Wir verstehen die Anforderungen und Fragestellungen von Kosmetik-Entwicklern. Darum verbringen wir viel Zeit mit Anwendungstechnik in unserem In-House Labor. Hier untersuchen wir die Einarbeitung und Wirkung von Rohstoffen, um unseren Kunden den bestmöglichen Support und passende Empfehlungen bieten zu können.
Ein ausgewähltes Set an Formulierungen haben wir hier zum Download bereitgestellt – viel Spaß damit!
ANTI-AGING. ANTIOXIDANT. MOISTURISING.
Alternative preservation: Cosphaderm® Dicapo natural, Cosphaderm® Magnolia Extract 98, Cosphaderm® Propanediol natural
| PHASE | Ingredient | Cosmos | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water |
Aqua
|
-
|
77.30 | |
| A | Cosphaderm® Propanediol natural |
Propanediol
|
Cosphatec GmbH
|
3.00 | |
| A | Cosphaderm® X soft |
Xanthan Gum
|
Cosphatec GmbH
|
0.80 | |
| A | Cosphaderm® Sodium Hyaluronate high |
Sodium Hyaluronate
|
Cosphatec GmbH
|
0.10 | |
| A | Cosphaderm® Sodium Hyaluronate low |
Sodium Hyaluronate
|
Cosphatec GmbH
|
0.10 | |
| A | Sodium PCA |
Sodium PCA
|
-
|
0.50 | |
| A | Sodium Citrate |
Sodium Citrate
|
-
|
0.50 | |
| A | Cosphaderm® SF-75H |
Hydrogenated Lecithin
|
Cosphatec GmbH
|
1.50 | |
| B | Cosphaderm® GS Connect |
Glyceryl Stearate Citrate
|
Cosphatec GmbH
|
2.00 | |
| B | Shea Butter refined |
Butyrospermum Parkii Butter
|
Gustav Heess GmbH
|
2.00 | |
| B | Jojoba Oil |
Simmondsia Chinensis Seed Oil
|
Gustav Heess GmbH
|
4.00 | |
| B | MCT Oil Typ V Ph. Eur. |
Caprylic/Capric Triglyceride
|
Gustav Heess GmbH
|
5.00 | |
| B | Camellia Seed Oil |
Camellia Oleifera Seed Oil
|
-
|
2.00 | |
| C | Cosphaderm® Dicapo natural |
Caprylyl GlycolPropanediolGlyceryl Caprylate
|
Cosphatec GmbH
|
0.70 | |
| C | Cosphaderm® Magnolia Extract 98 |
Magnolia Officinalis Bark Extract
|
Cosphatec GmbH
|
0.20 | |
| D | Cosphaderm® Tocopharin |
TocopherolHelianthus Annuus Seed OilCarnosic Acid
|
Cosphatec GmbH
|
0.30 |
MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Combine all ingredients of phase B.
Heat both phases separately to 70-75 °C and add phase B to A while stirring. Then homogenise the formulation.
Phase C: Dissolve Cosphaderm® Magnolia Extract 98 in Cosphaderm® Dicapo natural.
Add phase C and phase D to phase A+B after cooling to 40 °C while stirring. Adjust the pH to 5.5 ± 0.05.
SPECIFICATION
Appearance: Light beige, shiny, fluid emulsion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
HYDRATING. RADIANT. SKIN PROTECTING.
Alternative preservation: Cosphaderm® Sodium LAAS, Cosphaderm® GMCY, Cosphaderm® Magnolia Extract 98
| PHASE | Ingredient | Cosmos | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water |
Aqua
|
-
|
70.95 | |
| A | Cosphaderm® Sodium LAAS |
Sodium LevulinateSodium Anisate
|
Cosphatec GmbH
|
1.00 | |
| A | Cosphaderm® Propanediol natural |
Propanediol
|
Cosphatec GmbH
|
4.00 | |
| A | Cosphaderm® X soft |
Xanthan Gum
|
Cosphatec GmbH
|
0.60 | |
| B | Cosphaderm® SF-75H |
Hydrogenated Lecithin
|
Cosphatec GmbH
|
0.75 | |
| C | Cosphaderm® GS Connect |
Glyceryl Stearate Citrate
|
Cosphatec GmbH
|
2.00 | |
| C | Lanette® O |
Cetearyl Alcohol
|
BASF SE
|
1.50 | |
| C | Behenyl Alcohol |
Behenyl Alcohol
|
-
|
1.00 | |
| C | Shea Butter refined |
Butyrospermum Parkii Butter
|
Gustav Heess GmbH
|
5.00 | |
| C | Cosphaderm® GMCY |
Glyceryl Caprylate
|
Cosphatec GmbH
|
0.30 | |
| C | Jojoba Oil |
Simmondsia Chinensis Seed Oil
|
Gustav Heess GmbH
|
3.50 | |
| C | MCT Oil Typ V Ph. Eur. |
Caprylic/Capric Triglyceride
|
Gustav Heess GmbH
|
5.00 | |
| C | Squalane |
Squalane
|
-
|
4.00 | |
| D | Cosphaderm® Magnolia Extract 98 |
Magnolia Officinalis Bark Extract
|
Cosphatec GmbH
|
0.10 | |
| E | Cosphaderm® Tocopharin |
Carnosic AcidTocopherolHelianthus Annuus Seed Oil
|
Cosphatec GmbH
|
0.30 |
MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Add phase B to A while stirring. Then heat the water phase to 70-75 °C.
