FORMULIERUNGEN

MODERNE KOSMETIK FÜR ANSPRUCHSVOLLE ENTWICKLER

Wir verstehen die Anforderungen und Fragestellungen von Kosmetik-Entwicklern. Darum verbringen wir viel Zeit mit Anwendungstechnik in unserem In-House Labor. Hier untersuchen wir die Einarbeitung und Wirkung von Rohstoffen, um unseren Kunden den bestmöglichen Support und passende Empfehlungen bieten zu können.

Ein ausgewähltes Set an Formulierungen haben wir hier zum Download bereitgestellt – viel Spaß damit!

HairCare

NATURAL CONDITIONER ALL NATURAL INGREDIENTS

400.72.1.1

LIGHT TEXTURE. SOFTENING. ANTI-FRIZZ.

Alternative preservation: Cosphaderm® Capo, Cosphaderm® Magnolia Extract 98

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	87.45
A	Hydrolyzed Oat Protein	Hydrolyzed Oat Protein	-	0.50
A	Cosphaderm® PA ECONAT	Phytic AcidAqua	Cosphatec GmbH	0.15
B	Lanette®N	Cetearyl AlcoholSodium Cetearyl Sulfate	BASF SE	5.00
B	Lanette® O	Cetearyl Alcohol	BASF SE	2.00
B	Witarix® MCT 60/40	Caprylic/Capric Triglyceride	CREMER OLEO GmbH & Co. KG	2.00
B	Cosphaderm® SF-D organic	Lecithin	Cosphatec GmbH	1.50
B	Cosphaderm® T-70 NON GMO ECO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.20
C	Cosphaderm® Capo	Caprylyl GlycolPropanediol	Cosphatec GmbH	1.00
C	Cosphaderm® Magnolia Extract 98	Magnolia Officinalis Bark Extract	Cosphatec GmbH	0.20

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Combine all ingredients of phase B.
Heat both phases separately to 70-75 °C and add phase B to A while homogenising.
Phase C: Dissolve Cosphaderm® Magnolia Extract 98 in Cosphaderm® Capo. Add phase C to phase A/B under stirring.
Adjust the pH to 4.0 ± 0.05.

SPECIFICATION
Appearance: beige emulsion
pH: 4.0 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

POWDER SHAMPOO ALL NATURAL INGREDIENTS

300.67.2.1

SUSTAINABLE. POWDER TO GEL. EASY TO REFILL.

Alternative preservation: Cosphaderm® Sodium LAAS, Cosphaderm® Zinc Lactate natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Sodium Lauryl Sulfoacetate	Sodium Lauryl Sulfoacetate	-	8.00
A	BergaSoft SCI 80	Sodium Cocoyl Isethionate	Berg + Schmidt GmbH & Co. KG	5.00
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.10
A	Cosphaderm® Sodium LAAS	Sodium LevulinateSodium Anisate	Cosphatec GmbH	1.00
A	Citric Acid	Citric Acid	-	0.10
A	Cosphaderm® SF-75H	Hydrogenated Lecithin	Cosphatec GmbH	0.50
A	Sorbitol	Sorbitol	-	2.00
A	Sodium Chloride	Sodium Chloride	-	0.45
A	Cosphaderm® Zinc Lactate natural	Zinc Lactate	Cosphatec GmbH	0.50
B	Water	Aqua	-	82.35

Manufacturing Process
Phase A: Combine all ingredients of phase A and stir until everything is homogeneous.
Phase B: Simply add lukewarm tap water to the bottle, then add in your powder shampoo. Shake for approximately 30 seconds and wait until everything has been dissolved. Let the mixture rest for 24 h.

Specification
Appearance: Pearlescent gel
pH: 5.5 ± 0.10
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

SHAMPOO BAR ALL NATURAL INGREDIENTS

300.65.1.1

WATERFREE. CLEANSING. ALL NATURAL.

Alternative preservation: Cosphaderm® Dicapo natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	BergaSoft SCI 80	Sodium Cocoyl Isethionate	Berg + Schmidt GmbH & Co. KG	47.00
A	Lanette® 16	Cetyl Alcohol	BASF SE	15.80
A	Kahlwax 6607L	Helianthus Annuus Seed CeraAscorbyl PalmitateTocopherolHelianthus Annuus Seed Oil	Kahl GmbH & Co. KG	2.50
A	Cosphaderm® Feel	Triheptanoin	Cosphatec GmbH	5.00
A	Coconut Oil	Coco Nucifera Oil	Gustav Heess GmbH	15.00
A	Jojoba Oil	Simmondsia Chinensis Seed Oil	Gustav Heess GmbH	10.00
B	Cosphaderm® Tapmix	LecithinHelianthus Annuus Seed OilTocopherolAscorbyl Palmitate	Cosphatec GmbH	1.00
B	Cosphaderm® Dicapo natural	Caprylyl GlycolPropanediolGlyceryl Caprylate	Cosphatec GmbH	0.70
B	Corn Starch	Zea Mays Starch	-	3.00

Manufacturing Process
Combine all ingredients of phase A, heating to 80°C. When everything has melted, add phase B. Take off heat and pour into molds.

Specification
Appearance: Solid, yellowish bar
Stability: Microbiological stability proven (Water activity value less than 0.75)

CURLING BOOSTER SHAMPOO

400.82.1.1

CONDITIONING. HYDRATING. VEGAN.

Alternative preservation: Cosphaderm® Sodium LAAS, Cosphaderm® Propanediol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	65.60
A	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	5.00
A	Cosphaderm® Sodium LAAS	Sodium LevulinateSodium Anisate	Cosphatec GmbH	1.00
A	Cosphaderm® X soft	Xanthan Gum	Cosphatec GmbH	0.80
B	Plantacare® 2000 UP	Decyl Glucoside	BASF SE	20.00
C	Cosphaderm® E NGM	Lysolecithin	Cosphatec GmbH	1.00
C	Lanette® O	Cetearyl Alcohol	BASF SE	4.00
C	SOFTISAN® conditionHAIR	PCA Glyceryl Oleate	IOI Oleo GmbH	0.50
C	Cotton Oil	Gossypium Herbaceum Seed Oil	Gustav Heess GmbH	2.00
C	Cosphaderm® T-70 NON GMO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.10

Manufacturing Process
Phase A: Combine all ingredients of phase A and stir until everything is dissolved.
Phase B: Slowly add phase B to phase A under stirring. Stir until complete dissolution.
Adjust pH to 5.5 ± 0.05 and heat phase A and B to 70 °C.
Phase C: Combine all ingredients and heat phase C to 70 °C. Add then phase C to phase A and B under
strong stirring and homogenise the formulation.
Adjust pH to 5.2 ± 0.05.

Specification
Appearance: Slightly yellowish gel cream
pH: 5.2 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

INTENSE REPAIR HAIR MASK ALL NATURAL INGREDIENTS

400.85.1.1

CONDITIONING. SMOOTHING. GLOSSY.

Alternative preservation: Cosphaderm® Octiol natural, Cosphaderm® Sodium LAAS

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	75.90
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	5.00
A	Betaine	Betaine	-	2.00
A	Cosphaderm® Sodium LAAS	Sodium LevulinateSodium Anisate	Cosphatec GmbH	0.70
A	Cosphaderm® Octiol natural	Caprylyl Glycol	Cosphatec GmbH	0.50
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.20
B	Cosphaderm® SF-75H	Hydrogenated Lecithin	Cosphatec GmbH	1.00
C	Lanette®N	Cetearyl AlcoholSodium Cetearyl Sulfate	BASF SE	2.50
C	Lanette® O	Cetearyl Alcohol	BASF SE	2.00
C	Shea Butter refined	Butyrospermum Parkii Butter	Gustav Heess GmbH	2.00
C	Coconut Oil	Coco Nucifera Oil	Gustav Heess GmbH	3.00
C	Argan Oil	Argania Spinosa Kernel Oil	Gustav Heess GmbH	2.00
C	Cosphaderm® Feel	Triheptanoin	Cosphatec GmbH	1.50
C	Broccoli Seed Oil	Brassica Oleracea Seed Oil	-	1.00
C	SOFTISAN® conditionHAIR	PCA Glyceryl Oleate	IOI Oleo GmbH	0.50
C	Cosphaderm® T-70 NON GMO ECO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.20

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Add Cosphaderm® SF-75H to phase A and let it soak for 10-20 minutes. Then heat phase A+B to 70 °C.
Phase C: Combine all ingredients of phase C and heat to 70 °C. Add then phase C to phase A+B under
strong stirring and homogenise the formulation.
Adjust the pH to 5.0 ± 0.05.

SPECIFICATION
Appearance: Light beige gel cream
pH: 5.0 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

SCALP PEELING ALL NATURAL INGREDIENTS

400.93.1.1

EXFOLIATING. HYDRATING. SOOTHING.

Alternative preservation: Cosphaderm® Pentiol natural, Cosphaderm® Zinc Lactate natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	85.70
A	Cosphagard® SA natural	Salicylic Acid	Cosphatec GmbH	2.00
B	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	3.00
B	D-Panthenol 75 %	PanthenolAqua	-	0.50
B	Cosphaderm® Sodium Hyaluronate	Sodium Hyaluronate	Cosphatec GmbH	0.20
B	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.20
B	Caffeine Powder	Caffeine	-	1.00
B	Betaine	Betaine	Clariant AG	2.00
B	Cosphaderm® Pentiol natural	Pentylene Glycol	Cosphatec GmbH	5.00
B	Cosphaderm® Zinc Lactate natural	Zinc Lactate	Cosphatec GmbH	0.40

MANUFACTURING PROCESS
Phase A: Combine the ingredients of phase A. Raise the pH to 11 to dissolve Cosphagard® SA natural. When everything is dissolved, lower the pH back to 4-5 again.
Phase B: Add all ingredients from phase B one after another.
Adjust the pH to 4.0 ± 0.05.

SPECIFICATION
Appearance: Clear solution
pH: 4.0 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

LEAVE-IN HAIR CREAM ALL NATURAL INGREDIENTS

400.91.1.1

CONDITIONING. HYDRATING. ANTI-FRIZZ.

Alternative preservation: Cosphaderm® Absolute, Cosphaderm® Octiol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	52.00
A	Inulin	Inulin	-	1.00
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.25
A	Sclerotium Gum	Sclerotium Gum	-	0.25
B	Cosphaderm® Absolute	PropanediolSodium LactateBetaineAqua	Cosphatec GmbH	20.00
C	Cosphaderm® GS Connect	Glyceryl Stearate Citrate	Cosphatec GmbH	2.50
C	Lanette® O	Cetearyl Alcohol	BASF SE	4.00
C	Stearic Acid	Stearic Acid	-	2.00
C	Shea Butter refined	Butyrospermum Parkii Butter	Gustav Heess GmbH	7.00
C	Cosphaderm® Octiol natural	Caprylyl Glycol	Cosphatec GmbH	0.30
C	Argan Oil	Argania Spinosa Kernel Oil	Gustav Heess GmbH	3.00
C	Cosphaderm® Feel	Triheptanoin	Cosphatec GmbH	3.00
C	MCT Oil Typ V Ph. Eur.	Caprylic/Capric Triglyceride	Gustav Heess GmbH	4.00
C	SOFTISAN® conditionHAIR	PCA Glyceryl Oleate	IOI Oleo GmbH	0.50
C	Cosphaderm® T-70 NON GMO ECO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.20

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Add phase B to A while stirring. Then heat phase A+B to 75 °C.
Phase C: Combine all ingredients of phase C and heat to 75 °C. Then add phase C to phase A+B under
strong stirring and homogenise the formulation.
Adjust the pH to 4.5 ± 0.05.

SPECIFICATION
Appearance: White cream
pH: 4.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

WARMING SCALP TREATMENT

400.94.1.1

WARMING. HYDRATING. CARING.

Alternative preservation: Cosphaderm® Pentiol natural, Cosphaderm® Propanediol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	67.40
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	5.00
A	D-Panthenol 75 %	PanthenolAqua	-	0.50
A	Sodium PCA	Sodium PCA	-	1.00
B	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.40
B	Gummi Arabicum	Acacia Senegal Gum	-	0.40
C	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	20.00
C	Cosphaderm® Pentiol natural	Pentylene Glycol	Cosphatec GmbH	5.00
C	Cosphaderm® VBE	Vanillyl Butyl Ether	Cosphatec GmbH	0.30

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Slowly add phase B to A while stirring.
Phase C: Mix all ingredients of phase C and add to phase A+B while stirring.
Adjust the pH to 5.0 ± 0.05.

