MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and stir until dispersed. Phase B: Prepare phase B and lower the pH to ~ 5.5. Add phase C and phase A to phase B. Adjust the pH to 5.5 +_ 0.05. Heat the prepared solution to 80 - 90 °C and stir at this temperature for 2 – 3 min. Quickly pour the warm mixture into moulds and let it cool down. SPECIFICATION Appearance: Clear, solidhas not

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Phase B: Add phase B to A while stirring. Then heat phase A+B to 75 °C. Phase C: Combine all ingredients of phase C and heat to 75 °C. Then add phase C to phase A+B under strong stirring and homogenise the formulation. Adjust the pH to 4.5 +_ 0.05. SPECIFICATION Appearance: White crehas not

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Phase B: Add Cosphaderm® SF-75H to phase A and let it soak for 10-20 minutes. Then heat phase A+B to 70 °C. Phase C: Combine all ingredients of phase C and heat to 70 °C. Add then phase C to phase A+B under strong stirring and homogenise the formulation. Adjust the pH to 5.0 +_ 0.05. has not

Manufacturing Process Phase A: Combine all ingredients of phase A and stir until everything is dissolved. Phase B: Add phase B to phase A under stirring. Phase C: Combine all ingredients of phase C separately. Add then phase C to phase A and B under stirring. Adjust pH to 5.5 +_ 0.05. Specification Appearance: Transparent solution pH: 5.5 +_ 0.05 Stability: Microbiological stability proven, no sepahas not

Manufacturing Process Phase A: Combine all ingredients of phase A and stir until everything is dissolved. Phase B: Slowly add phase B to phase A under stirring. Stir until complete dissolution. Adjust pH to 5.5 +_ 0.05 and heat phase A and B to 70 °C. Phase C: Combine all ingredients and heat phase C to 70 °C. Add then phase C to phase A and B under strong stirring and homogenise the formulation. Adjuhas not

Manufacturing Process Phase A: Combine all ingredients of phase A and stir until everything is dissolved. Phase B: Combine all ingredients and heat phase B to 40 – 50 °C. Afterwards combine phase A and B while stirring slowly until a homogeneous gel is formed. Phase C: Add panthenol to the mixture (<40 °C). Adjust pH to 5.5 +_ 0.05. Specification Appearance: Yellowish, slightly turbid, viscoushas not

Manufacturing Process Phase A: Combine all ingredients of phase A under stirring and stir until Cosphaderm® X 34 is completely dissolved. Phase B: Combine all ingredients of phase B. Heat both phases separately to 70 °C and add phase B to phase A under stirring. Homogenise the formulation and adjust the pH to 5.5 +_ 0.05. Specification Appearance: White, shiny emulsion pH: 5.5 +_ 0.05 Stability: has not

Manufacturing Process Phase A: Combine all ingredients of phase A. Raise the pH to 11 to dissolve Cosphagard® SA natural. Heat phase A to 70 °C. Phase B: Combine all ingredients and stir until Cosphaderm® X 34 is completely dissolved. Heat phase B to 70 °C. Add phase B to phase A under very soft stirring. Phase C: Add phase C below 40 °C to the finished formulation. Adjust the pH to 4.5 +_ 0.05. Thas not