Phase C: Combine all ingredients of phase C and heat to 75°C. Phase D is added to the oil phase just before emulsion is formed.
Add phase C+D to the water phase while stirring. Homogenise at 40°C.
Add phase E to the emulsion.
Adjust the pH to 5.5 ± 0.05.
SPECIFICATION
Appearance: Light beige, white cream
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
MAKE-UP REMOVING. SOOTHING. GENTLE CLEANSING.
Alternative preservation: Cosphaderm® Hexiol natural
| PHASE | Ingredient | Cosmos | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Shea Butter refined |
Butyrospermum Parkii Butter
|
Gustav Heess GmbH
|
25.70 | |
| A | Kahlwax 2811 |
Oryza Sativa Bran Cera
|
Kahl GmbH & Co. KG
|
8.00 | |
| A | Lanette® O |
Cetearyl Alcohol
|
BASF SE
|
20.00 | |
| A | MCT Oil Typ V Ph. Eur. |
Caprylic/Capric Triglyceride
|
Gustav Heess GmbH
|
10.00 | |
| A | Cetiol® OE |
Dicaprylyl Ether
|
BASF SE
|
15.00 | |
| A | Babassu Oil |
Orbignya Oleifera (Babassu) Seed Oil
|
Gustav Heess GmbH
|
10.00 | |
| B | Span™ 80 |
Sorbitan Oleate
|
Croda Inc.
|
5.00 | |
| B | Plantacare® 2000 UP |
Decyl Glucoside
|
BASF SE
|
4.00 | |
| B | Cosphaderm® Hexiol natural |
1,2-Hexanediol
|
Cosphatec GmbH
|
1.50 | |
| C | Bisabolol |
Bisabolol
|
-
|
0.50 | |
| C | Cosphaderm® Tocopharin |
TocopherolHelianthus Annuus Seed OilCarnosic Acid
|
Cosphatec GmbH
|
0.30 |
Manufacturing Process
Combine all ingredients of phase A and heat to 75-80°C until everything has melted.
Then add phase B to phase A and stir until everything is homogeneous. Add phase C and fill into molds.
Specification
Appearance: Slightly yellowish balm
Stability: stable for 3 months at room temperature and 40 °C
Microbiological stability: proven (Water activity value less than 0.75)
VELVET. REGENERATING. FAST-ABSORBING.
Alternative preservation: Cosphaderm® Sodium LAAS, Cosphaderm® Octiol natural
| PHASE | Ingredient | Cosmos | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Demin. Water |
Aqua
|
-
|
77.70 | |
| A | Glycerin |
Glycerin
|
CREMER OLEO GmbH & Co. KG
|
2.00 | |
| A | Cosphaderm® Sodium LAAS |
Sodium LevulinateSodium Anisate
|
Cosphatec GmbH
|
1.00 | |
| A | Cosphaderm® Octiol natural |
Caprylyl Glycol
|
Cosphatec GmbH
|
0.30 | |
| A | Cosphaderm® X soft |
Xanthan Gum
|
Cosphatec GmbH
|
0.50 | |
| B | Cosphaderm® SF-75H |
Hydrogenated Lecithin
|
Cosphatec GmbH
|
0.50 | |
| C | Cosphaderm® GS Connect |
Glyceryl Stearate Citrate
|
Cosphatec GmbH
|
2.50 | |
| C | Lanette® 16 |
Cetyl Alcohol
|
BASF SE
|
1.20 | |
| C | Shea Butter refined |
Butyrospermum Parkii Butter
|
Gustav Heess GmbH
|
3.00 | |
| C | Jojoba Oil |
Simmondsia Chinensis Seed Oil
|
Gustav Heess GmbH
|
3.00 | |
| C | Cetiol® CC |
Dicaprylyl Carbonate
|
BASF SE
|
2.00 | |
| C | MCT Oil Typ V Ph. Eur. |
Caprylic/Capric Triglyceride
|
Gustav Heess GmbH
|
4.00 | |
| C | Squalane |
Squalane
|
-
|
2.00 | |
| D | Cosphaderm® Tocopharin |
Carnosic AcidTocopherolHelianthus Annuus Seed Oil
|
Cosphatec GmbH
|
0.30 |
MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Add phase B to the water phase while stirring. Then heat the water phase to 70-75 °C.
Phase C: Combine all ingredients of phase C and heat to 75°C.
Add phase C to the water phase while stirring. Add phase D to the emulsion and homogenise.
Adjust the pH to 5.5 ± 0.05.