SPECIFICATION
Appearance: Clear solution
pH: 5.0 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

POWDER TO FOAM SHAMPOO ALL NATURAL INGREDIENTS

400.89.1.1

WATERLESS. INSTANT WATER-ACTIVATED FORMULATION FOR IMMEDIATE USE. CLEAN BEAUTY.

Alternative preservation: Cosphaderm® Zinc Lactate

PHASE	Ingredient	INCI	SUPPLIER	%
A	Sodium Cocoyl Isethionate	Sodium Cocoyl Isethionate	Berg + Schmidt GmbH & Co. KG	53.00
A	Sorbitol	Sorbitol	-	10.00
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	3.00
A	Cosphaderm® KG	Amorphophallus Konjac Root Extract	Cosphatec GmbH	1.00
A	Cosphaderm® Zinc Lactate natural	Zinc Lactate	Cosphatec GmbH	2.00
A	Citric Acid	Citric Acid	-	0.80
A	Hydrolyzed Wheat Protein	Hydrolyzed Wheat Protein	-	1.50
A	Magnesium Stearate	Magnesium Stearate	-	10.00
A	Cosphaderm® SF-75H	Hydrogenated Lecithin	Cosphatec GmbH	1.00
A	CORN PO4 PH "B“	Distarch Phosphate	Agrana	10.00
A	Sensocel® bc 20	Cellulose	CFF GmbH & Co. KG	5.00
B	Sunflower Oil	Helianthus Annuus Seed Oil	Gustav Heess GmbH	2.50
B	Cosphaderm® T-70 NON GMO ECO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.20

MANUFACTURING PROCESS
Phase A: Mix all ingredients together and stir until homogeneous.
Phase B: Combine all ingredients and add phase B to A while stirring.

SPECIFICATION
Appearance: White powder
Stability: Microbiological stability proven (Water activity value less than 0.75)

CAFFEINE SHAMPOO FOR MEN ALL NATURAL INGREDIENTS

600.55.2.1

NURTURING. VITALISING. BOOSTING HAIR GROWTH.

Preservation: Cosphagard® Pol

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	ad 100
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	6.00
A	Natural Caffeine Green	Caffeine	-	1.00
A	Zinc PCA	Zinc PCA	-	0.30
A	Hydrolyzed Wheat Protein	Hydrolyzed Wheat Protein	-	1.00
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	1.00
A	Cosphagard® Pol	AquaSodium LevulinatePotassium Sorbate	Cosphatec GmbH	2.00
B	Plantacare® 1200 UP	Lauryl Glucoside	BASF SE	10.40
B	Plantacare® 818 UP	Coco Glucoside	BASF SE	10.60
B	Dehyton® K	Cocamidopropyl Betaine	BASF SE	3.20
B	Imwitor® PG3 C10	Polyglyceryl-3 Caprate	IOI Oleo GmbH	1.50
B	SOFTISAN® conditionHAIR	PCA Glyceryl Oleate	IOI Oleo GmbH	1.50
C	D-Panthenol 75 %	PanthenolAqua	-	1.00

Manufacturing Process
Phase A: Combine all ingredients of phase A and stir until everything is dissolved.
Phase B: Combine all ingredients and heat phase B to 40 – 50 °C.
Afterwards combine phase A and B while stirring slowly until a homogeneous gel is formed.
Phase C: Add panthenol to the mixture (<40 °C).
Adjust pH to 5.5 ± 0.05.

Specification
Appearance: Yellowish, slightly turbid, viscous gel
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

MILD & FOAMY BABY SHAMPOO

500.30.1.1

GENTLE CLEANSING. MILD. VEGAN.

Alternative preservation: Cosphaderm® Hexiol, Cosphaderm® Pentiol GL, Cosphaderm® Propanediol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	74.00
A	Cosphaderm® Hexiol	1,2-Hexanediol	Cosphatec GmbH	2.50
A	Cosphaderm® Pentiol GL	Pentylene Glycol	Cosphatec GmbH	2.50
A	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	4.00
A	D-Panthenol 75 %	PanthenolAqua	-	1.00
B	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	1.00
C	Plantacare® 818 UP	Coco Glucoside	BASF SE	5.00
C	Plantacare® 2000 UP	Decyl Glucoside	BASF SE	10.00

Manufacturing Process
Phase A: Combine all ingredients of phase A.
Phase B: Add phase B to phase A while stirring and stir until everything is completely dissolved.
Phase C: Prepare phase C and add to phase A+B under slow stirring to prevent foaming.
Adjust pH to 5.5 ± 0.05.

Specification
Appearance: Transparent gel
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

ANTI-DANDRUFF SHAMPOO (A) ALL NATURAL INGREDIENTS

400.62.1.1

CLEANSING. FOAMING. NATURALLY ACTIVE AGAINST DANDRUFF.

Alternative preservation: Cosphaderm® LA-T, Cosphaderm® Sodium pAS natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Sodium Coco Sulfat 30 %	AquaSodium Coco Sulfate	-	30.00
A	Plantacare® 1200 UP	Lauryl Glucoside	BASF SE	4.00
A	Dehyton® K	Cocamidopropyl Betaine	BASF SE	2.00
A	SOFTISAN® conditionHAIR	PCA Glyceryl Oleate	IOI Oleo GmbH	1.00
A	Cosphagard® SA natural	Salicylic Acid	Cosphatec GmbH	3.00
A	Sodium Hydroxide Solution (10 %)	AquaSodium Hydroxide	-	q.s.
B	Demin. Water	Aqua	-	ad 100
B	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.50
B	Cosphaderm® PA ECONAT	Phytic AcidAqua	Cosphatec GmbH	0.10
B	Cosphaderm® Sodium pAS natural	Sodium Anisate	Cosphatec GmbH	0.20
B	Cosphaderm® LA-T	Levulinic AcidGlycerinSodium LevulinateAqua	Cosphatec GmbH	1.00
C	NaCl-Solution 25 %	AquaSodium Chloride	-	3.00
C	Citric Acid Solution (10 %)	AquaCitric Acid	-	q.s.

Manufacturing Process
Phase A: Combine all ingredients of phase A. Raise the pH to 11 to dissolve Cosphagard® SA natural.
Heat phase A to 70 °C.
Phase B: Combine all ingredients and stir until Cosphaderm® X 34 is completely dissolved.
Heat phase B to 70 °C.
Add phase B to phase A under very soft stirring.
Phase C: Add phase C below 40 °C to the finished formulation. Adjust the pH to 4.5 ± 0.05.
The shampoo will thicken within 24 hours.

Specification
Appearance: Clear to yellowish liquid
pH: 4.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

ANTI-DANDRUFF SHAMPOO (B) ALL NATURAL INGREDIENTS

400.62.2.1

CLEANSING. FOAMING. NATURALLY ACTIVE AGAINST DANDRUFF.

Alternative preservation: Cosphaderm® LA-T, Cosphaderm® pAS natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Sodium Coco Sulfat 30 %	AquaSodium Coco Sulfate	-	30.00
A	Plantacare® 1200 UP	Lauryl Glucoside	BASF SE	4.00
A	Dehyton® K	Cocamidopropyl Betaine	BASF SE	2.00
A	SOFTISAN® conditionHAIR	PCA Glyceryl Oleate	IOI Oleo GmbH	1.00
A	Cosphagard® SA natural	Salicylic Acid	Cosphatec GmbH	3.00
A	Cosphaderm® pAS natural	p-Anisic Acid	Cosphatec GmbH	0.20
A	Sodium Hydroxide Solution (10 %)	AquaSodium Hydroxide	-	q.s.
B	Demin. Water	Aqua	-	ad 100
B	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.50
B	Cosphaderm® PA ECONAT	Phytic AcidAqua	Cosphatec GmbH	0.10
B	Cosphaderm® LA-T	Levulinic AcidGlycerinSodium LevulinateAqua	Cosphatec GmbH	1.00
C	NaCl-Solution 25 %	AquaSodium Chloride	-	3.00
C	Citric Acid Solution (10 %)	AquaCitric Acid	-	q.s.

Manufacturing Process
Phase A: Combine all ingredients of phase A. Raise the pH to 11 to dissolve Cosphagard® SA natural and Cosphaderm® pAS natural.
Heat phase A to 70 °C.
Phase B: Combine all ingredients and stir until Cosphaderm® X 34 is completely dissolved.
Heat phase B to 70 °C.
Add phase B to phase A under very soft stirring.
Phase C: Add phase C below 40 °C to the finished formulation. Adjust the pH to 4.5 ± 0.05.
The shampoo will thicken within 24 hours.

Specification
Appearance: Clear to yellowish liquid
pH: 4.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

ANTI-DANDRUFF SHAMPOO (C)

400.62.3.1

CLEANSING. FOAMING. NATURALLY ACTIVE AGAINST DANDRUFF.

Alternative preservation: Cosphaderm® LA-T, Cosphaderm® AS

PHASE	Ingredient	INCI	SUPPLIER	%
A	Sodium Coco Sulfat 30 %	AquaSodium Coco Sulfate	-	30.00
A	Plantacare® 1200 UP	Lauryl Glucoside	BASF SE	4.00
A	Dehyton® K	Cocamidopropyl Betaine	BASF SE	2.00
A	SOFTISAN® conditionHAIR	PCA Glyceryl Oleate	IOI Oleo GmbH	1.00
A	Cosphagard® SA natural	Salicylic Acid	Cosphatec GmbH	3.00
A	Cosphaderm® AS	p-Anisic Acid	Cosphatec GmbH	0.20
A	Sodium Hydroxide Solution (10 %)	AquaSodium Hydroxide	-	q.s.
B	Demin. Water	Aqua	-	ad 100
B	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.50
B	Cosphaderm® PA ECONAT	Phytic AcidAqua	Cosphatec GmbH	0.10
B	Cosphaderm® LA-T	Levulinic AcidGlycerinSodium LevulinateAqua	Cosphatec GmbH	1.00
C	NaCl-Solution 25 %	AquaSodium Chloride	-	3.00
C	Citric Acid Solution (10 %)	AquaCitric Acid	-	q.s.

Manufacturing Process
Phase A: Combine all ingredients of phase A. Raise the pH to 11 to dissolve Cosphagard® SA natural and Cosphaderm® AS.
Heat phase A to 70 °C.
Phase B: Combine all ingredients and stir until Cosphaderm® X 34 is completely dissolved.
Heat phase B to 70 °C.
Add phase B to phase A under very soft stirring.
Phase C: Add phase C below 40 °C to the finished formulation. Adjust the pH to 4.5 ± 0.05.
The shampoo will thicken within 24 hours.

Specification
Appearance: Clear to yellowish liquid
pH: 4.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

DETANGLE SHAMPOO ALL NATURAL INGREDIENTS

400.46.1.1

CONDITIONING. DETANGLING. FREE OF LISTED PRESERVATIVES.

Alternative preservation: Cosphaderm® GeMix, Cosphaderm® CA natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Cosphaderm® GeMix	Glyceryl CaprylateGlyceryl Undecylenate	Cosphatec GmbH	1.00
A	SOFTISAN® conditionHAIR	PCA Glyceryl Oleate	IOI Oleo GmbH	0.50
A	Perlastan® SC	Sodium/Disodium Cocoyl Glutamate	Schill + Seilacher Struktol GmbH	10.00
A	Plantacare® 818 UP	Coco Glucoside	BASF SE	10.00
A	Plantacare® 1200 UP	Lauryl Glucoside	BASF SE	2.00
A	Witarix® 60/40	Caprylic/Capric Triglyceride	IOI Oleo GmbH	0.30
A		Cinnamic Acid	Cosphatec GmbH	0.20
B	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	3.00
B	Cosphaderm® X soft	Xanthan Gum	Cosphatec GmbH	1.00
B	Demin. Water	Aqua	-	71.90
B	Cosphaderm® PA ECONAT	Phytic AcidAqua	Cosphatec GmbH	0.10

Manufacturing Process
Phase A: Combine all ingredients of phase A and stir slowly until Cosphaderm® CA natural is completely
dissolved.
Phase B: Combine all ingredients of phase B and stir until Cosphaderm® X soft is dissolved.
Heat both phases separately to 50 °C and add phase B to phase A under thorough stirring with
the propeller stirrer. Adjust the pH to 5.5 ± 0.05.

