MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Heat to 70-75 °C. Phase B: Combine all ingredients of phase B and heat to 75°C. Phase C is added to the oil phase just before emulsion is formed. Add phase B+C to the water phase while stirring. Homogenise at 40°C. Adjust the pH to 5.5 ± 0.05. SPECIFICATION Appearance: White cream has not

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Heat the water phase to 70-75 °C. Phase B: Combine all ingredients of phase B and heat to 75°C. Phase C is added to the oil phase just before emulsion is formed. Add phase B+C to the water phase while stirring. Homogenise at 40°C. Adjust the pH to 5.5 +_ 0.05. SPECIFICATION Appearanhas not

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Adjust the pH to 5.5 +_ 0.05. Phase B: Combine all ingredients of phase B. Heat phase B to 80 °C and slowly add phase A to B while homogenising. SPECIFICATION Appearance:  White emulsion pH: 5.5 +_ 0.05 Stability: Microbiological stability proven, no separation after centrifugation has not

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and stir until dispersed. Phase B: Prepare phase B and lower the pH to ~ 5.5. Add phase C and phase A to phase B. Adjust the pH to 5.5 +_ 0.05. Heat the prepared solution to 80 - 90 °C and stir at this temperature for 2 – 3 min. Quickly pour the warm mixture into moulds and let it cool down. SPECIFICATION Appearance: Clear, solidhas not

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Phase B: Add phase B to A carefully to avoid foaming. Adjust the pH to 5.5 +_ 0.05. Phase C: Add phase C to the final formulation while stirring. SPECIFICATION Appearance: Transparent gel with small peeling beads pH: 5.5 +_ 0.05 Stability: Microbiological stability proven, no separatihas not

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Phase B: Combine all ingredients of phase B. Heat both phases separately to 70-75 °C and add phase B to A while stirring. Then homogenise the formulation. Phase C: Dissolve Cosphaderm® Magnolia Extract 98 in Cosphaderm® Dicapo natural. Add phase C and phase D to phase A+B after cooling has not

MANUFACTURING PROCESS Phase A: Combine the ingredients of phase A. Raise the pH to 11 to dissolve Cosphagard® SA natural. When everything is dissolved, lower the pH back to 4-5 again. Phase B: Add all ingredients from phase B one after another. Adjust the pH to 4.0 +_ 0.05. SPECIFICATION Appearance: Clear solution pH: 4.0 +_ 0.05 Stability: Microbiological stability proven, no separation after centrhas not

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Phase B: Slowly add phase B to A while stirring. Phase C: Mix all ingredients of phase C and add to phase A+B while stirring. Adjust the pH to 5.0 +_ 0.05. SPECIFICATION Appearance: Clear solution pH: 5.0 +_ 0.05 Stability: Microbiological stability proven, no separation after centrifhas not