DAILY FACIAL CREAM

Manufacturing Process Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Phase B: Combine all ingredients of phase B. Heat both phases separately to 70 °C and add phase B to A while stirring very fast. Adjust the pH to 5.5 +_ 0.05. Specification Appearance: White cream pH: 5.5 +_ 0.05 Stability: Microbiological stability proven, no separation after centrihas not

RICH NIGHT MOISTURISER

Manufacturing Process Phase A: Mix phase A and stir until everything is completely dissolved. Phase B: Add phase B to phase A and stir until dispersed. Phase C: Slowly add phase C to phase A+B and stir until complete dissolution. Phase D: Mix all ingredients of phase D and heat phase A+B+C and D separately to 80 °C. Add phase D slowly to phase A+B+C while stirring. Phase E: Add Panthenol to the finishehas not

URBAN ANTI-POLLUTION SKIN ELIXIR

Manufacturing Process Phase A: Prepare phase A and stir until complete dissolution. Phase B: Prepare phase B and heat to 50 °C until everything is melted. Let the mixture cool down to room temperature. Add phase B to phase A and homogenise for 3 minutes. Adjust the pH to 5.5 +_ 0.05. Specification Appearance: White, shiny emulsion pH: 5.5 +_ 0.05 Stability: Microbiological stability proven, no sepahas not

BLACK PEELING MASK

Manufacturing Process Phase A: Combine all ingredients of phase A and raise the pH to 11 to dissolve the cinnamic acid completely. Afterwards, adjust the pH to 5.5 +_ 0.05 by adding Citric Acid. Phase B: Prepare phase B and heat phase A and phase B separately to 75 °C. Add phase B to phase A under thorough stirring with the propeller stirrer and homogenise the mixture. Phase C: Add Cosphaderm® Magnolia has not
Jetzt für den Newsletter anmelden!

HYDRO BOOST LIP BALM

MANUFACTURING PROCESS Combine all ingredients of phase A, heating to 80-85 °C. When everything has melted, take off heat and fill into packaging. SPECIFICATION Appearance: Solid, yellowish balm Stability: Microbiological stability proven (Water activity value less than 0.75)has not

IN-SHOWER BODY LOTION

Manufacturing Process Phase A: Combine all ingredients of phase A under stirring and stir until Cosphaderm® X 34 is completely dissolved. Phase B: Combine all ingredients of phase B. Heat both phases separately to 70 °C and add phase B to phase A under stirring. Homogenise the formulation and adjust the pH to 5.5 +_ 0.05. Specification Appearance: White, shiny emulsion pH: 5.5 +_ 0.05 Stability: has not

RICH & SOFT HANDCREAM

Manufacturing Process Phase A: Mix all ingredients together. Slowly add Cosphaderm® X 34 while stirring. Then heat to 80 °C. Phase B: Combine all ingredients and heat to 80 °C. Add phase B to phase A and homogenise. Phase C: Add Cosphaderm® MultiMEG below 40 °C while stirring. Adjust the pH to 5.5 +_ 0.05. Specification Appearance: White, shiny emulsion pH: 5.5 +_ 0.05 Stability: Microbiologihas not

DEODORANT CREAM

MANUFACTURING PROCESS Combine all ingredients of phase A, heating to 75 °C. When everything has melted, add phase B. Take off heat and fill into packaging. SPECIFICATION Appearance: Solid, yellowish balm Stability: Microbiological stability proven (Water activity value less than 0.75)has not
×
FÜR UNSEREN NEWSLETTER ANMELDEN!
Bleiben Sie immer auf dem Laufenden! Wir senden Ihnen in unregelmäßigen Abständen Neuigkeiten und Updates über unser Unternehmen, Markteinblicke und neueste Innovationen.
[borlabs-cookie id="google-recaptcha" type="content-blocker"] [/borlabs-cookie]