Specification
Appearance: Milky, white gel
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

CONDITIONING SHAMPOO ALL NATURAL INGREDIENTS

400.3.1.1

CONDITIONING. SLES-FREE. FREE OF LISTED PRESERVATIVES.

Alternative preservation: Cosphaderm® TOM, Cosphaderm® Propanediol natural, Cosphaderm® Magnolia Extract 98

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	68.90
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	3.00
A	Sulfopon® 1216 G	Sodium Coco Sulfate	BASF SE	6.50
A	Plantacare® 1200 UP	Lauryl Glucoside	BASF SE	7.35
B	Dehyton® K	Cocamidopropyl Betaine	BASF SE	4.90
B	Plantacare® 818 UP	Coco Glucoside	BASF SE	2.50
C	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	1.00
C	Cosphaderm® E NGM	Lysolecithin	Cosphatec GmbH	1.00
D	Cosphaderm® TOM	Pentylene GlycolGlyceryl CaprylateGlyceryl Undecylenate	Cosphatec GmbH	1.80
D	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	3.00
D	Cosphaderm® Magnolia Extract 98	Magnolia Officinalis Bark Extract	Cosphatec GmbH	0.05

Manufacturing Process
Phase A: Combine all ingredients and dissolve Phase A at 40°C.
Phase B: Add phase B to phase A and adjust the pH to 5.0 – 5.5.
Phase C: Add phase C to phase A/B under soft stirring.
Phase D: Dissolve Cosphaderm® Magnolia Extract 98 in Cosphaderm® Propanediol natural and Cosphaderm® TOM. Add phase D to phase A/B/C under stirring.
Adjust the pH to 5.0 ± 0.05.

Specification
Appearance: Yellowish gel
pH: 5.0 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

FaceCare

MATTIFYING DAY CREAM ALL NATURAL INGREDIENTS

100.69.1.1

MOISTURISING. QUICKLY ABSORBING. LIGHT GEL CREAM TEXTURE.

Alternative preservation: Cosphaderm® Zinc Lactate natural, Cosphaderm® GeMix

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	76.30
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	3.00
A	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	2.00
A	Cosphaderm® Zinc Lactate natural	Zinc Lactate	Cosphatec GmbH	0.50
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.30
B	PolyAquol®-2W	Polyglyceryl-2 StearateGlyceryl StearateStearyl Alcohol	Innovacos	4.00
B	Lanette® O	Cetearyl Alcohol	BASF SE	2.50
B	Cosphaderm® Feel	Triheptanoin	Cosphatec GmbH	3.00
B	MCT Oil Typ V Ph. Eur.	Caprylic/Capric Triglyceride	Gustav Heess GmbH	4.00
B	Sunflower Oil	Helianthus Annuus Seed Oil	Gustav Heess GmbH	3.00
B	Cosphaderm® GeMix	Glyceryl CaprylateGlyceryl Undecylenate	Cosphatec GmbH	1.20
B	Cosphaderm® T-70 NON GMO ECO	Helianthus Annuus Seed OilTocopherol	Cosphatec GmbH	0.20

SPECIFICATION
Appearance: White gel cream
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

ANTI SPOT GEL ALL NATURAL INGREDIENTS

100.70.1.1

ANTI INFLAMMATORY. CLARIFYING. PORE SIZE REDUCING.

Alternative preservation: Cosphaderm® Zinc Lactate natural, Cosphaderm® Propanediol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	88.20
A	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	5.00
A	Cosphagard® SA natural	Salicylic Acid	Cosphatec GmbH	2.00
B	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	2.50
B	Cosphaderm® X soft	Xanthan Gum	Cosphatec GmbH	0.70
B	Cosphaderm® Sodium Hyaluronate high	Sodium Hyaluronate	Cosphatec GmbH	0.10
C	Cosphaderm® Zinc Lactate natural	Zinc Lactate	Cosphatec GmbH	1.00
C	Hamamelis Virginiana Leaf Water	Hamamelis Virginiana Leaf Water	-	0.50

Manufacturing Process
Phase A: Combine all ingredients of phase A. Raise the pH to 11 to dissolve Cosphagard® SA natural. When everything is dissolved, lower the pH back to 4-5 again.
Phase B: Combine Glycerin, Cosphaderm® X 34 and Cosphaderm® Sodium Hyaluronate high and stir until the powder is wetted. Then add it to phase A.
Phase C: Add phase C under stirring.
Adjust the pH to 4.0 ± 0.05.

Specification
Appearance: Transparent, clear gel
pH: 4.0 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

RICH & NATURAL W/O CREAM ALL NATURAL INGREDIENTS

100.71.2.1

REGENERATING. PROTECTING. SOFT TEXTURE.

Alternative preservation: Cosphaderm® LA-T, Cosphaderm® pAS natural, Cosphaderm® Pentiol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	70.60
A	Cosphaderm® pAS natural	p-Anisic Acid	Cosphatec GmbH	0.20
A	Cosphaderm® LA-T	Levulinic AcidGlycerinSodium LevulinateAqua	Cosphatec GmbH	1.40
B	Cosphaderm® Pentiol natural	Pentylene Glycol	Cosphatec GmbH	1.50
B	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	3.00
B	Magnesium Sulfate	Magnesium Sulfate	-	0.70
C	Imwitor® 600	Polyglyceryl-3 Polyricinoleate	IOI Oleo GmbH	3.00
C	Candellila Wax	Euphorbia Cerifera (Candelilla) Wax	-	0.60
C	Lanette® O	Cetearyl Alcohol	BASF SE	1.00
C	MCT Oil Typ V Ph. Eur.	Caprylic/Capric Triglyceride	Gustav Heess GmbH	7.00
C	Almond Oil	Prunus Amygdalus Dulcis Oil	Gustav Heess GmbH	5.00
C	Jojoba Oil	Simmondsia Chinensis Seed Oil	Gustav Heess GmbH	2.00
C	Miglyol® Coco 810	Coco-Caprylate / Caprate	IOI Oleo GmbH	3.50
D	Cosphaderm® Tapmix	LecithinHelianthus Annuus Seed OilTocopherolAscorbyl Palmitate	Cosphatec GmbH	0.50

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and raise the pH to 10 to dissolve Cosphaderm® pAS natural. Stir until everything is completely dissolved. Afterwards, adjust the pH to 5.5 ± 0.05 by adding Citric Acid.
Phase B: Add all ingredients of phase B to phase A.
Phase C: Combine all ingredients and heat to 80 °C. Then add phase A/B to phase C while homogenising.
Add phase D to the finished formulation and homogenise.

SPECIFICATION
Appearance: White, slightly beige cream
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

HYDRATING SOFT CREAM ALL NATURAL INGREDIENTS

100.75.1.2

MOISTURISING. PROTECTING. SOOTHING.

Alternative preservation: Cosphaderm® Pocal

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	74.60
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	3.00
A	RonaCare® Nicotinamide	Niacinamide	Merck KGaA	3.50
A	Cosphaderm® KG	Amorphophallus Konjac Root Extract	Cosphatec GmbH	0.20
B	Imwitor 960 K	Glyceryl Stearate SE	IOI Oleo GmbH	2.00
B	Potassium Cetyl Phosphate	Potassium Cetyl Phosphate	-	1.00
B	Babassu Oil	Orbignya Oleifera (Babassu) Seed Oil	Gustav Heess GmbH	6.00
B	Squalane	Squalane	-	3.00
B	Myristyl Myristate	Myristyl Myristate	-	2.00
B	Stearic Acid	Stearic Acid	-	1.00
B	Cosphaderm® T-70 NON GMO ECO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.20
B	Ecorol® 16/98 P	Cetyl Alcohol	Ecogreen Oleochemicals	0.50
C	Cosphaderm® Pocal	PropanediolCaprylyl GlycolCaprylhydroxamic Acid	Cosphatec GmbH	1.00
C	CORN PO4 PH "B“	Distarch Phosphate	Agrana	2.00

SPECIFICATION
Appearance: White emulsion
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

VITAMIN C GLOW DROPS

100.84.1.1

ANTI-AGING. PORE-REFINING. HYDRATING.

Alternative preservation: Cosphaderm® Heptiol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	87.65
A	Cosphaderm® Heptiol natural	1,2-Heptanediol	Cosphatec GmbH	1.00
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	2.00
A	Inulin	Inulin	-	1.00
A	Sodium PCA	Sodium PCA	-	0.50
A	RonaCare® Nicotinamide	Niacinamide	Merck KGaA	5.00
B	Sodium Ascorbyl Phosphate	Sodium Ascorbyl Phosphate	-	2.00
B	Sodium Gluconate	Sodium Gluconate	-	0.15
C	Cosphaderm® Sodium Hyaluronate low	Sodium Hyaluronate	Cosphatec GmbH	0.20
C	Cosphaderm® Sodium Hyaluronate high	Sodium Hyaluronate	Cosphatec GmbH	0.30
C	Cosphaderm® X soft	Xanthan Gum	Cosphatec GmbH	0.20

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Add phase B to phase A.
Phase C: Add phase C and stir until everything is completely dissolved.
Adjust pH to 6.5 ± 0.05 if necessary.

SPECIFICATION
Appearance: Transparent serum
pH: 6.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

JELLY EYE PATCHES

100.88.1.1

HYDRATING. REFRESHING. ANTI-AGING.

Alternative preservation: Cosphaderm® Heptiol natural, Cosphaderm® Pentiol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	87.60
A	Cosphaderm® Pentiol natural	Pentylene Glycol	Cosphatec GmbH	4.00
A	Cosphaderm® Heptiol natural	1,2-Heptanediol	Cosphatec GmbH	1.00
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	3.00
A	Cosphaderm® Sodium Hyaluronate high	Sodium Hyaluronate	Cosphatec GmbH	0.20
A	Cosphaderm® Sodium Hyaluronate low	Sodium Hyaluronate	Cosphatec GmbH	0.20
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.50
A	Cosphaderm® KG	Amorphophallus Konjac Root Extract	Cosphatec GmbH	0.50
A	RonaCare® Nicotinamide	Niacinamide	Merck KGaA	3.00
B	Cosmetic Colour		-	q.s.

MANUFACTURING PROCESS
Phase A: Prepare phase A and stir until dispersed. Adjust the pH to 6.5 ± 0.05.
Phase B: Add colour if wanted.
Heat the mixture to 80-90°C and keep this temperature for 2 – 3 minutes.
Quickly pour the hot mixture into moulds and let it cool down.

SPECIFICATION
Appearance: Translucent or coloured, elastic jelly
pH: 6.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

MINIMALIST FACE MOISTURISER ALL NATURAL INGREDIENTS

100.99.2.1

CLEAN BEAUTY. MINIMALIST FORMULATION. HYDRATING.

Alternative preservation: Cosphaderm® Zinc Lactate natural, Cosphaderm® GMUD, Cosphaderm® Magnolia Extract 98

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	71.50
A	Cosphaderm® Zinc Lactate natural	Zinc Lactate	Cosphatec GmbH	0.50
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.50
B	Cosphaderm® GS Connect	Glyceryl Stearate Citrate	Cosphatec GmbH	3.50
B	Lanette® 16	Cetyl Alcohol	BASF SE	3.00
B	Cosphaderm® GMUD	Glyceryl Undecylenate	Cosphatec GmbH	0.60
B	Shea Butter refined	Butyrospermum Parkii Butter	Gustav Heess GmbH	8.00
B	Sunflower Oil	Helianthus Annuus Seed Oil	Gustav Heess GmbH	12.00
B	Cosphaderm® T-70 NON GMO ECO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.20
C	Cosphaderm® Magnolia Extract 98	Magnolia Officinalis Bark Extract	Cosphatec GmbH	0.20

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Heat the water phase to 70-75 °C.
Phase B: Combine all ingredients of phase B and heat to 75°C. Phase C is added to the oil phase just before emulsion is formed.
Add phase B+C to the water phase while stirring. Homogenise at 40°C.
Adjust the pH to 5.5 ± 0.05.

SPECIFICATION
Appearance: White cream
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

HYDRO BOOST LIP BALM ALL NATURAL INGREDIENTS

100.77.1.1

HYDRATING. NOURISHING. PROTECTING.

