MANUFACTURING PROCESS Phase A: Prepare phase A. Raise the pH to 10 to dissolve Cosphaderm® pAS natural and stir until everything is completely dissolved. Afterwards, adjust the pH to 5.5 ± 0.05 by adding Citric Acid. Phase B: Add all ingredients of phase B to phase A. Then heat phase A+B to 75 °C. Phase C: Combine all ingredients and heat to 75 °C. Add then phase C to phase A+B under strong stirring anhas not

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and raise the pH to 10 to dissolve Cosphaderm® pAS natural. Stir until everything is completely dissolved. Afterwards, adjust the pH to 5.5 +_ 0.05 by adding Citric Acid. Phase B: Add all ingredients of phase B to phase A. Phase C: Combine all ingredients and heat to 80 °C. Then add phase A/B to phase C while homogenising. Add phase D to has not

Manufacturing Process Phase A: Combine all ingredients of phase A. Raise the pH to 11 to dissolve Cosphagard® SA natural and Cosphaderm® pAS natural. Heat phase A to 70 °C. Phase B: Combine all ingredients and stir until Cosphaderm® X 34 is completely dissolved. Heat phase B to 70 °C. Add phase B to phase A under very soft stirring. Phase C: Add phase C below 40 °C to the finished formulation. Adjhas not

Manufacturing Process Phase A: Combine all ingredients of phase A. Raise the pH to 11 to dissolve Cosphagard® SA natural and Cosphaderm® AS. Heat phase A to 70 °C. Phase B: Combine all ingredients and stir until Cosphaderm® X 34 is completely dissolved. Heat phase B to 70 °C. Add phase B to phase A under very soft stirring. Phase C: Add phase C below 40 °C to the finished formulation. Adjust the phas not

Manufacturing Process Phase A: Prepare phase A. Raise the pH to 10 to dissolve Cosphaderm® AS and stir until everything is completely dissolved. Afterwards, adjust the pH to 5.5 +_ 0.05 by adding Citric Acid. Phase B: Prepare phase B and homogenise for 5 minutes with high performance disperser (stator/rotor) at max. speed. Add phase B to phase A in small steps under stirring. Adjust pH value to 5.5 +_ 0has not

Manufacturing Process Phase A: Prepare phase A. Raise the pH to 10 to dissolve Cosphaderm® pAS natural and stir until everything is completely dissolved. Afterwards, adjust the pH to 5.5 +_ 0.05 by adding Citric Acid. Phase B: Prepare phase C and homogenise for 5 minutes with high performance disperser (stator/rotor) at max. speed. Add phase B to phase A in small steps under stirring. Adjust pH value tohas not