SPECIFICATION
Appearance: white, slightly beige viscous lotion
pH: 5.5 ± 0.05
Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C
Microbiological stability: proven
PRECISE SHAVING. MILD. GENTLE.
Oil protection: Cosphaderm® Tocopharin
| PHASE | Ingredient | Cosmos | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Softigen® Pura |
Olus Oil
|
IOI Oleo GmbH
|
40.00 | |
| A | MCT Oil Typ V Ph. Eur. |
Caprylic/Capric Triglyceride
|
Gustav Heess GmbH
|
30.00 | |
| A | Cosphaderm® Feel |
Triheptanoin
|
Cosphatec GmbH
|
12.40 | |
| A | Almond Oil |
Prunus Amygdalus Dulcis Oil
|
Gustav Heess GmbH
|
10.00 | |
| A | Babassu Oil |
Orbignya Oleifera Seed Oil
|
Gustav Heess GmbH
|
5.00 | |
| A | Argan Oil |
Argania Spinosa Kernel Oil
|
Gustav Heess GmbH
|
2.00 | |
| A | Cosphaderm® Octiol natural |
Caprylyl Glycol
|
Cosphatec GmbH
|
0.30 | |
| A | Cosphaderm® Tocopharin |
Carnosic AcidTocopherolHelianthus Annuus Seed Oil
|
Cosphatec GmbH
|
0.30 |
MANUFACTURING PROCESS
Combine all ingredients of phase A and melt until everything is homogeneous.
SPECIFICATION
Appearance: Cloudy, thickened oil
Stability: Stable for 3 months at room temperature and 40 °C
Microbiological stability: proven (Water activity value less than 0.75)
VEGAN. SATIN-SOFT FINISH. NOURISHING.
Alternative preservation: Cosphaderm® MultiMEG
| PHASE | Ingredient | Cosmos | INCI | SUPPLIER | % |
|---|---|---|---|---|---|
| A | Shea Butter refined |
Butyrospermum Parkii Butter
|
Gustav Heess GmbH
|
9.90 | |
| A | Carnauba Wax |
Copernicia Cerifera Cera
|
Gustav Heess GmbH
|
6.00 | |
| A | Kahlwax 6290 |
Rhus Verniciflua Cera
|
Kahl GmbH & Co. KG
|
4.00 | |
| A | Kahlwax 6607L |
Helianthus Annuus Seed Cera
|
Kahl GmbH & Co. KG
|
10.00 | |
| A | MCT Oil Typ V Ph. Eur. |
Caprylic/Capric Triglyceride
|
Gustav Heess GmbH
|
17.00 | |
| A | Octyldodecanol |
Octyldodecanol
|
-
|
15.00 | |
| B | Castor Oil |
Ricinus Communis Seed Oil
|
Gustav Heess GmbH
|
20.00 | |
| B | Cosphaderm® MultiMEG |
Glyceryl CaprylatePentylene GlycolMagnolia Officinalis Bark Extract
|
Cosphatec GmbH
|
0.80 | |
| B | Unipure Red LC 381 |
CI 77491
|
SENSIENT BEAUTY
|
6.00 | |
| B | Zinc Oxide |
CI 77947
|
-
|
5.00 | |
| B | Unipure Yellow LC 182 |
CI 77492
|
SENSIENT BEAUTY
|
1.00 | |
| B | Cosphaderm® Tocopharin |
TocopherolHelianthus Annuus Seed OilCarnosic Acid
|
Cosphatec GmbH
|
0.30 | |
| C | CORN PO4 PH "B“ |
Distarch Phosphate
|
Agrana
|
5.00 |
MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and heat to 80-85°C until everything is melted.
Phase B: Disperse phase B. Then add phase B to phase A.
Phase C: Add phase C to the finished formulation and melt again.
Pour into molds.
SPECIFICATION
Appearance: Red stick
Stability: Microbiological stability proven (Water activity value less than 0.75)
Sie sehen gerade einen Platzhalterinhalt von Brevo. Um auf den eigentlichen Inhalt zuzugreifen, klicken Sie auf die Schaltfläche unten. Bitte beachten Sie, dass dabei Daten an Drittanbieter weitergegeben werden.
Mehr InformationenSie müssen den Inhalt von reCAPTCHA laden, um das Formular abzuschicken. Bitte beachten Sie, dass dabei Daten mit Drittanbietern ausgetauscht werden.
Mehr InformationenSie sehen gerade einen Platzhalterinhalt von Facebook. Um auf den eigentlichen Inhalt zuzugreifen, klicken Sie auf die Schaltfläche unten. Bitte beachten Sie, dass dabei Daten an Drittanbieter weitergegeben werden.
Mehr InformationenSie sehen gerade einen Platzhalterinhalt von Instagram. Um auf den eigentlichen Inhalt zuzugreifen, klicken Sie auf die Schaltfläche unten. Bitte beachten Sie, dass dabei Daten an Drittanbieter weitergegeben werden.
Mehr Informationen