Oil protection: Cosphaderm® T-70 NON GMO

PHASE	Ingredient	INCI	SUPPLIER	%
A	Ecorol® 16/98 P	Cetyl Alcohol	Ecogreen Oleochemicals	15.35
A	Castor Oil	Ricinus Communis Seed Oil	Gustav Heess GmbH	15.00
A	Octyldodecanol	Octyldodecanol	-	20.00
A	Kahlwax 2811	Oryza Sativa Bran Cera	Kahl GmbH & Co. KG	2.00
A	Beeswax	Cera alba	Gustav Heess GmbH	29.00
A	Cosphaderm® Sodium Hyaluronate high	Sodium Hyaluronate	Cosphatec GmbH	0.15
A	Cosphaderm® T-70 NON GMO ECO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.50
A	Shea Butter refined	Butyrospermum Parkii Butter	Gustav Heess GmbH	10.00
A	Jojoba Oil	Simmondsia Chinensis Seed Oil	Gustav Heess GmbH	8.00

MANUFACTURING PROCESS
Combine all ingredients of phase A, heating to 80-85 °C. When everything has melted, take off heat and fill into packaging.

SPECIFICATION
Appearance: Solid, yellowish balm
Stability: Microbiological stability proven (Water activity value less than 0.75)

ANTI-POLLUTION SERUM ALL NATURAL INGREDIENTS

100.92.1.1

ANTI-AGING. ANTIOXIDANT. MOISTURISING.

Alternative preservation: Cosphaderm® Dicapo natural, Cosphaderm® Magnolia Extract 98, Cosphaderm® Propanediol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	77.30
A	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	3.00
A	Cosphaderm® X soft	Xanthan Gum	Cosphatec GmbH	0.80
A	Cosphaderm® Sodium Hyaluronate high	Sodium Hyaluronate	Cosphatec GmbH	0.10
A	Cosphaderm® Sodium Hyaluronate low	Sodium Hyaluronate	Cosphatec GmbH	0.10
A	Sodium PCA	Sodium PCA	-	0.50
A	Sodium Citrate	Sodium Citrate	-	0.50
A	Cosphaderm® SF-75H	Hydrogenated Lecithin	Cosphatec GmbH	1.50
B	Cosphaderm® GS Connect	Glyceryl Stearate Citrate	Cosphatec GmbH	2.00
B	Shea Butter refined	Butyrospermum Parkii Butter	Gustav Heess GmbH	2.00
B	Jojoba Oil	Simmondsia Chinensis Seed Oil	Gustav Heess GmbH	4.00
B	MCT Oil Typ V Ph. Eur.	Caprylic/Capric Triglyceride	Gustav Heess GmbH	5.00
B	Camellia Seed Oil	Camellia Oleifera Seed Oil	-	2.00
C	Cosphaderm® Dicapo natural	Caprylyl GlycolPropanediolGlyceryl Caprylate	Cosphatec GmbH	0.70
C	Cosphaderm® Magnolia Extract 98	Magnolia Officinalis Bark Extract	Cosphatec GmbH	0.20
D	Rosemary Extract	Rosmarinus Officinalis ExtractHelianthus Annuus Seed Oil	-	0.05
D	Cosphaderm® T-70 NON GMO ECO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.25

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Combine all ingredients of phase B.
Heat both phases separately to 70-75 °C and add phase B to A while stirring. Then homogenise the formulation.
Phase C: Dissolve Cosphaderm® Magnolia Extract 98 in Cosphaderm® Dicapo natural.
Add phase C and phase D to phase A+B after cooling to 40 °C while stirring.
Adjust the pH to 5.5 ± 0.05.

SPECIFICATION
Appearance: Light beige, shiny emulsion
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

BHA LIQUID PEELING ALL NATURAL INGREDIENTS

100.98.1.1

EXFOLIATING. HYDRATING. SOOTHING.

Alternative preservation: Cosphaderm® Absolute

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	76.00
A	Cosphagard® SA natural	Salicylic Acid	Cosphatec GmbH	2.00
B	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	2.00
B	Cosphaderm® Absolute	PropanediolSodium LactateBetaineAqua	Cosphatec GmbH	20.00

MANUFACTURING PROCESS
Phase A: Combine the ingredients of phase A. Raise the pH to 11 to dissolve Cosphagard® SA natural. When everything is dissolved, lower the pH back to 4-5 again.
Phase B: Add phase B to A while stirring.
Adjust the pH to 4.0 ± 0.05.

SPECIFICATION
Appearance: Clear solution
pH: 4.0 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

HAPPY BARRIER CREAM ALL NATURAL INGREDIENTS

100.90.1.1

HYDRATING. NOURISHING. SKIN BARRIER ENHANCING.

Alternative preservation: Cosphaderm® Absolute, Cosphaderm® GMCY, Cosphaderm® Magnolia Extract 98

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	53.70
A	Cosphaderm® X soft	Xanthan Gum	Cosphatec GmbH	0.60
B	Cosphaderm® Absolute	PropanediolSodium LactateBetaineAqua	Cosphatec GmbH	20.00
C	Cosphaderm® SF-75H	Hydrogenated Lecithin	Cosphatec GmbH	1.00
D	Cosphaderm® GS Connect	Glyceryl Stearate Citrate	Cosphatec GmbH	2.00
D	Lanette® O	Cetearyl Alcohol	BASF SE	2.00
D	Behenyl Alcohol	Behenyl Alcohol	-	2.50
D	Shea Butter refined	Butyrospermum Parkii Butter	Gustav Heess GmbH	5.00
D	Cosphaderm® GMCY	Glyceryl Caprylate	Cosphatec GmbH	0.30
D	Jojoba Oil	Simmondsia Chinensis Seed Oil	Gustav Heess GmbH	3.50
D	MCT Oil Typ V Ph. Eur.	Caprylic/Capric Triglyceride	Gustav Heess GmbH	5.00
D	Squalane	Squalane	-	4.00
D	Cosphaderm® T-70 NON GMO ECO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.20
E	Cosphaderm® Magnolia Extract 98	Magnolia Officinalis Bark Extract	Cosphatec GmbH	0.20

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Add phase B to A while stirring.
Phase C: Add phase C to the water phase while stirring. Then heat the water phase to 70-75 °C.
Phase D: Combine all ingredients of phase D and heat to 75°C. Phase E is added to the oil phase just before emulsion is formed.
Add phase D+E to the water phase while stirring. Homogenise at 40°C.
Adjust the pH to 5.5 ± 0.05.

SPECIFICATION
Appearance: Light beige cream
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

CALMING HYDRO MASK ALL NATURAL INGREDIENTS

100.104.1.1

SOOTHING. MOISTURISING. ANTI-BLEMISH.

Alternative preservation: Cosphaderm® Hexiol, Cosphaderm® Zinc Lactate natural, Cosphaderm® Magnolia Extract 98

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	76.00
A	Cosphaderm® Zinc Lactate natural	Zinc Lactate	Cosphatec GmbH	0.50
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	2.00
A	Cosphaderm® Hexiol natural	1,2-Hexanediol	Cosphatec GmbH	2.00
A	Cosphaderm® Sodium Hyaluronate high	Sodium Hyaluronate	Cosphatec GmbH	0.10
A	Cosphaderm® Sodium Hyaluronate low	Sodium Hyaluronate	Cosphatec GmbH	0.10
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.40
B	Olivem® 1000	Cetearyl OlivateSorbitan Olivate	Hallstar	3.00
B	Lanette® 16	Cetyl Alcohol	BASF SE	2.00
B	Macadamia Oil	Macadamia Ternifolia Seed Oil	Gustav Heess GmbH	4.00
B	MCT Oil Typ V Ph. Eur.	Caprylic/Capric Triglyceride	Gustav Heess GmbH	4.00
B	Shea Butter refined	Butyrospermum Parkii Butter	Gustav Heess GmbH	5.00
B	Evening Primrose Oil	Oenothera Biennis Oil	Gustav Heess GmbH	1.00
B	Cosphaderm® T-70 NON GMO ECO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.20
C	Cosphaderm® Magnolia Extract 98	Magnolia Officinalis Bark Extract	Cosphatec GmbH	0.05

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Heat to 70-75 °C.
Phase B: Combine all ingredients of phase B and heat to 75°C. Phase C is added to the oil phase just before emulsion is formed.
Add phase B+C to the water phase while stirring. Homogenise at 40°C.
Adjust the pH to 5.5 ± 0.05.

SPECIFICATION
Appearance: White cream
pH: 5.5 ± 0.05
Stability: no separation after centrifugation (4000 rpm, 30 min)

SKIN PERFECTING TONER ALL NATURAL INGREDIENTS

100.61.1.2

EXFOLIATING. PORE SIZE REDUCING. SOOTHING.

Alternative preservation: Cosphaderm® Pentiol natural, Cosphaderm® Propanediol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	90.90
A	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	4.00
A	Cosphaderm® Pentiol natural	Pentylene Glycol	Cosphatec GmbH	3.00
A	Cosphagard® SA natural	Salicylic Acid	Cosphatec GmbH	2.00
B	Cosphaderm® PA ECONAT	Phytic AcidAqua	Cosphatec GmbH	0.10

Manufacturing Process
Phase A: Combine all ingredients of phase A. Raise the pH to 11 to dissolve Cosphagard® SA natural
completely.
Phase B: Add phase B and lower the pH to 4.0 ± 0.05.

Specification
Appearance: Clear solution
pH: 4.0 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

ELASTIC JELLY MASK ALL NATURAL INGREDIENTS

100.20.1.1

MOISTURISING. REFRESHING. FREE OF LISTED PRESERVATIVES.

Alternative preservation: Cosphaderm® Pentiol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	4.00
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.60
A	Cosphaderm® KG	Amorphophallus Konjak Root Extract	Cosphatec GmbH	0.60
A	Cosphaderm® Pentiol natural	Pentylene Glycol	Cosphatec GmbH	5.00
A	Demin. Water	Aqua	-	59.80
B	Cosphaderm® SF-75H	Hydrogenated Lecithin	Cosphatec GmbH	2.50
B	Jojoba Oil	Simmondsia Chinensis Seed Oil	Gustav Heess GmbH	5.00
B	Demin. Water	Aqua	-	22.50

Manufacturing Process
Phase A: Mix all ingredients except water, then add water and stir until everything is completely
dissolved.
Phase B: Mix all ingredients and homogenise on high-speed for 5 minutes.
Add phase B to A slowly while gently stirring for 10 minutes.
Adjust the pH to 5.45 – 5.55.
Heat the mixture to 90 – 100 °C and keep this temperature for 2 – 3 minutes (Warning: Lecithins are heat
sensitive. Therefore, the process of heating should be kept to a minimum!).
Pour the hot mixture into a suitable mould as fast as possible and let it cool down.

Specification
Appearance: White to off-white gel
pH: 5.5 ± 0.05
Stability: Microbiological stability proven

MOISTURISING FACE GEL

100.29.1.1

HYDRATING. REFRESHING. FREE OF LISTED PRESERVATIVES.

Alternative preservation: Cosphaderm® Pentiol GL, Cosphaderm® Hexiol

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	ad 100
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	5.00
A	Cosphaderm® Pentiol GL	Pentylene Glycol	Cosphatec GmbH	3.00
A	Cosphaderm® Hexiol	1,2-Hexanediol	Cosphatec GmbH	1.50
A	RonaCare® Nicotinamide	Niacinamide	Merck KGaA	4.00
A	D-Panthenol 75 %	PanthenolAqua	-	2.00
A	Cosphaderm® Sodium Hyaluronate low	Sodium Hyaluronate	Cosphatec GmbH	0.10
B	Carbopol® Ultrez-21	Acrylates/C10-30 Alkyl Acrylate Crosspolymer	Lubrizol	0.40

Manufacturing Process
Combine all ingredients of phase A and stir with a propeller stirrer at 1500 – 2000 rpm until everything is
completely dissolved. Then add phase B to phase A under stirring.
Adjust the pH to 6.0 ± 0.05 to thicken the formulation.

Specification
Appearance: Transparent, clear gel
pH: 6.0 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

MOISTURISING DAYCREAM

100.1.1.1

RICH SKIN FEEL. QUICKLY ABSORBING. FREE OF LISTED PRESERVATIVES.

