ANTI SPOT GEL

Manufacturing Process Phase A: Combine all ingredients of phase A. Raise the pH to 11 to dissolve Cosphagard® SA natural. When everything is dissolved, lower the pH back to 4-5 again. Phase B: Combine Glycerin, Cosphaderm® X 34 and Cosphaderm® Sodium Hyaluronate high and stir until the powder is wetted. Then add it to phase A. Phase C: Add phase C under stirring. Adjust the pH to 4.0 +_ 0.05. Specifhas not

ANTI-WRINKLE BASE

Manufacturing Process Phase A: Disperse the thickeners in glycerol and Cosphaderm® Propanediol natural. Phase B: Add demin. water and stir until everything is dissolved. Phase C: Add phase C to A/B. Adjust the pH to 5.5 +_ 0.05. Specification Appearance: Translucent gel pH: 5.5 +_ 0.05 Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)has not

BHA LIQUID PEELING

MANUFACTURING PROCESS Phase A: Combine the ingredients of phase A. Raise the pH to 11 to dissolve Cosphagard® SA natural. When everything is dissolved, lower the pH back to 4-5 again. Phase B: Add phase B to A while stirring. Adjust the pH to 4.0 +_ 0.05. SPECIFICATION Appearance: Clear solution pH: 4.0 +_ 0.05 Stability: Microbiological stability proven, no separation after centrifugation (4000 rpmhas not

BOOSTING SERUM

Manufacturing Process Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Phase B: Combine all ingredients of phase B separately and add to phase A under stirring. Adjust pH to 5.5 +_ 0.05 if necessary. Specification Appearance: Transparent serum pH: 5.5 +_ 0.05 Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 minhas not
Jetzt für den Newsletter anmelden!

SKIN PERFECTING TONER

Manufacturing Process Phase A: Combine all ingredients of phase A. Raise the pH to 11 to dissolve Cosphagard® SA natural completely. Phase B: Add phase B and lower the pH to 4.0 +_ 0.05. Specification Appearance: Clear solution pH: 4.0 +_ 0.05 Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)has not

ANTI-POLLUTION SERUM

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Phase B: Combine all ingredients of phase B. Heat both phases separately to 70-75 °C and add phase B to A while stirring. Then homogenise the formulation. Phase C: Dissolve Cosphaderm® Magnolia Extract 98 in Cosphaderm® Dicapo natural. Add phase C and phase D to phase A+B after cooling has not

ANTI-WRINKLE EYE CREAM

Manufacturing Process Phase A: Combine all ingredients of phase A under stirring until Cosphaderm® X 34 is completely dissolved. Phase B: Combine all ingredients of phase B. Heat both phases separately to 70 °C and add phase B to phase A under stirring. After stirring for 5 minutes homogenise the formulation and adjust the pH to 5.5 +_ 0.05. Specification Appearance: White, shiny emulsion pH: 5.5 +has not

HAPPY BARRIER CREAM

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Phase B: Add phase B to A while stirring. Phase C: Add phase C to the water phase while stirring. Then heat the water phase to 70-75 °C. Phase D: Combine all ingredients of phase D and heat to 75°C. Phase E is added to the oil phase just before emulsion is formed. Add phase D+E to the wahas not
×
FÜR UNSEREN NEWSLETTER ANMELDEN!
Bleiben Sie immer auf dem Laufenden! Wir senden Ihnen in unregelmäßigen Abständen Neuigkeiten und Updates über unser Unternehmen, Markteinblicke und neueste Innovationen.
[borlabs-cookie id="brevo" type="content-blocker"] [/borlabs-cookie]