argan Oil
Argania Spinosa Kernel Oil
Gustav Heess GmbH
3.00
C Jojoba Oil
Simmondsia Chinensis Seed Oil
Gustav Heess GmbH
3.00
C Imwitor® 372P
Glyceryl Stearate Citrate
IOI Oleo GmbH
2.00
D Cosphaderm® GeMix
Glyceryl CaprylateGlyceryl Undecylenate
Cosphatec GmbH
1.20

Manufacturing Process
Phase A: Combine all ingredients of phase A under stirring. Stir until Cosphaderm® X 34 is completely
dissolved. Raise the pH to 11 to dissolve Cosphaderm® CA natural.
Phase B: Add Cosphaderm® SF-75H to phase A under stirring and let it soak for 10 minutes. Then heat
phase A+B to 80 °C.
Phase C: Combine all ingredients of phase C and heat to 80 °C. Add then phase C to phase A+B under
strong stirring and homogenise the formulation.
Phase D: Add Cosphaderm® GeMix below 40 °C.
Adjust the pH to 5.5 ± 0.05.

Specification
Appearance: White cream
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

BLACK PEELING MASK ALL NATURAL INGREDIENTS

100.26.2.2

PURIFYING. DETOXIFYING. FREE OF LISTED PRESERVATIVES.

Alternative preservation: Cosphaderm® LA-T, Cosphaderm® CA natural, Cosphaderm® Magnolia Extract 98

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
ad 100
A Kaolin
Kaolin
-
10.00
A Glycerin
Glycerin
Cremer GmbH
8.00
A Plantacare® 818 UP
Coco Glucoside
BASF SE
3.00
A Charcoal Powder
Charcoal Powder
-
2.85
A Cosphaderm® CA natural
Cinnamic Acid
Cosphatec GmbH
0.30
A Cosphaderm® LA-T
Levulinic AcidGlycerinSodium LevulinateAqua
Cosphatec GmbH
1.20
A Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.40
B Mango Butter
Mangifera Indica Seed Butter
-
6.00
B PolyAquol®-2W
Polyclyceryl-2-StearateGlyceryl StearateStearyl Alcohol
Innovacos
2.50
B Beeswax
Cera alba
Gustav Heess GmbH
2.50
B Ecorol® 16/98 P
Cetyl Alcohol
Ecogreen Oleochemicals
2.00
B Cosphaderm® Feel
Triheptanoin
Cosphatec GmbH
1.00
B Cosphaderm® T-70 NON GMO ECO
TocopherolHelianthus Annuus Seed Oil
Cosphatec GmbH
0.10
C Cosphaderm® Magnolia Extract 98
Magnolia Officinalis Bark Extract
Cosphatec GmbH
0.20
D Kaolin
Kaolin
-
5.00
D Lipo® AMS
Prunus Amygdalus Dulcis Seed Meal
Vantage Speciality Ingredients, Inc.
1.00

Manufacturing Process
Phase A: Combine all ingredients of phase A except Cosphaderm® CA natural and
Cosphaderm® LA-T and stir for 10 min at 1500 rpm. Add Cosphaderm® CA natural and raise the pH to 11
to dissolve it completely.
Then add Cosphaderm® LA-T to lower the pH again.
Phase B: Prepare phase B and heat phase A and phase B separately to 75 °C.
Add phase B to phase A under thorough stirring with the propeller stirrer and homogenise the mixture.
Phase C: Add Cosphaderm® Magnolia Extract 98 to phase A+B under stirring and below 40 °C.
Phase D: Prepare phase D and add it to the formulation. Let the mask cool down under moderate
stirring.
Adjust the pH to 5.5 ± 0.05.

Specification
Appearance: Black, creamy paste with small exfoliants
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

AFTER-SUN GEL

100.54.2.1

COOLING. STRESS-RELIEVING. FREE OF LISTED PRESERVATIVES.

Alternative preservation: Cosphaderm® LA-T, Cosphaderm® CA natural, Cosphaderm® Pentiol GL

PHASE Ingredient Cosmos INCI SUPPLIER %
A Cosphaderm® X soft
Xanthan Gum
Cosphatec GmbH
0.50
A Glycerin
Glycerin
Cremer GmbH
5.00
A Cosphaderm® Sodium Hyaluronate
Sodium Hyaluronate
Cosphatec GmbH
0.20
A D-Panthenol 75 %
PanthenolAqua
-
1.00
A Cosphaderm® Pentiol GL
Pentylene Glycol
Cosphatec GmbH
3.00
B Demin. Water
Aqua
-
ad 100
B Cosphaderm® CA natural
Cinnamic Acid
Cosphatec GmbH
0.20
B Witch Hazel Water
Hamamelis virginiana water
-
10.00
Ronacare® Allantoin
Allantoin
Merck KGaA
0.20
B Aloe Vera Powder
Aloe Barbadensis Leaf Juice Powder
-
0.50
B Cosphaderm® LA-T
Levulinic AcidGlycerinSodium LevulinateAqua
Cosphatec GmbH
1.00

Manufacturing Process
Phase A: Combine all ingredients of phase A and mix with a stirring rod, then set aside.
Phase B: Add Cosphaderm® CA natural, witch hazel water, allantoin and aloe vera powder to the water
and increase the pH value to 9 – 10. Stir until the powder has dissolved completely. Afterwards, add
Cosphaderm® LA-T to the mixture.
Add phase B to phase A and stir until a slightly viscous gel is formed.
Adjust pH to 5.5 ± 0.05.