Alternative preservation: Cosphaderm® Dicapo

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	ad 100
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	3.00
A	Cosphaderm® PA ECONAT	Phytic AcidAqua	Cosphatec GmbH	0.10
B	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.20
B	Aristoflex® AVC	Ammonium Acryloyldimethyltaurate/ VP Copolymer	Clariant AG	1.00
C	Cosphaderm® E NGM	Lysolecithin	Cosphatec GmbH	1.50
	Cegesoft® SH	Shorea Stenoptera Seed Butter	BASF SE	2.50
C	Sunflower Oil	Helianthus Annuus Seed Oil	Gustav Heess GmbH	2.00
C	Jojoba Oil	Simmondsia Chinensis Seed Oil	Gustav Heess GmbH	2.00
C	Softisan® 154	Hydrogenated Palm Oil	IOI Oleo GmbH	1.00
C	Cosphaderm® AP	Ascorbyl Palmitate	Cosphatec GmbH	0.20
C	Cosphaderm® T-70 NON GMO ECO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.30
C	Cosphaderm® Feel	Triheptanoin	Cosphatec GmbH	1.00
D	Cosphaderm® Dicapo	Caprylyl GlycolGlyceryl CaprylateDipropylene Glycol	Cosphatec GmbH	0.70

Manufacturing Process
Phase A: Mix all ingredients together.
Phase B: Slowly add Cosphaderm® X 34 and Aristoflex® AVC under vigorous stirring to phase A.
Continue stirring for approx. 15 min at 500 rpm until complete dissolution. Then heat to 80 °C.
Phase C: Mix all ingredients and heat to 80 °C. Add phase C to phase A+B and
homogenise via vigorous stirring for approx. 10 min.
Phase D: Add Cosphaderm® Dicapo below 40 °C under vigorous stirring.
Adjust pH if necessary.

Specification
Appearance: Shiny, viscous emulsion
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

RICH NIGHT MOISTURISER

100.6.1.1

ANTI-POLLUTION. NOURISHING. FREE OF LISTED PRESERVATIVES.

Alternative preservation: Cosphaderm® Hexiol, Cosphaderm® Propanediol natural, Cosphaderm® Octiol

PHASE	Ingredient	INCI	SUPPLIER	%
A	Cosphaderm® Hexiol	1,2-Hexanediol	Cosphatec GmbH	1.00
A	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	3.00
A	Cosphaderm® Octiol	Caprylyl Glycol	Cosphatec GmbH	0.40
B	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.20
B	Cosphaderm® Sodium Hyaluronate	Sodium Hyaluronate	Cosphatec GmbH	0.20
C	Demin. Water	Aqua	-	ad 100
D	Cosphaderm® Feel	Triheptanoin	Cosphatec GmbH	8.00
D	Sesame Oil	Sesamum Indicum Seed Oil	Gustav Heess GmbH	5.00
D	Avocado Oil	Persea Gratissima Oil	Gustav Heess GmbH	3.00
D	Rosehip Seed Oil	Rosa Canina Fruit Oil	Gustav Heess GmbH	2.00
D	Shea Butter refined	Butyrospermum Parkii Butter	Gustav Heess GmbH	1.50
D	Cocoa Butter	Theobroma Cacao Seed Butter	Gustav Heess GmbH	1.50
D	Lamecreme	Glyceryl StearateGlyceryl Stearate Citrate	-	4.00
D	Ecorol® 16/98 P	Cetyl Alcohol	Ecogreen Oleochemicals	1.50
D	Cosphaderm® E-1000Ac NON GMO	Tocopherol AcetateHelianthus Annuus Seed Oil	Cosphatec GmbH	0.50
D	Cosphaderm® T-70 NON GMO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.20
E	D-Panthenol 75 %	PanthenolAqua	-	1.00

Manufacturing Process
Phase A: Mix phase A and stir until everything is completely dissolved.
Phase B: Add phase B to phase A and stir until dispersed.
Phase C: Slowly add phase C to phase A+B and stir until complete dissolution.
Phase D: Mix all ingredients of phase D and heat phase A+B+C and D separately to 80 °C.
Add phase D slowly to phase A+B+C while stirring.
Phase E: Add Panthenol to the finished formulation (below 40 °C).
Adjust the pH to 5.5 ± 0.05.

Specification
Appearance: Shiny, fluid emulsion
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

ANTI-WRINKLE EYE CREAM ALL NATURAL INGREDIENTS

100.49.1.1

MOISTURISING. NURTURING. ANTI-WRINKLE.

Preservation: Cosphagard® Pol

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	ad 100
A	Cosphaderm® Sodium Hyaluronate low	Sodium Hyaluronate	Cosphatec GmbH	0.20
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.50
A	Cosphagard® Pol	AquaSodium LevulinatePotassium Sorbate	Cosphatec GmbH	2.00
B	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	3.00
B	Sesame Oil	Sesamum Indicum Seed Oil	Gustav Heess GmbH	4.00
B	Evening Primrose Oil	Oenothera Biennis Oil	Gustav Heess GmbH	3.00
B	Jojoba Oil	Simmondsia Chinensis Seed Oil	Gustav Heess GmbH	3.00
B	Shea Butter refined	Butyrospermum Parkii Butter	Gustav Heess GmbH	3.00
B	Wheat Germ Oil	Triticum Vulgare Oil	Gustav Heess GmbH	2.00
B	Almond Oil	Prunus Amygdalus Dulcis Oil	Gustav Heess GmbH	2.00
B	Imwitor 960 K	Glyceryl Stearate SE	IOI Oleo GmbH	3.00
B	Cosphaderm® T-70 NON GMO ECO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.10
B	Lanette® O	Cetearyl Alcohol	BASF SE	0.50
B	Cosphaderm® GS Connect	Glyceryl Stearate Citrate	Cosphatec GmbH	1.00

Manufacturing Process
Phase A: Combine all ingredients of phase A under stirring until Cosphaderm® X 34 is completely dissolved.
Phase B: Combine all ingredients of phase B. Heat both phases separately to 70 °C and add phase B
to phase A under stirring.
After stirring for 5 minutes homogenise the formulation and adjust the pH to 5.5 ± 0.05.

Specification
Appearance: White, shiny emulsion
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

URBAN ANTI-POLLUTION SKIN ELIXIR

100.18.2.1

ANTI-POLLUTION. HIGH SPREADABILITY. FREE OF LISTED PRESERVATIVES.

Alternative preservation: Cosphaderm® Propanediol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	34.30
A	Cosphaderm® Sodium Hyaluronate	Sodium Hyaluronate	Cosphatec GmbH	0.10
A	Cosphaderm® Sodium Hyaluronate low	Sodium Hyaluronate	Cosphatec GmbH	0.10
A	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	10.00
A	Cosphaderm® X soft	Xanthan Gum	Cosphatec GmbH	0.50
A	Cosphaderm® Leo	Dipropylene GlycolEthylhexylglycerinCaprylhydroxamic Acid	Cosphatec GmbH	2.70
B	Cosphaderm® Feel	Triheptanoin	Cosphatec GmbH	4.00
B	Babassu Oil	Orbignya Oleifera Seed Oil	Gustav Heess GmbH	4.00
B	Apricot Kernel Oil	Prunus Armeniaca Kernel Oil	Gustav Heess GmbH	4.00
B	Sesame Oil	Sesamum Indicum Seed Oil	Gustav Heess GmbH	3.00
B	Evening Primrose Oil	Oenothera Biennis Oil	Gustav Heess GmbH	1.00
B	Rosehip Seed Oil	Rosa Canina Fruit Oil	Gustav Heess GmbH	1.00
B	Grape Seed Oil	Vitis Vinifera Seed Oil	Gustav Heess GmbH	1.00
B	Cosphaderm® T-70 NON GMO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.20
B	Cosphaderm® E-1000 NON GMO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.10
B	Ecorol® 16/98 P	Cetyl Alcohol	Ecogreen Oleochemicals	1.00
C	Cosphaderm® SF-75H	Hydrogenated Lecithin	Cosphatec GmbH	3.00
C	Demin. Water	Aqua	-	30.00

Manufacturing Process
Phase A: Prepare phase A and stir at 2000 rpm until complete dissolution.
Phase B: Prepare phase B and heat to 50 °C until everything is melted. Let the mixture cool down to
room temperature.
Phase C: Prepare phase C and stir for 10 min at 800 rpm.
Add phase C to phase B and stir at 2000 rpm to emulsify both phases.
Add phase A to phase B+C and homogenise for 3 minutes.
Adjust the pH to 5.5 ± 0.05.

Specification
Appearance: White, shiny emulsion
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

ANTI-WRINKLE BASE

100.39.1.1

PORE FILLING. LONG LASTING. FREE OF LISTED PRESERVATIVES.

Alternative preservation: Cosphaderm® POP, Cosphaderm® Propanediol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	6.00
A	Natrosol® 250 HX	Hydroxyethylcellulose	-	1.00
A	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	4.00
A	Cosphaderm® Sodium Hyaluronate high	Sodium Hyaluronate	Cosphatec GmbH	0.20
B	Demin. Water	Aqua	-	ad 100
C		PropanediolCaprylyl GlycolPhenylpropanol	Cosphatec GmbH	1.00
C	Water-soluble Perfume	Parfum	Clariant AG	q.s.

Manufacturing Process
Phase A: Combine phase A and add determinalised water to phase A under stirring.
Phase B: Add water.
Phase C: Add Cosphaderm® POP and water-soluble perfume to phase A+B.
Adjust the pH to 5.5 ± 0.05.

Specification
Appearance: Translucent gel
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

WAKE UP SERUM

100.53.1.1

BOOSTING. VITALISING. MOISTURISING.

Preservation: Cosphagard® Cap

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	ad 100
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	5.00
A		PhenoxyethanolCaprylyl Glycol	Cosphatec GmbH	1.00
A	Caffeine Powder	Caffeine	-	1.50
A	Ronacare® Allantoin	Allantoin	Merck KGaA	0.50
B	Cosphaderm® Sodium Hyaluronate low	Sodium Hyaluronate	Cosphatec GmbH	0.20
B	Cosphaderm® Sodium Hyaluronate high	Sodium Hyaluronate	Cosphatec GmbH	0.30
B	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.30

Manufacturing Process
Phase A: Add all ingredients of phase A into a beaker and stir until caffeine and allantoin are completely
dissolved.
Phase B: Add phase B to phase A while stirring vigorous. Stir until no clumps are left.
Adjust pH to 5.5 ± 0.05.

Specification
Appearance: Transparent, clear, slightly viscous liquid
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

BOOSTING SERUM ALL NATURAL INGREDIENTS

100.7.3.1

ANTI-AGING. FAST ABSORBING. HYDRATING.

Alternative preservation: Cosphaderm® Pocal

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	93.50
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	5.00
A	Cosphaderm® Pocal	PropanediolCaprylyl GlycolCaprylhydroxamic Acid	Cosphatec GmbH	1.00
A	Cosphaderm® Sodium Hyaluronate high	Sodium Hyaluronate	Cosphatec GmbH	0.30
A	Cosphaderm® Sodium Hyaluronate low	Sodium Hyaluronate	Cosphatec GmbH	0.20

Manufacturing Process
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Adjust pH to 5.5 ± 0.05 if necessary.

Specification
Appearance: Transparent serum
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

SKIN SMOOTHIE ALL NATURAL INGREDIENTS

100.17.2.1

VITAMIN-RICH. VITALISING. FREE OF LISTED PRESERVATIVES.

Alternative preservation: Cosphaderm® MultiMEG, Cosphaderm® LA-T, Cosphaderm® Propanediol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Cosphaderm® Feel	Triheptanoin	Cosphatec GmbH	10.00
A	Shea Butter refined	Butyrospermum Parkii Butter	Gustav Heess GmbH	1.00
A	Lanette® O	Cetearyl Alcohol	BASF SE	2.00
A	Macadamia Nut Oil	Macadamia Ternifolia Seed Oil	Gustav Heess GmbH	2.00
A	Jojoba Oil	Simmondsia Chinensis Seed Oil	Gustav Heess GmbH	3.00
A	Beeswax	Cera alba	Gustav Heess GmbH	1.00
A	Kahlwax 6290	Rhus Verniciflua Cera	Kahl GmbH & Co. KG	1.00
A	Cosphaderm® E-1000 NON GMO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	1.00
A	Cosphaderm® T-70 NON GMO ECO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.20
A	Imwitor® 375	Glyceryl CitrateLactateLineolateOleate	IOI Oleo GmbH	2.50
B	Demin. Water	Aqua	-	ad 100
B	Cosphaderm® LA-T	Levulinic AcidGlycerinSodium LevulinateAqua	Cosphatec GmbH	1.00
B	Juice from mixed fruits/vegetables	(e.g. cucumber, mango, lemon)	-	25.00
B	Juice from mixed fruits/vegetables	(e.g. zucchini, papaya, ginger)	-	25.00
B	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	2.00
B	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	5.00
B	Cosphaderm® PA ECONAT	Phytic AcidAqua	Cosphatec GmbH	0.20
B	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.50
C	Cosphaderm® MultiMEG	Glyceryl CaprylatePentylene GlycolMagnolia Officinalis Bark Extract	Cosphatec GmbH	1.60

Manufacturing Process
Phase A: Combine all ingredients of phase A.
Phase B: Prepare Glycerin, Cosphaderm® Propanediol natural and Cosphaderm® X 34 first.
Disperse Cosphaderm® X 34 with a stirrer. Peel 50 g fruit/vegetable A and 50 g fruit/vegetable B and crush it separately in a mixer. Filter the crushed fruits in separate beakers. Slowly add the filtered fruits/vegetables and the water to the mixture of Glycerin, Cosphaderm® Propanediol natural and Cosphaderm® X 34 under stirring and stir until complete dissolution.
Add remaining ingredients. Heat phase A and B separately to 70 °C and add phase A to phase B under stirring.
Phase C: Add Cosphaderm® MultiMEG below 40 °C. Adjust the pH value to 5.5 ±
0.05.

