MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A. Stir until everything is completely dissolved. Afterwards, adjust the pH to 5.5 - 6.0 by adding diluted Citric Acid. Phase B: Combine all ingredients and heat to 75-80 °C. Then add phase B to phase A while homogenising. Add phase C to the finished formulation and homogenise. SPECIFICATION Appearance: White emulsion Stability: Microbiohas not

MANUFACTURING PROCESS Phase A: Mix all ingredients together and heat to 80-85 °C until everything is melted. Phase B: Add all ingredients of phase B to phase A at 70°C. Phase C: Premix the pigments in the oils until everything is homogeneous and add it to the hot phase A+B and fill into packaging. SPECIFICATION Appearance: solid stick Stability: Microbiological stability proven (Water activity valuehas not

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Heat to 70-75 °C. Phase B: Combine all ingredients of phase B and heat to 75°C. Phase C is added to the oil phase just before emulsion is formed. Add phase B+C to the water phase while stirring. Homogenise at 40°C. Adjust the pH to 5.5 ± 0.05. SPECIFICATION Appearance: White cream has not

MANUFACTURING PROCESS Phase A: Prepare phase A and heat to 60-65 °C. Stir until complete dissolution. Phase B: Let the mixture cool down and add phase B at room temperature. Phase C: Add colour as desired. SPECIFICATION Appearance: Yellowish oil gel Stability: Microbiological stability proven (Water activity value less than 0.75)has not

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Heat the water phase to 70-75 °C. Phase B: Combine all ingredients of phase B and heat to 75°C. Phase C is added to the oil phase just before emulsion is formed. Add phase B+C to the water phase while stirring. Homogenise at 40°C. Adjust the pH to 5.5 +_ 0.05. SPECIFICATION Appearanhas not

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and stir until dispersed. Phase B: Prepare phase B and lower the pH to ~ 5.5. Add phase C and phase A to phase B. Adjust the pH to 5.5 +_ 0.05. Heat the prepared solution to 80 - 90 °C and stir at this temperature for 2 – 3 min. Quickly pour the warm mixture into moulds and let it cool down. SPECIFICATION Appearance: Clear, solidhas not

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Phase B: Add phase B to A carefully to avoid foaming. Adjust the pH to 5.5 +_ 0.05. Phase C: Add phase C to the final formulation while stirring. SPECIFICATION Appearance: Transparent gel with small peeling beads pH: 5.5 +_ 0.05 Stability: Microbiological stability proven, no separatihas not

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Phase B: Add phase B to A while stirring. Then heat phase A+B to 75 °C. Phase C: Combine all ingredients of phase C and heat to 75 °C. Then add phase C to phase A+B under strong stirring and homogenise the formulation. Adjust the pH to 4.5 +_ 0.05. SPECIFICATION Appearance: White crehas not