Specification
Appearance: Yellowish, clear, slightly viscous gel
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

Cleansing

DETANGLE SHAMPOO ALL NATURAL INGREDIENTS

400.46.1.1

CONDITIONING. DETANGLING. FREE OF LISTED PRESERVATIVES.

Alternative preservation: Cosphaderm® GeMix, Cosphaderm® CA natural

PHASE Ingredient Cosmos INCI SUPPLIER %
A Cosphaderm® GeMix
Glyceryl CaprylateGlyceryl Undecylenate
Cosphatec GmbH
1.00
A SOFTISAN® conditionHAIR
PCA Glyceryl Oleate
IOI Oleo GmbH
0.50
A Perlastan® SC
Sodium/Disodium Cocoyl Glutamate
Schill + Seilacher Struktol GmbH
10.00
A Plantacare® 818 UP
Coco Glucoside
BASF SE
10.00
A Plantacare® 1200 UP
Lauryl Glucoside
BASF SE
2.00
A Witarix® 60/40
Caprylic/Capric Triglyceride
IOI Oleo GmbH
0.30
A Cosphaderm® CA natural
Cinnamic Acid
Cosphatec GmbH
0.20
B Glycerin
Glycerin
Cremer GmbH
3.00
B Cosphaderm® X soft
Xanthan Gum
Cosphatec GmbH
1.00
B Demin. Water
Aqua
-
71.90
B Cosphaderm® PA ECONAT
Phytic AcidAqua
Cosphatec GmbH
0.10

Manufacturing Process
Phase A: Combine all ingredients of phase A and stir slowly until Cosphaderm® CA natural is completely
dissolved.
Phase B: Combine all ingredients of phase B and stir until Cosphaderm® X soft is dissolved.
Heat both phases separately to 50 °C and add phase B to phase A under thorough stirring with
the propeller stirrer. Adjust the pH to 5.5 ± 0.05.

Specification
Appearance: Milky, white gel
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

Special Care

BABY BATH ALL NATURAL INGREDIENTS

500.31.3.1

GENTLY FOAMING. MILDLY CLEANSING. FREE OF LISTED PRESERVATIVES.

Alternative Preservation: Cosphaderm® Pentiol natural, Cosphaderm® GeMix, Cosphaderm® CA natural

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
ad 100
A Cosphaderm® Pentiol natural
Pentylene Glycol
Cosphatec GmbH
2.00
A Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
1.00
B Cosphaderm® E NGM
Lysolecithin
Cosphatec GmbH
5.00
C Plantacare® 818 UP
Coco Glucoside
BASF SE
10.00
C Plantacare® 2000 UP
Decyl Glucoside
BASF SE
25.00
C Cosphaderm® GeMix
Glyceryl CaprylateGlyceryl Undecylenate
Cosphatec GmbH
1.00
D Cosphaderm® CA natural
Cinnamic Acid
Cosphatec GmbH
0.30

Manufacturing Process
Phase A+B: Combine phase A in a beaker and stir until Cosphaderm® X 34 is dissolved.
Heat phase A to 60 °C and add phase B under strong stirring.
Phase C: Add phase C to phase A+B below 40 °C.
Phase D: Before adding phase D to the mixture increase the pH to 11 and add
Cosphaderm® CA natural.
Afterwards lower the pH to 5.5 ± 0.05.

Specification
Appearance: Transparent, yellow gel
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

CALMING BABY CREAM ALL NATURAL INGREDIENTS

NATURALLY MILD. SOOTHING. FREE OF LISTED PRESERVATIVES.

Alternative preservation: Cosphaderm® LA-T, Cosphaderm® CA natural, Cosphaderm® GMCY

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
ad 100
A Glycerin
Glycerin
Cremer GmbH
3.00
A Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.30
A Cosphaderm® CA natural
Cinnamic Acid
Cosphatec GmbH
0.20
A Cosphaderm® Sodium Hyaluronate high
Sodium Hyaluronate
Cosphatec GmbH
0.20
A Sodium Hydroxide Solution (10 %)
AquaSodium Hydroxide
-
q.s.
B Cosphaderm® SF-75H
Hydrogenated Lecithin
Cosphatec GmbH
2.00
B Shea Butter refined
Butyrospermum Parkii Butter
Gustav Heess GmbH
3.00
B Argan Oil
Argania Spinosa Kernel Oil
Gustav Heess GmbH
2.00
B PolyAquol®-2W
Polyclyceryl-2-StearateGlyceryl StearateStearyl Alcohol
Innovacos
2.50
B Ecorol® 16/98 P
Cetyl Alcohol
Ecogreen Oleochemicals
1.00
B Beeswax
Cera alba
Gustav Heess GmbH
2.50
B Cosphaderm® Feel
Triheptanoin
Cosphatec GmbH
1.00
B Cosphaderm® T-70 NON GMO ECO
TocopherolHelianthus Annuus Seed Oil
Cosphatec GmbH
0.10
B Cosphaderm® GMCY
Glyceryl Caprylate
Cosphatec GmbH
0.50
C Cosphaderm® LA-T
Levulinic AcidGlycerinSodium LevulinateAqua
Cosphatec GmbH
1.00
C Citric Acid Solution (10 %)
AquaCitric Acid
-
q.s

Manufacturing Process
Phase A: Combine all ingredients of phase A and raise the pH to 11 under stirring to dissolve
Cosphaderm® CA natural. Then heat phase A to 80 °C.
Phase B: Combine all ingredients and heat to 80 °C. Add then phase B to phase A under strong
stirring.
Add phase C to the finished formulation. Adjust the pH to 5.5 ± 0.05.

Specification
Appearance: White cream
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)