Specification
Appearance: Light, shiny cream
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

GREEN DETOX MASK

100.2.2.1

MOISTURISING. DETOXIFYING. FREE OF LISTED PRESERVATIVES.

Alternative preservation: Cosphaderm® Dicapo, Cosphaderm® Propanediol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	ad 100
A	Kaolin	Kaolin	-	10.00
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	8.00
A	Plantacare® 818 UP	Coco Glucoside	BASF SE	3.00
A	Spirulina Powder	Spirulina Platensis Powder	-	2.85
A	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	1.50
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.40
A	Titanium Dioxide	CI 77891	-	0.10
B	Mango Butter	Mangifera Indica Seed Butter	-	6.00
B	PolyAquol®-2W	Polyglyceryl-2 StearateGlyceryl StearateStearyl Alcohol	Innovacos	2.50
B	Beeswax	Cera alba	Gustav Heess GmbH	2.50
B	Ecorol® 16/98	Cetyl Alcohol	Ecogreen Oleochemicals	2.00
B	Cosphaderm® Feel	Triheptanoin	Cosphatec GmbH	1.00
B	Cosphaderm® T-70 NON GMO ECO	TocopherolHelianthus Annuus Seed Oil		0.10
C	Kaolin	Kaolin	-	4.00
C	Cosphaderm® EGCg ECONAT	Camellia Sinensis Leaf Extract	Cosphatec GmbH	0.05
D	Cosphaderm® Dicapo	Caprylyl GlycolGlyceryl CaprylateDipropylene Glycol	Cosphatec GmbH	0.70

Manufacturing Process
Phase A: Mix all ingredients together.
Phase B: Mix phase B and heat phase A and B separately to 75 °C. Emulsify phase A+B and homogenise.
Phase C: Add phase C to phase A+B below 40 °C.
Phase D: Add Cosphaderm® Dicapo to the formulation and allow the mixture to cool down.
Adjust pH to 6.0 ± 0.05.

Specification
Appearance: Creamy, green mask
pH: 6.0 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

HYDRO JELLY MASK

100.21.3.1

INTENSIVELY HYDRATING. RELAXING. FREE OF LISTED PRESERVATIVES.

Alternative preservation: Cosphaderm® Hexiol, Cosphaderm® Pentiol GL, Cosphaderm® Propanediol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	5.00
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.50
A	Cosphaderm® KG	Amorphophallus Konjac Root Extract	Cosphatec GmbH	0.50
B	Demin. Water	Aqua	-	ad 100
C	Cosphaderm® Pentiol GL	Pentylene Glycol	Cosphatec GmbH	5.00
C	Cosphaderm® Hexiol	1,2-Hexanediol	Cosphatec GmbH	1.00
C	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	5.00
C	Cosphaderm® Sodium Hyaluronate low	Sodium Hyaluronate	Cosphatec GmbH	0.20
D	Cosmetic Colour		-	q.s.

Manufacturing Process
Phase A: Prepare phase A and stir until dispersed.
Phase B: Slowly add the water to phase A under stirring and stir until complete dissolution.
Phase C: Prepare phase C and stir for 10 minutes. Add phase C to phase A+B and adjust pH
to 5.5 – 6.0 ± 0.05.
Phase D: Add colour if wanted.
Heat the mixture to its boiling point and keep this temperature for 2 – 3 minutes.
Quickly pour the hot mixture into a casting mould and let it cool.

Specification
Appearance: Translucent or coloured, elastic gel
pH: 5.5 – 6.0 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

BLACK PEELING MASK ALL NATURAL INGREDIENTS

100.26.2.2

PURIFYING. DETOXIFYING. FREE OF LISTED PRESERVATIVES.

Alternative preservation: Cosphaderm® LA-T, Cosphaderm® CA natural, Cosphaderm® Magnolia Extract 98

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	ad 100
A	Kaolin	Kaolin	-	10.00
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	8.00
A	Plantacare® 818 UP	Coco Glucoside	BASF SE	3.00
A	Charcoal Powder	Charcoal Powder	-	2.85
A		Cinnamic Acid	Cosphatec GmbH	0.30
A	Cosphaderm® LA-T	Levulinic AcidGlycerinSodium LevulinateAqua	Cosphatec GmbH	1.20
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.40
B	Mango Butter	Mangifera Indica Seed Butter	-	6.00
B	PolyAquol®-2W	Polyglyceryl-2 StearateGlyceryl StearateStearyl Alcohol	Innovacos	2.50
B	Beeswax	Cera alba	Gustav Heess GmbH	2.50
B	Ecorol® 16/98 P	Cetyl Alcohol	Ecogreen Oleochemicals	2.00
B	Cosphaderm® Feel	Triheptanoin	Cosphatec GmbH	1.00
B	Cosphaderm® T-70 NON GMO ECO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.10
C	Cosphaderm® Magnolia Extract 98	Magnolia Officinalis Bark Extract	Cosphatec GmbH	0.20
D	Kaolin	Kaolin	-	5.00
D	Lipo® AMS	Prunus Amygdalus Dulcis Seed Meal	Vantage Speciality Ingredients, Inc.	1.00

Manufacturing Process
Phase A: Combine all ingredients of phase A except Cosphaderm® CA natural and
Cosphaderm® LA-T and stir for 10 min at 1500 rpm. Add Cosphaderm® CA natural and raise the pH to 11
to dissolve it completely.
Then add Cosphaderm® LA-T to lower the pH again.
Phase B: Prepare phase B and heat phase A and phase B separately to 75 °C.
Add phase B to phase A under thorough stirring with the propeller stirrer and homogenise the mixture.
Phase C: Add Cosphaderm® Magnolia Extract 98 to phase A+B under stirring and below 40 °C.
Phase D: Prepare phase D and add it to the formulation. Let the mask cool down under moderate
stirring.
Adjust the pH to 5.5 ± 0.05.

Specification
Appearance: Black, creamy paste with small exfoliants
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

FACE SHEET MASK

100.27.1.1

ANTI-WRINKLE. MOISTURISING. FREE OF LISTED PRESERVATIVES.

Alternative preservation: Cosphaderm® Propanediol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	ad 100
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	8.00
A	Cosphaderm® Leo	Dipropylene GlycolEthylhexylglycerinCaprylhydroxamic Acid	Cosphatec GmbH	2.00
A	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	5.00
B	Cosphaderm® Sodium Hyaluronate	Sodium Hyaluronate	Cosphatec GmbH	0.05
B	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.20
B	Carbopol® Ultrez 21 Polymer	Acrylates/C10-30 Alkyl Acrylate Crosspolymer	Lubrizol	0.10

Manufacturing Process
This formulation can be prepared at room temperature.
Phase A: Combine all ingredients.
Phase B: Prepare phase B and slowly add to phase A under stirring. Continue stirring for approx. 15 min
at 700 – 1000 rpm until complete dissolution.
Adjust pH to 6.5 ± 0.05 if necessary.

Specification
Appearance: Translucent serum
pH: 6.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

MOISTURISING MAGNOLIA CREAM GEL ALL NATURAL INGREDIENTS

100.13.1.1

ACTIVE AGAINST ACNE. NOURISHING. LIGHT AND SOFT TEXTURE.

Alternative preservation: Cosphaderm® Pentiol natural, Cosphaderm® Propanediol natural, Cosphaderm® Magnolia Extract 98

PHASE	Ingredient	INCI	SUPPLIER	%
A	Imwitor® 375	Glyceryl CitrateLactateLineolateOleate	IOI Oleo GmbH	0.50
A	Babassu Oil	Orbignya Oleifera Seed Oil	Gustav Heess GmbH	2.00
A	Macadamia Nut Oil	Macadamia Ternifolia Seed Oil	Gustav Heess GmbH	2.00
A	Shea Butter refined	Butyrospermum Parkii Butter	Gustav Heess GmbH	1.00
A	Cosphaderm® Feel	Triheptanoin	Cosphatec GmbH	2.00
A	Cosphaderm® T-70 NON GMO ECO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.50
A	Cosphaderm® Magnolia Extract 98	Magnolia Officinalis Bark Extract	Cosphatec GmbH	0.05
B	Cosphaderm® SF-75H	Hydrogenated Lecithin	Cosphatec GmbH	1.00
B	Demin. Water	Aqua	-	23.25
C	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	3.00
C	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	4.00
C	Cosphaderm® Pentiol natural	Pentylene Glycol	Cosphatec GmbH	5.00
C	Cosphaderm® KG	Amorphophallus Konjac Root Extract	Cosphatec GmbH	0.80
C	Demin. Water	Aqua	-	54.90

Manufacturing Process
Phase A: Prepare phase A and melt at 50 °C, then cool down to room temperature.
Phase B: Prepare phase B and stir for 10 min.
Phase C: Prepare all ingredients of phase C except water. Slowly add the water and stir until completely dissolved.
Combine phase A and B and homogenise. Add phase A+B slowly to phase C under stirring.
Adjust pH to 5.5 ± 0.05.

Specification
Appearance: Shiny, viscous emulsion
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

VITALISING SKIN GEL (A) ALL NATURAL INGREDIENTS

100.28.2.1

QUICKLY ABSORBING. RICH SKIN FEEL. HYDRATING.

Alternative preservation: Cosphaderm® LA-T, Cosphaderm® Sodium pAS natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	4.00
A	Cosphaderm® X soft	Xanthan Gum	Cosphatec GmbH	1.00
A	Cosphaderm® Sodium Hyaluronate low	Sodium Hyaluronate	Cosphatec GmbH	0.20
A	Demin. Water	Aqua	CREMER OLEO GmbH & Co. KG	59.70
A	Cosphaderm® LA-T	Levulinic AcidGlycerinSodium LevulinateAqua	Cosphatec GmbH	1.20
B	Cosphaderm® Sodium pAS natural	Sodium Anisate	Cosphatec GmbH	0.40
C	Demin. Water	Aqua	-	22.50
C	Cosphaderm® SF-75H	Hydrogenated Lecithin	Cosphatec GmbH	3.50
C	Sunflower Oil	Helianthus Annuus Seed Oil	Gustav Heess GmbH	5.00
C	Jojoba Oil	Simmondsia Chinensis Seed Oil	Gustav Heess GmbH	2.50

Manufacturing Process
Phase A: Prepare phase A and stir until everything is completely dissolved. Adjust pH value to 5.5.
Phase B: Add Cosphaderm® Sodium pAS natural to phase A under stirring.
Phase C: Prepare phase C and homogenise for 5 minutes with high performance disperser (stator/rotor) at max. speed.
Add phase C to phase A+B in small steps under stirring.
Adjust pH value to 5.5 ± 0.05.

Specification
Appearance: Shiny emulsion
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

VITALISING SKIN GEL (B) ALL NATURAL INGREDIENTS

100.28.3.1

QUICKLY ABSORBING. RICH SKIN FEEL. HYDRATING.

Alternative preservation: Cosphaderm® LA-T, Cosphaderm® pAS natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	4.00
A	Cosphaderm® X soft	Xanthan Gum	Cosphatec GmbH	1.00
A	Cosphaderm® Sodium Hyaluronate low	Sodium Hyaluronate	Cosphatec GmbH	0.20
A	Demin. Water	Aqua	CREMER OLEO GmbH & Co. KG	59.70
A	Cosphaderm® pAS natural	p-Anisic Acid	Cosphatec GmbH	0.40
A	Cosphaderm® LA-T	Levulinic AcidGlycerinSodium LevulinateAqua	Cosphatec GmbH	1.20
B	Demin. Water	Aqua	-	22.50
B	Cosphaderm® SF-75H	Hydrogenated Lecithin	Cosphatec GmbH	3.50
B	Sunflower Oil	Helianthus Annuus Seed Oil	Gustav Heess GmbH	5.00
B	Jojoba Oil	Simmondsia Chinensis Seed Oil	Gustav Heess GmbH	2.50

Manufacturing Process
Phase A: Prepare phase A. Raise the pH to 10 to dissolve Cosphaderm® pAS natural and stir until everything is completely dissolved.
Afterwards, adjust the pH to 5.5 ± 0.05 by adding Citric Acid.
Phase B: Prepare phase C and homogenise for 5 minutes with high performance disperser (stator/rotor) at max. speed.
Add phase B to phase A in small steps under stirring.
Adjust pH value to 5.5 ± 0.05.

Specification
Appearance: Shiny emulsion
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

VITALISING SKIN GEL (C)

100.28.4.1

QUICKLY ABSORBING. RICH SKIN FEEL. HYDRATING.

Alternative preservation: Cosphaderm® LA-T, Cosphaderm® AS

PHASE	Ingredient	INCI	SUPPLIER	%
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	4.00
A	Cosphaderm® X soft	Xanthan Gum	Cosphatec GmbH	1.00
A	Cosphaderm® Sodium Hyaluronate low	Sodium Hyaluronate	Cosphatec GmbH	0.20
A	Demin. Water	Aqua	CREMER OLEO GmbH & Co. KG	59.70
A	Cosphaderm® AS	p-Anisic Acid	Cosphatec GmbH	0.40
A	Cosphaderm® LA-T	Levulinic AcidGlycerinSodium LevulinateAqua	Cosphatec GmbH	1.20
B	Demin. Water	Aqua	-	22.50
B	Cosphaderm® SF-75H	Hydrogenated Lecithin	Cosphatec GmbH	3.50
B	Sunflower Oil	Helianthus Annuus Seed Oil	Gustav Heess GmbH	5.00
B	Jojoba Oil	Simmondsia Chinensis Seed Oil	Gustav Heess GmbH	2.50

Manufacturing Process
Phase A: Prepare phase A. Raise the pH to 10 to dissolve Cosphaderm® AS and stir until everything is completely dissolved.
Afterwards, adjust the pH to 5.5 ± 0.05 by adding Citric Acid.
Phase B: Prepare phase B and homogenise for 5 minutes with high performance disperser (stator/rotor) at max. speed.
Add phase B to phase A in small steps under stirring.
Adjust pH value to 5.5 ± 0.05.

Specification
Appearance: Shiny emulsion
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

AFTER-SUN GEL

100.54.2.1

COOLING. STRESS-RELIEVING. FREE OF LISTED PRESERVATIVES.

Alternative preservation: Cosphaderm® LA-T, Cosphaderm® CA natural, Cosphaderm® Pentiol GL

PHASE	Ingredient	INCI	SUPPLIER	%
A	Cosphaderm® X soft	Xanthan Gum	Cosphatec GmbH	0.50
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	5.00
A	Cosphaderm® Sodium Hyaluronate	Sodium Hyaluronate	Cosphatec GmbH	0.20
A	D-Panthenol 75 %	PanthenolAqua	-	1.00
A	Cosphaderm® Pentiol GL	Pentylene Glycol	Cosphatec GmbH	3.00
B	Demin. Water	Aqua	-	ad 100
B		Cinnamic Acid	Cosphatec GmbH	0.20
B	Witch Hazel Water	Hamamelis virginiana water	-	10.00
	Ronacare® Allantoin	Allantoin	Merck KGaA	0.20
B	Aloe Vera Powder	Aloe Barbadensis Leaf Juice Powder	-	0.50
B	Cosphaderm® LA-T	Levulinic AcidGlycerinSodium LevulinateAqua	Cosphatec GmbH	1.00

Manufacturing Process
Phase A: Combine all ingredients of phase A and mix with a stirring rod, then set aside.
Phase B: Add Cosphaderm® CA natural, witch hazel water, allantoin and aloe vera powder to the water
and increase the pH value to 9 – 10. Stir until the powder has dissolved completely. Afterwards, add
Cosphaderm® LA-T to the mixture.
Add phase B to phase A and stir until a slightly viscous gel is formed.
Adjust pH to 5.5 ± 0.05.

Specification
Appearance: Yellowish, clear, slightly viscous gel
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

DAILY FACIAL CREAM ALL NATURAL INGREDIENTS

100.59.1.1

MOISTURISING. CARING. HYDRATING.

Preservation: Cosphagard® Pol

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	ad 100
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	3.00
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.50
A	Cosphagard® Pol	AquaSodium LevulinatePotassium Sorbate	Cosphatec GmbH	1.50
B	Cosphaderm® Feel	Triheptanoin	Cosphatec GmbH	5.00
B	Cosphaderm® GS Connect	Glyceryl Stearate Citrate	Cosphatec GmbH	2.50
B	Witarix® 60/40	Caprylic/Capric Triglyceride	IOI Oleo GmbH	5.00
B	Softisan® 154	Hydrogenated Palm Oil	IOI Oleo GmbH	1.00
B	Shea Butter refined	Butyrospermum Parkii Butter	Gustav Heess GmbH	5.00
B	Ecorol® 16/98 P	Cetyl Alcohol	Ecogreen Oleochemicals	2.00

Manufacturing Process
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Combine all ingredients of phase B.
Heat both phases separately to 70 °C and add phase B to A while stirring very fast.
Adjust the pH to 5.5 ± 0.05.

Specification
Appearance: White cream
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

BOOSTING GLOW MIST

100.35.1.1

REFRESHING. SKIN BOOSTING. FREE OF LISTED PRESERVATIVES.

Alternative preservation: Cosphaderm® Propanediol natural, Cosphaderm® Hexiol

PHASE	Ingredient	INCI	SUPPLIER	%
A	Aloe Vera 0.05 %	Aloe Barbadensis Leaf Juice Powder	-	76.10
A	RonaCare® Nicotinamide	Niacinamide	Merck KGaA	3.50
A	Cosphaderm® Sodium Hyaluronate low	Sodium Hyaluronate	Cosphatec GmbH	0.20
A	D-Panthenol 75 %	PanthenolAqua	-	1.00
A	Cosphaderm® Hexiol	1,2-Hexanediol	Cosphatec GmbH	1.50
A	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	5.00
A	Cosphaderm® PA ECONAT	Phytic AcidAqua	Cosphatec GmbH	0.10
B	Olive Oil	Olea Europaea Fruit Oil	Gustav Heess GmbH	3.50
B	Argan Oil	Argania Spinosa Kernel Oil	Gustav Heess GmbH	2.50
B	Avocado Oil	Persea Gratissima Oil	Gustav Heess GmbH	2.00
B	Evening Primrose Oil	Oenothera Biennis Oil	Gustav Heess GmbH	1.50
B	Rosehip Seed Oil	Rosa Canina Fruit Oil	Gustav Heess GmbH	1.00
B	Jojoba Oil	Simmondsia Chinensis Seed Oil	Gustav Heess GmbH	1.50
B	Macadamia Nut Oil	Macadamia Ternifolia Seed Oil	Gustav Heess GmbH	0.50
B	Cosphaderm® T-70 NON GMO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.10

Manufacturing Process
Phase A: Combine all ingredients of phase A and stir until complete dissolution.
Adjust the pH value to 5.5 ± 0.05.
Phase B: Prepare phase B in a separate beaker.
Add phase B to phase A without stirring and pour mixture into spray flask.

Specification
Appearance: Two-phase system with oil phase on top of translucent water phase
pH: 5.5 ± 0.05
Stability: Microbiological stability proven

BEAUTY OIL ALL NATURAL INGREDIENTS

100.19.1.1

SILKY SKIN FEEL. NOURISHING. ANTIOXIDANT.

Oil protection: Cosphaderm® T-70 NON GMO, Cosphaderm® Magnolia Extract 98

PHASE	Ingredient	INCI	SUPPLIER	%
A	Almond Oil	Prunus Amygdalus Dulcis Oil	Gustav Heess GmbH	40.00
A	Rosehip Seed Oil	Rosa Canina Fruit Oil	Gustav Heess GmbH	3.00
A	Jojoba Oil	Simmondsia Chinensis Seed Oil	Gustav Heess GmbH	45.00
A	Evening Primrose Oil	Oenothera Biennis Oil	Gustav Heess GmbH	2.60
A	Pomegranate Seed Oil	Punica Granatum Seed Oil	Gustav Heess GmbH	4.00
A	Grape Seed Oil	Vitis Vinifera Seed Oil	Gustav Heess GmbH	5.00
A	Cosphaderm® T-70 NON GMO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.20
A	Cosphaderm® Magnolia Extract 98	Magnolia Officinalis Bark Extract	Cosphatec GmbH	0.20
A	Perfume	Parfum	-	q.s.

Manufacturing Process
Phase A: Mix all ingredients together and heat to 50 °C until pomegranate seed oil is melted.
Stir phase A until complete dissolution.

Specification
Appearance: Yellow liquid
Stability: Microbiological stability proven (Water activity value less than 0.75)

NATURAL LIP BALM ALL NATURAL INGREDIENTS

100.33.1.1

BALMY. PROTECTING. FREE OF LISTED PRESERVATIVES.

Alternative preservation: Cosphaderm® Magnolia Extract 98

PHASE	Ingredient	INCI	SUPPLIER	%
A	Almond Oil	Prunus Amygdalus Dulcis Oil	Gustav Heess GmbH	31.70
A	Wool Fat	Lanolin	Gustav Heess GmbH	20.00
A	Beeswax	Cera alba	Gustav Heess GmbH	19.00
A	Shea Butter refined	Butyrospermum Parkii Butter	Gustav Heess GmbH	19.00
A	Cocoa Butter	Theobroma Cacao Seed Butter	Gustav Heess GmbH	10.00
A	Cosphaderm® T-70 NON GMO ECO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.10
A	Cosphaderm® Magnolia Extract 98	Magnolia Officinalis Bark Extract	Cosphatec GmbH	0.20

Manufacturing Process
Prepare phase A and heat to 70 °C until fully melted.
Stir until complete dissolution.
Fill into lip balm container and let it cool.

Specification
Appearance: Yellow balm
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

Cleansing

HYGIENIC HAND GEL ALL NATURAL INGREDIENTS

300.66.1.1

DISINFECTING. NON-STICKY. FAST ABSORBING.

Alternative preservation: Cosphaderm® Pentiol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	49.60
A	Cosphaderm® X soft	Xanthan Gum	Cosphatec GmbH	0.40
B	Cosphaderm® Pentiol natural	Pentylene Glycol	Cosphatec GmbH	20.00
C	Ethanol	Alcohol	-	30.00

Manufacturing Process
Phase A: Add Cosphaderm® X soft to the water and stir until it’s completely dissolved.
Phase B: Add phase B in small steps to phase A while stirring at 1500rpm.
Phase C: Add phase C in small steps to phase A+B while stirring at 1500rpm.
Adjust the pH to 7.0 ± 0.05.

Specification
Appearance: translucent, viscous gel
pH: 7.0 ± 0.05

Tested against bacteria according to DIN EN 1500, 1276, 1650.

BATH BOMB ALL NATURAL INGREDIENTS

300.68.1.1

FIZZY. SOOTHING. RELAXING.

Alternative preservation: Cosphaderm® GMCY

PHASE	Ingredient	INCI	SUPPLIER	%
A	Sodium Bicarbonate	Sodium Bicarbonate	-	42.00
A	Citric Acid	Citric Acid	-	21.00
A	Corn Starch	Zea Mays Starch	-	20.00
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.20
A	BergaSoft SCI 80	Sodium Cocoyl Isethionate	Berg + Schmidt GmbH & Co. KG	2.50
B	Cosphaderm® GMCY	Glyceryl Caprylate	Cosphatec GmbH	0.80
B	Coconut Oil	Coco Nucifera Oil	Gustav Heess GmbH	13.50

Manufacturing Process
Phase A: Combine all ingredients of phase A.
Phase B: Melt all ingredients of phase B (35-40°C) and add to phase A. Mix until everything is homogeneous.
Press mixture into molds.

Specification
Appearance: Solid, white bar
Stability: Microbiological stability proven (Water activity value less than 0.75)

REFRESHING MOUTHWASH ALL NATURAL INGREDIENTS

300.80.1.1

NATURAL. MILD. ALCOHOL-FREE.

Alternative preservation: Cosphaderm® Propanediol natural, Cosphaderm® Zinc Lactate natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	82.90
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	5.00
A	Xylitol	Xylitol	-	3.00
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.05
B	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	8.00
B	Menthol	Menthol	-	0.05
C	Dehyton® K	Cocamidopropyl Betaine	BASF SE	0.10
C	Cosphaderm® Zinc Lactate natural	Zinc Lactate	Cosphatec GmbH	0.40
C	Potassium Citrate	Potassium Citrate	-	0.50
D	Cosmetic Colour		-	q.s.

MANUFACTURING PROCESS
Phase A: Combine all ingredients and stir until everything is completely dissolved.
Phase B: Dissolve the menthol in Cosphaderm® Propanediol natural add phase B to phase A under soft stirring.
Phase C: Add all ingredients of phase C and stir until everything is completely dissolved.
Phase D: Add colour if wanted.
Adjust the pH to 7.0 ± 0.05.

SPECIFICATION
Appearance: Transparent solution
pH: 7.0 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

GENTLE BODY WASH ALL NATURAL INGREDIENTS

300.73.1.1

NATURAL. FREE OF SLES. MILD CLEANSING.

Alternative preservation: Cosphaderm® Sodium LAAS

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	63.50
A	Sulfopon® 1216 G	Sodium Coco Sulfate	BASF SE	5.50
B	Plantacare® 818 UP	Coco GlucosideAqua	BASF SE	15.00
B	Dehyton® K	Cocamidopropyl BetaineAqua	BASF SE	5.00
B	Perlastan® SC	Sodium/Disodium Cocoyl GlutamateAqua	Schill + Seilacher Struktol GmbH	5.00
C	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	2.00
C	Sodium PCA	Sodium PCAAqua	-	1.00
C	Cosphaderm® Sodium LAAS	Sodium LevulinateSodium Anisate	Cosphatec GmbH	1.00
D	Sodium Chloride	Sodium Chloride	-	2.00

MANUFACTURING PROCESS
Phase A: Dissolve Phase A at 40°C.
Phase B: Combine all ingredients of phase B. Add Phase B to A under stirring.
Phase C: Add all ingredients one by one under moderate speed.
Add phase D to thicken the formulation.
Adjust the pH to 5.5 ± 0.05.

SPECIFICATION
Appearance: Slightly yellow, transparent gel
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

NATURAL JELLY SOAP ALL NATURAL INGREDIENTS

300.96.1.1

MILD. CLEANSING. FOAMING.

Alternative preservation: Cosphaderm® Pentiol natural, Cosphaderm® Sodium LAAS

PHASE	Ingredient	INCI	SUPPLIER	%
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	5.00
A	Cosphaderm® Pentiol natural	Pentylene Glycol	Cosphatec GmbH	3.00
A	Cosphaderm® KG	Amorphophallus Konjac Root Extract	Cosphatec GmbH	0.50
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.50
B	Demin. Water	Aqua	-	69.50
B	Perlastan® SC	Sodium/Disodium Cocoyl Glutamate	Schill + Seilacher Struktol GmbH	8.00
B	Plantacare® 818 UP	Coco Glucoside	BASF SE	12.00
B	SOFTISAN® conditionHAIR	PCA Glyceryl Oleate	IOI Oleo GmbH	0.50
C	Cosphaderm® Sodium LAAS	Sodium LevulinateSodium Anisate	Cosphatec GmbH	1.00

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until dispersed.
Phase B: Prepare phase B and lower the pH to ~ 5.5.
Add phase C and phase A to phase B.
Adjust the pH to 5.5 ± 0.05.

Heat the prepared solution to 80 – 90 °C and stir at this temperature for 2 – 3 min.
Quickly pour the warm mixture into moulds and let it cool down.

SPECIFICATION
Appearance: Clear, solid, elastic jelly
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

BALM TO MILK FACIAL CLEANSER ALL NATURAL INGREDIENTS

300.81.1.1

GENTLE CLEANSING. MAKE-UP REMOVING. VEGAN.

Alternative preservation: Cosphaderm® MultiMEG

PHASE	Ingredient	INCI	SUPPLIER	%
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	40.00
A	Sucrose Stearate	Sucrose Stearate	-	3.00
B	MCT Oil Typ V Ph. Eur.	Caprylic/Capric Triglyceride	Gustav Heess GmbH	35.50
B	Argan Oil	Argania Spinosa Kernel Oil	Gustav Heess GmbH	20.00
B	Cosphaderm® T-70 NON GMO ECO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.50
C	Cosphaderm® MultiMEG	Glyceryl CaprylatePentylene GlycolMagnolia Officinalis Bark Extract	Cosphatec GmbH	1.00

Manufacturing Process
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Combine all ingredients of phase B.
Heat both phases separately to 70-75 °C and add phase B to A very slowly while homogenising.
Phase C: Cool down to 40°C and add Phase C.

Specification
Appearance: Slightly yellowish gel
Stability: Microbiological stability proven (Water activity value less than 0.75)

SOFT CLEANSING FOAM ALL NATURAL INGREDIENTS

300.83.1.1

GENTLE CLEANSING. REFRESHING. SOOTHING.

Alternative preservation: Cosphaderm® GeMix, Cosphaderm® Pentiol natural, Cosphaderm® Propanediol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	83.40
A	Cosphaderm® Pentiol natural	Pentylene Glycol	Cosphatec GmbH	3.00
A	Cosphaderm® PA ECONAT	Phytic AcidAqua	Cosphatec GmbH	0.10
A	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	3.00
A	D-Panthenol 75 %	PanthenolAqua	-	1.00
B	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.10
B	Cosphaderm® Sodium Hyaluronate	Sodium Hyaluronate	Cosphatec GmbH	0.10
C	Plantacare® 818 UP	Coco Glucoside	BASF SE	4.00
C	Perlastan® SC	Sodium/Disodium Cocoyl Glutamate	Schill + Seilacher Struktol GmbH	4.00
C	SOFTISAN® conditionHAIR	PCA Glyceryl Oleate	IOI Oleo GmbH	0.50
C	Cosphaderm® GeMix	Glyceryl CaprylateGlyceryl Undecylenate	Cosphatec GmbH	0.80

Manufacturing Process
Phase A: Combine all ingredients of phase A and stir until everything is dissolved.
Phase B: Add phase B to phase A under stirring.
Phase C: Combine all ingredients of phase C separately. Add then phase C to phase A and B under
stirring.
Adjust pH to 5.5 ± 0.05.

Specification
Appearance: Transparent solution
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

NATURAL PEELING GEL ALL NATURAL INGREDIENTS

300.95.1.1

NATURAL PEELING BEADS. REFINING. CLEANSING.

Alternative preservation: Cosphaderm® Sodium LAAS, Cosphaderm® Propanediol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	81.00
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	1.00
A	Potassium Chloride	Potassium Chloride	-	1.00
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	3.50
A	Sorbitol	Sorbitol	-	2.00
A	Cosphaderm® Sodium LAAS	Sodium AnisateSodium Levulinate	Cosphatec GmbH	1.00
A	D-Panthenol 75 %	PanthenolAqua	-	0.50
A	Cosphaderm® Propanediol natural	Propanediol	Cosphatec GmbH	5.00
B	Plantacare® 2000 UP	Decyl Glucoside	BASF SE	4.00
C	WorléeBeads Jojoba 20/60	Hydrogenated Jojoba Oil	Worlée-Chemie GmbH	1.00

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Add phase B to A carefully to avoid foaming.
Adjust the pH to 5.5 ± 0.05.
Phase C: Add phase C to the final formulation while stirring.

SPECIFICATION
Appearance: Transparent gel with small peeling beads
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

SOFT CREAM SOAP

300.47.2.1

CLEANSING. FOAMING. FREE OF LISTED PRESERVATIVES.

Alternative preservation: Cosphaderm® Sodium LAAS, Cosphaderm® PhP

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	ad 100
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	5.00
A	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.50
A	Cosphaderm® PA ECONAT	Phytic AcidAqua	Cosphatec GmbH	0.10
A	Carbopol® Ultrez 21 Polymer	Acrylates/C10-30 Alkyl Acrylate Crosspolymer	Lubrizol	0.40
A	Cosphaderm® Sodium LAAS	Sodium LevulinateSodium Anisate	Cosphatec GmbH	1.00
B	Texapon® NSO UP	Sodium Laureth Sulfate	BASF SE	15.00
B	Plantacare® 818 UP	Coco Glucoside	BASF SE	12.00
B	Sunflower Oil	Helianthus Annuus Seed Oil	Gustav Heess GmbH	2.00
B	Almond Oil	Prunus Amygdalus Dulcis Oil	Gustav Heess GmbH	2.00
B	Jojoba Oil	Simmondsia Chinensis Seed Oil	Gustav Heess GmbH	2.00
B	Cosphaderm® Feel	Triheptanoin	Cosphatec GmbH	2.00
B	Cosphaderm® T-70 NON GMO ECO	TocopherolHelianthus Annuus Seed Oil	Cosphatec GmbH	0.30
C		Phenylpropanol	Cosphatec GmbH	0.30

Manufacturing Process
This formulation can be prepared at room temperature.
Phase A: Combine all ingredients and stir until everything is completely dissolved.
Phase B: Combine phase B separately and add phase B to phase A under soft stirring. Stir until both
phases are mixed.
Phace C: Add Cosphaderm® PhP to phase A+B. Adjust th pH to 5.5 ± 0.05.

Specification
Appearance: Transparent liquid
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

PURIFYING CLEANSING LOTION

300.32.3.1

MAKE-UP REMOVING. PURIFYING. CLEANSING.

Preservation: Cosphagard® Pol, Cosphaderm® GMCY

PHASE	Ingredient	INCI	SUPPLIER	%
A	Cosphaderm® Feel	Triheptanoin	Cosphatec GmbH	10.00
A	Almond Oil	Prunus Amygdalus Dulcis Oil	Gustav Heess GmbH	12.00
A	Lanette® O	Cetearyl Alcohol	BASF SE	5.00
A	Cosphaderm® SF-75H	Hydrogenated Lecithin	Cosphatec GmbH	2.00
A	Cosphaderm® GMCY	Glyceryl Caprylate	Cosphatec GmbH	0.30
B	Demin. Water	Aqua	-	ad 100
B	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	2.00
B	Cosphaderm® PA ECONAT	Phytic AcidAqua	Cosphatec GmbH	0.20
B	Cosphagard® Pol	AquaSodium LevulinatePotassium Sorbate	Cosphatec GmbH	2.00
B	Cosphaderm® X 34	Xanthan Gum	Cosphatec GmbH	0.50
C	D-Panthenol 75 %	PanthenolAqua	-	1.00
C	Ronacare® Allantoin	Allantoin	Merck KGaA	0.50

Manufacturing Process
Phase A: Prepare phase A and heat to 65 °C.
Phase B: Combine all ingredients except Cosphaderm® X 34. Slowly add Cosphaderm® X 34 to phase B
under stirring.
Stir until complete dissolution. Then heat phase A and phase B separately to 65 °C. Add phase B to
phase A to emulsify both phases. Stir until the formulation is cooled down.
Phase C: Add phase C below 30 °C and stir until everything is mixed.
Adjust the pH to 5.5 ± 0.05 if necessary.

Specification
Appearance: White gel
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

GENTLE SKIN PERFECTING SCRUB ALL NATURAL INGREDIENTS

300.15.3.1

MILD. NATURALLY ACTIVE AGAINST ACNE. CLEANSING.

Alternative preservation: Cosphaderm® LA-T, Cosphaderm® Sodium pAS natural, Cosphaderm® Pentiol natural

PHASE	Ingredient	INCI	SUPPLIER	%
A	Demin. Water	Aqua	-	71.25
A	Glycerin	Glycerin	CREMER OLEO GmbH & Co. KG	4.00
A	Cosphaderm® PA ECONAT	Phytic AcidAqua	Cosphatec GmbH	0.10
A	Cosphaderm® Sodium pAS natural	Sodium Anisate	Cosphatec GmbH	0.20
A	Cosphaderm® LA-T	Levulinic AcidGlycerinSodium LevulinateAqua	Cosphatec GmbH	1.00
A	Cosphagard® SA natural	Salicylic Acid	Cosphatec GmbH	1.00
A	Cosphaderm® Pentiol natural	Pentylene Glycol	Cosphatec GmbH	3.00
B	Cosphaderm® X 34